共查询到20条相似文献，搜索用时 52 毫秒
1.
提出了基于响应面法的边坡稳定二阶可靠度分析的实用算法。选择U空间中的随机变量,通过空间变换和相关矩阵分解,计算试验点的功能函数;通过迭代算法构造响应面、以确保通过最小的计算量获得最优精度,并在此基础上进行FORM/SORM计算。以一岩石边坡的平面滑动问题为例,通过与蒙特卡洛模拟、FORM及随机响应面法的比较,证明了该方法的准确性和高效性。分析了参数的相关性及试验点取值范围对计算结果的影响,讨论了可靠度分析结果中参数敏感性和物理属性问题。该方法可为实际边坡问题的可靠度分析提供参考,并可以用来进行基于可靠度分析的加固设计。 相似文献
2.
基于认知聚类分区方法的边坡可靠度分析 总被引：1，自引：0，他引：1
提出了边坡可靠度分析的一种新的全局优化方法--认知聚类分区方法。该方法主要包括5个步骤：分区、随机抽样、计算极径L、回代、计算可靠指标及验算点。给出了相应的计算流程图,并编写了基于C语言的计算程序KCPREL。最后,以岩质边坡稳定可靠度问题为例证明了所提方法的有效性。结果表明,认知聚类分区方法能同时计算出可靠指标和验算点,并能获得全局最优解。该方法的计算精度和蒙特卡洛模拟方法相当,计算效率远远高于传统的蒙特卡洛模拟方法。此外,该方法在分析含有复杂的隐式及非线性功能函数的边坡稳定可靠度问题方面体现出明显的优越性。等步长认知聚类分区方法能全面且均匀地搜索角度,从而得到更准确的验算点。为了保证足够的计算精度及减小计算量,建议步长取10º以内。 相似文献
3.
Reliability analysis of serviceability performance for an underground cavern using a non-intrusive stochastic method 总被引：1，自引：0，他引：1
Dian-Qing Li Shui-Hua Jiang Yi-Feng Chen Chuang-Bing Zhou 《Environmental Earth Sciences》2014,71(3):1169-1182
This paper proposes a non-intrusive stochastic analysis procedure for reliability analysis of the serviceability performance of an underground cavern with an implicit limit state function. This procedure is formulated on the basis of the stochastic response surface method (SRSM) and the deterministic finite element method. First, the SRSM is briefly introduced and implemented through a MATLAB code. Then, the software SIGMA/W is used to perform a deterministic finite element analysis. Next, a link between the MATLAB code and SIGMA/W is developed to automatically pass exchange data between the two platforms. Finally, two examples are presented to illustrate the capacity and validity of the proposed procedure. In the first example, a closed-form limit state function is adopted to validate the SRSM by comparing it with the results obtained from a direct Monte Carlo simulation. In the second example, the serviceability performance of an underground cavern is analyzed to illustrate the capacity of the proposed procedure to handle a reliability problem with an implicit limit state function. The proposed procedure does not require the user to modify the existing deterministic finite element code. The deterministic finite element analysis and the probabilistic analysis are decoupled. This is a major practical advantage because realistic probabilistic analyses are made possible. The SRSM can produce sufficiently accurate reliability results. Furthermore, the method is much more efficient than the direct Monte Carlo simulation. Sensitivity analyses show the effect of the variability of input random variables and the correlation between them on: (1) the probability density functions, (2) the first four order statistical moments, and (3) the probability of failure, which is investigated and discussed. 相似文献
4.
提出了基于支持向量机（SVM）的边坡可靠度分析新算法。该方法采用均匀设计确定样本点,通过一定数量的确定性计算来训练SVM,拟合边坡的功能函数;采用一阶可靠度方法（FORM）和迭代算法优化SVM模型,获得可靠度指标和验算点信息;在SVM模型基础上进一步通过二阶可靠度方法（SORM）和蒙特卡罗模拟（MCS）计算边坡的失稳概率。以两个典型边坡为例,通过与其他方法比较,证明了该方法的准确性和高效性。结果表明：提出的在标准正态空间（U空间）中取样并构建SVM,在原始空间（X空间）中计算功能函数的算法,有效地解决了具有相关非正态分布变量的可靠度分析问题,并且可很容易扩展到SORM的计算。算例结果证明,该方法的精度高于FORM;而效率优于MCS。分析过程中,边坡安全系数计算和可靠度分析相互独立。因此,该方法既适用于具有显式功能函数的简单问题,也适用于需要软件计算安全系数的实际边坡问题。 相似文献
5.
