首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The Helvetic nappe system exhibits three-dimensional (3-D) features such as the lateral variation in geometry between the Morcles and Doldenhorn fold nappes or the Rawil depression. We perform 3-D finite element simulations of linear and power-law viscous flow to investigate fold nappe formation during shortening of a half graben with laterally varying thickness. 3-D ellipsoids and corresponding 2-D intersection ellipses are used to quantify finite strain. Fold nappes which formed above a thicker graben have (i) larger amplitudes, (ii) a less sheared and thinned overturned limb, and (iii) a larger thickness than fold nappes formed above a thinner graben. These results agree with observations for the Morcles and Doldenhorn nappes. We also perform 3-D simulations for a tectonic scenario suggested for the evolution of the Rawil depression. The basement is shortened and extended laterally and includes a graben which is oblique to the shortening direction and acts as mechanical weak zone. The graben causes laterally varying basement uplift generating a depression whose amplitude depends on the graben orientation and the stress exponent of basement and sediments. The axial plunge of the depression is smaller (approximately 10°) than the observed plunge (approximately 30°) indicating that additional processes are required to explain the geometry of the Rawil depression.  相似文献   

2.
Foreland-propagating external thrust belts may be considered as essentially plane strain phenomena so that displacements can be correlated throughout their linked, three-dimensional fault geometry. This approach has been applied to part of the northwest external French-Swiss Alps, around the Mont Blanc basement massif. Imbricates of basement and cover sequences on the SW margin of this massif restore to a width in excess of 77 km with an implicit shortening of at least 67 km. These displacements can be correlated with those in the neighbouring Helvetic nappes by transferring movements, via lateral branch lines, onto the Mont Blanc thrust. By reappraising thrust geometries, the Helvetic/Ultrahelvetic nappe complex has been restored to a width of 114 km to the ESE of the Aiguilles Rouges basement massif. Displacements on the internal (SE) margin of the Mont Blanc massif, estimated by balanced sections and a restoration of the Ultrahelvetic klippen in the sub-alps, exceed 59 km. Thrust continuity, incorporating the restorations of nappes and imbricate geometries around the Mont Blanc massif, is illustrated on a crude, restored branch-line map which also serves as a preliminary palaeogeographic reconstruction. External thrust systems, to the east of the external Belledonne/Aiguilles Rouges massif, restore to a width of at least 140 km in the footwall to the Frontal Pennine thrust.  相似文献   

3.
Syn-rift sediments in basins formed along the future southern continental margin of the Jurassic Tethys ocean, comprise, in the eastern Alps of Switzerland, up to 500 m thick carbonate turbidite sequences interbedded with bioturbated marls and limestones. In the fault-bounded troughs no submarine fans developed; in contrast, the fault scarps acted as a line source and the asymmetric geometry as well as the evolution of the basin determined the distribution of redeposited carbonates. The most abundant redeposits are bio- and lithoclastic grainstones and packstones, with sedimentary structures indicating a wide range of transport mechanisms from grain flow to high- and low-density turbidity currents. Huge chaotic megabreccias record catastrophic depositional events. Their main detrital components are Upper Triassic shallow-water carbonates and skeletal debris from nearby submarine highs. After an event of extensional tectonism, sedimentary prisms accumulated in the basins along the faults. Each prism is wedge-shaped with a horizontal upper boundary and consists of a thinning- and fining-upward megacycle. Within each megacycle six facies associations are distinguished. At the base of the fault scarp, an association of breccias was first deposited by submarine rockfall and rockfall avalanches. A narrow, approximately 4000 m wide depression along the fault was subsequently filled by the megabreccia association, in which huge megabreccias interfinger with thin-bedded turbidites and hemipelagic limestones. The thick-bedded turbidite association covered the megabreccias or formed, farther basinward, the base of the sedimentary column. Within the thick-bedded turbidites, thinning- and fining-upward cycles are common. The overlying thin-bedded turbidite association shows nearly no cyclicity and the monotonous sequence of fine-grained calciturbidites covers most of the basin area. With continuous filling and diminishing sediment supply, a basin-plain association developed comprising fine-grained and thin-bedded turbidites intercalated with bioturbated marls and limestones. On the gentle slopes opposite the fault escarpment, redeposited beds are scarce and marl/limestone alternations as well as weakly nodular limestones prevail.  相似文献   

