共查询到20条相似文献，搜索用时 359 毫秒
1.
Vibroseis deconvolution: a comparison of cross-correlation and frequency-domain sweep deconvolution 总被引：3，自引：0，他引：3
Ideally, traditional vibroseis processing produces a band-limited zero-phase Klauder wavelet through cross-correlation of the sweep with the recorded signal. An alternative wavelet processing method involves deconvolving the sweep from the recorded vibroseis trace. This deconvolution can be achieved through frequency-domain division. We compare and contrast the advantages and disadvantages of sweep deconvolution versus cross-correlation on synthetic and real data. 相似文献
2.
A. N. BOWEN 《Geophysical Prospecting》1986,34(3):366-382
Wiener ‘spiking’ deconvolution of seismic traces in the absence of a known source wavelet relies upon the use of digital filters, which are optimum in a least-squares error sense only if the wavelet to be deconvolved is minimum phase. In the marine environment in particular this condition is frequently violated, since bubble pulse oscillations result in source signatures which deviate significantly from minimum phase. The degree to which the deconvolution is impaired by such violation is generally difficult to assess, since without a measured source signature there is no optimally deconvolved trace with which the spiked trace may be compared. A recently developed near-bottom seismic profiler used in conjunction with a surface air gun source produces traces which contain the far-field source signature as the first arrival. Knowledge of this characteristic wavelet permits the design of two-sided Wiener spiking and shaping filters which can be used to accurately deconvolve the remainder of the trace. In this paper the performance of such optimum-lag filters is compared with that of the zero-lag (one-sided) operators which can be evaluated from the reflected arrival sequence alone by assuming a minimum phase source wavelet. Results indicate that the use of zero-lag operators on traces containing non-minimum phase wavelets introduces significant quantities of noise energy into the seismic record. Signal to noise ratios may however be preserved or even increased during deconvolution by the use of optimum-lag spiking or shaping filters. A debubbling technique involving matched filtering of the trace with the source wavelet followed by optimum-lag Wiener deconvolution did not give a higher quality result than can be obtained simply by the application of a suitably chosen Wiener shaping filter. However, cross correlation of an optimum-lag spike filtered trace with the known ‘actual output’ of the filter when presented with the source signature is found to enhance signal-to-noise ratio whilst maintaining improved resolution. 相似文献
3.
Vibroseis is a source used commonly for inland seismic exploration. This non-destructive source is often used in urban areas with strong environmental noise. The main goal of seismic data processing is to increase the signal/noise ratio where a determinant step is deconvolution. Vibroseis seismic data do not meet the basic minimum-phase assumption for the application of spiking and predictive deconvolution, therefore various techniques, such as phase shift, are applied to the data, to be able to successfully perform deconvolution of vibroseis data.This work analyzes the application of deconvolution techniques before and after cross-correlation on a real data set acquired for high resolution prospection of deep aquifers. In particular, we compare pre-correlation spiking and predictive deconvolution with Wiener filtering and with post-correlation time variant spectral whitening deconvolution. The main result is that at small offsets, post cross-correlation spectral whitening deconvolution and pre-correlation spiking deconvolution yield comparable results, while for large offsets the best result is obtained by applying a pre-cross-correlation predictive deconvolution. 相似文献
4.
Deconvolution is an essential step for high-resolution imaging in seismic data processing. The frequency and phase of the seismic wavelet change through time during wave propagation as a consequence of seismic absorption. Therefore, wavelet estimation is the most vital step of deconvolution, which plays the main role in seismic processing and inversion. Gabor deconvolution is an effective method to eliminate attenuation effects. Since Gabor transform does not prepare the information about the phase, minimum-phase assumption is usually supposed to estimate the phase of the wavelet. This manner does not return the optimum response where the source wavelet would be dominantly a mixed phase. We used the kurtosis maximization algorithm to estimate the phase of the wavelet. First, we removed the attenuation effect in the Gabor domain and computed the amplitude spectrum of the source wavelet; then, we rotated the seismic trace with a constant phase to reach the maximum kurtosis. This procedure was repeated in moving windows to obtain the time-varying phase changes. After that, the propagating wavelet was generated to solve the inversion problem of the convolutional model. We showed that the assumption of minimum phase does not reflect a suitable response in the case of mixed-phase wavelets. Application of this algorithm on synthetic and real data shows that subtle reflectivity information could be recovered and vertical seismic resolution is significantly improved. 相似文献
5.
