共查询到20条相似文献，搜索用时 78 毫秒
1.
D.L. De Luca 《水文科学杂志》2013,58(8):1536-1558
AbstractThe spatial and temporal variability of the scaling properties and correlation structure of a data set of rainfall time series, aggregated over different temporal resolutions, and observed in 70 raingauges across the Basilicata and Calabria regions of southern Italy, is investigated. Two types of random cascade model, namely canonical and microcanonical models, were used for each raingauge and selected season. For both models, different hypotheses concerning dependency of parameters on time scale and rainfall height can be adopted. In particular, a new approach is proposed which consists of several combinations of models with a different scale dependence of parameters for different temporal resolutions. The goal is to improve the modelling of the main features of rainfall time series, especially for cases where the variability of rainfall changes irregularly with temporal aggregation. The results obtained with the new methodology showed good agreement with the observed data, in particular, for the summer months. In fact, during this season, rainfall heights aggregated at fine temporal resolutions (from 5 to 20 min) are more similar (relative to the winter season) to the values cumulated on 1 or 3 h (due to convective phenomena) and, consequently, the process of rainfall breakdown is nearly stationary for a range of finer temporal resolutions.
Editor D. Koutsoyiannis; Associate editor A. Montanari 相似文献
2.
J. Ndiritu 《水文科学杂志》2013,58(8):1704-1717
AbstractRaingauge measurements are commonly used to estimate daily areal rainfall for catchment modelling. The variation of rainfall between the gauges is usually inadequately captured and areal rainfall estimates are therefore very uncertain. A method of quantifying these uncertainties and incorporating them into ensembles of areal rainfall is demonstrated and tested. The uncertainties are imposed as perturbations based on the differences in areal rainfall that result when half of the raingauges are alternately omitted. Also included is a method of: (a) estimating the proportion rainfall that falls on areas where no gauges are located that are consequently computed as having zero rain, and (b) replacing them with plausible non-zero rainfalls. The model is tested using daily rainfall from two South African catchments and is found to exhibit the expected behaviour. One of the two parameters of the model is obtained from the rainfall data, while the other has direct physical interpretation.Editor D. Koutsoyiannis; Associate editor C. OnofCitation Ndiritu, J., 2013. Using data-derived perturbations to incorporate uncertainty in generating stochastic areal rainfall from point rainfall. Hydrological Sciences Journal, 58 (8), 1704–1717. 相似文献
3.
《水文科学杂志》2013,58(4):567-584
Abstract Reliable, real-time river flow forecasting in Africa on a time scale of days can provide enormous humanitarian and economic benefits. This study investigates the feasibility of using daily rainfall estimates based on cold cloud duration (CCD) derived from Meteosat thermal infrared imagery as input to a simple rainfall—runoff model and also whether such estimates can be improved by the inclusion of information from numerical weather prediction (NWP) analysis models. The Bakoye catchment in Mali, West Africa has been used as a test area. The data available for the study covered the main months of the rainy season for three years. The rainfall estimates were initially validated against gauge data. Improvements in quality were observed when information relating to African Easterly Wave phase and storm type was included in a multiple linear regression (MR) algorithm. The estimates were also tested by using them as input to a rainfall—runoff model. When contemporaneous calibrations from raingauges were available for calibration, both CCD-only and MR rainfall estimates gave more accurate river flow forecasts than when using raingauge data alone. In the absence of contemporaneous calibrations, the performance was reduced but the MR did better than the CCDonly input in all years. The use of satellite-derived vegetation index did not improve the quality of the river flow forecasts. 相似文献
4.
《水文科学杂志》2013,58(2)
Abstract The objective of this study is to find the appropriate number and location of raingauges for a river basin for flow simulation by using statistical analyses and hydrological modelling. First, a statistical method is used to identify the appropriate number of raingauges. Herein the effect of the number of raingauges on the cross-correlation coefficient between areally averaged rainfall and discharge is investigated. Second, a lumped HBV model is used to investigate the effect of the number of raingauges on hydrological modelling performance. The Qingjiang River basin with 26 raingauges in China is used for a case study. The results show that both cross-correlation coefficient and modelling performance increase hyperbolically, and level off after five raingauges (therefore identified to be the appropriate number of rain-gauges) for this basin. The geographical locations of raingauges which give the best and worst hydrological modelling performance are identified, which shows that there is a strong dependence on the local geographical and climatic patterns. 相似文献
5.
