共查询到20条相似文献，搜索用时 44 毫秒
1.
Different models were developed for evaluating the probabilistic three-dimensional (3-D) stability analysis of earth slopes and embankments under earthquake loading. The 3-D slope stability model assumed is that of a simple cylindrical failure surface. The probabilistic models evaluate the probability of failure under seismic loading considering the randomness of earthquake occurrence, and earthquake induced acceleration and uncertainties stemming from the discrepancies between laboratory-measured and in-situ values of shear strength parameters. The models also takes into consideration the spatial variabilities and correlations of soil properties. The probabilistic analysis and design approach is capable of obtaining the 2-D and 3-D static and dynamic safety factors, the probability of slope failure, the earthquake induced acceleration coefficient, the yield acceleration coefficient, the earthquake induced displacement, and the probability of allowable displacement exceedance taking into account the local site effect. The approach is applied to a well known landslide case: Congress Street Landslide in Chicago. A sensitivity analysis was conducted on the different parameters involved in the models by applying those models to the Congress Street landslide considering different levels of seismic hazard. Also, a sensitivity analysis was carried out to study the sensitivity of computed results to input parameters of undrained shear strength, and corrective factors. A comparison was made between the different models of failure. The parametric study revealed that the hypocentral distance and earthquake magnitude have major influence on the earthquake induced displacement, probability of failure and dynamic 2-D and 3-D safety factors. 相似文献
2.
针对已滑动或有明显变形的边坡,取定稳定系数值进行反演分析是确定岩土体抗剪强度的重要手段。当边坡滑动面穿越多层岩土体时,盲目地抗剪强度试算反演明显不合理。为解决此问题,构造以多层岩土体抗剪强度为输入,以GeoSlope计算得到的稳定系数、滑面剪入口和剪出口位置为输出的BP神经网络,基于取定的稳定系数和现场测定的滑动面剪入口和剪出口位置,通过重复执行“逆向反推-误差校验-样本修正”实现岩土体抗剪强度的逆向迭代修正反演。工程实例验证结果表明,该方法获取的岩土体抗剪强度基本合理,可供小型边坡防护工程设计参考。该方法成功地规避了BP神经网络以已知信息为输入、以待反演参数为输出的传统做法在解决该问题时为欠定的局限性,对样本库样本数量的要求降低且具有较好精度。 相似文献
3.
Baofeng Di Constantine A. Stamatopoulos Miranda Dandoulaki Eleni Stavrogiannopoulou Meng Zhang Persefoni Bampina 《Natural Hazards》2017,85(2):903-927
The work considers critical slopes located at regions with high danger and proposes a method which approximately predicts the risk of earthquake-induced excessive movement of these slopes, in the case where relevant soil strength data along their slip surface do not exist. The method utilizes (1) simplified constitutive equations predicting soil response along slip surfaces and (2) a multi-block sliding system model, both recently proposed. It involves the following steps: (a) collect relevant topographic information and laboratory test results of past landslides at the region of interest, (b) (i) analyze the relevant laboratory tests to estimate the soil constitutive parameters and (ii) estimate the mobilized residual soil strength by back analysis of relevant past landslides, (c) select constitutive model parameters for future applications at the region based on step (b) and validate them based on analysis of the triggering of the past landslides and (d) apply the selected constitutive model parameters in critical slopes in the region under consideration to predict not only whether triggering occurs, but also the post-triggering slide deformation. The paper, after describing in detail the proposed method, applies it at the Wenchuan region, where the 12th May 2008 earthquake triggered many landslides. During the application, four ring shear test results and twelve landslides of the 12th May 2008 earthquake were considered. The application was successful and the following were observed: (i) in the back analyses, the multi-block model predicted reasonably well the final configuration of all slides, (ii) apart from two significantly larger back-estimated values of the residual soil strength, small scatter existed in the other back-estimated values and (iii) the selected model parameters were duly validated under step (c). Furthermore, as the back-estimated friction angle of most landslides was less than 18°, and the materials along the slip surface have a Liquid Limit value less than 25 %, it is inferred that some, or all of the slip surface during these slides, was sheared in an undrained manner. 相似文献
4.