6.
In certain areas continuous Vibroseis profiling is not possible due to varying terrain conditions. Impulsive sources can be used to maintain continuous coverage. While this technique keeps the coverage at the desired level, for the processing of the actual data there is the problem of using different sources resulting in different source wavelets. In addition, the effect of the free surface is different for these two energy sources. The approach to these problems consists of a minimum-phase transformation of the two-sided Vibroseis data by removal of the anticipation component of the autocorrelation of the filtered sweep and a minimum-phase transformation of the impulsive source data by replacement of the recording filter operator with its minimum-phase correspondent. Therefore, after this transformation, both datasets show causal wavelets and a conventional deconvolution (spike or predictive) may be used. After stacking, a zero-phase transformation can be performed resulting in traces well suited for computing pseudo-acoustic impedance logs or for application of complex seismic trace analysis. The solution is also applicable to pure Vibroseis data, thereby eliminating the need for a special Vibroseis deconvolution. The processing steps described above are demonstrated on synthetic and actual data. The transformation operators used are two-sided recursive (TSR) shaping filters. After application of the above adjustment procedure, remaining signal distortions can be removed by modifying only the phase spectrum or both the amplitude and phase spectra. It can be shown that an arbitrary distortion defined in the frequency domain, i.e., a distortion of the amplitude and phase spectrum, is noticeable in the time section as a two-sided signal. 相似文献
7.
A new approach to deconvolution has been developed to improve the attenuation of multiple energy. This approach to deconvolution is unique in that it not only eliminates the usual assumptions of a minimum phase lag wavelet and a random distribution of impulses, but also overcomes the noise limitation of the homomorphic deconvolution and its inherent instability to phase computation. We attempt to analyse the continuous alteration of the acoustic waveform during the propagation through a linear system. Based on the results of this analysis, the surface-related measurements are described as a convolution of the impulse response of the system with the non-stationary forward wavelet which includes all multiple terms generated within the system. The amplitude spectrum of the forward wavelet is recovered from the amplitude spectrum of the recorded signal, using the difference between the rate of decay of the source wavelet and the duration of the measurement. The phase spectrum of the forward wavelet is estimated using the Hilbert transform and the fact that the mixed phase lag wavelet can be presented as a convolution of the minimum and maximum phase lag wavelets. The multiples are discriminated from primaries by comparison of the phase spectrum of the seismic signal and the inverse of the forward wavelet. Therefore, the technique is called phase inversion deconvolution (PID). This approach requires no velocity information in order to recognize and attenuate multiple energy. Therefore, primary energy is recovered in the near-offset region where the velocity differential between primary and multiple energies is very small. 相似文献
8.
针对玛湖斜坡区三块三维地震资料和赛汉塔拉凹陷二块三维地震资料连片处理中的特点，结合地质任务和处理目标要求，提出了地震数据连片处理中的地震子波处理的方法.该方法主要体现了两次反褶积，一次是采用地表一致性反褶积，将不同震源的频带拓宽到一个标准上；再一次采用相位校正反褶积，将不同震源的数据校正到相同相位上.为了保证提取的相位校正反褶积算子稳定，采用叠后地震道提取（主要考虑到叠后地震道信噪比高，算子稳定性强），然后将该算子应用到叠前地震道，进行相位校正. 相似文献
9.