Patrick Arnaud Jacques Lavabre Catherine Fouchier Stéphanie Diss Pierre Javelle 《水文科学杂志》2013,58(3):397-410
Abstract Different approaches used in hydrological modelling are compared in terms of the way each one takes the rainfall data into account. We examine the errors associated with accounting for rainfall variability, whether in hydrological modelling (distributed vs lumped models) or in computing catchment rainfall, as well as the impact of each approach on the representativeness of the parameters it uses. The database consists of 1859 rainfall events, distributed on 500 basins, located in the southeast of France with areas ranging from 6.2 to 2851 km2. The study uses as reference the hydrographs computed by a distributed hydrological model from radar rainfall. This allows us to compare and to test the effects of various simplifications to the process when taking rainfall information (complete rain field vs sampled rainfall) and rainfall–runoff modelling (lumped vs distributed) into account. The results appear to show that, in general, the sampling effect can lead to errors in discharge at the outlet that are as great as, or even greater than, those one would get with a fully lumped approach. We found that small catchments are more sensitive to the uncertainties in catchment rainfall input generated by sampling rainfall data as seen through a raingauge network. Conversely, the larger catchments are more sensitive to uncertainties generated when the spatial variability of rainfall events is not taken into account. These uncertainties can be compensated for relatively easily by recalibrating the parameters of the hydrological model, although such recalibrations cause the parameter in question to completely lose physical meaning. Citation Arnaud, P., Lavabre, J., Fouchier, C., Diss, S. & Javelle, P. (2011) Sensitivity of hydrological models to uncertainty of rainfall input. Hydrol. Sci. J. 56(3), 397–410. 相似文献
6.
P. Brigode E. Paquet P. Bernardara J. Gailhard F. Garavaglia P. Ribstein 《水文科学杂志》2015,60(7-8):1424-1437
AbstractThe Kamp River is a particularly interesting case study for testing flood frequency estimation methods, since it experienced a major flood in August 2002. Here, the Kamp catchment is studied in order to quantify the influence of such a remarkable flood event on the calibration of a rainfall–runoff model, in particular when it is used in a stochastic simulation method for flood estimation, by performing numerous rainfall–runoff model calibrations (based on split-sample and bootstrap tests). The results confirmed the usefulness of the multi-period and bootstrap testing schemes for identifying the dependence of model performance and flood estimates on the information contained in the calibration period. The August 2002 event appears to play a dominating role for the Kamp River, since the presence or absence of the event within the calibration sub-periods strongly influences the rainfall–runoff model calibration and the extreme flood estimations that are based on the calibrated model. 相似文献
7.
《水文科学杂志》2013,58(1)
Abstract Abstract The aim of this study was to estimate the uncertainties in the streamflow simulated by a rainfall–runoff model. Two sources of uncertainties in hydrological modelling were considered: the uncertainties in model parameters and those in model structure. The uncertainties were calculated by Bayesian statistics, and the Metropolis-Hastings algorithm was used to simulate the posterior parameter distribution. The parameter uncertainty calculated by the Metropolis-Hastings algorithm was compared to maximum likelihood estimates which assume that both the parameters and model residuals are normally distributed. The study was performed using the model WASMOD on 25 basins in central Sweden. Confidence intervals in the simulated discharge due to the parameter uncertainty and the total uncertainty were calculated. The results indicate that (a) the Metropolis-Hastings algorithm and the maximum likelihood method give almost identical estimates concerning the parameter uncertainty, and (b) the uncertainties in the simulated streamflow due to the parameter uncertainty are less important than uncertainties originating from other sources for this simple model with fewer parameters. 相似文献
8.
9.
In this study, a quantitative assessment of uncertainty was made in connection with the calibration of Australian Water Balance Model (AWBM) for both gauged and ungauged catchment cases. For the gauged catchment, five different rainfall data sets, 23 different calibration data lengths and eight different optimization techniques were adopted. For the ungauged catchment case, the optimum parameter sets obtained from the nearest gauged catchment were transposed to the ungauged catchments, and two regional prediction equations were used to estimate runoff. Uncertainties were ascertained by comparing the observed and modelled runoffs by the AWBM on the basis of different combinations of methods, model parameters and input data. The main finding from this study was that the uncertainties in the AWBM modelling outputs could vary from ?1.3% to 70% owing to different input rainfall data, ?5.7% to 11% owing to different calibration data lengths and ?6% to 0.2% owing to different optimization techniques adopted in the calibration of the AWBM. The performance of the AWBM model was found to be dominated mainly by the selection of appropriate rainfall data followed by the selection of an appropriate calibration data length and optimization algorithm. Use of relatively short data length (e.g. 3 to 6 years) in the calibration was found to generate relatively poor results. Effects of different optimization techniques on the calibration were found to be minimal. The uncertainties reported here in relation to the calibration and runoff estimation by the AWBM model are relevant to the selected study catchments, which are likely to differ for other catchments. The methodology presented in this paper can be applied to other catchments in Australia and other countries using AWBM and similar rainfall–runoff models. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
10.
