共查询到20条相似文献，搜索用时 125 毫秒
1.
This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way. 相似文献
2.
Monitoring of the progressive convergence of a tunnel shows that deformations occurring in the soil surrounding a tunnel exhibit a strong evolution with time. This time‐dependent behaviour can be linked to three essential factors: the distance from the point of interest to the working face over time, the distance of unsupported tunnel to the working face and the viscous properties of the soil. The objective of this paper is to propose a constitutive model of the time‐dependent behaviour of soil which has been developed within the framework of elastoplasticity–viscoplasticity and critical state soil mechanics. The consideration of viscoplastic characteristic sets the current model apart from the CJS (Cambou, Jafari and Sidoroff) model as the basic elastoplastic model, and introduces an additional viscous mechanism. The evolution of the viscous yield surface is governed by a particular hardening called ‘viscous hardening’ with a bounding surface. The proposed constitutive model has been applied in the analysis of tunnelling. Two kinds of numerical calculations have been used in the analysis, axisymmetric analysis and plane strain analysis. Monitoring of the progressive convergence of a tunnel conducted in the railway tunnel of Tartaiguille (France), has been used to describe the calculation procedure proposed and the capability of the model. The finite difference software, fast Lagrangian analysis of continua (FLAC), has been used for the numerical simulation of the problems. The comparison of results shows that the observed deformations could have been reasonably predicted by using the constitutive model and calculation strategy proposed. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
3.
Rockfalls that trigger scree‐laden snow avalanches are common in mountain ranges, but the resulting avalanche development and its role in understanding the sedimentology of scree slopes are rarely described in detail. On Riepenwand (2774 m above sea‐level, Kalkkögel range, Alps), on 6 May 2011 a 5800 m3 rockfall of dolostone detached from the flank of a gorge in the upper part of the mountain. After first collapsing into the gorge, the fragmented rock mass fell down freely for 150 m onto a talus covered by coarse‐granular snow. Rockfall impact triggered a medium‐scale avalanche that developed: (i) a lower layer A of entrained, pure snow; and (ii) an upper layer B of clay‐sized to boulder‐sized fragments mixed with snow. This ‘two‐layer scree/snow avalanche’ halted in the distal slope segment of the talus. Boulders within layer B mainly came to rest in the distal part of the avalanche deposit. Fragments smaller than cobble‐size grade did not show obvious downslope segregation. With snowmelt, the rockfall fragments dispersed in layer B were concentrated to a clast‐supported veneer that was draped over the older talus surface upon slower melting of avalanche layer A. In the grain‐size fraction ≤16 mm, a mean of 5 wt% matrix (silt‐sized to clay‐sized grains) of the rockfall‐derived scree of layer B is similar to a mean matrix content of 7 wt% within stratified talus slopes of the Kalkkögel range. This similarity suggests that a major share of matrix – widespread in stratified talus – stems from rockfalls. The characteristics of the scree veneer as melt‐lag of a scree‐laden snow avalanche will be blurred with time. Fossil talus successions may contain a substantial proportion of scree carried down by snow avalanches. The formation of a distinct sedimentary facies of snow avalanche‐deposited scree is impeded by processes of redeposition and deposit modification on talus. 相似文献
4.
Recognition of non‐linear constitutive rock/soil model from experimental results is often multi‐modal in the large parameter space. A genetic evolution algorithm is thus proposed for its recognition, including that of structure of the model and coefficients in the model. The structure of the model can be firstly determined according to mechanical mechanism if the mechanism is clearly understood or searched by using evolutionary algorithm. The coefficients to be determined are then searched in global optional space. With the new evolutionary algorithm, the non‐linear stress–strain–time constitutive law to describe strain softening behaviours of diatomaceous soil under consolidated and undrained state was recognized by learning stress–strain–time behaviour of an intact sample under consolidated pressure of σc=0.1 MPa and strain velocity ofa=0.175%/min. This model gave reasonable prediction for diatomaceous soils under varying consolidated pressures (0.1–3.5 MPa) and strain velocities (0.0044–1.75%/min). It indicates that the methodology proposed in this paper is robust enough and strongly attractive for recognition of non‐linear constitutive model of soil and rock materials. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
5.
