共查询到20条相似文献，搜索用时 31 毫秒
1.
A series of laboratory column tests on reactive mine tailings was numerically simulated to study the effect of high water saturation on preventing sulfide mineral oxidation and acid mine drainage (AMD). The approach, also known as an elevated water table (EWT), is a promising alternative to full water covers for the management and closure of sulfidic tailings impoundments and for the long term control of acid mine drainage. The instrumented columns contained reactive tailings from the Louvicourt mine, Quebec, and were overlain by a protective sand cover. Over a 13–19 month period, the columns were exposed to atmospheric O2 and flushed approximately every month with demineralized water. A free draining control column with no sand cover was also used. During each cycle, water table elevations were controlled by fixing the pressure at the column base and drainage water was collected and analyzed for pH and Eh, major ions, and dissolved metals (Fe, Zn, Cu, Pb, and Mg). The columns were simulated using the multi-component reactive transport model MIN3P which solves the coupled nonlinear equations for transient water flow, O2 diffusion, advective–dispersive transport and kinetic geochemical reactions. Physical properties and mineralogical compositions for the material layers were obtained from independent laboratory data. The simulated and observed data showed that as the water table elevation increased, the effluent pH became more neutral and SO4 and dissolved metal concentrations decreased by factors on the order of 102–103. It is concluded that water table depths less than or equal to one-half of the air entry value (AEV) can keep mine tailings sufficiently saturated over the long term, thus reducing sulfide oxidation and AMD production. 相似文献
2.
Tailings generated during processing of sulfide ores represent a substantial risk to water resources. The oxidation of sulfide minerals within tailings deposits can generate low-quality water containing elevated concentrations of SO4, Fe, and associated metal(loid)s. Acid generated during the oxidation of pyrite [FeS2], pyrrhotite [Fe(1−x)S] and other sulfide minerals is neutralized to varying degrees by the dissolution of carbonate, (oxy)hydroxide, and silicate minerals. The extent of acid neutralization and, therefore, pore-water pH is a principal control on the mobility of sulfide-oxidation products within tailings deposits. Metals including Fe(III), Cu, Zn, and Ni often occur at high concentrations and exhibit greater mobility at low pH characteristic of acid mine drainage (AMD). In contrast, (hydr)oxyanion-forming elements including As, Sb, Se, and Mo commonly exhibit greater mobility at circumneutral pH associated with neutral mine drainage (NMD). These differences in mobility largely result from the pH-dependence of mineral precipitation–dissolution and sorption–desorption reactions. Cemented layers of secondary (oxy)hydroxide and (hydroxy)sulfate minerals, referred to as hardpans, may promote attenuation of sulfide-mineral oxidation products within and below the oxidation zone. Hardpans may also limit oxygen ingress and pore-water migration within sulfide tailings deposits. Reduction–oxidation (redox) processes are another important control on metal(loid) mobility within sulfide tailings deposits. Reductive dissolution or transformation of secondary (oxy)hydroxide phases can enhance Fe, Mn, and As mobility within sulfide tailings. Production of H2S via microbial sulfate reduction may promote attenuation of sulfide-oxidation products, including Fe, Zn, Ni, and Tl, via metal-sulfide precipitation. Understanding the dynamics of these interrelated geochemical and mineralogical processes is critical for anticipating and managing water quality associated with sulfide mine tailings. 相似文献
3.
