首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 453 毫秒
1.
The northern Norwegian-Greenland Sea opened up as the Knipovich Ridge propagated from the south into the ancient continental Spitsbergen Shear Zone. Heat flow data suggest that magma was first intruded at a latitude of 75° N around 60 m.y.b.p. By 40–50 m.y.b.p. oceanic crust was forming at a latitude of 78° N. At 12 m.y.b.p. the Hovgård Transform Fault was deactivated during a northwards propagation of the Knipovich Ridge. Spreading is now in its nascent stages along the Molloy Ridge within the trough of the Spitsbergen Fracture Zone. Spreading rates are slower in the north than the south. For the Knipovich Ridge at 78° N they range from 1.5–2.3 mm yr-1 on the eastern flank to 1.9–3.1 mm yr-1 on the western flank. At a latitude of 75° N spreading rates increase to 4.3–4.9 mm yr-1.Thermal profiles reveal regions of off-axial high heat flow. They are located at ages of 14 m.y. west and 13 m.y. east of the northern Knipovich Ridge, and at 36 m.y. on the eastern flank of the southern Knipovich Ridge. These may correspond to episodes of increased magmatic activity; which may be related to times of rapid north-wards rise axis propagation.The fact that the Norwegian-Greenland Sea is almost void of magnetic anomalies may be caused by the chaotic extrusion of basalts from a spreading center trapped within the confines of an ancient continental shear zone. The oblique impact of the propagating rift with the ancient shear zone may have created an unstable state of stress in the region. If so, extension took place preferentially to the northwest, while compression occurred to the southeast between the opening, leaking shear zone and the Svalbard margin. This caused faster spreading rates to the northwest than to the southeast.  相似文献   

2.
李凯  宋立军  东玉  李爱荣 《海洋学报》2019,41(3):96-105
塔斯曼海位于西南太平洋地区,处于印度-澳大利亚板块和西兰板块之间,大地构造背景复杂。该地区是全球油气资源勘探的重点海域之一,但是国内对该地区的研究相当匮乏。本文根据塔斯曼海海域的自由空气重力异常对塔斯曼海海域的构造单元进行了划分,前人关于塔斯曼海的研究主要集中在Resolution海岭北部,我们认为塔斯曼海的范围应包括Resolution海岭以南,麦夸里海岭以西,塔斯曼断裂带以东的区域（即南部次盆）。结果显示,塔斯曼海域及邻区包括3个一级构造单元:东澳大利亚陆缘、西兰板块和塔斯曼海盆,且塔斯曼海盆可进一步划分为西部次盆、东部次盆和南部次盆。本文基于塔斯曼海域90 Ma以来的洋壳年龄数据编制了构造演化图,将塔斯曼海的形成演化过程分为4个阶段:（1）中生代陆内裂谷期（90~83 Ma BP）;（2）塔斯曼海扩张阶段（83~61 Ma BP）;（3）塔斯曼海北部扩张停止阶段（61~52 Ma BP）;（4）塔斯曼海南部改造阶段（52 Ma BP至今）。  相似文献   

3.
Crustal Thinning of the Northern Continental Margin of the South China Sea   总被引：2，自引：0，他引：2  
Magnetic data suggest that the distribution of the oceanic crust in the northern South China Sea (SCS) may extend to about 21 °N and 118.5 °E. To examine the crustal features of the corresponding continent–ocean transition zone, we have studied the crustal structures of the northern continental margin of the SCS. We have also performed gravity modeling by using a simple four-layer crustal model to understand the geometry of the Moho surface and the crustal thicknesses beneath this transition zone. In general, we can distinguish the crustal structures of the study area into the continental crust, the thinned continental crust, and the oceanic crust. However, some volcanic intrusions or extrusions exist. Our results indicate the existence of oceanic crust in the northernmost SCS as observed by magnetic data. Accordingly, we have moved the continent–ocean boundary (COB) in the northeastern SCS from about 19 °N and 119.5 °E to 21 °N and 118.5 °E. Morphologically, the new COB is located along the base of the continental slope. The southeastward thinning of the continental crust in the study area is prominent. The average value of crustal thinning factor of the thinned continental crust zone is about 1.3–1.5. In the study region, the Moho depths generally vary from ca. 28 km to ca. 12 km and the crustal thicknesses vary from ca. 24 km to ca. 6 km; a regional maximum exists around the Dongsha Island. Our gravity modeling has shown that the oceanic crust in the northern SCS is slightly thicker than normal oceanic crust. This situation could be ascribed to the post-spreading volcanism or underplating in this region.  相似文献   