Stress‐driven integration strategies and m‐AGC tangent operator for Perzyna viscoplasticity and viscoplastic relaxation: application to geomechanical interfaces 
下载免费PDF全文
下载免费PDF全文 The paper proposes a stress‐driven integration strategy for Perzyna‐type viscoplastic constitutive models, which leads also to a convenient algorithm for viscoplastic relaxation schemes. A generalized trapezoidal rule for the strain increment, combined with a linearized form of the yield function and flow rules, leads to a plasticity‐like compliance operator that can be explicitly inverted to give an algorithmic tangent stiffness tensor also denoted as the m‐AGC tangent operator. This operator is combined with the stress‐prescribed integration scheme, to obtain a natural error indicator that can be used as a convergence criterion of the intra‐step iterations (in physical viscoplasticity), or to a variable time‐step size in viscoplastic relaxation schemes based on a single linear calculation per time step. The proposed schemes have been implemented for an existing zero‐thickness interface constitutive model. Some numerical application examples are presented to illustrate the advantages of the new schemes proposed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
6.
The Barcelona basic model (BBM) successfully explained many key features of unsaturated soils and received extensive acceptance. It is also one of the few elastoplastic constitutive models for unsaturated soils that have been implemented within finite element codes and applied to the analysis of real boundary value problems. The BBM was proposed in incremental forms according to theories of soil plasticity in which individual aspects of the isotropic virgin behavior are controlled by multiple parameters, whereas at the same time, a single parameter controls more than one aspect of soil behavior. Although a variety of methods have been recently developed for calibrating model parameters for elastoplastic soil models, at present, there are no well‐established, simple, and objective methods for selecting parameter values in the BBM from laboratory tests. This has been one of the major obstacles to the dissemination of this constitutive model beyond the research context. This article presents an optimization approach especially developed for simple and objective identification of material parameters in the BBM. This is achieved by combining a modified state surface approach, recently proposed to model the elastoplastic behavior of unsaturated soils under isotropic stress conditions, with the Newton or quasi‐Newton method to simultaneously determine the five parameters governing isotropic virgin behavior in the BBM. The comparison between results using the proposed method and an existing method for the same laboratory tests was discussed from which the simplicity and objectivity of the proposed method were evaluated. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
7.
Model identification and parameter estimation of elastoplastic constitutive model by data assimilation using the particle filter 下载免费PDF全文
下载免费PDF全文 Data assimilation, using the particle filter and incorporating the soil‐water coupled finite element method, is applied to identify the yield function of the elastoplastic constitutive model and corresponding parameters based on the sequential measurements of hypothetical soil tests and an actual construction sequence. In the proposed framework of the inverse analysis, the unknowns are both the particular parameter within the exponential contractancy model, nE, which parameterizes various shapes for the yield function of the competing constitutive models, including the original/the modified Cam‐Clay models and in‐between models and the parameters of the corresponding constitutive model. An appropriate set, consisting of the yield function of the constitutive model and the parameters of the constitutive model, can be simultaneously identified by the particle filter to describe the most suitable soil behavior. To examine the validity of the proposed procedure, hypothetical and actual measurements for the displacements of a soil specimen were obtained for consolidated and undrained tests through a synthetic FEM computation and for consolidated and drained tests, respectively. After examining the applicability of the proposed procedure to these test results, the present paper then focuses on the actual measured data, ie, the settlement behavior including the lateral deformation of the Kobe Airport Island constructed on reclaimed land. 相似文献
8.