4.
  相似文献   

5.
The Lepontine dome represents a unique region in the arc of the Central and Western Alps, where complex fold structures of upper amphibolite facies grade of the deepest stage of the orogenic belt are exposed in a tectonic half-window. The NW-verging Mont Blanc, Aar und Gotthard basement folds and the Lower Penninic gneiss nappes of the Central Alps were formed by ductile detachment of the upper European crust during its Late Eocene–Early Oligocene SE-directed underthrust below the upper Penninic and Austroalpine thrusts and the Adriatic plate. Four underthrust zones are distinguished in the NW-verging stack of Alpine fold nappes and thrusts: the Canavese, Piemont, Valais and Adula zones. Up to three schistosities S1–S3, folds F1–F3 and a stretching lineation XI with top-to-NW shear indicators were developed in the F1–F3 fold nappes. Spectacular F4 transverse folds, the SW-verging Verzasca, Maggia, Ziccher, Alpe Bosa and Wandfluhhorn anticlines and synclines overprint the Alpine nappe stack. Their formation under amphibolite facies grade was related to late ductile folding of the southern nappe roots during dextral displacement of the Adriatic indenter. The transverse folding F4 was followed since 30 Ma by the pull-apart exhumation and erosion of the Lepontine dome. This occurred coevally with the formation of the dextral ductile Simplon shear zone, the S-verging backfolding F5 and the formation of the southern steep belt. Exhumation continued after 18 Ma with movement on the brittle Rhone-Simplon detachment, accompanied by the N-, NW- and W-directed Helvetic and Dauphiné thrusts. The dextral shear is dated by the 29–25 Ma crustal-derived aplite and pegmatite intrusions in the southern steep belt. The cooling by uplift and erosion of the Tertiary migmatites of the Bellinzona region occurred between 22 and 18 Ma followed by the exhumation of the Toce dome on the brittle Rhone–Simplon fault since 18 Ma.  相似文献   

6.
  相似文献   

7.
Fold-and-thrust belts are prominent structures that occur at the front of compressional orogens. To unravel the tectonic and metamorphic evolution of such complexes, kinematic investigations, quantitative microstructural analysis and geothermometry (calcite–graphite, calcite–dolomite) were performed on carbonate mylonites from thrust faults of the Helvetic nappe stack in Central Switzerland. Paleo-isotherms of peak temperature conditions and cooling stages (fission track) of the nappe pile were reconstructed in a vertical section and linked with the microstructural and kinematic evolution. Mylonitic microstructures suggest that under metamorphic conditions close to peak temperature, strain was highly localized within thrust faults where deformation temperatures spatially continuously increased in both directions, from N to S within each nappe and from top–down in the nappe stack, covering a temperature range of 180–380 °C. Due to the higher metamorphic conditions, thrusting of the lowermost nappe, the Doldenhorn nappe, was accompanied by a much more pronounced nappe internal ductile deformation of carbonaceous rock types than was the case for the overlying Wildhorn- and Gellihorn nappes. Ongoing thrusting brought the Doldenhorn nappe closer to the surface. The associated cooling resulted in a freezing in of the paleo-isotherms of peak metamorphic conditions. Contemporaneous shearing localized in the basal thrust, initially still in the ductile deformation regime and finally as brittle faulting and cataclasis inducing ultimately an inverse metamorphic zonation. With ongoing exhumation and the formation of the Helvetic antiformal nappe stack, a bending of large-scale tectonic structures (thrusts, folds), peak temperature isotherms and cooling isotherms occurred. While this local bending can directly be attributed to active deformation underneath the section investigated up to times of 2–3 ma, a more homogeneous uplift of the entire region is suggested for the very late and still active exhumation stage.  相似文献   