提出基于非侵入式随机有限元法的边坡可靠度分析方法,并编写计算程序NISFEM。采用有限元滑面应力法计算边坡安全系数,将Hermite随机多项式展开与SIGMA/W和SLOPE/W模块有机结合实现边坡可靠度非侵入式随机分析。根据随机多项式展开系数,给出边坡安全系数前4阶统计矩（均值、标准差、偏度和峰度）和Sobol指标解析表达式,并采用Sobol指标进行边坡可靠度参数敏感性分析。最后,以均质土坡可靠度问题为例,证明该方法在边坡可靠度分析中的有效性。结果表明,边坡可靠度分析的非侵入式随机有限元法能够有效地考虑边坡变形对边坡可靠度的影响,计算效率远远高于蒙特卡罗模拟方法（MCS）,是解决复杂边坡可靠度问题一种有效地分析手段;黏聚力和内摩擦角变异性对边坡安全系数前四阶统计矩具有明显的影响,重度变异性对安全系数前4阶统计矩几乎没有影响;抗剪强度参数间负相关性对边坡安全系数均值几乎没有影响,但对安全系数标准差、偏度和峰度均有明显的影响。此外,随着抗剪强度参数间负相关性的增加,边坡安全系数由近似正态分布逐渐变为明显的非正态分布。 相似文献
6.
针对传统响应面法在求解具有高度非线性隐式功能函数边坡可靠性问题上的局限性,采用适用于处理高维度、小样本、非线性回归问题的高斯过程回归模型构建隐式功能函数的响应面,将高斯过程响应面与蒙特卡罗模拟法相结合,通过构造合理的迭代方式,在利用高斯过程回归模型的不确定性评价功能获取最优采样点的基础上,实现了高斯过程响应面动态更新,由此提出了边坡失效概率快速估计的高斯过程动态响应面法。利用数值算例验证了该方法的有效性,在此基础上对3个边坡算例进行了可靠性分析。结果表明,与传统响应面法相比较,该方法计算精度与计算效率明显较高,易于与既有的边坡分析软件相结合,且实现容易,适用于边坡可靠性的快速分析。 相似文献
7.
将极限分析的上限定理、有限元离散思想、随机规划理论和蒙特卡洛方法这四者结合起来,提出了一种土质边坡可靠度分析的上限数值方法。首先采用三节点有限单元离散土质边坡,然后将土体的抗剪参数设为随机变量,根据上限定理构建同时满足三角形单元的塑性流动约束条件、单元公共边的塑性流动约束条件和单元速度边界条件的机动许可速度场,并根据内功功率等于外功功率条件建立目标函数,构建土质边坡可靠度分析的上限法随机规划模型。采用蒙特卡洛方法求解上限法随机规划模型,同时提出了一种基于上限法速度场的边坡失效风险系数估算方法,该方法特别适用于具有多种失效模式的边坡风险分析。对2个经典算例进行了深入分析,验证了方法的正确性。 相似文献
8.
In recent years, data assimilation techniques have been applied to an increasingly wider specter of problems. Monte Carlo
variants of the Kalman filter, in particular, the ensemble Kalman filter (EnKF), have gained significant popularity. EnKF
is used for a wide variety of applications, among them for updating reservoir simulation models. EnKF is a Monte Carlo method,
and its reliability depends on the actual size of the sample. In applications, a moderately sized sample (40–100 members)
is used for computational convenience. Problems due to the resulting Monte Carlo effects require a more thorough analysis
of the EnKF. Earlier we presented a method for the assessment of the error emerging at the EnKF update step (Kovalenko et
al., SIAM J Matrix Anal Appl, in press). A particular energy norm of the EnKF error after a single update step was studied.
The energy norm used to assess the error is hard to interpret. In this paper, we derive the distribution of the Euclidean
norm of the sampling error under the same assumptions as before, namely normality of the forecast distribution and negligibility
of the observation error. The distribution depends on the ensemble size, the number and spatial arrangement of the observations,
and the prior covariance. The distribution is used to study the error propagation in a single update step on several synthetic
examples. The examples illustrate the changes in reliability of the EnKF, when the parameters governing the error distribution
vary. 相似文献
9.