4.
The Central Spreading Ridge (CSR) is located in the central part of the North Fiji Basin, a complex back-arc basin created 12 Ma ago between the Pacific and Indo-Australian plates. The 3.5 Ma old CSR is the best developed, for both structure and magmatism, of all the spreading centers identified in the basin, and may be one of the largest spreading systems of the west Pacific back-arc basins. It is more than 800 km long and 50–60 km wide, and has been intensively explored during the French-Japanese STARMER project (1987–1991).The CSR is segmented into three first order segments named, from north to south, N160°, N15° and N-S according to their orientation. This segmentation pattern is similar to that found at mid-ocean ridges. The calculated spreading rate is intermediate and ranges from 83 mm/yr at 20°30 S to 50 mm/yr at 17°S. In addition, there is a change in the axial ridge morphology and gravity structure between the northern and southern sections of the CSR. The axial morphology changes from a deep rift valley (N160° segment), to a dome split by an axial graben (N15° segment) and to a rectangular flat top high (N-S segment). The Mantle Bouguer Anomalies obtained on the northern part of the CSR (N160°/N15° segments) show bull's eye structures associated with mantle upwelling at the 16°50S triple junction and also in the middle of the segments. The Mantle Bouguer Anomalies of the southern part of the ridge (N-S segment) are more homogeneous and consistent with the observed smooth topography associated with axial isostatic compensation.At these intermediate spreading rates the contrast in bathymetry and gravity structure between the segments may reflect differences in heat supply. We suggest that the N160° and N15° segments are cold with respect to the hot N-S segment. We use a non-steady-state thermal model to test this hypothesis. In this model, the accretion is simulated as a nearly steady-state seafloor spreading upon which are superimposed periodic thermal inputs. With the measured spreading rate of 50 mm/yr, a cooling cycle of 200,000 yr develops a thermal state that permits to explain the axial morphology and gravity structure observed on the N160° segment. A spreading rate of 83 mm/yr and a cooling cycle of 120,000 yr would generate the optimal thermal structure to explain the characteristics of the N-S segment. The boundaries between the hot N-S segment and its cold bounding segments are the 18°10 S and 20°30 S propagating rifts. A heat propagation event along the N-S segment at the expense of the adjacent colder failing segments, can explain the sharp changes in the observed morphology and structure between the segments.  相似文献   

5.
A detailed survey of a 1°×1°-square of seafloor 100 miles south-east of the Azores shows a strong correlation between directions of regional topographic and magnetic lineations. The area is dissected by the East Azores Fracture Zone at 36°55N, identified as the active Eurasian-African plate boundary, and by another large, non-active fracture zone at 36°10N. Both fracture zones strike 265° and are accompanied by large amplitude magnetic anomalies. The general strike in the area in between is 000°–015°. The skewing effect at this magnetic latitude is very sensitive to variations in strike of the magnetic contrasts. This effect was eliminated by a non-linear transformation which also gives the positions of magnetic contrasts. Some N-S contrasts were identified as sea floor spreading polarity contrasts (anomalies 31 and 32). Weak contrasts could be identified as topographic effects and gave a magnetization intensity of 5 A m-1. The identified sea floor spreading anomalies to both sides of the fracture zone at 36°10N agree very well, also quantatively, with a three-dimensional model for the fracture zone anomalies. This model describes the non-linear anomalies as end effects of the magnetic layer which is divided in blocks of alternating polarity.  相似文献   