8.
M Persaud  O.A Pfiffner   《Tectonophysics》2004,385(1-4):59-84
Post-glacial tectonic faults in the eastern Swiss Alps occur as single lineaments, clusters of faults or extensive fault zones consisting of several individual faults aligned along the same trend. The orientation of the faults reflects the underlying lithology and the pre-existing structures (joints, pervasive foliations) within these lithologies. Most post-glacially formed faults in the area around Chur, which undergoes active surface uplift of 1.6 mm/year, trend E–W and cut across Alpine and glacial features such as active screes and moraines. Additionally, there are NNW and ENE striking faults reactivating pervasive Alpine foliations and shear zones. Based on a comparison with the nodal planes of recent earthquakes, E–W striking faults are interpreted as active faults. Because of very short rupture lengths and mismatches of fault location with earthquake distribution, magnitude and abundance, the faults are considered to be secondary faults due to earthquake shaking, cumulative deformation in post- or interseismic periods or creep, and not primary earthquake-related faults. The maximum of recent surface uplift rates coincides with the youngest cooling of the rocks according to apatite fission-track data and is therefore a long-lived feature that extends well into pre-glacial times. Isostatic rebound owing to overthickened crust or to melting of glacial overburden cannot explain the observed surface uplift pattern. Rather, the faults, earthquakes and surface uplift patterns suggest that the Alps are deforming under active compression and that the Aar massif basement uplift is still active in response to ongoing collision.  相似文献   

9.
福建省天湖山煤矿区F31推覆断层及找煤方向探讨   总被引：1，自引：0，他引：1  
福建省天湖山煤矿区处于闽西南坳陷东条带,推覆构造极其发育,以F31和F1两条推覆断层表现最为突出。据矿区开采资料证实,F31断层下盘童子岩组为—总体向西倾斜向南倾伏、轴向NNE的紧密线状褶皱,断层较稀少;上盘构造复杂,断层发育,由F31所派生的低序次断层往往为逆掩或逆冲断层,与主断层面组成“入”字型构造,造成童子岩组地层多次重复,同时派生了更低序次的断层组成羽毛状构造。通过对F31推覆断层特征以及应力场分析研究,认为其演进过程为：童子岩期前后的成岩沉积—印支期侧向挤压形成褶皱—印支运动及其后由于侧向挤压形成软弱滑动面及断裂—燕山早期侧向挤压造成低角度推覆断层。根据该矿区构造研究成果,提出了矿区外围及深部的5个找煤方向。  相似文献   

10.
The Helvetic nappes of western Switzerland are discussed as an example of an arcuate foreland fold- and thrust belt in which active fold-axis parallel stretching occurred. Fold-axis parallel extension is recorded by:

1. (1) Incremental strain data from pressure shadow fibres. The significance of pressure shadow fibres for the determination of the deformation history of a region is discussed. Pressure shadows are used to quantify the amount of, and to describe the distribution of fold-axis parallel extension occurring in the Helvetic nappes.

2. (2) The extension directions of conjugate systems of en échelon veins. It is shown that an analysis of the geometry of conjugate vein systems can reveal a regional deformation pattern. The relative age of the conjugate en échelon vein systems in the Helvetic deformation history can be assessed, the geometry of the conjugate sets relative to the local anisotropy plane is described, and the significance of the preferred orientation of their extension directions is discussed.

3. (3) Fold-axis parallel sections. A comparison of the regional distribution of the fold-axis parallel strain with the shape of the Helvetic nappes in fold-axis parallel sections shows that the fold-axis parallel strain cannot be related to the footwall topography of the nappes.

It is concluded that the fold-axis parallel extension in the Helvetic nappes was induced by a change of direction of overthrust shear. This change occurred late in the deformation history and was superposed on the already formed nappes. The changing direction of overthrust shear is the expression of an overall anticlockwise rotation going on in the overthrusting Alpine nappe pile, relative to the European plate, a rotation which lead to the arcuate shape of the Western Alps.  相似文献   