C. Schmelzbach F. ScherbaumJ. Tronicke P. Dietrich 《Journal of Applied Geophysics》2011,75(4):615-630
Enhancing the resolution and accuracy of surface ground-penetrating radar (GPR) reflection data by inverse filtering to recover a zero-phased band-limited reflectivity image requires a deconvolution technique that takes the mixed-phase character of the embedded wavelet into account. In contrast, standard stochastic deconvolution techniques assume that the wavelet is minimum phase and, hence, often meet with limited success when applied to GPR data. We present a new general-purpose blind deconvolution algorithm for mixed-phase wavelet estimation and deconvolution that (1) uses the parametrization of a mixed-phase wavelet as the convolution of the wavelet's minimum-phase equivalent with a dispersive all-pass filter, (2) includes prior information about the wavelet to be estimated in a Bayesian framework, and (3) relies on the assumption of a sparse reflectivity. Solving the normal equations using the data autocorrelation function provides an inverse filter that optimally removes the minimum-phase equivalent of the wavelet from the data, which leaves traces with a balanced amplitude spectrum but distorted phase. To compensate for the remaining phase errors, we invert in the frequency domain for an all-pass filter thereby taking advantage of the fact that the action of the all-pass filter is exclusively contained in its phase spectrum. A key element of our algorithm and a novelty in blind deconvolution is the inclusion of prior information that allows resolving ambiguities in polarity and timing that cannot be resolved using the sparseness measure alone. We employ a global inversion approach for non-linear optimization to find the all-pass filter phase values for each signal frequency. We tested the robustness and reliability of our algorithm on synthetic data with different wavelets, 1-D reflectivity models of different complexity, varying levels of added noise, and different types of prior information. When applied to realistic synthetic 2-D data and 2-D field data, we obtain images with increased temporal resolution compared to the results of standard processing. 相似文献
10.
Vibroseis deconvolution can be performed either before or after correlation. As regards the deconvolution before correlation, the Vibroseis deconvolution operator can be described as convolution of a spike deconvolution operator with a minimum-phase filter operator with bandpass properties. As regards the deconvolution after correlation, the deconvolution operator can be shown to be the convolution of three operators: spike deconvolution operator and two-fold convolution with a minimum phase operator. Time-varying Vibroseis deconvolution can particularly well be described and performed after correlation. 相似文献
11.
基于对地震反褶积本质上是一个盲过程的认识，引入高阶统计学盲源分离技术——独立分量分析（ICA）实现地震盲反褶积.在无噪声假设条件下，利用地震记录时间延迟矩阵和地震子波带状褶积矩阵，将地震褶积模型转化为一般线性混合ICA模型，采用FastICA算法，将带状性质作为先验信息，实现所谓带状ICA算法（B\|ICA），得到个数与子波算子长度相等的多个估计反射系数序列和估计子波序列，最后利用褶积模型提供的附加信息从中优选出最佳的反射系数序列及相应的地震子波.模型数据和实际二维地震道数值算例表明：对于统计性反褶积，在不对反射系数作高斯白噪假设，不对子波作最小相位假设的所谓“全盲”条件下，基于ICA方法（反射系数非高斯分布，地震子波非最小相位）可以较好解决地震盲反褶积问题，是基于二阶统计特性的地震信号统计性反褶积方法的提升，具有可行性和应用前景. 相似文献
12.
震源到接收台站之间的地层响应函数能够反映地下介质信息。对地震波传播过程中的卷积模型进行推导:记录信号是众多震源子波经过时移加权叠加的结果;通过反卷积方法可去除震源子波信息,提取震源到接收台站之间的地层响应函数;地层响应函数中第一个突跳值对应的时间即为P波走时。在河北赤城—张北地区进行人工震源实验,通过反卷积计算得到该地区地层响应函数剖面图,得出P波波速约6 km/s。利用人工震源系统还可以对地下介质波速变化进行长期动态监测,对地震预测具有一定意义。 相似文献
13.
Bussgang算法是针对褶积盲源分离问题提出的,本文将其用于地震盲反褶积处理.由于广义高斯概率密度函数具有逼近任意概率密度函数的能力,从反射系数序列的统计特征出发,引入广义高斯分布来体现反射系数序列超高斯分布特征.依据反射系数序列的统计特征和Bussgang算法原理,建立以Kullback-Leibler距离为非高斯性度量的目标函数,并导出算法中涉及到的无记忆非线性函数,最终实现了地震盲反褶积.模型试算和实际资料处理结果表明,该方法能较好地适应非最小相位系统,能够同时实现地震子波和反射系数估计,有效地提高地震资料分辨率. 相似文献
14.