In this paper, the onset of mechanical instability in time‐sensitive elasto‐viscoplastic solids is theoretically analyzed at the constitutive level and associated with the occurrence of ‘spontaneous accelerations’ under stationary external perturbations. For this purpose, a second‐order form of Perzyna's constitutive equations is first derived by time differentiation, and a sufficient stability condition is identified for general mixed loading programs. These loading conditions are in fact the most general in both laboratory tests and real boundary value problems, where a combination of certain stress and strain components is known/prescribed. The theoretical analysis leads to find precise stability limits in terms of material hardening modulus. In the case of constitutive relationships with isotropic strain‐hardening, no instabilities are possible while the hardening modulus is larger than the so‐called ‘controllability modulus’ defined for (inviscid) elasto‐plastic materials. It is also shown that the current stress/strain rate may also directly influence the occurrence of elasto‐viscoplastic instability, which is at variance with elasto‐plastic inviscid media. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
9.
In recent years, a number of constitutive models have been proposed to describe mathematically the mechanical response of natural clays. Some of these models are characterized by complex formulations, often leading to non‐trivial problems in their numerical integration in finite elements codes. The paper describes a fully implicit stress‐point algorithm for the numerical integration of a single‐surface mixed isotropic–kinematic hardening plasticity model for structured clays. The formulation of the model stems from a compromise between its capability of reproducing the larger number of features characterizing the behaviour of structured clays and the possibility of developing a robust integration algorithm for its implementation in a finite elements code. The model is characterized by an ellipsoid‐shaped yield function, inside which a stress‐dependent reversible stiffness is accounted for by a non‐linear hyperelastic formulation. The isotropic part of the hardening law extends the standard Cam‐Clay one to include plastic strain‐driven softening due to bond degradation, while the kinematic hardening part controls the evolution of the position of the yield surface in the stress space. The proposed algorithm allows the consistent linearization of the constitutive equations guaranteeing the quadratic rate of asymptotic convergence in the global‐level Newton–Raphson iterative procedure. The accuracy and the convergence properties of the proposed algorithm are evaluated with reference to the numerical simulations of single element tests and the analysis of a typical geotechnical boundary value problem. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
10.
A constitutive model for crushed salt is presented in this paper. A creep constitutive model is developed first and compared with test results. The constitutive model presented here concentrates on creep deformation because saline media behave basically in a ductile and time‐dependent way. An idealized geometry is used as a common framework to obtain stress–strain macroscopic laws based on two deformation mechanisms: fluid‐assisted diffusional transfer creep and dislocation creep. The model is able to predict strain rates that compare well with results from laboratory tests under isotropic and oedometric conditions. Macroscopic laws are written using a non‐linear viscous approach, which incorporates also a viscoplastic component, based on critical state theory. The viscoplastic term is intended for non‐creep deformation mechanisms such as grain reorganization and crushing. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
11.
M. Karstunen C. Wiltafsky H. Krenn F. Scharinger H. F. Schweiger 《国际地质力学数值与分析法杂志》2006,30(10):953-982
The paper investigates the effect of constitutive models on the predicted response of a simplified benchmark problem, an embankment on soft soil. The soft soil is assumed to have the properties of POKO clay from Finland and five different constitutive models are used to model the deposit. Two of the models are isotropic models, i.e. the Modified Cam Clay model and the Soft‐Soil model. The other models are recently proposed constitutive models that account for plastic anisotropy. The S‐CLAY1 and S‐CLAY1S models are embedded in a standard elasto‐plastic framework and account for anisotropy via a rotational hardening law. In addition, the S‐CLAY1S model accounts for bonding and destructuration. In contrast, the Multilaminate Model for Clay (MMC) accounts for plastic anisotropy by utilizing so‐called multilaminate framework. The results of numerical simulations show that accounting for anisotropy results in notable differences in the predicted settlements and horizontal movements compared to the predictions using the isotropic models. There are also significant differences in the K0 predictions by the different constitutive models and this has a significant impact on the results. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
12.