11.
In orogenic systems, thrust faults play a major role in stacking different tectonic units and may act as conduits for the expulsion of large amounts of fluid of different origins (metamorphic, diagenetic, meteoric). This study focuses on the Monte Perdido thrust unit emplaced in the Paleogene Jaca thrust-sheet-top basin, in the SW-central Pyrenees. We aim to decipher the mechanisms and P-T conditions of deformation in fault zones and characterize the related fluid involvement, through combined microstructural, geochemical and microthermometry analyses. Two thrust faults cutting platform limestones, marls and siliciclastic turbidites of the lower part of the basin-fill (Paleocene–lower Eocene) have been studied. The fault zones are characterized by metre-thick shear zones with highly deformed, foliated clay-rich sediments. Foliation is underlined by preferentially oriented phyllosilicates. Several generations of shear and extension calcite, quartz and chlorite-bearing veins attest to fluid-rock interactions during a multi-stage deformation. Microstructural observations and stable isotope analyses on calcite from veins and host sediments suggest that deformation was aseismic and dominated by diffusive mass transfer from pressure solution sites along cleavage and stylolites to the precipitation sites in veins, with mineralizing fluids in equilibrium with the host sediments. Our results suggest an essentially closed hydrologic system, and imply the absence of significant fluid flow along the studied fault zones. Microthermometric study on fluid inclusions present in calcite and quartz veins, and calcite-quartz oxygen isotopic fractionation determined for the first generation shear veins, allow a geothermal gradient of 34 °C/km to be estimated. Analytical results demonstrate an evolution of the fault zones in three stages. The first stage was related to the emplacement of the Monte Perdido thrust unit during the middle Eocene at a temperature of ～208 °C and a burial depth of ～5.7 km. The second stage corresponds to a fault reactivation at a temperature of ～240 °C and a burial depth of ～6.5 km. The latter deformation may have been related to folding of the Monte Perdido thrust unit during the emplacement of the underlying Gavarnie thrust unit during the late Eocene–early Oligocene, with deeper burial resulting from aggradation of the thrust-sheet-top basin-fill. The last event corresponds to the formation of a dilatant vein system likely related to the exhumation of the massif.  相似文献   

12.
Abstract

The Cadomian Dyje Batholith, in the foot–wall of the Variscan Moravian nappe pile, has been involved in Variscan ductile deformation. The Cadomian Brunovistulian rocks were obliquely underthrusted during Carboniferous dextral transpression.

Strain intensity is inversely proportional to the distance from the contact of the Variscan thrust front. The microstructures of deformed granodiorites and quartz–diorites show a characteristic zonality marked by relatively high temperature flow in the west (550–580 °C) characterized by dynamic recrystallization of feldspars and grain boundary migration recrystallization of quartz. The size of quartz grains decreases with decreasing strain towards the east. At the easternmost part of the autochthonous Dyje massif, fracturing of feldspar and subgrain rotation recrystallization of quartz predominate. Flow stress estimates calculated from recrystallized quartz grain size show a regional increase of stress intensity from the highly strained margin towards the less deformed core of the Dyje massif. This microstructural zonation is oblique with respect to the major thrust boundary and corresponds roughly to metamorphic isogrades. The microstructural zonation reflects underthrusting of the Brunovistulian domain below the Moldanubian nappe.

The main ductile tectonic event D1 is followed by a retrogressive brittle–ductile and brittle deformation D2. D2 results in the development of shear zones and faults superimposed on the D1 mylonite fabric. D2 is related to extension oblique to the D1 fabric, associated with detachment and the westward movement of the Moravian nappes. © Elsevier, Paris  相似文献   

13.
阿尔卑斯-喀尔巴阡上白垩统大洋红层特征与对比   总被引：2，自引：0，他引：2  
在前人研究的基础上,从时代、岩性、古生物、沉积速率、沉积环境等方面对阿尔卑斯—喀尔巴阡地区的上白垩统大洋红层进行了详细对比,发现研究区内上白垩统大洋红层最早出露于Cenomanian期,最晚可延续至古近纪,且在Campanian期出露最为广泛,其岩性以灰岩、泥灰岩和含泥灰岩为主,生物化石以浮游有孔虫为主,沉积速率较低且在各地不尽相似,在CCD面上、下均可以出现,沉积环境一般是大陆边缘盆地、斜坡和大洋盆地等远洋、半远洋环境。通过比较分析,为进一步深入研究上白垩统大洋红层提供较为全面的基础资料。  相似文献   

