共查询到20条相似文献，搜索用时 359 毫秒
1.
针对背景噪声下结构的模态参数识别结果存在虚假模态的情况,分析虚假模态产生的原因,通过理论推导提出辨别虚假模态的判断条件,根据判断条件剔除识别模态参数中包含的虚假模态。以比例阻尼海洋平台结构数值模型为例,在模拟噪声水平5%的工况下,获得结构脉冲响应信号,对基于奇异值分解定阶消噪后的信号用复指数法进行模态参数识别,对识别的模态频率和阻尼比进行虚假模态剔除。结果表明:根据判断条件可有效剔除所识别参数中的虚假模态。 相似文献
2.
3.
4.
研究特征系统实现算法在模态识别过程中的噪声处理问题。特征系统实现算法为目前土木工程领域应用较为广泛的一种模态识别法。在处理实测数据时,特征系统实现算法将实测数据分解为结构真实信号和噪声信号,从而将噪声消除。分块Hankel矩阵的维数对信噪分离过程影响很大。提出当分块Hankel矩阵的分块行与分块列数接近时,真实和噪声信号可以最好的分离。通过在实测信号里添加噪声(产生噪声-噪声信号),将实测信号和噪声-噪声信号识别的结果进行比较,提出了1种验证识别模态参数是否为结构真实模态的检验方法。本文应用导管架平台实例来验证提出方法的适用性。结果表明,当分块Hankel矩阵的分块行与分块列数接近时,真实和噪声信号能够有效地分离,此时添加的噪声主要影响噪声信号部分。由实测信号和噪声-噪声信号识别的模态参数非常吻合。 相似文献
5.
研究特征系统实现算法在模态识别过程中的噪声处理问题.特征系统实现算法为目前土木工程领域应用较为广泛的一种模态识别法.在处理实测数据时,特征系统实现算法将实测数据分解为结构真实信号和噪声信号,从而将噪声消除.分块Hankel矩阵的维数对信噪分离过程影响很大.提出当分块Hankel矩阵的分块行与分块列数接近时,真实和噪声信号可以最好的分离.通过在实测信号里添加噪声(产生噪声-噪声信号),将实测信号和噪声—噪声信号识别的结果进行比较,提出了1种验证识别模态参数是否为结构真实模态的检验方法.本文应用导管架平台实例来验证提出方法的适用性.结果表明,当分块Hankel矩阵的分块行与分块列数接近时,真实和噪声信号能够有效地分离,此时添加的噪声主要影响噪声信号部分.由实测信号和噪声噪声信号识别的模态参数非常吻合. 相似文献
6.
7.
《海洋技术学报》2018,(5)
损伤识别是海洋平台结构健康监测的核心问题,对于保障结构的安全服役具有重要的意义。文中将交叉模型交叉模态(CMCM)有限元模型修正方法应用到了导管架式海洋平台结构的损伤识别中。针对实测模态含噪声条件下该方法遇到的"病态"求解难题,引入了截断奇异值分解正则化方法,提出了基于正则化模型修正的损伤识别过程。为验证该过程的有效性,制做了某导管架平台的钢质缩尺简化模型,并在两个典型构件处设置了损伤;利用冲击激励对结构进行了振动测试;根据模态识别结果,采用正则化模型修正过程对各损伤工况进行了损伤识别。结果表明,利用有限的低阶含噪声模态,借助正则化求解技术,该模型修正方法可有效地识别导管架平台结构的损伤。 相似文献
8.
实测信号中的噪声,以及模型阶次的不确定性给模态参数的准确识别带来困难。以提高模态参数识别精度为目标,提出基于模型定阶和信噪分离的复指数模态参数识别方法。该方法借助奇异值分解技术确定模型阶次,采用结构低秩逼近方法进行信噪分离。在此基础上,利用复指数法进行模态参数识别。分别选取一维的悬臂梁模型和二维的悬挂板模型进行物理模型实验,结果表明:该方法提高模态参数的识别精度,尤其是阻尼比的识别精度,具有较好的工程应用前景。 相似文献
9.
以某导管架平台为模型,对分别存在腐蚀和桩基冲刷影响的结构进行模态分析,表明在腐蚀和桩基冲刷的影响下海洋平台的模态参数有明显的时变效应。基于频率变化和神经网络算法的损伤识别方法有较好的记忆能力和泛化能力,可准确识别结构损伤程度。忽略腐蚀和桩基冲刷的影响,基于神经网络算法的损伤识别结果产生较大误差,难以对损伤程度实现有效识别。考虑腐蚀和桩基冲刷影响,提出基于神经网络算法的海洋平台损伤识别方法的改进方案。数值研究表明,改进方法识别误差很小,可对损伤程度实现有效识别。 相似文献
10.
提出将基于动态特性的检测方法与局部物理检测手段相结合的探伤思路。利用动力学方法进行实时监测及损伤区域的粗略定位,再由物理探测方法实现损伤程度和位置的精确判断,从而降低对动态检测方法的精度要求。此外,文中尝试直接由结构的动力响应信号构建能量指标识别结构损伤的方法,不需要进行模态参数识别,算法简单,有望应用于海洋平台、高层建筑等可简化为串联多自由度体系的结构的实时监测和损伤初步定位。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
16.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.