映秀—卧龙公路沿线汶川地震地质灾害研究 总被引：4，自引：0，他引：4
映秀—卧龙公路是汶川地震灾区距震中最近、震害最为严重的一条公路,本文对沿线地震地质灾害进行了详细的调查研究。依据震害特征,将沿线震害划分为斜坡中上部强风化岩体及土层失稳、结构面切割岩体崩滑失稳、滑坡、泥石流等4类,并分析了沿线震害发育规律。调查表明:龙门山后山断裂两侧地震地质灾害呈现显著的差异性,主要是由深大断裂的消震隔震效应,地貌放大效应,地质结构等三方面因素决定的。通过134条实测剖面分析,研究了地震失稳斜坡坡度和失稳部位。地震诱发失稳斜坡坡度在33°~84°之间,主要分布在41°~65°之间,可以认为地震诱发斜坡失稳灾害主要发生在40°以上的斜坡。斜坡失稳部位主要分布在斜坡中上部以及地貌突出部位,主要失稳部位在0.4坡高以上。从研究斜坡动力失稳的角度,将沿线斜坡划分为基岩-土层及强风化层斜坡地质结构、不利外倾结构面基岩斜坡地质结构、块状构造基岩斜坡地质结构、块碎石土层斜坡地质结构等几种地质结构模型,分析论述了各种地质结构相应的地震地质灾害类型及特点。 相似文献
5.
Sergio A. Sepúlveda Alejandra Serey Marisol Lara Andrés Pavez Sofía Rebolledo 《Landslides》2010,7(4):483-492
On the 21st of April 2007, the Aysén Fjord earthquake (Mw 6.2) in southern Chile (45.3° S, 73.0° W) triggered hundreds of landslides in the epicentral area along the fjord coast and surroundings. Some of these landslides induced large tsunami waves within the fjord causing fatalities and damaging several salmon farms, the most important economic activity of the area. The landslides included rock slides and avalanches, rock falls, shallow soil and soil–rock slides, and debris flows. The earthquake was the climax of a seismic swarm that began 3 months earlier. The seismicity is associated with tectonic activity along the Liquiñe–Ofqui fault zone (LOFZ), a major structural feature of the region. The earthquake-induced landslides were mapped and classified from field observations and remote sensing analysis. The landslide areas and epicentral distances are within the expected range for the earthquake magnitude according to worldwide data, while the position of landslides on the slopes strongly suggests topographic amplification effects in triggering the failures. The location of the landslides is also clearly related to some of the main fault branches of the LOFZ. The seismic event has configured a new situation of seismic and landslide hazard in the Aysén region and along the LOFZ, where the presence of towns and economic infrastructure along the coasts of several fjords constitutes a potential risk that was not considered before this seismic event. 相似文献
6.
桩板式抗滑挡墙地震响应的振动台试验研究 总被引：2，自引：0，他引：2
汶川地震路基震害调查表明,在顺层或堆积体边坡中的桩板式抗滑挡墙具有良好的抗震性能。为了更好地了解该结构的抗震性能和优化抗震设计方法,以大型振动台模型试验为手段对其进行研究。为明确地震作用下桩板式抗滑挡墙的地震响应特性,试验采用缩尺的卧龙台站实测地震波对模型激励。试验结果揭示了土压力沿桩身分布规律、桩体位移和边坡岩土体加速度的地震响应特征。研究表明,地震土压力沿桩身呈非线性分布,竖向地震荷载对水平加速度有放大效果。所以,双向加载时的地震土压力比水平单向加载时大,但二者差距在地震基本烈度VII、VIII度区域不显著。滑坡推力、滑床对桩的土体抗力和桩身位移均与输入地震动峰值加速度成正比,即随着地震动峰值加速度的增加,加速度放大比增大;滑动面材料剪切强度折减,滑坡推力、土体抗力和抗身位移均增大,且增大速率加快。此外,结合试验成果,建议了桩板式抗滑挡墙设计时地震综合影响系数Cz的合理取值,对应地震基本烈度VII、VIII、IX度区分别为0.2、0.35、0.4。试验结果有助于揭示该结构抗震机制,也为其抗震设计提供了可靠依据。 相似文献
7.