《Applied Geochemistry》2002,17(4):431-443
A steady state geochemical model has been developed to assist in understanding surface-catalysed oxidation of aqueous Fe(II) by O2(aq), which occurs rapidly at circumneutral pH. The model has been applied to assess the possible abiotic removal of Fe(II)(aq) from alkaline ferruginous mine water discharges using engineered reactors with high specific-surface area filter media. The model includes solution and surface speciation equilibrium, oxidation kinetics of dissolved and adsorbed Fe(II) species and mass transfer of O2(g). Limited field data for such treatment of a mine water discharge were available for model development and assessment of possible parameter values. Model results indicate that an adsorption capacity between 10−6 and 10−5 mol l−1 is sufficient for complete removal, by oxidation, of the Fe(II)(aq) load at the discharge. This capacity corresponds approximately to that afforded by surface precipitation of Fe(III) oxide onto plastic trickling filter media typically used for biological treatment of wastewater. Extrapolated literature values for microbial oxidation of Fe(II)(aq) by neutrophilic microbial populations to the simulated reactor conditions suggested that the microbially-mediated rate may be several orders-of-magnitude slower than the surface-catalysed oxidation. Application of the model across a range of mine water discharge qualities shows that high Fe(II)(aq) loadings can be removed if the discharge is sufficiently alkaline. Additional reactor simulations indicate that reactor efficiency decreases dramatically with pH in the near acid region, coinciding with the adsorption edge for Fe2+ on Fe oxyhydroxide. Alkaline discharges thus buffer pH within the range where Fe(II)(aq) adsorbs onto the accreting Fe hydroxide mineral surface, and undergoes rapid catalytic oxidation. The results suggest that the proposed treatment technology may be appropriate for highly ferruginous alkaline discharges, typically associated with abandoned deep coal mines. 相似文献
4.
The use of covers with capillary barrier effects (CCBEs) for reducing acid mine drainage (AMD) from sulphidic mine tailings is simulated using the MIN3P finite volume model for coupled groundwater flow, O2 diffusion and multi-component reactive transport. The model is applied to simulate five pilot-scale in situ test cells containing reactive tailings from the Manitou mine site, Val d’Or, Que., Canada. Four of the cells were constructed with CCBEs over the tailings, while the fifth tailings cell was left uncovered. Observed and simulated discharge from the base of each cell showed that the capillary barrier covers significantly reduced sulphide oxidation and AMD. Compared to acidic discharge from the uncovered cell, discharge from the four CCBE-covered cells had neutral pH levels and 1–7 orders of magnitude lower concentrations of SO4, Fe, Zn, Cu and Al. The simulations showed that the moisture retaining layer of the CCBEs reduced AMD by inhibiting O2 diffusion into the underlying reactive wastes. Provided the moisture-retention layer of the CCBE remains close to saturation, its thickness had a relatively minor effect. Under such near-saturated conditions, O2 availability is limited by its diffusion rate through the bulk porous medium and not by the diffusion rate through the oxidized grain shells. The model is providing important new insights for comparing design alternatives for reducing or controlling AMD. 相似文献
5.
6.
Acid neutralization mechanisms and metal release in mine tailings: a laboratory column experiment 总被引：1，自引：0，他引：1
Jasna Jurjovec Carol J. Ptacek David W. Blowes 《Geochimica et cosmochimica acta》2002,66(9):1511-1523
Mining and milling of base metal ore deposits can result in the release of metals to the environment. When sulfide minerals contained in mine tailings are exposed to oxygen and water, they oxidize and dissolve. Two principal antagonistic geochemical processes affect the migration of dissolved metals in tailings impoundments: sulfide oxidation and acid neutralization. This study focuses on acid neutralization reactions occurring in the saturated zone of tailings impoundments. To simulate conditions prevailing in many tailings impoundments, 0.1 mol/L sulfuric acid was passed continuously through columns containing fresh, unoxidized tailings, collected at Kidd Creek metallurgical site. The results of this column experiment represent a detailed temporal observation of pH, Eh, and metal concentrations. The results are consistent with previous field observations, which suggest that a series of mineral dissolution-precipitation reactions control pH and metal mobility. Typically, the series consists of carbonate minerals, Al and Fe(III) hydroxides, and aluminosilicates. In the case of Kidd Creek tailings, the dissolution series consists of ankerite-dolomite, siderite, gibbsite, and aluminosilicates. In the column experiment, three distinct pH plateaus were observed: 5.7, 4.0, and 1.3. The releases of trace elements such as Cd, Co, Cr, Cu, Li, Ni, Pb, V, and Zn were observed to be related to the pH buffering zones. High concentrations of Zn, Ni, and Co were observed at the first pH plateau (pH 5.7), whereas Cd, Cr, Pb, As, V, and Al were released as the pH of the pore water decreased to 4.0 or less. 相似文献
7.