A. P. SHATILO 《Geophysical Prospecting》1992,40(2):211-225
Six known methods of seismic phase unwrapping (or phase restoration) are compared. All the methods tested unwrap the phase satisfactorily if the initial function is a simple theoretical wavelet. None of the methods restore the phase of a synthetic trace exactly. An initial validity test of the phase-unwrapping method is that the sum of the restored wavelet phase spectrum and the restored pulse-trace phase spectrum (assuming the convolutional model for the seismic trace) must be equal to the restored phase spectrum of the synthetic trace. Results show that none of the tested methods satisfy this test. Quantitative estimation of the phase-unwrapping accuracy by correlation analysis of the phase deconvolution results separated these methods, according to their efficiency, into three groups. The first group consists of methods using a priori wavelet information. These methods make the wavelet phase estimation more effective than the minimum-phase approach, if the wavelet is non-minimum-phase. The second group consists of methods using the phase increment Δø(Δω) between two adjacent frequencies. These methods help to decrease the time shift of the initial synthetic trace relative to the model of the medium. At the same time they degrade the trace correlation with the medium model. The third group consists of methods using an integration of the phase derivative. These methods do not lead to any improvement of the initial seismic trace. The main problem in the phase unwrapping of a seismic trace is the random character of the pulse trace. For this reason methods based on an analysis of the value of Δø(Δω) only, or using an adaptive approach (i.e. as Δω decreases) are not effective. In addition, methods based on integration of the phase derivative are unreliable, due to errors in numerical integration and differentiation. 相似文献
15.
本文给出了常见地震子波的一个模拟公式，可以很好地模拟零相位及混合相位子波，在一定意义上也可以近似模拟最大相位及最小相位子波．模拟出的子波加上适当的修正项后满足允许条件，可用作小波函数．与Ｍｏｒｌｅｔ小波类似，在实际应用中这些修正项在一定条件下可以略去，文中对Ｍｏｒｌｅｔ小波作了改造，使其能更好地适应于地震资料处理．研究了反射波能量及噪声等干扰波在时间－尺度域的分布特征与所选基本小波的关系．提出用地震子波（或与地震子波相近的函数）作为基本小波，对地震资料进行去噪及分频解释的方法．最后用实例证明方法的有效性． 相似文献
16.
非稳态地震稀疏约束反褶积研究（英文） 总被引：1，自引：1，他引：0
传统Robinson褶积模型主要受缚于三种不合理的假设,即白噪反射系数、最小相位地震子波与稳态假设,而现代反射系数反演方法（如稀疏约束反褶积等）均在前两个假设上寻求突破的同时却忽视了一个重要事实：实际地震信号具有典型的非稳态特征,这直接冲击着反射系数反演中地震子波不随时间变化的这一基础性假设。本文首先通过实际反射系数测试证实,非稳态效应造成重要信息无法得到有效展现,且对深层影响尤为严重。为校正非稳态影响,本文从描述非稳态方面具有普适性的非稳态褶积模型出发,借助对数域的衰减曲线指导检测非稳态影响并以此实现对非稳态均衡与校正。与常规不同,本文利用对数域Gabor反褶积仅移除非稳态影响,而将分离震源子波和反射系数的任务交给具有更符合实际条件的稀疏约束反褶积处理,因此结合两种反褶积技术即可有效解决非稳态特征影响,又能避免反射系数和地震子波理想化假设的不利影响。海上地震资料的应用实际表明,校正非稳态影响有助于恢复更丰富的反射系数信息,使得与地质沉积和构造相关的细节特征得到更加清晰的展现。 相似文献
17.
S.A. ELLENDER 《Geophysical Prospecting》1986,34(8):1200-1212
Analysis of the phase spectra from the signatures, impulse responses and other wavelets observed in seismic data leads to the construction of equivalent minimum-phase functions. The accuracy of such computations using digitally sampled data is questioned with special reference to Texas Instruments DFS IV and DFS V recording filters. Results vary with the lengths and sample rates of the time functions, and further errors may be introduced when implementing the Hilbert transform. Such problems are related to poor resolution in the low amplitude areas of the spectrum. Techniques for correction are described. With appropriate shaping a reasonably accurate phase spectrum may be computed for the minimum-phase function. The generation of minimum-phase wavelets within the processing sequence is briefly discussed. 相似文献
18.