On May 21, 2021, at 21:48, the Ms6.4 Yangbi earthquake struck Dali prefecture, Yunnan province, China; the maximum PGA reached 714.78 gal, causing 37 casualties and infrastructures damage. A field investigation demonstrated that seismic landslides were concentrated along the G56 Hangrui and Dayangyun highways, classified as local rock falls and shear slides. The shear slides were more severe than the local rock falls and were located along the Dayangyun highway, which was still under construction when the earthquake occurred, severely impacting following engineering activities. Typical shear slides caused by the earthquake were selected for detailed investigations; electrical resistivity topography (ERT) was conducted to study the failure mechanism. The ERT results indicated that the sliding surface was located at the interface between the overburden layer and the underlying rock stratum. The slope failures along the Dayangyun highway were characterized by several tensile cracks on the rear edge, a relatively short displacement, and an accumulation at the toe of the excavated slope where reinforcement measures had not yet been completed. The combined effect of engineering activities and a geological structure provided favorable conditions for slope failure. In addition, seismic motion triggered the landslides; however, engineering activity was a specific and significant factor contributing to the shear slides during the Yangbi earthquake. Excavation and incomplete construction reduced the stability of the overburden soil layer. Although the scale of the seismic landslides in the Yangbi earthquake was generally small, the coming rainy season after the earthquake may contribute for sliding again.
相似文献8.
Aurelian Catalin Trandafir Kyoji Sassa 《Geotechnical and Geological Engineering》2006,24(6):1627-1639
This paper outlines a methodology for evaluating the likelihood of catastrophic landslide occurrence on gentle slopes in liquefiable
soils during earthquake. The approach is based on a modified Newmark sliding block model of assessing the earthquake-induced
undrained landslide displacements for conditions of no shear stress reversals on the sliding surface. By employing the shear
resistance-displacement relationship from undrained monotonic ring shear tests, the simulation model incorporates the sensitivity
of computed displacements to variations in yield acceleration. The proposed approach involves an examination of undrained
seismic slope performance under various horizontal seismic waveforms scaled to different specific values of the peak earthquake
acceleration. An example problem illustrates how the proposed methodology may be used to demarcate, based on the magnitude
of permanent seismic displacement, the levels of low, moderate and high risk of catastrophic landslide on a gentle slope in
a saturated cohesionless soil susceptible to liquefaction during earthquake. 相似文献
9.
东昆仑断裂是青藏高原北部现今仍在强烈活动的左旋走滑地震断裂之一,该断裂的未来地震活动及其突发性粘滑错动是青藏铁路面临的重大工程地质问题.本文基于断裂几何学和运动学特征,通过加入8m的水平左旋位移,模拟了东昆仑断裂未来地震活动震中位于铁路线附近时铁路变形效应.结果表明,震中位于铁路线附近时,基岩整体移动,而第四纪松散层和道床则发生了变形,靠近断裂带附近的第四系自下而上水平位移明显减小,而铁轨和道床没有明显的断错,表现为长度约为25m的连续左旋弯曲变形;在铁路东、西两侧形成NE向的张裂陷和NW向的地震鼓包.在断裂带附近,铁轨发生了严重扭曲,铁轨应力自断裂带向两侧逐渐降低,而且铁轨的最大剪应力平面与铁轨的延伸方向垂直,因而在地震影响下,铁轨最有可能发生的破坏是剪切性的,并提出加宽路基、置换土层等工程防治措施. 相似文献
10.
11.
极限分析上限方法在海底斜坡稳定性评价中受到了广泛关注,但已有成果未考虑地震荷载以及多土层海底斜坡可能出现的局部破坏机制。基于上限定理,推导了拟静力水平地震条件下多土层海底斜坡外力功率与内能耗散率平衡方程;结合强度折减技术和最优化方法,求解了海底斜坡整体和局部地震稳定性安全系数,并实现了多土层海底斜坡的局部滑动面搜索;通过典型算例分析,验证了本文方法的有效性。在此基础上,探讨了不同水平地震条件下两种组合土层海底斜坡的整体和局部稳定性,通过与数值解对比,其结果可以较准确地评价海底斜坡稳定性并有效预测滑移面位置。最后,将极限分析上限方法应用于一海底斜坡工程实例。 相似文献
12.