《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2013,7(3-4):195-206
A recently developed Bayesian Monte Carlo (BMC) method and its application to safety assessment of structures are described in this paper. We use a one-dimensional BMC method that was proposed in 2009 by Rajabalinejad in order to develop a weighted logical dependence between successive Monte Carlo simulations. Our main objective in this research is to show that the extended BMC can dramatically improve simulation efficiency by using prior information from modelling and outcomes of preceding simulations. We provide theory and numerical algorithms for an extended BMC method for multi-dimensional problems, integrate it with a probabilistic finite element model and apply these coupled models to assessment of reliability of a flood defence for the 17th Street Flood Wall system in New Orleans. This is the first successful demonstration of the BMC method to a complex system. We provide a comparison of the numerical efficiency for the BMC, Monte Carlo (MC) and Dynamic Bounds methods that are used in reliability assessment of complex infrastructures. 相似文献
10.
区间非概率可靠性方法的设计思想有时可能会过于保守而出现无谓增加工程造价的情况,从而导致区间非概率可靠性方法的适用性存在问题。为此,引入概率理论和蒙特卡洛法,得到区间非概率可靠性方法适用性评价指标,从而建立出区间非概率可靠性方法适用性的研究方法。结合实际工程,探讨区间非概率可靠性方法在岩溶区稳定性分析中是否会出现适用性问题,并研究具有区间不确定性的自变量变化幅度、自变量个数以及函数类型对区间非概率可靠性方法适用性的影响规律。研究表明,当自变量的变化幅度较大且自变量个数较多时,区间非概可靠性方法的适用性存在明显不足,相关研究结论能够为区间非概率可靠性方法的应用提供参考。 相似文献
11.
12.
13.
基于蒙特卡罗随机有限元法的三维随机渗流场研究 总被引：3，自引：0，他引：3
通过建立改进Latin超立方抽样和对偶抽样相结合的复合抽样法,以提高Monte Carlo方法的计算效率,并将其引入Monte Carlo随机有限元（MSFEM）。基于三维有限元模型,采用MCSFEM对山坪土石坝进行随机渗流场分析,研究渗透系数和水头边界条件的随机特性对渗流场的干扰,进行变异系数和抽样次数的敏感性分析。最后,对渗流场的求解量进行概型分析。研究表明：总水头势、流速及渗透体积力的变异性随着渗透系数随机性的增强而变大;复合抽样法既能有效加快Monte Carlo的收敛速度,又能降低样本间的统计相关性,说明了该方法的实用性与有效性;当渗透系数服从正态分布时,渗流场中所取结点的水头和坡降也服从正态分布。 相似文献
14.
Greco提出的临界滑裂面搜寻的Monte Carlo搜索技术具有原理简单、适应性强、搜索性能好及容易编程实现等优点,目前该类方法已在边坡稳定的优化计算中有许多成功的应用。为能够在多块体上限法求解地基极限承载力的优化计算中应用Monte Carlo搜索技术,基于上限法相容速度场的要求及地基承载力问题的特点,对Monte Carlo搜索技术实现中的目标函数、几何约束条件、初始破坏面的产生以及收敛准则等重新进行了设置。由于Monte Carlo搜索技术随机性的特点,某一次的搜索优化往往存在陷入局部极值的危险,为解决这一不足,采取了随机设置多次初始破坏面分别进行搜索优化的办法,计算表明,优化效果很好。通过对实际问题的计算以及对比发现,Monte Carlo搜索技术在此处多块体上限法求解地基承载力问题中的优化应用是相当成功的。此外,由于此处的优化是以破坏面上的节点为对象的,因此,不但可以方便地考虑三角形块体的优化,而且也可以方便地考虑四边形块体的优化问题,其适用性更强。 相似文献
15.
针对在总结目前的群桩可靠度设计理论完全是基于承载力,提出了对于超大超长群桩基础采用基于沉降的可靠度设计概念,其中沉降计算模式考虑了桩身压缩以及桩端刺入量。在讨论了计算参数的分布规律后,用蒙特卡罗方法进行了可靠度指标的计算。通过一个算例表明,荷载水平增加会导致群桩可靠度指标急剧降低;可接受位移增加,可靠度指标增大,但这种趋势逐渐变缓。 相似文献
16.
