共查询到20条相似文献，搜索用时 46 毫秒
1.
Three-dimensional slope stability analysis of South Peak, Crowsnest Pass, Alberta, Canada 总被引：2，自引：2，他引：0
Marc-Andr�� Brideau Andrea Pedrazzini Doug Stead Corey Froese Michel Jaboyedoff David van Zeyl 《Landslides》2011,8(2):139-158
South Peak is a 7-Mm3 potentially unstable rock mass located adjacent to the 1903 Frank Slide on Turtle Mountain, Alberta. This paper presents
three-dimensional numerical rock slope stability models and compares them with a previous conceptual slope instability model
based on discontinuity surfaces identified using an airborne LiDAR digital elevation model (DEM). Rock mass conditions at
South Peak are described using the Geological Strength Index and point load tests, whilst the mean discontinuity set orientations
and characteristics are based on approximately 500 field measurements. A kinematic analysis was first conducted to evaluate
probable simple discontinuity-controlled failure modes. The potential for wedge failure was further assessed by considering
the orientation of wedge intersections over the airborne LiDAR DEM and through a limit equilibrium combination analysis. Block
theory was used to evaluate the finiteness and removability of blocks in the rock mass. Finally, the complex interaction between
discontinuity sets and the topography within South Peak was investigated through three-dimensional distinct element models
using the code 3DEC. The influence of individual discontinuity sets, scale effects, friction angle and the persistence along
the discontinuity surfaces on the slope stability conditions were all investigated using this code. 相似文献
2.
A rational and realistic rock mass modelling strategy for the stability analysis of blocky rock mass
Due to the importance of a realistic rock mass model for the achievement of accurate and reliable results from numerical analysis of blocky rock mass, a probability based rock mass geometrical model is proposed in the present study. The rock mass geometry is built based on site investigation data and stochastic analysis of the discontinuity mapping results. The discontinuities and/or sets of them, either finite or infinite in size, planar or non-planar, convex or concave in shape, can be implemented in the three-dimensional rock mass model. Key block analysis and support design are then suggested to the stochastic rock mass models. To achieve a realistic stability analysis of the rock mass with the proposed probabilistic rock mass model, a few suggestions have also been made. These include the adoption of realistic constitutive models to intact rock and rock discontinuities, use of numerical model to technically handle numerical difficulties and development of a realistic modelling strategy to achieve realistic and affordable computational cost, etc. 相似文献
3.
准确、高效、全面获取岩体结构面信息,对岩体的稳定性分析有着重要的意义.采用三维激光扫描设备进行岩体数据采集,基于岩体点云模型提出了结构面自动识别方法.通过对Ransac算法进行改进,引入了新的采样方法和评分准则,大大提升了Ransac算法的计算效率和提取精度,使之更好地适应粗糙不平的岩体点云数据;基于改进的Graham Scan算法可以精准描绘出结构面的凸凹边界,进而精细化计算出结构面尺寸.基于以上算法研发了结构面识别程序RDD（ransac discontinuity dtection）,并且采用了两组标准几何体数据和一组岩体数据对程序进行测试.结果表明,标准几何体产状误差在1°以内,实际岩体最大误差在6°以内,结构面尺寸最大误差率为0.278%,满足工程限定的误差要求. 相似文献
4.
针对传统现场接触式测量获取岩体结构面参数效率低、工作量大、结果精确性受人为因素影响等问题,本文结合数字摄影测量技术与运动法（structure from motion,SFM）进行岩体三维数字表面模型重建,并在此基础上建立了岩体结构面自动识别方法。岩体数字表面模型重建步骤主要为岩体影像资料采集,基于尺度不变特征变换（Scale-Invariant Feature Transform,SIFT）算法进行图像特征匹配、稀疏点云构建、点云稠密化以及岩体曲面模型重构。结构面识别方法流程主要为:首先平滑岩体数字表面模型;通过改变搜索半径和角度阈值实现模型平面分割;基于区域生长原理进行结构面搜索;最后基于随机采样一致性拟合结构面得到结构面产状。将该方法应用于甘肃北山地下实验巷道,实现了巷道三维数字表面模型的重建与结构面产状数据获取,最后将识别到的结构面分组表征在模型表面。与人工实地测量方法以及现有的结构面识别软件相比,本文提出的方法具有良好的准确性,可为工程应用提供一定的参考。 相似文献
5.
