共查询到20条相似文献，搜索用时 203 毫秒
1.
利用中、小容量气枪组成的立体气枪阵列延迟激发震源和海底地震仪(OBS)在我国北部浅海海域开展了人工地震深部地球物理探测试验.基于水深条件和压制水体虚反射、提升低频能量的需要,使气枪震源有足够的输出能量和高品质子波特性,研究了立体气枪阵列延迟激发震源工作机理,经远场子波理论模拟优选了组合参数并进行了海上试验工作.结果表明,中、小容量气枪组成的立体气枪阵列延迟激发震源,适应了浅水海域的激发环境,降低了由虚反射造成的局部陷波和干扰作用,有效地改善了OBS信号的品质,获得了Ps,Pg,PmP,Pn等多种震相.创新了由中、小容量气枪组成的立体气枪阵列延迟激发震源在浅海区OBS探测中的应用,也填补了南黄海海域深地震探测数据的空白,为南黄海、渤海深部地壳结构研究及含油气盆地形成演化研究提供了重要的基础资料. 相似文献
2.
KIM BAK OLSEN 《Geophysical Prospecting》1989,37(5):455-465
Multiple coverage reflection seismic data provide an important source of information concerning the subsurface. However, due to the stacking and migration techniques used in the processing, the first arrivals are muted and details about the upper part of the sections are generally lost. This paper describes a computerized method for the inverse modelling of laterally varying velocities and shallow depths which are not sufficiently resolved in the reflection seismic processing. The method minimizes, in a least-squares manner, the difference between the observed first arrivals, picked from the reflection traces, and a set of synthetic traveltimes, calculated by ray tracing in a cell model. An initial model, e.g. from a priori knowledge or the application of a conventional interpretation method, is refined iteratively until no further essential improvement can be achieved. Traditional first-arrival inversion methods cannot, in general, provide such flexible modelling. The technique is successfully tested on synthetic data as well as on first arrivals picked automatically from the records of a reflection seismic survey in North Jutland, Denmark. 相似文献
3.
Use of low frequencies for sub-basalt imaging 总被引：5，自引：1，他引：5
Anton Ziolkowski Peter Hanssen Robert Gatliff Helmut Jakubowicz rew Dobson Gary Hampson Xiang-Yang Li Enru Liu 《Geophysical Prospecting》2003,51(3):169-182
Many prospective passive ocean margins are covered by large areas of basalts. These basalts are often extremely heterogeneous and scatter the seismic energy of the conventional seismic reflection system so that it becomes difficult to obtain information on deeper reflectors. Since high frequencies are scattered more than low frequencies, we argue that the acquisition system for sub-basalt targets should be modified to emphasize the low frequencies, using much larger airguns, and towing the source and receivers at about 20 m depth. In the summer of 2001 we obtained seismic reflection data over basalt in the northeast Atlantic using a system modified to enhance the low-frequency energy. These new data show deep reflections that are not visible on lines shot in the same places with a conventional system. 相似文献
4.
一、厚砾石区的地震地質条件在我国、苏联以及其他国家的大量勘探实践說明,厚砾石地区有极为复杂和不利的地震地貭条件,具有屏障某些深层地貭因素的影响,其不利的激发和接收条件主要是由以下几个因素所引起。 相似文献
5.
被动源面波和体波成像在内蒙古浅覆盖区勘探应用 总被引：1，自引：0，他引：1
地震勘探具有勘探深度和分辨率的优势,在矿产勘探中多被采用.但主动源反射地震具有成本高、在矿区采集困难等难题,限制了其广泛应用.无需主动源激发、利用天然噪声的被动源地震应用于勘探,可成为其低成本替代选项.本文在内蒙古浅覆盖区矿区进行了被动源勘探试验,采用相关计算获得拟炮集记录,并基于频率域信噪比计算,在生成拟炮集前实现了面波和体波甄选,分离了面波和体波.应用面波反演的横波速剖面识别了覆盖层厚度.体波数据经反射波常规处理,获得了成像剖面.经与主动源反射剖面对比,主要结构的反射特征呈现了良好的一致性.本文试验验证了被动源勘探在内蒙浅覆盖区具有良好应用前景,为低成本的面积性勘探实施提供了新的选择. 相似文献
6.