Rapid Identification and Emergency Investigation of Surface Ruptures and Geohazards Induced by the M_s 7.1 Yushu Earthquake 总被引：1，自引：0，他引：1
ZHANG Yongshuang YAO Xin XIONG Tanyu MA Yinsheng HU Daogong YANG Nong GUO Changbao 《《地质学报》英文版》2010,84(6):1315-1327
<正>The rapid identification based on InSAR technology was proved to be effective in our emergency investigation of surface ruptures and geohazards induced by the Yushu earthquake.The earthquake-generating fault of the Yushu earthquake is the Yushu section of the Garze-Yushu faults zone.It strikes NWW-NW,23 km long near the Yushu County seat,dominated by left-lateral strike slip,and appearing as a surface rupture zone.The macroscopic epicenter is positioned at Guo-yang-yan -song-duo of Gyegu Town(33°03'11"N,96°51'26"E),where the co-seismic horizontal offset measured is 1.75 m.Geohazards induced by the Yushu earthquake are mainly rockfalls,landslides,debris flows, and unstable slopes.They are controlled by the earthquake-generating fault and are mostly distributed along it.There are several geohazard chains having been established,such as earthquake,canal damage,soil liquefying,landslide-debris flow,earthquake,soil liquefying,roadbed deformation,etc.In order to prevent seismic hazards,generally,where there is a visible surface rupture induced by the Yushu earthquake,reconstruction should be at least beyond 20 m,on each side,from it.Sufficient attention should also be given to potential geohazards or geohazard chains induced by the earthquake. 相似文献
13.
地震效应和坡顶超载对均质土坡稳定性影响的拟静力分析 总被引：3，自引：0，他引：3
基于强度折减技术和极限分析上限定理,假定机动容许的速度场破坏面,考虑坡顶超载、水平和竖向地震效应影响推导了边坡稳定性安全系数的计算表达式。采用序列二次规划迭代方法（和内点迭代方法）对边坡安全系数目标函数进行能量耗散最小化意义上的优化计算,与多个算例的对比验证了其方法和程序计算的正确性;对影响土质边坡动态稳定性的一些因素进行了参数分析,分析表明：随着边坡倾角?、坡顶超载q、水平和竖向地震效应影响系数的增大,边坡稳定性安全系数显著下降;随着坡顶超载q、水平地震效应影响系数kh的增大、竖向地震效应影响系数kv的减小,边坡的潜在滑动面越来越深,潜在破坏范围越来越大。竖向地震效应对边坡稳定性也有一定影响,强震条件下的设计计算必须考虑竖向地震效应的影响。 相似文献
14.
基于强度折减概念的滑坡稳定性三维分析方法(I)：滑带土抗剪强度参数反演分析 总被引：20，自引：5，他引：15
滑带土抗剪强度是滑坡稳定性分析和防治工程设计中十分重要而又难于确定的参数之一。因此,基于临界状态假定的二维反分析方法得到了广泛应用。但是,自然界发生的滑坡基本上呈三维形态,其主滑方向有时变化也较大,使得有必要研究一种滑带土抗剪强度的三维反分析方法和滑坡稳定性的三维评价方法。笔者建议了一种基于强度折减概念的滑带土抗剪强度反分析方法,即通过逐步折减滑动面的强度参数,使滑动面的塑性区完全贯通,此时,塌滑体处于极限状态,所用强度参数即为滑带土的平均抗剪强度参数。从洪家渡水电站1#塌滑体计算成果来看,反演的滑带土摩擦角较二维反演值低4.1?,反映了滑坡体的三维效应,验证了所建议方法的可行性。 相似文献
15.
2017年8月8日21时19分,四川阿坝州九寨沟县发生7.0级地震,震中位于巴颜喀拉块体东边界虎牙断裂和东昆仑断裂带东段塔藏断裂交汇区域,地震构造背景较为复杂。地震导致了房屋和道路破坏、滑坡崩塌。根据高分辨率卫星影像解译、阶地坎变形的测量和测年数据得到：塔藏断裂东段晚第四纪以来以左旋走滑为主,兼逆分量,水平滑动速率为2.7~4.1 mm/yr,垂直滑动速率为0.56~0.6 mm/yr。结合此次地震的主余震分布、主震震源机制解等综合结果,初步建立了三维发震构造模型,分析认为此次地震属于走滑型地震,主破裂倾角57°~77°,发震断层可能是塔藏断裂的一条分支,是青藏高原块体向东推挤的一次地震事件。基于历史地震、活动断裂和形变观测方面的研究,巴颜喀拉块体具备显著的强震构造背景,对于该块体边界带周缘的强震活动和变形需要继续关注。 相似文献
16.