《Journal of Geochemical Exploration》2002,76(3):139-153
This work focuses on sulfide mineral oxidation rates under oxic conditions in freshly processed pyrite-rich tailings from the ore concentrator in Boliden, northern Sweden. Freshly processed tailings are chemically treated in the plant to kill bacteria and to obtain increased metal yields, resulting in a high pH level of 10–12 in the process water. Different oxidation experiments (abiotic oxidation in untreated tailings, acid abiotic oxidation and acid microbial oxidation), containing the Boliden tailings, were performed at room temperature with dissolved oxygen (0.21 atm O2) for 3 months. The different pyrite oxidation rates given from the study were 2.4×10−10 mol m−2 s−1 for the microbial, 5.9×10−11 mol m−2 s−1 for the acidic abiotic and 3.6×10−11 mol m−2 s−1 for the untreated experiments. Because of the potential precipitation of gypsum in the batch solutions, these oxidation rates are considered minimum values. The release rates for copper and zinc from chalcopyrite and sphalerite in the acid experiments were also investigated. These rates were normalized to the metal concentration in the tailings, and then compared to the release rate for iron from pyrite. These normalized results indicated that metal release decreased in the order Cu>Zn>Fe, demonstrating that pyrite is more resistant to oxidation than sphalerite and chalcopyrite. Pyrite was also more resistant to acidic dissolution than to microbial dissolution, while a significant fraction of sphalerite and chalcopyrite dissolved in the acid abiotic solutions. 相似文献
8.
Redistribution of potentially harmful metals and As was studied based on selective extractions in two active sulphide mine tailings impoundments in Finland. The Hitura tailings area contains residue from Ni ore processing, while the Luikonlahti site includes tailings from the processing of Cu–Co–Zn–Ni and talc ores. To characterize the element solid-phase speciation with respect to sulphide oxidation intensity and the water saturation level of the tailings, drill cores were collected from border zones and mid-impoundment locations. The mobility and solid-phase fractionation of Ni, Cu, Co, Zn, Cr, Fe, Ca, Al, As, and S were analysed using a 5-step non-sequential (parallel) selective extraction procedure. The results indicated that metal redistribution and sulphide oxidation intensity were largely controlled by the disposal history and strategy of the tailings (sorting, exposure of sulphides due to delayed burial), impoundment structure and water table, and reactivity of the tailings. Metal redistribution suggested sulphide weathering in the tailings surface, but also in unsaturated proximal areas beside the earthen dams, and in water-saturated bottom layers, where O2-rich infiltration is possible. Sulphide oxidation released trace metals from sulphide minerals at both locations. In the Hitura tailings, with sufficient buffering capacity, pH remained neutral and the mobilized metals were retained by secondary Fe precipitates deeper in the oxidized zone. In contrast, sulphide oxidation-induced acidity and rise in the water table after oxidation apparently remobilized the previously retained metals in Luikonlahti. In general, continuous disposal of tailings decreased the sulphide oxidation intensity in active tailings, unless there was a delay in burial and the reactive tailings were unsaturated after deposition. 相似文献
9.