深反射地震是了解深部地质结构的主要手段,获取高品质的数据是给出合理地质解释的基础.在结晶岩地区,由于地层成层性差、非均质性严重,地震散射效应明显,导致地震波场复杂,同时结晶岩为非理想弹性体,不利于地震波能量转换,有效反射能量弱,信噪比低.加之深反射地震的目标层较深且受环境噪声干扰严重,高频信号衰减快,地震资料主频较低.这些因素使得在结晶岩区难以获得高品质的地震资料,为探索提高该类地区深反射地震资料质量的方法和技术,本文依托长江中下游成矿带2009—2014年深反射地震数据采集工作,在精细设计、严格施工的基础上,从激发和接收入手,开展了"轴向不耦合激发"、"宽频接收"和"宽线观测"等技术方法试验研究.结果表明,这些方法技术措施提高了下传弹性波能量,展宽了接收地震信号的频带,提高了覆盖次数和信噪比,有效改善了地震原始资料的品质和成像效果.研究结果对今后结晶岩地区深地震反射数据采集工作具有重要的实用价值和参考意义. 相似文献
7.
8.
Mini-sosie consists in using a vibration-rammer as seismic source and changing the striking rate by varying the engine speed, resulting in a random impulse transmission. The recording instruments are made up of two seismic traces, two constant gain amplifiers and a two-channel sosie processor which performs the decoding in real time by using the actual transmission times supplied by a captor located on top of the vibration-rammer's plate. An idea of the possible penetration is given by the recording of a velocity survey. Other results obtained in seismic reflection and refraction are given. 相似文献
9.
地震干涉是近几年勘探地球物理领域研究的一个热点方向,它是波场重构的有力工具.然而,地震干涉往往引入虚假同相轴,影响波场重构的质量.为进一步分析虚假同相轴产生的原因并改善波场重构的质量,本文基于稳相分析,详细探讨子波主频、激发炮数、检波器埋深、检波器间距和地层倾角五个因素对波场重构的影响.模型结果表明,震检排列方式和地层倾角等因素通过改变有限震检范围内稳相点的位置来影响波场重构的质量.将垂直地震剖面VSP中的下行直达波与下行反射波进行地震干涉处理,可有效重构来自高陡反射面的下行反射波,将传统的VSP转化为单井地震剖面SWP.直接利用重构SWP波场进行成像,不仅扩大传统VSP的成像范围,而且避免常规勘探面临的静校正和近地表速度建模问题,为高陡构造成像提供一种新方法. 相似文献
10.
B Damotte 《Journal of Applied Geophysics》1993,29(3-4)
The French Ecors program was launched in 1983 by a cooperation agreement between universities and petroleum companies. Crustal surveys have tried to find explanations for the formation of geological features, such as rifts, mountains ranges or subsidence in sedimentary basins. Several seismic surveys were carried out, some across areas with complex geological structures. The seismic techniques and equipment used were those developed by petroleum geophysicists, adapted to the depth aimed at (30–50 km) and to various physical constraints encountered in the field. In France, Ecors has recorded 850 km of deep seismic lines onshore across plains and mountains, on various kinds of geological formations. Different variations of the seismic method (reflection, refraction, long-offset seismic) were used, often simultaneously. Multiple coverage profiling constitutes the essential part of this data acquisition. Vibrators and dynamite shots were employed with a spread generally 15 km long, but sometimes 100 km long.Some typical seismic examples show that obtaining crustal reflections essentialy depends on two factors: (1) the type and structure of shallow formations, and (2) the sources used. Thus, when seismic energy is strongly absorbed across the first kilometers in shallow formations, or when these formations are highly structured, standard multiple-coverage profiling is not able to provide results beyond a few seconds. In this case, it is recommended to simultaneously carry out long-offset seismic in low multiple coverage.Other more methodological examples show: how the impact on the crust of a surface fault may be evaluated according to the seismic method implemented (vibroseis 96-fold coverage or single dynamite shot); that vibrators make it possible to implement wide-angle seismic surveying with an offset 80 km long; how to implement the seismic reflection method on complex formations in high mountains.All data were processed using industrial seismic software, which was not always appropriate for records at least 20 s long. Therefore, a specific procedure adapted to deep seismic surveys was developed for several processing steps. The long duration of the vibroseis sweeps often makes it impossible to perform correlation and stack in the recording truck in the field. Such field records were first preprocessed, in order to be later correlated and stacked in the processing center. Because of the long duration of the recordings and the great length of the spread, several types of final sections were replayed, such as: (1) detailed surface sections (0–5 s), (2) entire sections (0–20 s) after data compression, (3) near-trace sections and far-trace sections, which often yield complementary information.Standard methods of reflection migration gave unsatisfactory results. Velocities in depth are inaccurate, the many diffractions do not all come from the vertical plane of the line, and the migration software is poorly adapted to deep crustal reflections. Therefore, migration is often performed graphically from arrivals picked in the time section. Some line-drawings of various onshore lines, especially those across the Alps and the Pyrenees, enable to judge the results obtained by Ecors. 相似文献
11.