提出了一套基于随机响应面法的边坡系统可靠度分析方法。该方法首先从大量潜在滑动面中筛选出代表性滑动面。针对每条代表性滑动面,采用Hermite多项式展开建立其安全系数与土体参数间的非线性显式函数关系（即随机响应面）。然后,采用直接蒙特卡洛模拟计算边坡系统失效概率。在蒙特卡罗模拟中,采用所有代表性滑动面的随机响应面计算每一组样本所对应的边坡最小安全系数。最后,以两个典型多层边坡系统可靠度问题为例验证了该方法的有效性。结果表明：文中提出的边坡系统可靠度分析方法能够有效地识别边坡代表性滑动面,具有较高的计算精度和效率,并且确定代表性滑动面时无需计算滑动面间的相关系数。同时该方法可以有效地计算低失效概率水平的边坡系统可靠度,为含相关非正态参数的边坡系统可靠度问题提供了一条有效的分析途径。此外,多层边坡可能同时存在多条潜在滑动面,基于单一滑动面（如临界确定性滑动面）或者部分代表性滑动面进行边坡系统可靠度分析均会低估边坡失效概率。 相似文献
17.
V.U. Nguyen 《Computers and Geotechnics》1985,1(2):117-138
In this paper, the reliability index β is examined for its applicability in geotechnics. A statistical finite difference scheme is proposed to evaluate partial derivatives of the limit state function, enabling the computation of the reliability index β. Through illustrative examples, it is demonstrated that the proposed procedure gives results in excellent agreement with those obtained by the Monte Carlo simulation method, and yet it involves considerable savings in computing time. Extension of the reliability index method to cover many classes of problems involving correlated variables is highlighted. 相似文献
18.
The effect of heterogeneity of soils on a seismic design procedure based on residual displacement according to safety factors is examined. Although soils are heterogeneous in nature, at present the seismic designs of embankments implement the assumption that soils are homogeneous. In this study, a seismic reliability analysis using a Monte Carlo simulation and considering the heterogeneity of soil strength was applied to the Newmark sliding block method. The data of the analysis in this study were based on in-situ soil test results of actual airport embankments. This paper indicates a rational and practical approach to modifying the actual heterogeneous soil conditions into homogeneous design parameters for the Newmark sliding block method in homogeneous ground conditions. 相似文献
19.
A practical and efficient approach of implementing second‐order reliability method (SORM) is presented and illustrated for cases related to foundation engineering involving explicit and implicit limit state functions. The proposed SORM procedure is based on an approximating paraboloid fitted to the limit state surface in the neighborhood of the design point and can be easily carried out in a spreadsheet. Complex mathematical operations are relegated to relatively simple user‐created functions. The failure probability is calculated automatically based on the reliability index and principal curvatures of the limit state surface using established closed‐form SORM formulas. Four common foundation engineering examples are analyzed using the proposed method and discussed: immediate settlement of a flexible rectangular foundation, bearing capacity of a shallow footing, axial capacity of a vertical single pile, and deflection of a pile under lateral load. Comparisons with Monte Carlo simulations are made. In the case of the laterally loaded pile, the friction angle of the soil is represented as a one‐dimensional random field, and pile deflections are computed based on finite element analysis on a stand‐alone computer package. The implicit limit state function is approximated via the response surface method using two quadratic models. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
20.
边坡模糊可靠性分析隶属函数取值界限研究 总被引：1，自引：0，他引：1
针对岩土参数取值所具有的随机性、模糊性与区间性特征,建议采用隶属函数表征参数取值,分别构造了岩土参数三角形分布、正态分布与拟正态分布隶属函数,并建立了采用隶属函数取值界限表示的不同截集水平岩土参数区间值确定方法,提出分别采用均值加减2.5倍标准差与3倍标准差确定岩土参数三角形分布与拟正态分布隶属函数取值界限,进而以此为基础采用模糊点估计分析方法对工程算例进行分析,结果表明,在截集水平个数为11时,模糊点估计方法所得边坡稳定模糊可靠性指标与蒙特卡洛法所得随机概率可靠性指标精度相当,截集水平个数为9时,评价结果偏安全,建议在工程分析时,截集水平取0.10.9间的9个,该方法计算过程直接简单,计算代价低,更具工程实用性。 相似文献