Stephanie L. DeSisto Heather E. Jamieson Michael B. Parsons 《Applied Geochemistry》2011,26(12):2004-2018
Hardpans, or cemented layers, form by precipitation and cementation of secondary minerals in mine tailings and may act as both physical and chemical barriers. Precipitation of secondary minerals during weathering of tailings can sequester metal(loid)s, thereby limiting their release to the environment. At Montague Gold Mines in Nova Scotia, tailings are partially cemented by the Fe arsenate mineral scorodite (FeAsO4·2H2O). Previous studies have shown that the formation of scorodite can effectively limit aqueous As concentrations due to its relatively low solubility (<1 mg/L at pH 3–4) and high As content (43–52 wt.% As2O5, this study). Co-existing waters and solids were sampled at Montague Gold Mines to identify present-day field conditions influencing scorodite precipitation and dissolution, and to better understand the mineralogical and chemical relationship between hardpan and tailings. In addition to scorodite, hardpan cements were found to include amorphous Fe arsenate and Fe oxyhydroxide. Nearly all hardpan is associated with historical arsenopyrite-bearing concentrate which provides a source of acidity, As5+ and Fe3+ for secondary mineral precipitation. Pore waters sampled from the hardpan have pH values ranging from 2.43 to 7.06. Waters with the lowest pH values also have the highest As concentrations (up to 35.8 mg/L) and are associated with the most extensive hardpan and greatest amount of weathered sulfide. Samples from areas with discontinuous hardpan and less sulfide have near-neutral pH and lower As concentrations. Detailed petrographic observations indicate that the identity and stability of As-bearing secondary minerals depends on the continued availability of sulfide concentrate. The results of this study are being used to develop remediation strategies for highly weathered, hardpan-bearing tailings that consider the stability of both primary and secondary minerals under various cover scenarios. 相似文献
10.
Matthew B.J. Lindsay Peter D. Condon John L. Jambor Kerry G. Lear David W. Blowes Carol J. Ptacek 《Applied Geochemistry》2009
Mineralogical, geochemical and microbial characterization of tailings solids from the Greens Creek Mine, Juneau, Alaska, was performed to evaluate mechanisms controlling aqueous geochemistry of near-neutral pH pore water and drainage. Core samples of the tailings were collected from five boreholes ranging from 7 to 26 m in depth. The majority of the 51 samples (77%) were collected from the vadose zone, which can extend >18 m below the tailings surface. Mineralogical investigation indicates that the occurrence of sulfide minerals follows the general order: pyrite [FeS2] >> sphalerite [(Zn,Fe)S] > galena [PbS], tetrahedrite [(Fe,Zn,Cu,Ag)12Sb4S13] > arsenopyrite [FeAsS] and chalcopyrite [CuFeS2]. Pyrite constitutes <20 to >35 wt.% of the tailings mineral assemblage, whereas dolomite [CaMg(CO3)2] and calcite [CaCO3] are present at ?30 and 3 wt.%, respectively. The solid-phase geochemistry generally reflects the mineral assemblage. The presence of additional trace elements, including Cd, Cr, Co, Mo, Ni, Se and Tl, is attributed to substitution into sulfide phases. Results of acid–base accounting (ABA) underestimated both acid-generating potential (AP) and neutralization potential (NP). Recalculation of AP and NP based on solid-phase geochemistry and quantitative mineralogy yielded more representative results. Neutrophilic S-oxidizing bacteria (nSOB) and SO4-reducing bacteria (SRB) are present with populations up to 107 and 105 cells g−1, respectively. Acidophilic S-oxidizing bacteria (aSOB) and iron-reducing bacteria (IRB) were generally less abundant. Primary influences on aqueous geochemistry are sulfide oxidation and carbonate dissolution at the tailings surface, gypsum precipitation–dissolution reactions, as well as Fe reduction below the zone of sulfide oxidation. Pore-water pH values generally ranged from 6.5 to 7.5 near the tailings surface, and from approximately 7–8 below the oxidation zone. Elevated concentrations of dissolved SO4, S2O3, Fe, Zn, As, Sb and Tl persisted under these conditions. 相似文献
11.