14.
Upper crustal strike-slip duplexes provide an excellent opportunity to address the fundamental question of fault zone development and strain partitioning in an evolving system. Detailed field mapping of the Mesozoic Atacama fault system in the Coastal Cordillera of Northern Chile documents the progressive development of second- and third-order faults forming a duplex at a dilational jog between two overstepping master faults: the sinistral strike-slip, NNW-striking, Jorgillo and Bolfin faults. These are constituted by a meter-wide core of foliated S-C ultracataclasite and cataclasite, flanked by a damage zone of protocataclasite, splay faults and veins. Lateral separation of markers along master faults is on the order of a few kilometers. Second-order, NW-striking, oblique-slip subsidiary fault zones do not show foliated ultracataclasite; lateral sinistral separations are in the range of  10 to 200 m with a relatively minor normal dip-slip component. In turn, third-order, east–west striking normal faults exhibit centimetric displacement. Oblique-slip (sinistral–normal) fault zones located at the southern termination of the Bolfin fault form a well-developed imbricate fan structure. They exhibit a relatively simple architecture of extensional and extensional-shear fractures bound by low displacement shear fractures. Kinematic analysis of fault slip data from mesoscopic faults within the duplex area, document that the NW-striking and the EW-striking faults accommodate transtension and extension, respectively. Examination of master and subsidiary faults of the duplex indicates a strong correlation between total displacement and internal fault structure. Faults started from arrays of en echelon extensional/extensional-shear fractures that then coalesced into throughgoing strike-slip faults. Further displacement leads to the formation of discrete bands of cataclasite and ultracataclasite that take up a significant part of the total displacement. We interpret that the duplex formed by progressive linkage of horsetail-like structures at the southern tip of the Bolfin fault that joined splay faults coming from the Jorgillo and Coloso faults. The geometry and kinematics of faults is compared with that observed in analog models to gain an insight into the kinematic processes leading to complex strike-slip fault zones in the upper crust.  相似文献   

15.
The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping  相似文献   

16.
The Helvetic nappes in Switzerland consist of sediments, which have been sheared off and thrust over the crystalline basement of the European passive continental margin during Alpine orogeny. Their basal shear zones usually root above the external crystalline massifs. However, the mechanisms that initiated the shear zones and the associated nappe formation are still debated. We perform two-dimensional numerical simulations of the shearing of linear viscous fluids above a linear viscous fluid with considerably higher viscosity (quasi-undeformable). The boundary between the fluid, mimicking the sediments, and the quasi-undeformable fluid, mimicking the basement, exhibits geometrical perturbations, mimicking half-grabens. These geometrical perturbations can trigger significant strain localization and the formation of shear zones within the linear viscous fluid although no rheological softening mechanism is active. This kinematic, ductile strain localization is caused by the half-grabens and the viscosity ratio between basement and sediments. The viscosity ratio has a strong control on the kinematics of strain localization, whereas the depth of the half-grabens has a weak control. For sediment viscosities in the order of 1021 Pas and typical half-graben geometries of 5 km depth and 25 km width the localization generates (a) low-angle shear zones at the basement-sediment interface, but also entirely within the sediments, (b) horizontal transport >10 km associated with the shear zones, (c) shear zones with thickness in the order of 100 m, (d) an ordered stacking of model nappes and (e) shear zones that root above the basement. The results suggest that tectonic inheritance in the form of half-grabens and associated kinematic strain localization could have been the triggering mechanism for Helvetic nappe formation, and not rheological softening mechanisms, which might, however, have subsequently further intensified shear localization significantly.  相似文献   