Sensitivity analysis and application of time‐lapse full‐waveform inversion: synthetic testing and field data example from the North Sea,Norway 
下载免费PDF全文
下载免费PDF全文 Time‐lapse refraction can provide complementary seismic solutions for monitoring subtle subsurface changes that are challenging for conventional P‐wave reflection methods. The utilization of refraction time lapse has lagged behind in the past partly due to the lack of robust techniques that allow extracting easy‐to‐interpret reservoir information. However, with the recent emergence of the full‐waveform inversion technique as a more standard tool, we find it to be a promising platform for incorporating head waves and diving waves into the time‐lapse framework. Here we investigate the sensitivity of 2D acoustic, time‐domain, full‐waveform inversion for monitoring a shallow, weak velocity change (?30 m/s, or ?1.6%). The sensitivity tests are designed to address questions related to the feasibility and accuracy of full‐waveform inversion results for monitoring the field case of an underground gas blowout that occurred in the North Sea. The blowout caused the gas to migrate both vertically and horizontally into several shallow sand layers. Some of the shallow gas anomalies were not clearly detected by conventional 4D reflection methods (i.e., time shifts and amplitude difference) due to low 4D signal‐to‐noise ratio and weak velocity change. On the other hand, full‐waveform inversion sensitivity analysis showed that it is possible to detect the weak velocity change with the non‐optimal seismic input. Detectability was qualitative with variable degrees of accuracy depending on different inversion parameters. We inverted, the real 2D seismic data from the North Sea with a greater emphasis on refracted and diving waves’ energy (i.e., most of the reflected energy was removed for the shallow zone of interest after removing traces with offset less than 300 m). The full‐waveform inversion results provided more superior detectability compared with the conventional 4D stacked reflection difference method for a weak shallow gas anomaly (320 m deep). 相似文献
12.
A combined reflection/refraction (wide-angle) seismic survey was conducted on the continental shelf north-west of Britain, using a conventional streamer with an airgun source, and static ocean-bottom seismometers (OBS) to record wide-angle energy. The shallow structure down to a basaltic layer was reasonably well imaged on the stacked reflection section. The basalts, however, proved to be opaque to the conventional reflection method and prevented the imaging of deeper horizons, where an important velocity inversion was anticipated. This paper reports on the processing, modelling and interpretation of the densely sampled wide-angle OBS data that were coincident with the reflection profile. Eleven OBS instruments were deployed along a 75 km line and recorded signal from a powerful 149 litre (9100 in.3) airgun array fired every 50 m. Data processing was performed using a standard industrial reflection seismic software package prior to first-arrival picking. Processing steps included geometry definition, trace summation and display of the data using various scaling algorithms. An initial model was constructed from 1D velocity-time profiles digitized every 4 km along the stacked section. First arrival traveltime modelling rapidly converged to a detailed model of the structure of the top 5 km of the crust. Modelling revealed the existence of a buried low-velocity Mesozoic sedimentary basin, of a prominent basement horst and of a normal fault penetrating to the basement. 相似文献
13.