A hierarchical thermo‐hydro‐plastic constitutive model for unsaturated soils and its numerical implementation 下载免费PDF全文
下载免费PDF全文 《国际地质力学数值与分析法杂志》2018,42(15):1785-1805
Unsaturated soils are highly heterogeneous 3‐phase porous media. Variations of temperature, the degree of saturation, and density have dramatic impacts on the hydro‐mechanical behavior of unsaturated soils. To model all these features, we present a thermo‐hydro‐plastic model in which the hydro‐mechanical hardening and thermal softening are incorporated in a hierarchical fashion for unsaturated soils. This novel constitutive model can capture heterogeneities in density, suction, the degree of saturation, and temperature. Specifically, this constitutive model has 2 ingredients: (1) it has a “mesoscale” mechanical state variable—porosity and 3 environmental state variables—suction, the degree of saturation, and temperature; (2) both temperature and mechanical effects on water retention properties are taken into account. The return mapping algorithm is applied to implement this model at Gauss point assuming an infinitesimal strain. At each time step, the return mapping is conducted only in principal elastic strain space, assuming no return mapping in suction and temperature. The numerical results obtained by this constitutive model are compared with the experimental results. It shows that the proposed model can simulate the thermo‐hydro‐mechanical behavior of unsaturated soils with satisfaction. We also conduct shear band analysis of an unsaturated soil specimen under plane strain condition to demonstrate the impact of temperature variation on shear banding triggered by initial material heterogeneities. 相似文献
13.
This paper presents a non‐linear coupled finite element–boundary element approach for the prediction of free field vibrations due to vibratory and impact pile driving. Both the non‐linear constitutive behavior of the soil in the vicinity of the pile and the dynamic interaction between the pile and the soil are accounted for. A subdomain approach is used, defining a generalized structure consisting of the pile and a bounded region of soil around the pile, and an unbounded exterior linear soil domain. The soil around the pile may exhibit non‐linear constitutive behavior and is modelled with a time‐domain finite element method. The dynamic stiffness matrix of the exterior unbounded soil domain is calculated using a boundary element formulation in the frequency domain based on a limited number of modes defined on the interface between the generalized structure and the unbounded soil. The soil–structure interaction forces are evaluated as a convolution of the displacement history and the soil flexibility matrices, which are obtained by an inverse Fourier transformation from the frequency to the time domain. This results in a hybrid frequency–time domain formulation of the non‐linear dynamic soil–structure interaction problem, which is solved in the time domain using Newmark's time integration method; the interaction force time history is evaluated using the θ‐scheme in order to obtain stable solutions. The proposed hybrid formulation is validated for linear problems of vibratory and impact pile driving, showing very good agreement with the results obtained with a frequency‐domain solution. Linear predictions, however, overestimate the free field peak particle velocities as observed in reported field experiments during vibratory and impact pile driving at comparable levels of the transferred energy. This is mainly due to energy dissipation related to plastic deformations in the soil around the pile. Ground vibrations due to vibratory and impact pile driving are, therefore, also computed with a non‐linear model where the soil is modelled as an isotropic elastic, perfectly plastic solid, which yields according to the Drucker–Prager failure criterion. This results in lower predicted free field vibrations with respect to linear predictions, which are also in much better agreement with experimental results recorded during vibratory and impact pile driving. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
14.
为了高精度地提取积雪信息, 消除森林覆盖区以及结冰河流水体对于积雪信息提取的影响, 以Landsat ETM+为数据源, 分析了玛纳斯河流域积雪信息提取的归一化差值积雪指数阈值, 并建立积雪信息提取方法. 对研究区进行了积雪信息提取, 并与国际数据服务平台所得的积雪信息提取结果进行了比较. 结果表明: 基于Landsat数据利用归一化差值积雪指数提取积雪信息时, 其合理阈值应为0.37; 通过总体精度以及Kappa相关系数在结冰水体区域以及森林覆盖区域的提取结果进行对比, 认定所使用的提取方法更加准确可靠. 相似文献
15.