天然岩体中常含有多组相互交叉的贯通节理,它们的存在极大地削弱了岩体的力学性质。为了研究含两组交叉贯通节理岩体的强度及破坏特征,基于弹塑性数值流形方法,对不同应力状态下,节理倾角和节理间距不同的岩体压缩试验进行数值模拟。结果表明：岩体强度随节理倾角的变化曲线呈现出多波峰、多波谷特点,岩体强度随节理间距变化曲线符合负指数函数形式。根据节理状态,两组节理岩体的破坏模式可以分为3种：岩块破坏、沿一组节理滑移和沿两组节理滑移。两组节理均会影响岩体强度,一组起主要作用,另一组起次要作用,并且节理组之间存在相互影响。通过对数值计算结果进行回归分析,基于一组节理岩体强度预测模型,量化节理组之间的相互影响,提出适用于含两组交叉贯通节理岩体的强度预测模型。模型形式简单,使用方便,可为实际工程中正确评估岩体强度提供指导性意见。 相似文献
6.
结构面网络模拟是获取岩体结构模型的主要手段。基于网络模拟结果建立岩体力学或水力学分析模型,然后开展精细数值模拟研究,是岩石力学领域具有良好前景的发展方向。但目前尚没有成熟的分析软件能够将网络模拟结果转化为能用于力学或水力学计算的单元网格,针对这一现状,开发了一整套结构面网络模拟结果后处理程序,利用该程序,可以方便地将网络模拟结果转化为能用于水力学计算的连通水力网络,以及能用于力学分析的包含节理单元的有限元网格。并对相关的程序算法和实现过程作了详尽的介绍,希望能够对从事该领域研究工作的同行有参考价值。 相似文献
7.
用数值方法对岩质高边坡进行稳定性分析时,描述岩体结构对的精细程度会影响分析结果,但常见的有限单元法程序仍难以对复杂节理岩体进行精细建模。为解决这一问题,将结构面网络模拟与离散单元法相结合,在UDEC软件中,利用FISH语言编写网络模拟程序,依据结构面统计资料和结构面分级,实现对复杂岩体结构的精细描述。以某大型水电工程边坡为例,在对岩体结构进行精细描述的基础上,采用离散元强度折减法对边坡进行稳定性分析。通过与极限平衡法和一般离散元结果的对比,表明基于复杂岩体结构精细描述确定的边坡潜在滑动面和安全系数是合理的,为复杂岩质边坡破坏模式和稳定性的分析提供了新的途径。 相似文献
8.
Hatem Gasmi Essaïeb Hamdi Nejla Bouden Romdhane 《Rock Mechanics and Rock Engineering》2014,47(4):1393-1409
Homogenization in fractured rock analyses is essentially based on the calculation of equivalent elastic parameters. In this paper, a new numerical homogenization method that was programmed by means of a MATLAB code, called HLA-Dissim, is presented. The developed approach simulates a discontinuity network of real rock masses based on the International Society of Rock Mechanics (ISRM) scanline field mapping methodology. Then, it evaluates a series of classic joint parameters to characterize density (RQD, specific length of discontinuities). A pulse wave, characterized by its amplitude, central frequency, and duration, is propagated from a source point to a receiver point of the simulated jointed rock mass using a complex recursive method for evaluating the transmission and reflection coefficient for each simulated discontinuity. The seismic parameters, such as delay, velocity, and attenuation, are then calculated. Finally, the equivalent medium model parameters of the rock mass are computed numerically while taking into account the natural discontinuity distribution. This methodology was applied to 17 bench fronts from six aggregate quarries located in Tunisia, Spain, Austria, and Sweden. It allowed characterizing the rock mass discontinuity network, the resulting seismic performance, and the equivalent medium stiffness. The relationship between the equivalent Young’s modulus and rock discontinuity parameters was also analyzed. For these different bench fronts, the proposed numerical approach was also compared to several empirical formulas, based on RQD and fracture density values, published in previous research studies, showing its usefulness and efficiency in estimating rapidly the Young’s modulus of equivalent medium for wave propagation analysis. 相似文献
9.
选用三参数标准线性固体作为岩石本构,提出了一种考虑岩体黏弹性的位移不连续模型;根据一维黏弹性波的特征线法,推导了节理处质点速度、应力和应变递推公式。首先,基于分离式霍普金森压杆（SHPB）对砂层进行试验,得到其应力-应变关系,并换算出砂层节理的法向刚度;接着,通过一维强间断黏弹性波的波速公式、高频波衰减系数以及任一频率下的衰减系数,确定出数值算法中的三参数。最后,基于自制的摆锤装置,探讨了一维应力波在节理岩体中的传播规律,试验中以两根长1 000 mm、直径为68.50 m的岩杆作为入射和透射杆,以3 mm砂层模拟节理。试验和数值结果吻合度良好,进一步验证了该方法的可靠性。 相似文献
10.