《Applied Geochemistry》2006,21(2):269-288
Reliable quantification of mineral weathering rates is a key to assess many environmental problems. In this study, the authors address the applicability of pure mineral laboratory rate laws for dissolution of mill tailings samples. Mass-normalised sulfide and aluminosilicate mineral dissolution rates, determined in oxygenated batch experiments, were found to be different between two samples from the same ∼50-year-old, carbonate-depleted mill tailings deposit. Consideration of difference in particle surface area and mineralogy between the samples resolved most of this discrepancy in rates. While the mineral surface area normalised dissolution rates of pyrite in a freshly crushed pure pyrite specimen and a sulfide concentrate derived from the tailings were within the range of abiotic literature rates of oxidation by dissolved molecular O2, as were rates of sphalerite and chalcopyrite dissolution in the tailings, dissolution rates of pyrite and aluminosilicates in the tailings generally differed from literature values. This discrepancy, obtained using a consistent experimental method and scale, is suggested to be related to difficulties in quantifying individual mineral reactive surface area in a mixture of minerals of greatly varying particle size, possibly due to factors such as dependence of surface area-normalised mineral dissolution rates on particle size and time, or to non-proportionality between rates and BET surface area. 相似文献
12.
Arsenic sulfide (AsS (am), As2S3 (am), orpiment, and realgar) oxidation rates increase with increasing pH values. The rates of arsenic sulfide oxidation at higher pH values relative to those at pH∼2 are in the range of 26-4478, 3-17, 8-182, and 4-10 times for As2S3 (am), orpiment, AsS (am), and realgar, respectively.Numerical simulations of orpiment and realgar oxidation kinetics were conducted using the geochemical reaction path code EQ3/6 to evaluate the effects of variable DO concentrations and mineral reactivity factors on water chemistry evolution during orpiment and realgar oxidation. The results show that total As concentrations increase by ∼1.14 to 13 times and that pH values decrease by ∼0.6 to 4.2 U over a range of mineral reactivity factors from 1% to 50% after 2000 days (5.5 yr). The As release from orpiment and realgar oxidation exceeds the current U.S. National Drinking Water Standard (0.05 ppm) approximately in 200-300 days at the lowest initial dissolved oxygen concentration (3 ppm) and a reactivity factor of 1%. The results of simulations of orpiment oxidation in the presence of albite and calcite show that calcite can act as an effective buffer to the acid water produced from orpiment oxidation within relatively short periods (days/months), but the release of As continues to increase.Pyrite oxidation rates are faster than orpiment and realgar from pH 2.3 to 8; however, pyrite oxidation rates are slower than As2S3 (am) and AsS (am) at pH 8. The activation energies of arsenic sulfide oxidation range from 16 to 124 kJ/mol at pH∼8 and temperature 25 to 40°C, and pyrite activation energies are ∼52 to 88 kJ/mol, depending on pH and temperature range. The magnitude of activation energies for both pyrite and arsenic sulfide solids indicates that the oxidation of these minerals is dominated by surface reactions, except for As2S3 (am). Low activation energies of As2S3 (am) indicate that diffusion may be rate controlling.Limestone is commonly mixed with sulfide minerals in a mining environment to prevent acid water formation. However, the oxidation rates of arsenic sulfides increase as solution pH rises and result in a greater release of As. Furthermore, the lifetimes of carbonate minerals (i.e., calcite, aragonite, and dolomite) are much shorter than those of arsenic sulfide and silicate minerals. Thus, within a geologic frame time, carbonate minerals may not be present to act as a pH buffer for acid mine waters. Additionally, the presence of silicate minerals such as pyroxenes (wollastonite, jadeite, and spodumene) and Ca-feldspars (labradorite, anorthite, and nepheline) may not be important for buffering acid solutions because these minerals dissolve faster than and have shorter lifetimes than sulfide minerals. However, other silicate minerals such as Na and K-feldspars (albite, sanidine, and microcline), quartz, pyroxenes (augite, enstatite, diopsite, and MnSiO3) that have much longer lifetimes than arsenic sulfide minerals may be present in a system. The results of our modeling of arsenic sulfide mineral oxidation show that these minerals potentially can release significant concentrations of dissolved As to natural waters, and the factors and mechanisms involved in arsenic sulfide oxidation warrant further study. 相似文献
13.
