共查询到20条相似文献，搜索用时 62 毫秒
1.
深水系泊高强聚乙烯缆绳的蠕变及破断实验研究 总被引：1，自引：0，他引：1
相对于同一破断强度的聚酯(polyester)缆绳,高强聚乙烯(HMPE)缆绳具有更高的刚度、更小的自重和直径、更易运输和安装的优点,因此高强聚乙烯缆绳被引入到系泊系统以替代聚酯缆绳。然而高强聚乙烯缆绳又存在易发生蠕变甚至蠕变破断的不利因素,研究其蠕变和蠕变破断的力学特性就显得尤为迫切。首先设计了合成纤维缆绳实验系统,对HMPE子股缆绳开展了系统的蠕变和蠕变破断实验。基于实验数据,分析了HMPE子缆的蠕变和蠕变破断特性;通过调研HMPE试样的蠕变实验数据,提出了HMPE考虑温度和载荷影响的HMPE纱线蠕变率经验公式,采用该经验公式并结合已有的缆绳比尺换算关系,可以推算出HMPE缆绳的蠕变率;此外,基于所获得的蠕变破断实验数据,提出了HMPE缆绳在定常载荷下的蠕变寿命经验公式。这些成果对HMPE缆绳应用于深水绷紧式系泊系统具有重要意义。 相似文献
2.
探究合成纤维系缆损伤对绷紧式系泊系统响应的影响,具有重要的工程意义。通过高强聚乙烯(HMPE)缆绳损伤动刚度实验,获得其动刚度随损伤的演变规律。在数值计算上,借鉴并合理简化了前人提出的动刚度经验公式,通过处理实验结果确定动刚度经验公式的参数并进行验证。在此基础上,以一座采用高强聚乙烯缆绳为主体系缆的FPSO为例,将所得动刚度经验公式导入系泊分析软件,结合水动力分析,计算得到在相同海洋环境中,系缆发生不同程度损伤时,各系缆张力和平台偏移响应的结果。通过处理、分析所得的计算结果,获得合成纤维缆绳损伤演变对绷紧式系泊系统响应的影响规律,并据此为系缆更换提供了建议。这些成果既有利于把握绷紧式系泊系统的非线性动力响应,也对安全、经济、合理地运用合成纤维系缆具有重要意义。 相似文献
3.
系泊系统设计和分析是深海油气开发平台的关键问题,对于采用合成纤维系缆的绷紧式系泊系统,由于材料属性和安装、使用等因素可能造成缆绳不同程度的损伤,因此有必要研究损伤缆在复杂海况下的非线性动力特性尤其是动刚度演变规律。采用合成纤维系缆循环加载实验系统,对6 mm和8 mm的聚酯(polyester)缆绳试样进行实验研究。引入损伤度指标衡量缆绳的损伤程度,通过剪切股纱减小缆绳的有效承载面积以制造损伤,分别考察了损伤度、平均载荷、应变幅值和循环周次对缆绳动刚度的影响。通过量纲分析得到损伤缆动刚度相似准则,在此基础上分析实验数据获得考虑各主要影响因素的动刚度演变经验公式。这些工作为今后更为复杂的全尺寸损伤缆绳的动刚度研究奠定了基础。 相似文献
4.
由于聚酯缆绳具备优异的力学性能,促使以其为主体系缆的绷紧式系泊系统得以广泛应用和发展。但聚酯系缆具有复杂的黏弹性和黏塑性,且由于在安装和使用过程中可能产生不同程度的损伤,使得聚酯系缆的动刚度特性发生演变,从而对系泊系统的动力响应产生直接影响。以一系泊于1 020 m水深的Spar平台为例,运用ABAQUS软件建立了由聚酯缆绳组成的系泊系统有限元模型,并利用ABAQUS子程序将损伤缆绳动刚度经验公式进行导入计算,以更好地反映系缆真实的动刚度变化。基于该有限元模型,计算了在相同水流、波浪工况下,不同损伤度、不同损伤系缆的系缆张力历程和平台的横荡、纵荡位移响应,分析了不同损伤度、不同损伤系缆对系缆张力及平台位移的影响。这些成果对把握绷紧式系泊系统在聚酯系缆有损伤情况下的非线性动力响应及其安全应用具有重要的参考价值。 相似文献
5.