6.
Fault patterns at outer trench walls   总被引：1，自引：0，他引：1  
Profiles across subduction-related trenches commonly show normal faulting of the outer trench wall. Such faulting is generally parallel or sub-parallel to the trench and is ascribed to tension in the upper part of the oceanic plate as it is bent into the subduction zone. A number of authors have noted that outer trench wall faulting may involve re-activation of the oceanic spreading fabric of the subducting plate, even when the trend of this fabric is noticeably oblique to the extensional stress direction. However, one previous review of outer trench wall fault patterns questioned the occurrence of a consistent link between fault orientation and such controlling factors. This latter study predated the widespread availability of swath bathymetry and longrange sidescan sonar data over trenches. Based only on profile data, it was unable to analyse fault patterns with the accuracy now possible. This paper therefore re-examines the relationship between outer trench wall faulting and the structure of the subduction zone and subducting plate using GLORIA and Seabeam swath mapping data from several locations around the Pacific and Indian Oceans. The principal conclusions is that the trend of outer trench wall faults is almost always controlled by either the subducting slab strike or by the inherited oceanic spreading fabric in the subducting plate. The latter control operates when the spreading fabric is oblique to the subducting slab strike by less than 25–30°; in all other cases the faults are parallel to slab strike (and parallel or sub-parallel to the trench). Where the angle between spreading fabric and slab strike is close to 30°, two fault trends may coexist; evidence from the Aleutian Trench indicates a gradual change from spreading fabric to slab strike control of fault trend as the angle between the two increases from 25 to 30°. The only observed exception to the above rule of fault control comes from the western Aleutian Trench, where outer trench wall faults are oblique to the slab strike, almost perpendicular to the spreading fabric, and parallel to the convergence direction. Re-orientation of the extensional stress direction due to right-lateral shear at this highly oblique plate boundary is the best explanation of this apparently anomalous observation.  相似文献   

7.
The Easter microplate-Crough Seamount region located between 25° S–116° W and 25° S–122° W consists of a chain of seamounts forming isolated volcanoes and elongated (100–200 km in length) en echelon volcanic ridges oriented obliquely NE (N 065°), to the present day general spreading direction (N 100°) of the Pacific-Nazca plates. The extension of this seamount chain into the southwestern edge of the Easter microplate near 26°30 S–115° W was surveyed and sampled. The southern boundary including the Orongo fracture zone and other shallow ridges (< 2000 m high) bounding the Southwest Rift of the microplate consists of fault scarps where pillow lava, dolerite, and metabasalts are exposed. The degree of rock alternation inferred from palagonitization of glassy margins suggests that the volcanic ridges are as old as the shallow ridges bounding the Southwest Rift of the microplate. The volcanics found on the various structures west of the microplate consist of depleted (K/Ti < 0.1), transitional (K/Ti = 0.11–0.25) and enriched (K/Ti > 0.25) MORBs which are similar in composition to other more recent basalts from the Southwest and East Rifts spreading axes of the Easter microplate. Incompatible element ratios normalized to chondrite values [(Ce/Yb)N = 1–2.5}, {(La/Sm)N = 0.4–1.2} and {(Zr/Y)N = 0.7–2.5} of the basalts are also similar to present day volcanism found in the Easter microplate. The volcanics from the Easter microplate-Crough region are unrelated to other known South Pacific intraplate magmatism (i.e. Society, Pitcairn, and Salas y Gomez Islands). Instead their range in incompatible element ratios is comparable to the submarine basalts from the recently investigated Ahu and Umu volcanic field (Easter hotspot) (Scientific Party SO80, 1993) and centered at about 80 km west of Easter Island. The oblique ridges and their associated seamounts are likely to represent ancient leaky transform faults created during the initial stage of the Easter microplate formation ( 5 Ma). It appears that volcanic activity on seamounts overlying the oblique volcanic ridges has continued during their westward drift from the microplate as shown by the presence of relatively fresh lava observed on one of these structures, namely the first Oblique Volcanic Ridge near 25° S–118° W at about 160 km west of the Easter microplate West Rift. Based on a reconstruction of the Easter microplate, it is suggested that the Crough seamount (< 800 m depth) was formed by earlier (7–10 Ma) hotspot magmatic activity which also created Easter Island.  相似文献   