Konstantinos I. Andrianopoulos Achilleas G. Papadimitriou George D. Bouckovalas 《国际地质力学数值与分析法杂志》2010,34(15):1586-1614
This paper presents a new plasticity model developed for the simulation of monotonic and cyclic loading of non‐cohesive soils and its implementation to the commercial finite‐difference code FLAC, using its User‐Defined‐Model (UDM) capability. The new model incorporates the framework of Critical State Soil Mechanics, while it relies upon bounding surface plasticity with a vanished elastic region to simulate the non‐linear soil response. Stress integration of constitutive relations is performed using a recently proposed explicit scheme with automatic error control and substepping, which so far has been employed in the literature only for constitutive models aiming at monotonic loading. The overall accuracy of this scheme is evaluated at element level by simulating cyclic loading along complex stress paths and by using iso‐error maps for paths involving change of the Lode angle. The performance of the new constitutive model and its stress integration scheme in complex boundary value problems involving earthquake‐induced liquefaction is evaluated, in terms of accuracy and computational cost, via a number of parametric analyses inspired by the successful simulation of the VELACS centrifuge Model Test No. 2 studying the lateral spreading response of a liquefied sand layer. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
16.
This paper develops a practical approach to simulating fracture propagation in rock and concrete based on an augmented virtual internal bond (VIB) method in which the cohesion of solid is modeled as material particles interconnected by a network of randomized virtual micro bonds described by the Xu–Needleman potential. The micro bond potential is used to derive macroscale constitutive relations via the Cauchy–Born rule. By incorporating different energy contributions due to stretch and shearing, as well as different energy levels under tension and compression of each micro bond, the derived macro constitutive laws are particularly useful for modeling quasi‐brittle materials such as rock and concrete which usually have different Poisson ratios and much higher compressive strength than tensile strength. The mesh‐size sensitivity associated with strain‐softening in the present constitutive model is addressed by adjusting material constants near the crack tip so that the biJ‐integral is kept equal to the intrinsic fracture energy of the material. Numerical examples demonstrate that the proposed VIB method is capable of simulating mixed mode fracture propagation in rock and concrete with results in consistency with relevant experimental observations. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
17.
This paper presents an analytical solution for cavity expansion in thermoplastic soil considering non‐isothermal conditions. The constitutive relationship of thermoplasticity is described by Laloui's advanced and unified constitutive model for environmental geomechanical thermal effect (ACMEG‐T), which is based on multi‐mechanism plasticity and bounding surface theory. The problem is formulated by incorporating ACMEG‐T into the theoretical framework of cavity expansion, yielding a series of partial differential equations (PDEs). Subsequently, the PDEs are transformed into a system of first‐order ordinary differential equations (ODEs) using a similarity solution technique. Solutions to the response parameters of cavity expansion (stress, excess pore pressure, and displacement) can then be obtained by solving the ODEs numerically using mathematical software. The results suggest that soil temperature has a significant influence on the pressure‐expansion relationships and distributions of stress and excess pore pressure around the cavity wall. The proposed solution quantifies the influence of temperature on cavity expansion for the first time and provides a theoretical framework for predicting thermoplastic soil behavior around the cavity wall. The solution found in this paper can be used as a theoretical tool that can potentially be employed in geotechnical engineering problems, such as thermal cone penetration tests, and nuclear waste disposal problems. 相似文献
18.
19.
In order to model thin‐layered soils a special averaging procedure is proposed. It works with very few restrictions imposed on the constitutive equations used for individual materials. General considerations are followed by an example from open pit mining industry. Geometrical non‐linearity is considered. The proposed method is not necessarily restricted to the problems of soil mechanics. It could also be applied on composite materials. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
20.
A rotational kinematic hardening constitutive model with the capability of predicting the behavior of soil during three‐dimensional stress reversals has been developed. An existing elasto‐plastic constitutive model, the Single Hardening Model, utilizing isotropic hardening serves as the basic framework in these formulations. The framework of the kinematic hardening model was discussed in a companion paper. The previously proposed cross‐anisotropic Single Hardening Model is added to the present kinematic hardening mechanism to capture inherent anisotropy of sands in addition to the stress reversals. This model involves 13 parameters, which can be determined from simple laboratory experiments, such as isotropic compression, drained triaxial compression and triaxial extension tests. The results from a series of true triaxial tests with large three‐dimensional stress reversals performed on medium dense cross‐anisotropic Santa Monica Beach sand are employed for comparison with predictions. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献