介绍了井间地震数据采集方面取得的最新进展．为了使我国井间地震技术实用化,开展了大井间距井间地震数据采集试验．通过地面浅井激发深井接收、深井激发深井接收、不同炸药量、不同传播距离试验,确定了井间地震观测参数．应用改进后的井中安全炸药震源、一个三分量井中检波器和常规数据记录系统,在陕北顺宁油田的顺3井、顺4井和顺5井3口生产井中成功采集到两对大井间距、深井、油井中的井间地震资料,两对井的井距分别为307．92m和470．36m,采集井段为904．31-1272．32m．共设计了4种观测方式,采集到800多炮井间地震记录,对油井无损害．改进型井中安全炸药震源在使用效率和寿命方面有显著提高,可用于商业性并间地震数据采集． 相似文献
14.
海洋油气勘探尤其是深水勘探面临着三高难题——高成本、高风险、高技术.如何对储层进行准确预测,是地球物理工作者及地球物理技术亟待解决的问题.本文对火山机构喷发机理及其地球物理特征进行分析,结合邻近工区在火山发育特征规律的认识成果,针对南中国海深水区目标区内典型火山发育,运用常规地震时间切片、剖面分析及沿层均方根振幅属性和沿层小时窗三维地震镂空显示等技术,分析了目标火山发育情况、火山岩喷溢情况、地震反射特征及岩相分布,并建立了该类型火山发育特征、岩相分布规律以及空间展布规律及变化特征的认识.本文的研究成果为该地区准确识别火山发育及预测其分布规律提供了参考,尤其是在钻井少的情况下进行地质异体常识别和储层预测,有利于该地区石油天然气勘探工作以及区域地质认识. 相似文献
15.
在深反射地震资料处理中,当来自深部的有效弱信号和噪声干扰频带差异较小且难以区分时,传统滤波方法的应用会受到限制.谱分解方法是一种使用离散傅里叶变换,基于信号的频率-振幅谱等信息生成高分辨率地震图像的方法,通常用来识别介质物性横向分布特征,处理复杂介质内频谱变化和局部相位的不稳定性等问题,包括定位复杂断层和小尺度断裂等.S变换作为一种新的时频分析方法,具有自动调节分辨率的能力,近些年来被广泛应用到勘探地震、大地电磁等数据处理中,逐渐成为地球物理方法中噪声压制的有效方法之一.与常规石油反射地震资料相比,深反射主动源地震为了探测深部结构信息,常采用大药量激发方式、长排列观测系统等,导致深部有效信号基本湮灭在噪声干扰之中.针对深反射数据特点,本文结合谱分解和S变换技术,首先设计了简单的脉冲函数实验数据,证实S变换方法的有效性,同时说明谱分解方法的效果受所用时频分析方法影响较大,而其中决定分辨能力的变换窗函数的选取尤为重要.在此基础上,分别应用到深反射地震资料的单道和叠加剖面实际数据上,对比分析了传统变换谱分解和S变换谱分解的应用效果,单道资料对比结果表明:相比传统谱分解,S变换谱分解方法具有自动调节分辨率的能力,能够精确的标定深反射地震资料中弱信号不同时刻的频率分量;叠加剖面资料应用结果表明:由S变换谱分解得到的剖面结果与其他谱分解方法结果整体上具有较高的一致性,同时清晰地刻画出原叠加剖面上被噪声湮灭的低频细节特征,提高了剖面的分辨率及同相轴连续性;对比结果明显看出,Gabor变换谱分解方法得到的结果同相轴较为破碎,分析原因认为这是由Gabor变换的时频分解方法的定长窗函数所致,窗口大小不会随着信号频率的变化来调节长度,只能在处理的过程中根据一定的记录长度范围选取窗函数参数,而S变换谱分解方法在窗函数的选取时,通过时变信号的局部频率特征自动调节窗口长度,能够更好的刻画各个频段的细节特征,在深反射剖面成像应用中效果尤为明显.本文结果表明S变换谱分解技术在深地震叠加剖面上的应用有效地提高了来自深部弱反射信号的信噪比和分辨率,并刻画出了叠加剖面上所不具有的低频细节特征,在实际深反射地震资料处理中能有效保护低频弱信号获得更好的成像效果.本文为深地震反射资料中弱信号的保护处理找到一种有效的方法. 相似文献
16.