8.
New swath bathymetric, multichannel seismic and magnetic data reveal the complexity of the intersection between the extinct West Scotia Ridge (WSR) and the Shackleton Fracture Zone (SFZ), a first-order NW-SE trending high-relief ridge cutting across the Drake Passage. The SFZ is composed of shallow, ridge segments and depressions, largely parallel to the fracture zone with an `en echelon' pattern in plan view. These features are bounded by tectonic lineaments, interpreted as faults. The axial valley of the spreading center intersects the fracture zone in a complex area of deformation, where N120° E lineaments and E–W faults anastomose on both sides of the intersection. The fracture zone developed within an extensional regime, which facilitated the formation of oceanic transverse ridges parallel to the fracture zone and depressions attributed to pull-apart basins, bounded by normal and strike-slip faults.On the multichannel seismic (MCS) profiles, the igneous crust is well stratified, with numerous discontinuous high-amplitude reflectors and many irregular diffractions at the top, and a thicker layer below. The latter has sparse and weak reflectors, although it locally contains strong, dipping reflections. A bright, slightly undulating reflector observed below the spreading center axial valley at about 0.75 s (twt) depth in the igneous crust is interpreted as an indication of the relict axial magma chamber. Deep, high-amplitude subhorizontal and slightly dipping reflections are observed between 1.8 and 3.2 s (twt) below sea floor, but are preferentially located at about 2.8–3.0 s (twt) depth. Where these reflections are more continuous they may represent the Mohorovicic seismic discontinuity. More locally, short (2–3 km long), very high-amplitude reflections observed at 3.6 and 4.3 s (twt) depth below sea floor are attributed to an interlayered upper mantle transition zone. The MCS profiles also show a pattern of regularly spaced, steep-inclined reflectors, which cut across layers 2 and 3 of the oceanic crust. These reflectors are attributed to deformation under a transpressional regime that developed along the SFZ, shortly after spreading ceased at the WSR. Magnetic anomalies 5 to 5 E may be confidently identified on the flanks of the WSR. Our spreading model assumes slow rates (ca. 10–20 mm/yr), with slight asymmetries favoring the southeastern flank between 5C and 5, and the northwestern flank between 5 and extinction. The spreading rate asymmetry means that accretion was slower during formation of the steeper, shallower, southeastern flank than of the northwestern flank.  相似文献   

9.
The seafloor spreading of the South China Sea (SCS) was previously believed to take place between ca. 32 and 15 Ma (magnetic anomaly C11 to C5c). New magnetic data acquired in the northernmost SCS however suggests the existence of E–W trending magnetic polarity reversal patterns. Magnetic modeling demonstrates that the oldest SCS oceanic crust could be Late Eocene (as old as 37 Ma, magnetic anomaly C17), with a half-spreading rate of 44 mm/yr. The new identified continent–ocean boundary (COB) in the northern SCS generally follows the base of the continental slope. The COB is also marked by the presence of a relatively low magnetization zone, corresponding to the thinned portion of the continental crust. We suggest that the northern extension of the SCS oceanic crust is terminated by an inactive NW–SE trending trench-trench transform fault, called the Luzon–Ryukyu Transform Plate Boundary (LRTPB). The LRTPB is suggested to be a left-lateral transform fault connecting the former southeast-dipping Manila Trench in the south and the northwest-dipping Ryukyu Trench in the north. The existence of the LRTPB is demonstrated by the different patterns of the magnetic anomalies as well as the different seafloor morphology and basement relief on both sides of the LRTPB. Particularly, the northwestern portion of the LRTPB is marked by a steep northeast-dipping escarpment, along which the Formosa Canyon has developed. The LRTPB probably became inactive at ca. 20 Ma while the former Manila Trench prolonged northeastwards and connected to the former Ryukyu Trench by another transform fault. This reorganization of the plate boundaries might cause the southwestern portion of the former Ryukyu Trench to become extinct and a piece of the Philippine Sea Plate was therefore trapped amongst the LRTPB, the Manila Trench and the continental margin.  相似文献   

10.
Bathymetric data along the Southwest Indian Ridge (SWIR) between 57°E and 70° E have been used to analyze the characteristics of thesegmentation and the morphotectonic variations along this ridge. Higheraxial volcanic ridges on the SWIR than on the central Mid-Atlantic Ridge(MAR) indicate that the lithosphere beneath the SWIR axis that supportsthese volcanic ridges, is thicker than the lithosphere beneath the MAR. Astronger/thicker lithosphere allows less along-axis melt flow andenhances the large crustal thickness variations due to 3D mantle upwellings.Magmatic processes beneath the SWIR are more focused, producing segmentsthat are shorter (30 km mean length) with higher along-axis relief (1200 mmean amplitude) than on the MAR. The dramatic variations in the length andamplitude of the swells (8–50 km and 500–2300 m respectively),the height of axial volcanic ridges (200–1400 m) and the number ofvolcanoes (5–58) between the different types of segments identifiedon the SWIR presumably reflect large differences in the volume, focusing andtemporal continuity of magmatic upwelling beneath the axis. To the east ofMelville fracture zone (60°42 E), the spreading center isdeeper, the bathymetric undulation of the axial-valley floor is less regularand the number of volcanoes is much lower than to the west. The spreadingsegments are also shorter and have higher along-axis amplitudes than to thewest of Melville fracture zone where segments are morphologically similar tothose observed on the central MAR. The lower magmatic activity together withshorter and higher segments suggest colder mantle temperatures withgenerally reduced and more focused magma supply in the deepest part of thesurvey area between 60°42 E and 70° E. The non-transformdiscontinuities show offsets as large as 70 km and orientations up toN36° E as compared to the N0° E spreading direction. We suggest thatin regions of low or sporadic melt generation, the lithosphere neardiscontinuities is laterally heterogeneous and mechanically unable tosustain focused strike-slip deformation.  相似文献   