Derman Dondurur 《Pure and Applied Geophysics》2010,167(10):1233-1245
Wiener deconvolution is generally used to improve resolution of the seismic sections, although it has several important assumptions. I propose a new method named Gold deconvolution to obtain Earth’s sparse-spike reflectivity series. The method uses a recursive approach and requires the source waveform to be known, which is termed as Deterministic Gold deconvolution. In the case of the unknown wavelet, it is estimated from seismic data and the process is then termed as Statistical Gold deconvolution. In addition to the minimum phase, Gold deconvolution method also works for zero and mixed phase wavelets even on the noisy seismic data. The proposed method makes no assumption on the phase of the input wavelet, however, it needs the following assumptions to produce satisfactory results: (1) source waveform is known, if not, it should be estimated from seismic data, (2) source wavelet is stationary at least within a specified time gate, (3) input seismic data is zero offset and does not contain multiples, and (4) Earth consists of sparse spike reflectivity series. When applied in small time and space windows, the Gold deconvolution algorithm overcomes nonstationarity of the input wavelet. The algorithm uses several thousands of iterations, and generally a higher number of iterations produces better results. Since the wavelet is extracted from the seismogram itself for the Statistical Gold deconvolution case, the Gold deconvolution algorithm should be applied via constant-length windows both in time and space directions to overcome the nonstationarity of the wavelet in the input seismograms. The method can be extended into a two-dimensional case to obtain time-and-space dependent reflectivity, although I use one-dimensional Gold deconvolution in a trace-by-trace basis. The method is effective in areas where small-scale bright spots exist and it can also be used to locate thin reservoirs. Since the method produces better results for the Deterministic Gold deconvolution case, it can be used for the deterministic deconvolution of the data sets with known source waveforms such as land Vibroseis records and marine CHIRP systems. 相似文献
19.
Statistical deconvolution, as it is usually applied on a routine basis, designs an operator from the trace autocorrelation to compress the wavelet which is convolved with the reflectivity sequence. Under the assumption of a white reflectivity sequence (and a minimum-delay wavelet) this simple approach is valid. However, if the reflectivity is distinctly non-white, then the deconvolution will confuse the contributions to the trace spectral shape of the wavelet and reflectivity. Given logs from a nearby well, a simple two-parameter model may be used to describe the power spectral shape of the reflection coefficients derived from the broadband synthetic. This modelling is attractive in that structure in the smoothed spectrum which is consistent with random effects is not built into the model. The two parameters are used to compute simple inverse- and forward-correcting filters, which can be applied before and after the design and implementation of the standard predictive deconvolution operators. For whitening deconvolution, application of the inverse filter prior to deconvolution is unnecessary, provided the minimum-delay version of the forward filter is used. Application of the technique to seismic data shows the correction procedure to be fast and cheap and case histories display subtle, but important, differences between the conventionally deconvolved sections and those produced by incorporating the correction procedure into the processing sequence. It is concluded that, even with a moderate amount of non-whiteness, the corrected section can show appreciably better resolution than the conventionally processed section. 相似文献
20.
The effects of source and receiver motion on seismic data are considered using extensions of the standard convolutional model. In particular, receiver motion introduces a time-variant spatial shift into data, while source motion converts the effect of the source signature from a single-channel convolution in time to a multichannel convolution in time and space. These results are consistent with classical Doppler theory and suggest that Doppler shifting can introduce distortions into seismic data even at relatively slow acquisition speeds. It is shown that, while both source and receiver motion are known to be important for marine vibroseis acquisition, receiver motion alone can produce significant artifacts in marine 3D data. Fortunately, the convolutional nature of the distortions renders them amenable to correction using simple deconvolution techniques. Specifically, the effects of receiver motion can be neutralized by applying an appropriate reverse time-variant spatial shift, while those due to source motion can be addressed by introducing time-variant spatial shifts both before and after standard, deterministic, signature deconvolution or correlation. 相似文献