深水绷紧式系泊系统以合成纤维材料系缆作为主体系缆,由于系缆复杂的力学特性以及绷紧式系泊方式的特点,在设计、分析和工程应用中会带来新的有待深入认识的问题。以一系泊浮体的动力响应分析为例,考察了循环载荷作用下纤维系缆的动刚度特性,比较了悬链式系泊与绷紧式系泊动力响应的特点。分析表明,绷紧式系泊具有优良的系泊性能,但同时会发生复杂的张力响应。这些认识对于绷紧式系泊系统的研发和工程应用具有重要的参考价值。 相似文献
6.
在循环载荷作用下,合成纤维系缆的应力应变关系表现出明显的非线性特性,直接影响系泊缆绳的动力响应。如何针对其在循环载荷作用下的应力应变关系进行准确的定量描述是有关绷紧式系泊系统设计的关键问题。国内外研究者之前的研究不能反映缆绳的载荷历史、蠕变特性以及刚度变化过程,因此提出一个粘弹性粘塑性模型来描述合成纤维系缆的应力应变关系。本模型能够反映合成纤维缆绳的时间变化特性以及在整个加载—卸载过程中的刚度变化。此外,提出了明确的参数确定方法及步骤,基于简单的蠕变实验可以确定模型的各个参数。将两种载荷条件下聚酯缆绳的实验结果与模型结果进行对比,二者吻合较好,证明了模型的有效性和可靠性。本研究对于绷紧式系泊系统的研发和工程应用具有重要意义。 相似文献
7.
新型深海系泊系统及数值分析技术 总被引：7，自引：1，他引：7
随着海洋油气资源开发逐渐向深海转移,传统的悬链式系泊系统在技术和经济上遇到难以逾越的障碍。作为一种新型的适用于深水和超深水环境的系泊系统,绷紧索系泊系统面临广阔的应用前景。文章对这种新型系泊系统的发展情况进行了介绍,基于有限元数值分析技术,对系泊系统的两个关键特性,即系缆的绷紧-松弛特性以及纤维系缆的动刚度特性进行了分析和处理,通过算例考察了深海平台运动引起的系缆力响应。 相似文献
8.
新型深水系缆非线性动力特性研究进展 总被引：1，自引：0，他引：1
随着海洋油气资源开采逐渐向深海发展,新型绷紧式系泊系统正替代传统悬链式系泊系统广泛应用于深水平台的系泊中.作为一种采用合成纤维材料系缆的新型系泊系统,系缆复杂的力学特性是其工程应用需要首先认识并解决的关键技术问题.介绍了在复杂海洋环境条件下合成纤维系缆的非线性动力特性,包括动刚度、绷紧-松弛、蠕变、应力松弛以及疲劳破坏等特性,总结和评述了针对这些特性开展的国内外相关研究,也对今后需要继续深化的研究进行了展望,以期为国内在此方向开展的数值模拟和实验研究提供重要参考. 相似文献
9.
10.
拖曳锚由于其承载性能和深水中便于安装被广泛应用于海洋工程系泊系统中,如:适用于悬链式系泊系统的传统拖曳锚和适用于绷紧式系泊系统的法向承力锚。拖曳锚安装过程中涉及诸多运动特性:锚板运动方向、系缆点处拖曳力和拖曳角及运动轨迹。基于大变形有限元分析技术耦合的欧拉-拉格朗日法,并引入缆绳方程,建立起锚-缆绳-海床土耦合作用的有限元分析模型;模拟了拖曳锚在均质和线性强度黏土中的嵌入安装过程,研究了锚板运动方向、系缆点处拖曳力和拖曳角及运动轨迹等运动特性;通过与已有的有限元分析方法及理论方法进行对比,验证了该分析模型的有效性;与已有的有限元分析方法相比,提出的分析模型有效地提高了计算效率。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.