11.
Chlorofluorocarbons (CFC-11 and CFC-12) in the intermediate water having between 26.4 and 27.2 were determined at 75 stations in the western North Pacific north of 20°N and west of 175.5°E in 1993. The intermediate water of 26.4–26.6 was almost saturated with respect to the present atmospheric CFC-11 in the zone between 35 and 45°N around the subarctic front. Furthermore, the ratios of CFC-11/CFC-12 of the water were also of those formed after 1975. These suggest that the upper intermediate water (26.4–26.6) was recently formed by cooling and sinking of the surface water not by mixing with old waters. The water below the isopycnal surface of 26.8 contained less CFCs and the area containing higher CFCs around the subarctic front was greatly reduced. However, the CFC age of the lower intermediate water (26.8–27.2) in the zone around the subarctic front was not old, suggesting that the water was formed by diapycnal mixing of the water ventilated with the atmosphere with old waters not containing appreciable CFCs, probably the Pacific Deep Water. The southward spreading rate decreased with depth and it was one sixth of its eastward spreading rate of the North Pacific Intermediate Water (NPIW).  相似文献   

12.
A widespread seamount province, the Rano Rahi Field, is located near the superfast spreading Southern East Pacific Rise (SEPR) between 15°–19° S. Particularly abundant volcanic edifices are found on Pacific Plate aged 0 to 6.5 Ma between 17°–19° S, an area greater than 100,000 km2. The numbers of seamounts and their volume are several times greater than those of a comparablysurveyed area near the Northern East Pacific Rise (NEPR), 8°–17° N. Most of the Rano Rahi seamounts belong to chains, which vary in length from 25 km to >240 km and which are very nearly collinear with the Pacific absolute and relative plate motion directions. Bends of 10°–15° occur along a few of the chains, and some adjacent chains converge or diverge slightly. Many seamount chains have fluctuations in volume along their length, and statistical tests suggest that some adjacent chains trade-off in volume. Several seamount chains split into two lines of volcanoes approaching the axis. In general, seamount chains composed of individual circular volcanoes are found near the axis; the chains consist of variably-overlapping edifices in the central part of the survey; to the west, volcanic ridges predominate. Near the SEPR, the volume of nearaxis seamount edifices is generally reduced near areas of deflated cross-sectional area of the axial ridge. Fresh lava flows, as imaged by sidescan sonar and sampled by dredging, exist around some seamounts throughout the entire survey area, in sharp contrast to the absence of fresh flows beyond 30 km from the NEPR. Also, the increases in seamount abundance and volume extend to much greater crustal ages than near the NEPR. Seamount magnetization analysis is also consistent with this wider zone of seamount growth, and it demonstrates the asynchronous formation of most of the seamount chains and volcanic ridges. The variety of observations of the SEPR seamounts suggests that a number of factors and mechanisms might bring about their formation, including the mantle upwelling associated with superfast spreading, off-axis mantle heterogeneities, miniplumes and local upwelling, and the vulnerability of the lithosphere to penetration by volumes of magma. In particular, we note the association of extensive, recent volcanism with intermediate wavelength gravity lineaments lows on crust aged 6 Ma. This suggests that the lineaments and some of the seamounts share a common cause which may be related to ridge-perpendicular asthenospheric convection and/or some manner of extension in the lithosphere.  相似文献   

