共查询到20条相似文献，搜索用时 78 毫秒
1.
目前J-lay铺管法作为深水和超深水铺管的最适用方法广泛应用于深海油气开发。考虑J-lay铺管时管道几何非线性特征以及触地区边界效应,将J-lay铺管模型划分三构件进行力学分析:悬浮段、边界层段以及触地段。建立Orca Flex模型和引入Wang改进二构件模型,通过对比上述三种方法计算J-lay相应构型、轴力、弯矩和剪力分布,验证该三构件模型的可行性和考虑边界效应的必要性。基于Lamé公式计算管道横截面处轴向、径向以及环向应力,对比分析J-lay铺设管道应力分布特征。结果表明:该改进三构件模型能真实有效地模拟J-lay铺管过程中管道受力情况,特别是触地点附近弯矩和剪力变化情况,能为管道疲劳损伤分析提供理论基础。 相似文献
2.
采用卷管法进行海底管道铺设过程中,管道首先通过牵引作用上卷于卷筒进行储存。管道与卷筒发生非线性接触,可能会产生复杂的塑性变形和局部屈曲。通过全尺寸柔性管力学性能试验获得柔性管轴力—应变以及弯曲—曲率等非线性力学性能关系,将试验所得的非线性材料性能参数导入建立的两种柔性管上卷ABAQUS有限元模型（梁—实体单元模型与壳和桁架—实体单元模型）,实现柔性管较大轴向抗拉刚度和较小抗弯刚度的同步模拟以及管道与卷筒的非线性接触响应特征。通过对比分析两种有限元模型数值模拟得到的管道弯矩、弯曲曲率、管道轴力、管道与卷筒的接触压强等数据,发现在管道上卷过程中管道沿副法线方向的SM3弯矩占据其弯曲变形主导地位;管道与卷筒之间的摩擦效应对于管道轴力的影响较为显著;管道与卷筒的最大接触压强主要发生在卷管过渡段区域。 相似文献
3.
海底管道在深海石油开发工程中有着广泛的应用,管道在工作时受到高温高压会触发水平向整体屈曲变形,蛇形铺管法是控制管道水平向整体屈曲变形的有效手段。采用数值模拟方法,对蛇形铺设管道的关键参数进行研究,分析关键参数对临界屈曲荷载和屈曲后截面应力应变状态的影响。对每一组蛇形铺设管道都设置了直线型铺设管道的对照组,对照组采用引入初始挠曲的方法激发水平向整体屈曲,初始挠曲程度与蛇形铺设管道相同。通过与直线型铺设管道的对比,显示了蛇形铺设管道在激发和控制屈曲方面的优势,并对不同土体阻力情况下蛇形铺设管道的实际效果进行了评估。结果表明,蛇形铺设管道的临界屈曲力和屈曲后的弯矩皆远小于直线型管道。蛇形铺设管道的临界屈曲力随圆心角θ增大而减小,随曲率半径R的增大而增大。增大跨度L、曲率半径R和圆心角θ都能有效减小蛇形铺设管道的截面弯矩。水平向土体阻力对蛇形铺设管道影响较大,水平向土体阻力较小时,蛇形铺设管道控制屈曲的效果更为明显。 相似文献
4.
5.
针对夹心立管极限承载能力问题,通过ABAQUS软件建立了立管的非线性有限元模型,对纯外压、纯弯矩、以及外压和弯矩联合作用下的立管极限强度进行研究。研究夹心材料、初始椭圆度以及偏心焊接等因素对立管的极限承载能力影响。经有限元计算可知,胶合材料夹心立管与聚丙烯材料夹心立管在极限强度上有明显的差异;对于胶合材料夹心立管,随着初始椭圆度增加,立管的极限外压和极限弯矩均减小;对于偏心焊接的单壁立管而言,随着偏心焊接量的增大,立管的极限弯矩减小。 相似文献
6.
7.
深水海底管道S型铺设参数敏感性分析 总被引：5，自引：0，他引：5
以深水海底管道S型铺管法为研究对象,运用悬链线理论建立管道的静平衡微分方程,通过理论分析给出了迭代求解管道整体形态的数值计算方法,并开发相应的计算分析程序,分析了不同参数对张紧器张力和管道极限铺设水深的影响.结果表明,随着管道铺设水深、管径和壁厚、混凝土配重层厚度的增加,所需张紧器张力明显增大;当托管架底部倾角较大时,控制应变越大管道所需张力越小;当托管架底部倾角较小时,管道初始倾角越大、托管架半径越小管道所需张力越小.此外,管道的浮重度、托管架长度和半径、张紧器张拉能力、管道初始倾角对极限铺设水深有着重要的影响. 相似文献
8.
考虑内流的作用,研究缓波形立管在海洋环境荷载作用下的非线性静动力力学性能。采用细长柔性杆理论,建立缓波形立管运动方程,利用有限元法进行离散,运用Newton-Raphson法和Newmark-β法分别对立管进行静动力分析,编制缓波形立管计算分析程序LWRNM,研究缓波形立管在海流、内流、浮体漂移与运动作用下的结构响应。结果表明:随着海流从x负向变成x正向和流速的增大,缓波形立管线形变缓,有效张力增大,弯曲曲率的极值减小;随着内流流速的增加,缓波形立管的固有频率下降;随着顶部浮体从近端向远端漂移,缓波形立管的有效张力增大,弯曲曲率的极值减小;纵荡和垂荡作用下,缓波形立管的顶部有效张力变化周期与浮体激励周期相同,横荡作用下,顶部有效张力变化周期为浮体激励周期的二分之一,垂荡作用下,缓波形立管顶部有效张力变化幅值最大,纵荡作用下次之,横荡作用下最小。 相似文献
9.
10.
海洋输流立管耦合动力分析 总被引：1，自引：1，他引：0
综合考虑黏性内流以及立管轴向和流向的耦合效应等多种因素对立管动力响应的影响,基于Hamilton原理推导得出海洋立管耦合振动方程,采用Galerkin法进行数值求解。首先分析波流载荷与平台运动联合激励和仅在平台运动作用下立管动力响应的差异,然后讨论黏性内流和顶部张力对立管动力特性和响应峰值的影响。计算结果表明:波流与平台运动耦合作用和仅在平台运动作用下的立管各阶振动模态和振动峰值存在明显差异,波浪和海流对立管的直接作用不可忽略;内流运动黏性会改变立管振型峰值,立管流向一阶固有频率随内流流速增大而减小,流向和垂向振动峰值分别随之增加和减小,但这种影响很有限,且可以通过增大立管顶部预张力来抵消。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
16.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.