This study simulates the kinematic behavior of sliding blocks of rock in the earthquake-induced Tsaoling landslide using seismic discontinuous deformation analysis (DDA). We assume sliding rocks are elastic blocks. Detailed joint shear strength parameters are set in DDA in a manner compatible with what is known about the Tsaoling landslide mechanisms. Landslide run-out distance, information from survivors, and the post-failure topography are used to constrain the computational results. Calculations demonstrate that sliding rocks from the ground surface decoupled from those near the basal shear surface during the landslide. Local residents survived because surficial rocks were never deeply buried during the landslide. Additionally, shear strength parameters of material in the deposition area strongly govern final deposit topography. Computational results correlate well with actual post-failure topography. 相似文献
17.
多级组合支挡结构形式在高边坡防护工程中得到了广泛采用,但现有研究却较少涉及这种支挡结构形式的地震土压力计算问题。应用拟静力法和塑性极限分析上限定理,并且基于强度折减技术,推导了重力式挡墙与两级锚杆挡墙组合支挡结构形式的地震主动土压力及其系数的上限解。该上限解考虑了水平和竖向地震系数、墙背倾角、坡面形式及多级支护方式、土体黏聚力、土体与墙背的黏附力等诸多因素。二级锚杆挡墙实例分析表明：静力条件下主动土压力计算值与现有相关方法的计算结果一致,土的抗剪强度折减系数、上挡墙锚杆轴力等参数,对下挡墙地震主动土压力影响显著。二级组合支挡结构地震主动土压力影响参数敏感性分析表明：水平地震系数以及重力式挡墙墙高和倾角的敏感性较大,上挡墙锚杆的轴力和倾角等参数的敏感性相对较小 相似文献
18.
Seismically triggered landslides can cause great damage to the road construction in mountainous areas. The permanent displacement analysis based on Newmark sliding-block model can evaluate risk of these landslides from the perspective of deformation damage and overall failure probability of slopes. However, the sliding-block model does not consider the attenuation effect of the shear strength on the sliding surface during earthquake, causing the calculated value of Jibson method to be less than the actual value. Therefore, the Newmark model was modified by adding attenuation coefficients to the effective internal friction angle and the effective cohesion of geologic units. The landslide areal density was proposed for hazard zoning with the Wenchuan earthquake data. The results showed that the predicted values agreed well with the real distribution of the landslides triggered by the Lushan earthquake. The proposed hazard zoning method in this paper can predict the severity of seismic landslides in consideration of the environmental changes in mountainous regions after the earthquake and provide support for the site selection in highly seismic areas.
相似文献19.
In highway projects, the common destruction effects of earthquake faults include the sand seismic liquefaction, the instability and failure of slopes. Thereinto, the dynamic instability of slopes induced by earthquake faults is most commonly seen. In order to research the influences of the destruction effects of earthquake faults on the dynamic stability of highway slopes, the distribution of previous earthquakes happening in the research area is qualitatively analyzed to establish the earthquake fault model and explore the kinematic characteristics. On this basis, representative slopes–cutting slopes in seismic damage areas are selected to calculate their earthquake response using the ABAQUS finite element program. The displacement field and acceleration output from the program are used to analyze the variation in the displacement of slope top and calculate the distribution coefficient of acceleration. Then, the stress fields output by the dynamic finite element analysis (FEA) are substituted in the genetic algorithm programmed by MATLAB to obtain the time history curves of safety factor of slopes and intelligently search the critical slip surfaces. By doing so, the changing rule of safety factor with seismic acceleration is obtained, together with the range of the safety factor of the envelope diagram of critical slip surfaces. 相似文献
20.
为了准确评价碎石土滑坡的稳定性,通过资料搜集整理和分析、现场工程地质调查与勘探和室内外的物理力学试验,采用三维弹塑性接触有限元算法计算碎石土滑坡的整体稳定性系数和分析滑坡的稳定性。研究结果表明,采用三维弹塑性接触有限元强度折减法计算碎石土滑坡的稳定性系数,可以考虑滑坡体的空间效应,使计算结果更加精确;在碎石土滑坡变形解体破坏过程中,在空间上滑体塑性应变和滑面上岩土体抗剪强度的发挥程度是不一致的;根据三维弹塑性接触有限元算法计算的滑面接触摩擦应力计算二维剖面碎石土滑坡稳定性系数的方法比较适宜于该类型滑坡稳定性的分析评价,能够比较客观、准确地反映滑坡所处的实际状态。 相似文献