Abstract The manner in which both the seasonal and regional variations in storm duration, intensity and inter-storm period manifest in the runoff response of agricultural water supply catchments is investigated. High-resolution rainfall data were analysed for a network of 17 raingauges located across the semiarid (200–500 mm year?1) agricultural districts of southwest Western Australia. Seasonal variations in mean storm duration, mean rainfall intensity and mean inter-storm period were modelled using simple periodic functions whose parameters were then also regressed with geographic and climatic indices to create spatial fields for each of these statistics. Based on these mean values, a continuous rainfall time series can be synthesized for any location within the region, with the rainfall depth within each storm being downscaled to 5-min time steps using a bounded random cascade model. Runoff from six different catchment surface treatments (“engineered” catchments) was simulated using a conceptual water-balance model, validated using rainfall—runoff data from an experimental field site. The expected yield of the various catchment types at any other location within the study region is then simulated using the above rainfall—runoff model and synthetic rainfall and potential evaporation time series under a range of climatic settings representative of regional climate variation. The resulting coupled model can be used to estimate the catchment area required to yield an acceptable volume of runoff for any location and dam capacity, at a specified reliability level, thus providing a tool for water resource managers to design engineered catchments for water supply. Although the model presented is specific for Western Australia's southwest region, the methodology itself is applicable to other locations. 相似文献
11.
Abstract The use of a physically-based hydrological model for streamflow forecasting is limited by the complexity in the model structure and the data requirements for model calibration. The calibration of such models is a difficult task, and running a complex model for a single simulation can take up to several days, depending on the simulation period and model complexity. The information contained in a time series is not uniformly distributed. Therefore, if we can find the critical events that are important for identification of model parameters, we can facilitate the calibration process. The aim of this study is to test the applicability of the Identification of Critical Events (ICE) algorithm for physically-based models and to test whether ICE algorithm-based calibration depends on any optimization algorithm. The ICE algorithm, which uses the data depth function, was used herein to identify the critical events from a time series. Low depth in multivariate data is an unusual combination and this concept was used to identify the critical events on which the model was then calibrated. The concept is demonstrated by applying the physically-based hydrological model WaSiM-ETH on the Rems catchment, Germany. The model was calibrated on the whole available data, and on critical events selected by the ICE algorithm. In both calibration cases, three different optimization algorithms, shuffled complex evolution (SCE-UA), parameter estimation (PEST) and robust parameter estimation (ROPE), were used. It was found that, for all the optimization algorithms, calibration using only critical events gave very similar performance to that using the whole time series. Hence, the ICE algorithm-based calibration is suitable for physically-based models; it does not depend much on the kind of optimization algorithm. These findings may be useful for calibrating physically-based models on much fewer data. Editor D. Koutsoyiannis; Associate editor A. Montanari Citation Singh, S.K., Liang, J.Y., and Bárdossy, A., 2012. Improving calibration strategy of physically-based model WaSiM-ETH using critical events. Hydrological Sciences Journal, 57 (8), 1487–1505. 相似文献
12.
Rainfall–runoff models with different conceptual structures for the hydrological processes can be calibrated to effectively reproduce the hydrographs of the total runoff, while resulting in water budget components that are essentially different. This finding poses an open question on the reliability of rainfall–runoff models in reproducing hydrological components other than those used for calibration. In an effort to address this question, we use data from the Glafkos catchment in western Greece to calibrate and compare the ENNS model, a research-oriented lumped model developed for the river Enns in Austria developed for the river Enns in Austria, with the operational MIKE SHE model. Model performance is assessed in the light of the conceptual/structural differences of the modelled hydrological processes, using indices calculated independently for each year, rather than for the whole calibration period, since the former are stricter. We show that even small differences in the representation of hydrological processes may impact considerably on the water budget components that are not measured (i.e. not used for model calibration). From all water budget components, direct runoff exhibits the highest sensitivity to structural differences and related model parameters.
EDITOR M.C. AcremanASSOCIATE EDITOR S. Huang 相似文献
13.