17.
The origin of an apparently syndeformational chemical remanent magnetization (CRM) and geochemical alteration in a fault zone in the Bristol Channel Basin, southwest England, was investigated. Deformation in the fault zone occurs in Jurassic aged, organic-rich limestones and consists of numerous normal and oblique-slip faults and associated folds. Migration of basinal, radiogenic fluids is indicated by elevated 87Sr/86Sr values for calcite veins that occur throughout the fault zone. Some of the calcite veins contain hydrocarbons sourced from deeper strata. Elevated 87Sr/86Sr values in the host Jurassic limestones indicate that they were also extensively altered by radiogenic fluids that migrated through microfractures in addition to major fault and fracture planes. Folded and tilted host limestones contain a pervasive secondary CRM residing in magnetite that was acquired during deformation in the Tertiary. The association between this pervasive CRM and the pervasive geochemical alteration is consistent with a genetic connection between the orogenic fluids and the CRM although the timing of CRM acquisition (Tertiary) is not consistent with structural interpretations for the timing of most veining. An alternative remagnetization mechanism which is not triggered by externally derived fluids, such as diagenesis of hydrocarbons, might account for the CRM. Hydrocarbon-bearing veins also contain a CRM that resides in magnetite, although the time for remanence acquisition is not well constrained by field tests. © 1998 John Wiley & Sons, Ltd.  相似文献   

18.
The Austroalpine nappe systems in SE-Switzerland and N-Italy preserve remnants of the Adriatic rifted margin. Based on new maps and cross-sections, we suggest that the complex structure of the Campo, Grosina/Languard, and Bernina nappes is inherited largely from Jurassic rifting. We propose a classification of the Austroalpine domain into Upper, Middle and Lower Austroalpine nappes that is new because it is based primarily on the rift-related Jurassic structure and paleogeography of these nappes. Based on the Alpine structures and pre-Alpine, rift-related geometry of the Lower (Bernina) and Middle (Campo, Grosina/Languard) Austroalpine nappes, we restore these nappes to their original positions along the former margin, as a means of understanding the formation and emplacement of the nappes during initial reactivation of the Alpine Tethyan margin. The Campo and Grosina/Languard nappes can be interpreted as remnants of a former necking zone that comprised pre-rift upper and middle crust. These nappes were juxtaposed with the Mesozoic cover of the Bernina nappe during Jurassic rifting. We find evidence for low-angle detachment faults and extensional allochthons in the Bernina nappe similar to those previously described in the Err nappe and explain their role during subsequent reactivation. Our observations reveal a strong control of rift-related structures during the subsequent Alpine reactivation on all scales of the former distal margin. Two zones of intense deformation, referred to as the Albula-Zebru and Lunghin-Mortirolo movement zones, have been reactivated during Alpine deformation and cannot be described as simple monophase faults or shear zones. We propose a tectonic model for the Austroalpine nappe systems that link inherited, rift-related structures with present-day Alpine structures. In conclusion, we believe that apart from the direct regional implications, the results of this paper are of general interest in understanding the control of rift structures during reactivation of distal-rifted margins.  相似文献   

19.
Abstract

The Mamora area (Morocco) is located in the northern part of the Meseta and the southern part of Rharb. The recent formations (Mesozoic to Quaternary) lie unconformably on a Paleozoic basement. This study based on hydrogeological, sedimentological, drilling data and seismic reflection profiles interpretation, proposes new interpretations of geodynamical evolution of this area particularly in terms of tectonic patterns. The most ancient formations recognized in this region are Paleozoic schists and quartzites in the Tifíete sector. They represent the basement of the basin on which Triassic conglomerates and red mudstones associated with basalts lie unconformably. Jurassic and Cretaceous sediments are limestones and marls. The Mio-pliocene formations are open marine blue marls. Plio-quaternary sediments are limestones and sands containing gravel and pebbles. Miocene to Pliocene blue marls facies corresponds to deep marine marls (bathyal as indicated by planctonic foraminifers) with an attributed age from upper Miocene [9] to middle Pliocene [7]. A facies distribution map of the top of the blue marls has been realized where four main facies—conglomerate, shelly sandstone, limestone and marls—indicate a major regression in the Mamora basin. The datation of the formations was mostly realized by Wernli [22, 23, 24, 25], and Cirac [10], In the Mamora area, Hercynian faults show two main structural directions, N020°E-N040°E (Agadir-Rabat), N120°E (Rabat- Tiflète) [5], and a new major Hercynian fault (K2S). The seismic profiles have been studied between Sidi Slimane and Sidi Yahia area, to illustrate the structure of the Mamora, and to replace it, in the geodynamical evolution. The seismic reflection lines and drilling data show that the eastern Mamora was subdivided into two sectors: i) the southern sector is affected by Hercynian faults which create horsts and grabens in the Paleozoic. Mio-Pliocene formations infill these depressions and are covered by Quaternary sediments; ii) the northern sector is constituted by various formations: 1. Paleozoic formation as basement covered by autochthonous Mesozoic to Miocene, 2. Prerifain nappes (marls and evaporites), 3. Mio-Plio-Pleistocene formations as subautochthonous to autochthonous. These two sectors are separated by a major fault (K2S). On the other hand, in the occidental Mamora, the facies distribution and the Plio-Pleistocene thickening seem to be induced by faults with a NE-SW and NW-SE trends which affect the Paleozoic basement. Then, between the Meseta domain and the septentrional Rharb basin, two major Hercynian initially dextral shear zones, Rabat- Tiflete and K2S, have been recognised. During the Atlantic Ocean opening, they are probably senestral shear zones. At the same time the subsidence in Rharb basin is active, major action of these faults is normal. Therefore, Mamora represents a real hinge between stable Meseta and unstable septentrional Rharb basin. © 2001 Éditions scientifiques et médicales Elsevier SAS  相似文献   