《Applied Geochemistry》1999,14(4):511-530
The oxidation of Fe(II) is apparently the rate-limiting step in passive treatment of coal mine drainage. Little work has been done to determine the kinetics of oxidation in such field systems, and no models of passive treatment systems explicitly consider iron oxidation kinetics. A Stella II™ model using Fe(II)init concentration, pH, temperature, Thiobacillus ferrooxidans and O2 concentration, flow rate, and pond volume is used to predict Fe(II) oxidation rates and concentrations in seventeen ponds under a wide range of conditions (pH 2.8 to 6.8 with Fe(II) concentrations of less than 240 mg L−1) from 6 passive treatment facilities. The oxidation rate is modeled based on the combination of published abiotic and biological laboratory rate laws. Although many other variables have been observed to influence Fe(II) oxidation rates, the 7 variables above allow field systems to be modeled reasonably accurately for conditions in this study.Measured T. ferrooxidans concentrations were approximately 107 times lower than concentrations required in the model to accurately predict field Fe(II) concentrations. This result suggests that either 1) the most probable number enumeration method underestimated the bacterial concentrations, or 2) the biological rate law employed underestimated the influence of bacteria, or both. Due to this discrepancy, bacterial concentrations used in the model for pH values of less than 5 are treated as fit parameters rather than empirically measured values.Predicted Fe(II) concentrations in ponds agree well with measured Fe(II) concentrations, and predicted oxidation rates also agree well with field-measured rates. From pH 2.8 to approximately pH 5, Fe(II) oxidation rates are negatively correlated with pH and catalyzed by T. ferrooxidans. From pH 5 to 6.4, Fe(II) oxidation appears to be primarily abiotic and is positively correlated with pH. Above pH 6.4, oxidation appears to be independent of pH. Above pH 5, treatment efficiency is affected most by changing design parameters in the following order: pH>temperature≈influent Fe(II)>pond volume≈O2. Little to no increase in Fe(II) oxidation rate occurs due to pH increases above pH 6.4. Failure to consider Fe(II) oxidation rates in treatment system design may result in insufficient Fe removal. 相似文献
14.
《Applied Geochemistry》2002,17(8):1105-1114
Tailings from the Macraes Au mine cyanidation process are stored in an impoundment about 0.6 km2 and 80 m deep whose pH is maintained near 8 by the neutralizing capacity of the gangue minerals. The tailings are sandy (>50 μm particles), have a hydraulic conductivity of about 10−2 m/day, and contain 0.1–1.0 wt.% S and 0.1–1.5 wt.% graphitic C from the primary deposit. Concentrations of As in the pore water of the mixed tailings, which are a combination of various tailings types, range from 0.1 to 20 ppm, HCO3- is 100 to 200 ppm, and dissolved SO4 is 100–1700 ppm. The mixed tailings will be stored in this impoundment in perpetuity after mining ceases. Confidence in the long-term pH stability of these tailings can be gained from examination of mineralogically and chemically similar geological analogues in the immediate vicinity. A sequence, typically about 5 m thick, of sands and gravels derived from the Macraes mineralized zone 12–28 ka ago contains rounded detrital sulfide mineral grains which are unoxidized despite their close proximity to the surface and the occasional incursion of oxygenated waters. These sediments have a hydraulic conductivity of about 10−4 m/day. Saturating water pH is currently 7–8. Sands with 0.2–0.8 wt.% organic C host SO4-reducing bacteria (SRB), and local cementation by authigenic framboidal pyrite has occurred. SRB were found in water-saturated sediments with decreased hydraulic conductivity and alkaline and anoxic conditions. These bacteria are involved in the formation of authigenic framboidal pyrite, reducing the cycling of dissolved Fe in the sediments. Carbon is not a limiting factor in this process as organic matter is present in the sandstone and ground water contains up to 180 ppm HCO3-. Comparison of the 28 ka old sediments with the modern tailings suggests that the chemical behaviour of the two will be similar, possibly with the crystallization of authigenic pyrite in the tailings over the long term. As long as the present slightly anoxic and circumneutral pH environmental conditions are maintained in the mixed tailings impoundment, sulfide decomposition and acidification are unlikely. 相似文献
15.