13.
New geophysical information including multichannel seismic profiling data obtained by the PGO Sevmorgeologia Ministry of Geology of the former USSR, Murmansk during 1984–1988 is discussed and interpreted in this study. The deep structure, sedimentary cover and stratigraphy of the Spitsbergen Continental Margin, considered to be a passive margin, i.e. divergent in the northern part and strike-slip in the western part, is described.Two genetically different types of plateaus on the continental margin, Yermak in the north and Spitsbergen (Vestnesa) in the west, have been identified.The entire extent of the continental slope of the northern part of the Spitsbergen Continental Margin in the Eurasia Basin is underlain by attenuated continental crust, while at the base of the Southwest Continental Margin, the oceanic crust along almost the entire extent is observed. The sedimentary cover, up to 10 km thick within the West Spitsbergen Continental Margin, is likewise observed. Within the North Spitsbergen Margin, however, it does not exceed 3.5 km in thickness.The extension and deposition within the West Spitsbergen Margin began in early Oligocene, while the rifting with accompanying sedimentation within the North Spitsbergen Continental Margin started probably in Early Cretaceous.  相似文献   

14.
Analysis in both the x—t and —p domains of high-quality Expanded Spread Profiles across the Møre Margin show that many arrivals may be enhanced be selective ray tracing and velocity filtering combined with conventional data reduction techniques. In terms of crustal structure the margin can be divided into four main areas: 1) a thicker than normal oceanic crust in the eastern Norway Basin; 2) expanded crust with a Moho depth of 22 km beneath the huge extrusive complex constructed during early Tertiary breakup; 3) the Møre Basin where up to 13–14 km of sediments overlie a strongly extended outer part with a Moho depth at 20 km west of the Ona High; and 4) a region with a 25–27 km Moho depth between the high and the Norwegian coast. The velocity data restricts the continent-ocean boundary to a 15–30 km wide zone beneath the seaward dipping reflector wedges. The crust west of the landward edge of the inner flow is classified as transitional. This region as well as the adjacent oceanic crust is soled by a 7.2–7.4 km s–1 lower crustal body which may extend beneath the entire region that experienced early Tertiary crustal extension. At the landward end of the transect a 8.5 km s–1 layer near the base of the crust is recognized. A possible relationship with large positive gravity anomalies and early Tertiary alkaline intrusions is noted.  相似文献   

15.
The north/south-trending Panama Fracture Zone forms the present eastern boundary of the Cocos Plate, with the interplate motion being right-lateral strike-slip. This fracture zone is composed of at least four linear troughs some hundreds of kilometers in length. Separate active or historic faults undoubtedly coincide with each trough. The greatest sediment fill is found in the easternmost trough. Surface and basement depths of the western trough are generally greater than those of the other three; the western trough contains the least sediment, and is most continually linear. Morphology and sediments suggest that the principal locus of strike-slip movement within the fracture zone probably migrated incrementally westward from one fault-trough to another. From north to south, the fracture zone apparently narrows from the continental intersection to approximately 5°30N, and again widens from about 5°N to at least 3°N. Residual E/W-trending magnetic anomalies are centered between two of the four troughs; sea floor spreading in a north-south direction is interpreted to have occurred between 5°30N and 7°N from 4.5 m.y. ago to 2 m.y. ago, with the symmetric center roughly coinciding with a rift valley at 6°10N, 82°30W.  相似文献   

16.
A study of Sea Beam bathymetry and SeaMARC II side-scan sonar allows us to make quantitative measures of the contribution of faulting to the creation of abyssal hill topography on the East Pacific Rise (EPR) 9°15 N–9°50 N. We conclude that fault locations and throws can be confidently determined with just Sea Beam and SeaMARC II based on a number of in situ observations made from the ALVIN submersible. A compilation of 1026 fault scarp locations and scarp height measurements shows systematic variations both parallel and perpendicular to the ridge axis. Outward-facing fault scarps (facing away from the ridge axis), begin to develop within 2 km of the ridge and reach their final average height of 60 m at 5–7 km. Beyond these distances, outward-dipping faults appear to be locked, although there is some indication of continued lengthening of outward-facing fault scarps out to the edge of the survey area. Inward-facing fault scarps (facing toward the ridge axis), initiate 2 km off axis and increase in height and length out to the edge of our data at 30 km, where the average height of inward fault scarps is 60–70 m and the length is 30 km. Continued slip on inward faults at a greater distance off axis is probable, but based on fault lengths, 80% of the lengthening of inward fault scarps occurs within 30 km of the axis (>95% for outward faults). Along-strike propagation and linkage of these faults are common. Outward-dipping faults accommodate more apparent horizontal strain than inward ones within 10 km of the ridge. The net horizontal extension due to faulting at greater distances is estimated as 4.2–4.3%, and inward and outward faults contribute comparably. Both inward- and outward-facing fault scarps increase in height from north to south in our study area in the direction of decreasing inferred magma supply. Average fault spacing is 2 km for both inward-dipping and outward-dipping faults. The azimuths of fault scarps document the direction of ridge spreading, but they are sensitive to local changes in least compressive stress direction near discontinuities. Both the ridge trend and fault scarp azimuths show a clockwise change in trend of 3–5° from 9°50 N to 9°15 N approaching the 9° N overlapping spreading center.  相似文献   