AbstractOne of the main challenges faced by hydrologists and water engineers is the estimation of variables needed for water resources planning and management in ungauged river basins. To this end, techniques for transposing information, such as hydrological regional analyses, are widely employed. A method is presented for regionalizing flow-duration curves (FDCs) in perennial, intermittent and ephemeral rivers, based on the extended Burr XII probability distribution. This distribution shows great flexibility to fit data, with accurate reproduction of flow extremes. The performance analysis showed that, in general, the regional models are able to synthesize FDCs in ungauged basins, with a few possible drawbacks in the application of the method to intermittent and ephemeral rivers. In addition to the regional models, we summarize the experience of using synthetic FDCs for the indirect calibration of the Rio Grande rainfall–runoff model parameters in ungauged basins.Editor D. KoutsoyiannisCitation Costa, V., Fernandes, W., and Naghettini, M., 2013. Regional models of flow-duration curves of perennial and intermittent streams and their use for calibrating the parameters of a rainfall–runoff model. Hydrological Sciences Journal, 59 (2), 262–277. 相似文献
14.
AbstractA new methodology is proposed for the calibration of distributed hydrological models at the basin scale by constraining an internal model variable using satellite data of land surface temperature (LST). The model algorithm solves the system of energy and mass balances in terms of a representative equilibrium temperature that governs the fluxes of energy and mass over the basin domain. This equilibrium surface temperature, which is a critical model state variable, is compared to operational satellite LST, while calibrating soil hydraulic parameters and vegetation variables differently in each pixel, minimizing the errors. This procedure is compared to the traditional calibration using only discharge measurements. The distributed energy water balance model, Flash-flood Event-based Spatially-distributed rainfall–runoff Transformation – Energy Water Balance model (FEST-EWB), is used to test this approach. This methodology is applied to the Upper Yangtze River basin (China) using MODIS LST retrieved from satellite data in the framework of the NRSCC-ESA DRAGON-2 Programme. The calibration procedure based on LST seems to outperform the calibration based on discharge, with lower relative error and higher Nash-Sutcliffe efficiency index on cumulated volume.
Editor D. Koutsoyiannis; Associate editor C. Perrin 相似文献
15.
ABSTRACTWhen discharge measurements are not available, design of water structures relies on using frequency analysis of rainfall data and applying a rainfall–runoff model to estimate a hydrograph. The Soil Conservation Service (SCS) method estimates the design hydrograph first through a rainfall–runoff transformation and next by propagating runoff to the basin outlet via the SCS unit hydrograph (UH) method. The method uses two parameters, the Curve Number (CN) and the time of concentration (Tc). However, in data-scarce areas, the calibration of CN and Tc from nearby gauged watersheds is limited and subject to high uncertainties. Therefore, the inherent uncertainty/variability of the SCS parameters may have considerable ramifications on the safety of design. In this research, a reliability approach is used to evaluate the impact of incorporating the uncertainty of CN and Tc in flood design. The sensitivity of the probabilistic outcome against the uncertainty of input parameters is calculated using the First Order Reliability Method (FORM). The results of FORM are compared with the conventional SCS results, taking solely the uncertainty of the rainfall event. The relative importance of the uncertainty of the SCS parameters is also estimated. It is found that the conventional approach, used by many practitioners, might grossly underestimate the risk of failure of water structures, due to neglecting the probabilistic nature of the SCS parameters and especially the Curve Number. The most predominant factors against which the SCS-CN method is highly uncertain are when the average rainfall value is low (less than 20 mm) or its coefficient of variation is not significant (less than 0.5), i.e. when the resulting rainfall at the design return period is low. A case study is presented for Egypt using rainfall data and CN values driven from satellite information, to determine the regions of acceptance of the SCS-CN method.
EDITOR D. Koutsoyiannis; ASSOCIATE EDITOR A. Efstratiadis 相似文献
16.
D.A. Hughes 《水文科学杂志》2015,60(7-8):1286-1298
AbstractTemporal variability can result from shifts in climate, or from changes in the runoff response due to land- or water-use changes, and represents a potential source of uncertainty in calibrating hydrological models. Parameter values were determined using Monte Carlo parameter sampling methods for a monthly rainfall–runoff model (Pitman model) for different sub-periods on four catchments, with different types and degrees of temporal variability, in Australia and Africa. For some catchments, parameters were not dependent upon the sub-period used and fell within expected ranges given the relatively high degree of model equifinality. In other catchments, dependencies can be identified that are associated with signals contained within the sub-periods. While the Pitman model is relatively robust in the face of temporal variability, it is concluded that better simulations will always be obtained from calibration data that include signals representing the total variability in climate, land-use change and catchment responses. 相似文献
17.