16.
《Chemie der Erde / Geochemistry》2021,81(4):125798
Many abandoned mine sites in Cornwall, UK, are characterised by elevated concentrations of arsenic (As), which can cause contamination of surrounding soil and water resources. These sites have important historical value that requires access to be maintained, despite exposure of humans to toxins that may lead to health issues including hyperpigmentation keratosis (including skin cancers) and liver fibrosis. The abandoned mine tailings at Wheal Maid has been assessed for As-bearing mineralogy and stability taking into account the public footpaths made by the local council to areas of potential contamination.To assess the potential risk associated with these mine sites, the As concentration in waters along the tailings dam and Carnon River have been measured and range up to 3.6 ppm, which is 2 orders of magnitude above the WHO guideline value of 0.01 ppm for drinking water. Samples of water, rocks and soils from the mine tailings ponds and the Carnon River were analysed using Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES) and Inductively Coupled Plasma – Mass Spectrometry (ICP-MS) to determine the concentration of individual elements in each sample followed by mineral identification using X-Ray Diffraction (XRD). Mineralogical evaluation indicated that the majority of mine tailings consist of clay-rich rocks, with few associated As-bearing minerals. Scorodite (FeAsO4·2H2O) is observed in the mine tailings pond and appears critical to the As distribution and storage in this surface environment. Using the analysed water chemistry, a modified version of PHREEQC is used to calculate the saturation index of scorodite as a function of pH conditions. The strong variation of the solubility of this mineral with pH and oxidation state highlights potential risks for using scorodite for As fixation and storage. 相似文献
17.
《Applied Geochemistry》2005,20(3):639-659
The oxidation of sulfide minerals from mine wastes results in the release of oxidation products to groundwater and surface water. The abandoned high-sulfide Camp tailings impoundment at Sherridon, Manitoba, wherein the tailings have undergone oxidation for more than 70 a, was investigated by hydrogeological, geochemical, and mineralogical techniques. Mineralogical analysis indicates that the unoxidized tailings contain nearly equal proportions of pyrite and pyrrhotite, which make up to 60 wt% of the total tailings, and which are accompanied by minor amounts of chalcopyrite and sphalerite, and minute amounts of galena and arsenopyrite. Extensive oxidation in the upper 50 cm of the tailings has resulted in extremely high concentrations of dissolved SO4 and metals and As in the tailings pore water (pH < 1, 129,000 mg L−1 Fe, 280,000 mg L−1 SO4, 55,000 mg L−1 Zn, 7200 mg L−1 Al, 1600 mg L−1 Cu, 260 mg L−1 Mn, 110 mg L−1 Co, 97 mg L−1 Cd, 40 mg L−1 As, 15 mg L−1 Ni, 8 mg L−1 Pb, and 3 mg L−1 Cr). The acid released from sulfide oxidation has been extensive enough to deplete carbonate minerals to 6 m depth and to partly deplete Al-silicate minerals to a 1 m depth. Below 1 m, sulfide oxidation has resulted in the formation of a continuous hardpan layer that is >1 m thick. Geochemical modeling and mineralogical analysis indicate that the hardpan layer consists of secondary melanterite, rozenite, gypsum, jarosite, and goethite. The minerals indicated mainly control the dissolved concentrations of SO4, Fe, Ca and K. The highest concentrations of dissolved metals are observed directly above and within the massive hardpan layer. Near the water table at a depth of 4 m, most metals and SO4 sharply decline in concentration. Although dissolved concentrations of metals and SO4 decrease below the water table, these concentrations remain elevated throughout the tailings, with up to 60,600 mg L−1 Fe and 91,600 mg L−1 SO4 observed in the deeper groundwater. During precipitation events, surface seeps develop along the flanks of the impoundment and discharge pore water with a geochemical composition that is similar to the composition of water directly above the hardpan. These results suggest that shallow lateral flow of water from a transient perched water table is resulting in higher contaminant loadings than would be predicted if it were assumed that discharge is derived solely from the deeper primary water table. The abundance of residual sulfide minerals, the depletion of aluminosilicate minerals in the upper meter of the tailings and the presence of a significant mass of residual sulfide minerals in this zone after 70 a of oxidation suggest that sulfide oxidation will continue to release acid, metals, and SO4 to the environment for decades to centuries. 相似文献
18.