17.
To decipher the distribution of mass anomalies near the earth's surface and their relation to the major tectonic elements of a spreading plate boundary, we have analyzed shipboard gravity data in the vicinity of the southern Mid-Atlantic Ridge at 31–34.5° S. The area of study covers six ridge segments, two major transforms, the Cox and Meteor, and three small offsets or discordant zones. One of these small offsets is an elongate, deep basin at 33.5° S that strikes at about 45° to the adjoining ridge axes.By subtracting from the free-air anomaly the three-dimensional (3-D) effects of the seafloor topography and Moho relief, assuming constant densities of the crust and mantle and constant crustal thickness, we generate the mantle Bouguer anomaly. The mantle Bouguer anomaly is caused by variations in crustal thickness and the temperature and density structure of the mantle. By subtracting from the mantle Bouguer anomaly the effects of the density variations due to the 3-D thermal structure predicted by a simple model of passive flow in the mantle, we calculate the residual gravity anomalies. We interpret residual gravity anomalies in terms of anomalous crustal thickness variations and/or mantle thermal structures that are not considered in the forward model. As inferred from the residual map, the deep, major fracture zone valleys and the median, rift valleys are not isostatically compensated by thin crust. Thin crust may be associated with the broad, inactive segment of the Meteor fracture zone but is not clearly detected in the narrow, active transform zone. On the other hand, the presence of high residual anomalies along the relict trace of the oblique offset at 33.5° S suggests that thin crust may have been generated at an oblique spreading center which has experienced a restricted magma supply. The two smaller offsets at 31.3° S and 32.5° S also show residual anomalies suggesting thin crust but the anomalies are less pronounced than that at the 33.5° S oblique offset. There is a distinct, circular-shaped mantle Bouguer low centered on the shallowest portion of the ridge segment at about 33° S, which may represent upwelling in the form of a mantle plume beneath this ridge, or the progressive, along-axis crustal thinning caused by a centered, localized magma supply zone. Both mantle Bouguer and residual anomalies show a distinct, local low to the west of the ridge south of the 33.5° S oblique offset and relatively high values at and to the east of this ridge segment. We interpret this pattern as an indication that the upwelling center in the mantle for this ridge is off-axis to the west of the ridge.  相似文献   

18.
A deeply-towed instrument package was used in a detailed survey of the crest of the East Pacific Rise (EPR) near 3°25S, where the Pacific and Nazca plates are separating at 152 mm/yr. A single 90 km-long traverse of the rise crest extends near-bottom observations onto the rise flanks. A ridge at the spreading axis is defined by its steep regional slopes, probably caused by rapid crustal contraction as the spreading magma chamber freezes, rather than by outward-facing fault scarps. It can be divided into a marginal horst-and-graben zone with low (<50 m), symmetric fault blocks, and a 2 km-wide elongate axial shield volcano that is unfaulted except for a narrow crestal rift zone. This has a summit graben (10–35 m deep) probably formed by caldera collapse, and narrow pillow basalt walls built over vent fissures. Small, low (<50 m) volcanic peaks occur on the shield volcano and the horst-and-graben zone, and some may have been built away from the spreading axis. Major plate-building lava flows issue from the crestal rift zone and flow an average of 500 m down the sides of the volcano. The marginal horst-and-graben zone results from tensional faulting of a thin crust of lava, and evolves by progressive shearing on inclined fault planes. Crustal extension continues at least as far as 20 km from the axis, and the large, long fault blocks formed in thicker crust beyond the subaxial magma chamber develop into abyssal hills. Pelagic sedimentation, at a maximum rate of 22 m/106 years, gradually infills open fissures and smooths the small-scale roughness of the fault blocks. Off-axis volcanism has also resulted in smoother crust, and built seamounts.Comparison of the EPR at 3°25S with the Famous Rift and Galapagos Rift reveals a similarity in the processes and small-scale landforms at fast, medium and slow-spreading ridges. There are significant differences in the medium-scale landforms, probably because plate-boundary volcanic and tectonic processes act on crust of very different strength, thickness, and age.Contribution of the Scripps Institution of Oceanography, new series.  相似文献   