地球深部结构研究是地震预报和地球动力学研究的基础,传统人工地震受到探测深度、分辨率或震源能量的环保限制,探索利用小能量震源进行深部高分辨率探测技术具有重要意义.本文借鉴雷达探测中的编码原理,开展了震源编码探测实验,利用人工震源向地下发送具有独特特征的随机编码序列脉冲,作为一次等效激发,利用准确记录的编码震源的源函数与地震连续观测的互相关进行“解码”分析,获取地下信息,形成编码地震探测技术.实验表明编码地震能够大幅度提高地震探测能力,利用小能量震源获得远距离的探测和高分辨率,是一种具有重要发展前景的人工探测技术. 相似文献
17.
受井中检波器串级数局限,垂直地震剖面(VSP)反射波成像范围窄,且不能对井中最浅接收点上方区域有效成像.虽然多次波成像能扩大成像范围,但在实际应用中尚有诸多困难和挑战.本文根据Wapenaar的地震干涉理论,基于上下行波场分离技术,研发了VSP地震干涉成像方法.该方法将VSP自由表面多次波重建为在地表震源位置激发(虚震源)接收的拟地面地震反射波,然后偏移成像,以达到对多次波间接成像的目的.通过数值模型实验,测试了VSP干涉成像的极限分辨率,并讨论了主要采集参数的影响,结果表明:该方法的垂向和水平极限分辨率分别达约10m和20m,且能分辨深度达6500m处的50m×100m溶洞;采用12至24道井中检波器串采集的VSP资料,其干涉成像结果显著优于VSP反射波成像,与相应的地面地震成像效果相当.将本文方法应用于新疆地区采集的VSP资料,结果表明:与VSP反射波成像相比,成像同相轴更加连续,成像范围显著扩大;与地面地震成像相比,成像结果相当,尤其在浅中部甚至更好.新方法不仅无需进行井中接收点静校正,且能显著增大成像范围,有利于成像同相轴的追踪对比、地震属性提取和地质解释,尤其对中国新疆地区深部缝洞型储层的成像,具有广泛的实际应用前景. 相似文献
18.
《Journal of Applied Geophysics》2001,46(1):31-44
During two Antarctic summers (1996–1997 and 1997–1998), five seismic refraction and two reflection profiles were acquired on the Johnsons Glacier (Livingston Island, Antarctica) in order to obtain information about the structure of the ice, characteristics of the ice-bed contact and basement topography. An innovative technique has been used for the acquisition of reflection data to optimise the field survey schedule. Different shallow seismic sources were used during each field season: Seismic Impulse Source System (SISSY) for the first field survey and low-energy explosives (pyrotechnic noisemakers) during the second one. A comparison between these two shallow seismic sources has been performed, showing that the use of the explosives is a better seismic source in this ice environment. This is one of the first studies where this type of source has been used. The analysis of seismic data corresponding to one of the reflection profiles (L3) allows us to delineate sectors with different glacier structure (accumulation and ablation zones) without using glaciological data. Moreover, vertical discontinuities were detected by the presence of back-scattered energy and the abrupt change in frequency content of first arrivals shown in shot records. After the raw data analysis, standard processing led us to a clear seismic image of the underlying bed topography, which can be correlated with the ice flow velocity anomalies. The information obtained from seismic data on the internal structure of the glacier, location of fracture zones and the topography of the ice-bed interface constrains the glacial dynamics of Johnsons Glacier. 相似文献
19.
开发导致的时移地震差异代表了油藏的岩石物理性质变化,本文从差异波形角度出发,明确了声波阻抗界面的反射系数与油层声波阻抗变化之间的函数关系,进而分析薄油层时移地震差异波形特征.通过分析得出,开发前后油层阻抗变化越大,时移地震的差异振幅幅度越大;薄油层的差异波形特征仅与油层的声波阻抗变化有关,油层声波阻抗增大导致与地震子波微分形式相同的差异波形,油层声波阻抗减小产生的差异波形与180°相位的地震子波微分形式相同;油层声波阻抗变化方向导致差异波形振幅幅度变化的快慢. 相似文献