This paper presents a numerical study of thermal shock weakening of granite rock under dynamic loading. A fully 3D numerical scheme based on a combined continuum viscodamage-embedded discontinuity model and an explicit scheme to solve the underlying thermomechanical problem was developed and validated through numerical examples. First, the dynamic Brazilian disc test is simulated on intact numerical rock. Then, thermal shock-induced cracking due to a moving external heat flux boundary condition, mimicking experiments based on plasma jet treatment, is numerically predicted. Finally, numerical Brazilian disc test is conducted on the thermal shocked numerical samples. The predicted and experimental weakening effects are in good agreement demonstrating that the present modeling approach has good predictive capabilities. The practical significance of the results is that heat shock pretreatment can substantially enhance rock gravel and rubble crushing. 相似文献
11.
12.
天然岩体中广泛发育两侧岩性不同的异性结构面,开展异性结构面变形和强度特性研究旨在为岩体稳定性评价和利用提供依据。选取三峡库区侏罗系典型的砂岩-泥岩异性岩层,首先运用分形几何理论,定量计算了平直和4种不同不规则起伏形态结构面的粗糙度系数JRC值,然后基于PFC2D颗粒流程序,分别开展了以上5种形态异性结构面的数值剪切试验,获得了各形态结构面在不同正应力下的剪切应力-位移曲线。根据数值试验结果,采用巴顿的JRC-JCS模型分析了异性结构面强度特性,并与同性结构面强度性质进行对比研究。最后,在考虑异性结构面剪切破坏机制的基础上,引入强度因子的概念,提出了新的适用于异性结构面强度评价的两类改进巴顿准则。研究结果表明：异性岩体结构面抗剪强度介于相同粗糙度的两种同性结构面强度之间,在较低正应力下接近软岩同性结构面强度,符合Ⅰ型改进巴顿准则;在较高正应力下偏向硬岩同性结构面强度,符合Ⅱ型改进巴顿准则。实际工程中可利用改进准则并根据异性结构面应力状态对岩体稳定性进行评价,弥补了以往研究的不足。 相似文献
13.
岩体结构面优势分组是研究岩体力学性质与水力特性的基础,通常的分析方法是只根据产状进行划分。鉴于结构面其他特征对岩体力学性质的重要影响,考虑结构面倾向、倾角、迹长、张开度、表面形态5个特征参数,提出了基于人工蜂群算法的岩体结构面多参数优势分组方法。以样本总体离差平方和为目标函数,建立岩体结构面多参数优势分组的数学模型,应用人工蜂群优化算法求解,以目标函数值最小时的解作为聚类中心,并自动确定分组边界。对人工生成的结构面数据的计算结果验证了该方法的正确性,该方法的求解精度是令人满意的。最后,将该方法应用于怒江松塔水电站坝址区岩体结构面多参数优势组的划分,得到了较为合理的分组结果,进一步验证了此方法具有较高的运行效率与工程实用性。 相似文献
14.
岩体结构特征的准确表征对边坡稳定性评价具有重要影响。由于高陡边坡岩体结构的人工编录工作开展困难,结构几何信息往往获取不全面,导致边坡数值模型构建往往不理想。以江西德兴银山铜矿露天边坡为工程背景,采用无人机与运动恢复结构法(SfM)获取边坡岩体点云模型。基于点云数据建立结构面识别和解译算法,自动获取结构面产状、迹长、间距等几何信息。对比人工测量结果,无人机测量与结构面识别能够获取更符合实际的坡面与岩体结构模型。采用非均匀有理B样条(NURBS)曲面重构和“Rhino-Griddle-3DEC”联合建模方法,结合岩体结构统计模型构建离散裂隙网络DFN能够快速建立三维离散元数值模型,从而获得更好的数值模拟计算结果,满足岩质高边坡稳定性评价的需要。 相似文献
15.