Annika Parviainen Matthew B.J. Lindsay Rafael Pérez-López Blair D. Gibson Carol J. Ptacek David W. Blowes Kirsti Loukola-Ruskeeniemi 《Applied Geochemistry》2012
Nearly half a century after mine closure, release of As from the Ylöjärvi Cu–W–As mine tailings in groundwater and surface water run-off was observed. Investigations by scanning electron microscopy (SEM), electron microprobe analysis (EMPA), synchrotron-based micro-X-ray diffraction (μ-XRD), micro-X-ray absorption near edge structure (μ-XANES) and micro-extended X-ray absorption fine structure (μ-EXAFS) spectroscopy, and a sequential extraction procedure were performed to assess As attenuation mechanisms in the vadose zone of this tailings deposit. Results of SEM, EMPA, and sequential extractions indicated that the precipitation of As bearing Fe(III) (oxy)hydroxides (up to 18.4 wt.% As2O5) and Fe(III) arsenates were important secondary controls on As mobility. The μ-XRD, μ-XANES and μ-EXAFS analyses suggested that these phases correspond to poorly crystalline and disordered As-bearing precipitates, including arsenical ferrihydrite, scorodite, kaňkite, and hydrous ferric arsenate (HFA). The pH within 200 cm of the tailings surface averaged 5.7, conditions which favor the precipitation of ferrihydrite. Poorly crystalline Fe(III) arsenates are potentially unstable over time, and their transformation to ferrihydrite, which contributes to As uptake, has potential to increase the As adsorption capacity of the tailings. Arsenic mobility in tailings pore water at the Ylöjärvi mine will depend on continued arsenopyrite oxidation, dissolution or transformation of secondary Fe(III) arsenates, and the As adsorption capacity of Fe(III) (oxy)hydroxides within this tailings deposit. 相似文献
19.
Patricia Acero Carlos Ayora Jesús Carrera Maarten W. Saaltink Sebastiá Olivella 《Applied Geochemistry》2009
Weathering processes affecting pyritic wastes may generate huge amounts of acid waters with high concentrations of potentially toxic contaminants (acid mine drainage). Acid mine drainage is mainly produced in the vadose zone. In the present study, a coupled non-isothermal multiphase flow and reactive transport model of the vadose zone of sulfide mine tailings was developed. The geochemical model included kinetically controlled reactions for Fe(II)-oxidation and for the dissolution of sulfide and aluminosilicate phases and the Pitzer ion-interaction model to describe the behavior of the pore-water solutions. Model results were compared with experimental observations in unsaturated column experiments under strongly evaporative conditions similar to arid or semiarid climates. Evolution trends for temperature, water saturation, evaporation rates, pore-water hydrochemistry and mineral phases observed during the drying experiment were adequately reproduced. The coupled model reproduced the increase of solute concentrations in the column top and the precipitation of a crust of secondary mineral phases. This crust became a barrier for water vapour diffusion to the atmosphere and modified the thermohydraulic behavior of the tailings. Enhanced downward migration of water vapour and its condensation in this colder end of the column were correctly taken into account by the model, which reproduced the dilution observed in the lower part of the column during the experiments. 相似文献