20.
《Geodinamica Acta》2001,14(6):361-372
The Mamora  area (Morocco) is located in the northern part of the Meseta and the southern part of Rharb. The recent formations (Mesozoic to Quaternary) lie unconformably on a Paleozoic basement. This study based on hydrogeological, sedimentological, drilling data and seismic reflection profiles interpretation, proposes new interpretations of geodynamical evolution of this area particularly in terms of tectonic patterns. The most ancient formations recognized in this region are Paleozoic schists and quartzites in the Tiflete sector. They represent the basement of the basin on which Triassic conglomerates and red mudstones associated with basalts lie unconformably. Jurassic and Cretaceous sediments are limestones and marls. The Mio-pliocene formations are open marine blue marls. Plio-quaternary sediments are limestones and sands containing gravel and pebbles. Miocene to Pliocene blue marls facies corresponds to deep marine marls (bathyal as indicated by planctonic foraminifers) with an attributed age from upper Miocene 〚9〛 to middle Pliocene 〚7〛. A facies distribution map of the top of the blue marls has been realized where four main facies - conglomerate, shelly sandstone, limestone and marls - indicate a major regression in the Mamora basin. The datation of the formations was mostly realized by Wernli 〚22〛, 〚23〛, 〚24〛, 〚25〛, and Cirac 〚10〛. In the Mamora area, Hercynian faults show two main structural directions, N020°E-N040°E (Agadir-Rabat), N120°E (Rabat-Tiflète) 〚5〛, and a new major Hercynian fault (K2S). The seismic profiles have been studied between Sidi Slimane and Sidi Yahia area, to illustrate the structure of the Mamora, and to replace it, in the geodynamical evolution. The seismic reflection lines and drilling data show that the eastern Mamora was subdivided into two sectors : i) the southern sector is affected by Hercynian faults which create horsts and grabens in the Paleozoic. Mio-Pliocene formations infill these depressions and are covered by Quaternary sediments ; ii) the northern sector is constituted by various formations : 1. Paleozoic formation as basement covered by autochthonous Mesozoic to Miocene, 2. Prerifain nappes (marls and evaporites), 3. Mio-Plio-Pleistocene formations as subautochthonous to autochthonous. These two sectors are separated by a major fault (K2S). On the other hand, in the occidental Mamora, the facies distribution and the Plio-Pleistocene thickening seem to be induced by faults with a NE-SW and NW-SE trends which affect the Paleozoic basement. Then, between the Meseta domain and the septentrional Rharb basin, two major Hercynian initially dextral shear zones, Rabat-Tiflete and K2S, have been recognised. During the Atlantic Ocean opening, they are probably senestral shear zones. At the same time the subsidence in Rharb basin is active, major action of these faults is normal. Therefore, Mamora represents a real hinge between stable Meseta and unstable septentrional Rharb basin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号