19.
Joseph  E. John  Toh  H.  Fujimoto  H.  Iyengar  R.V.  Singh  B.P.  Utada  H.  Segawa  J. 《Marine Geophysical Researches》2000,21(1-2):1-21
Seafloor magnetometer array experiments were conducted in the Bay of Bengal to delineate the subsurface conductivity structure in the close vicinity of the 85°E Ridge and Ninety East Ridge (NER), and also to study the upper mantle conductivity structure of the Bay of Bengal. The seafloor experiments were conducted in three phases. Array 1991 consisted of five seafloor stations across the 85°E Ridge along 14°N latitude with a land reference station at Selam (SLM). Array 1992 also consisted of five seafloor stations across 85°E Ridge along 12°N latitude. Here we used the data from Annamalainagar Magnetic Obervatory (ANN) as land reference data. Array 1995 consisted of four seafloor stations across the NER along 9°N latitude with land reference station at Tirunelveli (TIR). OBM-S4 magnetometers were used for seafloor measurements. The geomagnetic Depth Sounding (GDS) method was used to investigate the subsurface lateral conductivity contrasts. The vertical gradient sounding (VGS) method was used to deliniate the depth-resistivity structure of the oceanic crust and upper mantle. 1-D inversion of the VGS responses were conducted and obtained a 3-layer depth-resistivity model. The top layer has a resistivity of 150–500 m and a thickness of about 15–50 km. The second layer is highly resistive (2000–9000 m) followed by a very low resistive (0.1–50 m) layer at a depth of about 250–450 km. The 3-component magnetic field variations and the observed induction arrows indicated that the electromagnetic induction process in the Bay of Bengal is complex. We made an attempt to solve this problem numerically and followed two approaches, namely (1) thin-sheet modelling and (2) 3-D forward modelling. These model calculations jointly show that the observed induction arrows could be explained in terms of shallow subsurface features such as deep-sea fans of Bay of Bengal, the resistive 85°E Ridge and the sea water column above the seafloor stations. VGS and 3-D forward model responses agree fairly well and provided depth-resistivity profile as a resistive oceanic crust and upper mantle underlained by a very low resistive zone at a depth of about 250–400 km. This depth-range to the low resistive zone coincide with the seismic low velocity zone of the northeastern Indian Ocean derived from the seismic tomography. Thus we propose an electrical conductivity structure for the oceanic crust and upper mantle of the Bay of Bengal.  相似文献   

20.
We report the results of a study of the magnetic properties of basalts recovered from the axis and from 0.7 m.y. old crust at 21° N and 19°30 S on the East Pacific Rise as well as from the 9°03 N overlapping spreading centers. The natural remanent magnetization of the samples from 21° N and 19°30 S decreases from the axis to 0.7 m.y. old crust as a result of low-temperature oxidation. In addition, the magnetic properties of the samples from the 21° N sites indicate that: (1) the magnetic susceptibility and the Koenigsberger ratio decrease with low-temperature alteration, (2) the Curie temperature, the median demagnetizing field and the remanent coercivity increase with maghemitization, (3) the saturation magnetization measured at room temperature does not change significantly with age. The magnetic properties of the basalt samples from the 9°03 N overlapping spreading centers indicate the presence of a high magnetization zone at the tip of the eastern spreading center. This high magnetization zone is the result of the high percentage of unaltered, fine-grained titanomagnetites present in the samples. These measurements are consistent with the results of the three-dimensional inversion of the magnetic field over the 9°03 N overlapping system [Sempere et al., 1984] as well as with detailed tectonic and geochemical investigations of overlapping spreading centers (Sempere and Macdonald, 1986a; Langmuir et al., 1986; Natland et al., 1986). The high magnetization zone appears to be the result of the eruption of highly fractionated basalts enriched in iron associated with the propagation of one of the limbs of the overlapping system into older lithosphere and not just to rapid decay, due to low-temperature oxidation, of the initially high magnetization of pillows extruded in the neovolcanic zone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号