Bruno Collischonn Walter Collischonn Carlos Eduardo Morelli Tucci 《Journal of Hydrology》2008,360(1-4):207-216
Rainfall measurements by conventional raingauges provide relatively accurate estimates at a few points of a region. The actual rainfield can be approximated by interpolating the available raingauge data to the remaining of the area of interest. In places with relatively low gauge density such interpolated rainfields will be very rough estimates of the actual events. This is especially true for tropical regions where most rainfall has a convective origin with high spatial variability at the daily level. Estimates of rainfall by remote sensing can be very useful in regions such as the Amazon basin, where raingauge density is very low and rainfall highly variable. This paper evaluates the rainfall estimates of the Tropical Rainfall Measuring Mission (TRMM) satellite over the Tapajós river basin, a major tributary of the Amazon. Three-hour TRMM rainfall estimates were aggregated to daily values and were compared with catch of ground-level precipitation gauges on a daily basis after interpolating both data to a regular grid. Both daily TRMM and raingauge-interpolated rainfields were then used as input to a large-scale hydrological model for the whole basin; the calculated hydrographs were then compared to observations at several streamgauges along the river Tapajos and its main tributaries. Results of the rainfield comparisons showed that satellite estimates can be a practical tool for identifying damaged or aberrant raingauges at a basin-wide scale. Results of the hydrological modeling showed that TRMM-based calculated hydrographs are comparable with those obtained using raingauge data. 相似文献
18.
The effect of differences between rainfall measurement techniques on groundwater and discharge simulations in a lowland catchment 
下载免费PDF全文
下载免费PDF全文 Several rainfall measurement techniques are available for hydrological applications, each with its own spatial and temporal resolution and errors. When using these rainfall datasets as input for hydrological models, their errors and uncertainties propagate through the hydrological system. The aim of this study is to investigate the effect of differences between rainfall measurement techniques on groundwater and discharge simulations in a lowland catchment, the 6.5‐km2 Hupsel Brook experimental catchment. We used five distinct rainfall data sources: two automatic raingauges (one in the catchment and another one 30 km away), operational (real‐time and unadjusted) and gauge‐adjusted ground‐based C‐band weather radar datasets and finally a novel source of rainfall information for hydrological purposes, namely, microwave link data from a cellular telecommunication network. We used these data as input for the, a recently developed rainfall‐runoff model for lowland catchments, and intercompared the five simulated discharges time series and groundwater time series for a heavy rainfall event and a full year. Three types of rainfall errors were found to play an important role in the hydrological simulations, namely: (1) Biases, found in the unadjusted radar dataset, are amplified when propagated through the hydrological system; (2) Timing errors, found in the nearest automatic raingauge outside the catchment, are attenuated when propagated through the hydrological system; (3) Seasonally varying errors, found in the microwave link data, affect the dynamics of the simulated catchment water balance. We conclude that the hydrological potential of novel rainfall observation techniques should be assessed over a long period, preferably a full year or longer, rather than on an event basis, as is often done. Copyright © 2016 The Authors. Hydrological Processes. Published by John Wiley & Sons Ltd. 相似文献
19.
IAN LITTLEWOOD 《水文科学杂志》2013,58(5):795-811
Abstract A continuous simulation rainfall-streamflow modelling approach that identifies unit hydrographs for total streamflow has been applied to an 11-year record from a national hydrometric monitoring network catchment in the UK. The model is of the parametrically parsimonious conceptual model (PPCM) type that can make efficient use of rainfall, streamflow and air temperature data readily available from established national and regional monitoring networks. A multiple split-sample model calibration and simulation analysis is presented that reveals some guiding principles for calibrating and applying PPCMs generally. The inadequacy of a one-dimensional objective function for calibrating best PPCMs is demonstrated. A two-dimensional objective function approach is superior but is shown to be unreliable in some cases, confirming the need for additional critical inspection of other model performance statistics, model parameters and time series plots as an integral part of the model calibration process. A strong tendency evident from the multiple split-sample analysis is that, for the catchment studied, models that fit relatively well in calibration mode perform relatively poorly in simulation mode. 相似文献
20.
ABSTRACTTraditionally, hydrological models are only calibrated to reproduce streamflow regime without considering other hydrological state variables, such as soil moisture and evapotranspiration. Limited studies have been performed on constraining the model parameters, despite the fact that the presence of a large number of parameters may provide large degree of freedom, resulting in equifinality and poor model performance. In this study, a multi-objective optimization approach is adopted, and both streamflow and soil moisture data are calibrated simultaneously for an experimental study basin in the Saskatchewan Prairies in western Canada. The results of this study show that the multi-objective calibration improves model fidelity compared to the single objective calibration. Moreover, the study demonstrates that single objective calibration performed against only streamflow can fairly mimic the streamflow hydrograph but does not yield realistic estimation of other fluxes such as evapotranspiration and soil moisture (especially in deeper soil layers). 相似文献