Inherent microcrack populations have a significant effect on the fracture behaviour of natural rocks. The present study addresses this topic in numerical simulations of uniaxial tension and three-point bending tests. For this end, a rock fracture model based on multiple intersecting embedded discontinuity finite elements is developed. The inherent (pre-existing) microcrack populations are represented by pre-embedded randomly oriented discontinuity populations. Crack shielding (through spurious locking) is prevented by allowing a new crack to be introduced, upon violation of the Rankine criterion, in an element with an initial crack unfavourably oriented to the loading direction. Rock heterogeneity is accounted for by random clusters of triangular finite elements representing different minerals of granitic numerical rock. Numerical simulations demonstrate the strength lowering effect of initial microcrack populations. This effect is substantially stronger under uniaxial tension, due to the uniform stress state, than in semicircular three-point bending having a non-uniform stress state with a clear local maximum of tensile stress.
相似文献16.
In nature, there exist several forms of anisotropy in rock masses due to the presence of bedding planes, joints, and weak layers. It is well understood that the anisotropic properties of jointed rock masses significantly affect the stability of surface and underground excavations. However, these critical anisotropic characteristics are often ignored in existing uniaxial dynamic failure criteria. This study investigates the effect of a pre-existing persistent joint on the rate-dependent mechanical behaviours of a rock mass using a particle mechanics approach, namely, bonded particle model (BPM), to realistically replicate the mechanical response of the rock mass. Firstly, in order to capture the rate-dependent response of the jointed rock mass, the BPM model is validated using published experimental data. Then, a dynamic strength model is proposed based on the Jaeger criterion and simulation results. To further investigate the dynamic behaviours, the dynamic uniaxial compressive strength (UCS) for anisotropic rock masses with various joint orientations is investigated by subjecting the BPM models to uniaxial compression numerical tests with various strain rate. The proposed dynamic strength model is validated based on numerical simulation results. Finally, the fragmentation characteristics of the jointed rock masses are analysed, which demonstrate that the failure mode affects the dynamic UCS. This is further confirmed by the analysis of the orientations of microscopic cracks generated by the compression loading. 相似文献
17.
基于岩体结构面分布分形维的岩体质量评价 总被引：4，自引：1，他引：3
尽管岩体结构面具有空间上的不规则性和结构网络上的复杂性,但由于它又具有自相似的特征,可以运用分形理论来对其进行研究。运用盒计维数法对某矿山巷道围岩体结构面分布的分维数进行计算,验证了岩体结构面分布的分形特征。通过对岩体结构面分布分形维值分布规律的分析发现,分形维数越大、结构面分布越密集,结构面迹线越长,岩体质量越差,表明可将岩体结构面分布的分形维作为岩体质量评价的指标。将计算所得的岩体结构面分布的分维数与按工程岩体分级标准对相应岩体分级所得的岩体质量等级进行对比,提出了一个以岩体结构面分布的分形维作为分级指标的岩体质量评价方案。 相似文献
18.
Elastic moduli for fractured rock mass 总被引：8，自引：1，他引：8
Summary The presence of joint discontinuities has long been recognized as an important factor influencing the mechanical behavior of rock masses. This paper proposes a stress-strain model for an assemblage of intact rock blocks separated by joint planes. The stress-strain relationship accounts for spacings and orientations of the joint sets. Closed-form expressions of elastic moduli for a rock mass with three intersecting sets of joints are derived explicitly in terms of properties of joints and intact rock. Applicability of the derived expressions are evaluated by comparing the predicted results with experimental results from physical model tests. 相似文献
19.
20.
预制节理岩体试件强度及破坏模式的试验研究 总被引：2，自引：0，他引：2
采用相似材料模型试验对不同节理倾角、节理贯通度、节理组数、载荷应变率、试件长径比、节理充填物厚度及类型等7种工况下的预制节理岩体在单轴压缩下的峰值强度及破坏模式进行了研究。结果表明：节理岩体的破坏模式及峰值强度与节理构造形态密切相关。贯通节理岩体将产生沿节理面的剪切破坏或穿切节理面破坏,且与第1种破坏模式对应的岩体峰值强度更低。非贯通节理岩体的强度介于完整岩体和贯通节理岩体之间。随着平行节理组数的增加,岩体峰值强度逐渐下降。随着载荷应变率的增加,岩体峰值强度逐渐增大,相应地试件的破坏模式也变得更加复杂。试件长径比基本没有改变其破坏模式,完整试件仍主要是以张拉破坏为主,而节理试件仍以剪切破坏为主。随着长径比增加,试件峰值强度逐渐增大。随着节理充填物厚度增加,试件峰值强度降低。不同节理填充物对试件峰值强度也有一定影响。 相似文献