共查询到20条相似文献，搜索用时 31 毫秒
1.
A critical state model for overconsolidated structured clays 总被引：1，自引：0，他引：1
This paper presents a generalised critical state model with the bounding surface theory for simulating the stress–strain behaviour of overconsolidated structured clays. The model is formulated based on the framework of the Structured Cam Clay (SCC) model and is designated as the Modified Structured Cam Clay with Bounding Surface Theory (MSCC-B) model. The hardening and destructuring processes for structured clays in the overconsolidated state can be described by the proposed model. The image stress point defined by the radial mapping rule is used to determine the plastic hardening modulus, which varies along loading paths. A new proposed parameter h, which depends on the material characteristics, is introduced into the plastic hardening modulus equation to take the soil behaviour into account in the overconsolidated state. The MSCC-B model is finally evaluated in light of the model performance by comparisons with the measured data of both naturally and artificially structured clays under compression and shearing tests. From the comparisons, it is found that the MSCC-B model gives reasonable good simulations of mechanical response of structured clays in both drained and undrained conditions. With its simplicity and performance, the MSCC-B model is regarded as a practical geotechnical model for implementation in numerical analysis. 相似文献
2.
In recent years, a number of constitutive models have been proposed to describe mathematically the mechanical response of natural clays. Some of these models are characterized by complex formulations, often leading to non‐trivial problems in their numerical integration in finite elements codes. The paper describes a fully implicit stress‐point algorithm for the numerical integration of a single‐surface mixed isotropic–kinematic hardening plasticity model for structured clays. The formulation of the model stems from a compromise between its capability of reproducing the larger number of features characterizing the behaviour of structured clays and the possibility of developing a robust integration algorithm for its implementation in a finite elements code. The model is characterized by an ellipsoid‐shaped yield function, inside which a stress‐dependent reversible stiffness is accounted for by a non‐linear hyperelastic formulation. The isotropic part of the hardening law extends the standard Cam‐Clay one to include plastic strain‐driven softening due to bond degradation, while the kinematic hardening part controls the evolution of the position of the yield surface in the stress space. The proposed algorithm allows the consistent linearization of the constitutive equations guaranteeing the quadratic rate of asymptotic convergence in the global‐level Newton–Raphson iterative procedure. The accuracy and the convergence properties of the proposed algorithm are evaluated with reference to the numerical simulations of single element tests and the analysis of a typical geotechnical boundary value problem. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
3.
Suksun Horpibulsuk Martin D. Liu Deepa S. Liyanapathirana Jirayut Suebsuk 《Computers and Geotechnics》2010,37(1-2):1-9
In this paper, the mechanical properties of cemented clay are studied. The theoretical framework of the Structured Cam Clay (SCC) model is extended to describe the behaviour of cemented clay. The SCC model is modified to take into account special features of the behaviour of cemented clay. The widely used mean effective stress parameter is modified to include the influence of cementation on the strength and the plastic deformation of cemented clay. A new destructuring function is also suggested to represent the removal of the cementation structure, especially in the formation of the final failure state for artificially strongly cemented clay. The revised model is then employed to simulate and predict the behaviour of cemented clay with various degrees of cementation and confining stresses. The main features of the complicated behaviour of cemented clay can be reasonably represented well by the theoretical framework of the SCC model. Finally, the influence of cementation on the model parameters is discussed, and empirical equations are proposed to determine some of the key model parameters for engineering practice. 相似文献
4.
5.
A two-surface plasticity model for stiff clay 总被引：1，自引：1，他引：0
This paper presents a constitutive model for describing some important features of the behavior of natural stiff clay evidenced experimentally such as the limited elastic zone, the presence of strain hardening and softening, and the smooth transition from elastic behavior to a plastic one. The model, namely ACC-2, is an adapted Modified Cam Clay model with two yield surfaces: similarly to bounding surface plasticity theory, an additional yield surface—namely Inner yield surface—was adopted to account for the plastic behavior inside the conventional yield surface. A progressive plastic hardening mechanism was introduced with a combined volumetric-deviatoric hardening law associated with the Inner yield surface, enabling the plastic modulus to vary smoothly during loading paths. The main feature of the proposed model is that its constitutive equations can be simply formulated based on the consistency condition for the Inner yield surface, so that it can be efficiently implemented in a finite element code using a stress integration scheme similar to that of the Modified Cam Clay model. Furthermore, it is proved to be an appropriate model for natural stiff clay: the simulations of a set of tests along different mechanical loading paths on natural Boom Clay show good agreement with the experimental results. 相似文献
6.
T.A. Newson 《Computers and Geotechnics》1998,23(4):277-287
A non-associated constitutive critical state model is proposed. The yield surface is that of Modified Cam Clay, whilst the plastic potential is an empirical function. The yield and plastic potential surfaces in the octahedral plane vary from circular at low stress ratios, to the Matsuoka-Nakai surface at failure. Assessment of the model has been by comparison with laboratory tests on soft clay. Further validation has been by predicting centrifuge model behaviour using a modified form of the CRISP finite element program. Comparisons of the numerical analyses, using the proposed model and Modified Cam Clay, show improved correlations with the experimental data. © 相似文献
7.
在岩土破损力学基础上,基于微观破损机制,提出了考虑各向异性的结构性砂土本构理论。采用Lade-Duncan强度准则考虑中主应力对抗剪强度的影响;采用考虑颗粒排列组构的各向异性状态变量A反映各向异性对土体强度和变形的影响;通过相似扩大重塑土的屈服面反映结构性对土性的影响;通过引入非相关联流动法则考虑各向异性和结构性对土体塑性变形的影响。同时,将基于微观力学机制的损伤演化规律引入结构性土的硬化规律;该硬化规律同时考虑了塑性体积应变和剪切应变对各向异性结构性土强度的影响。然后将该模型用于模拟室内三轴压缩试验,初步验证了该模型的合理性和适用性。 相似文献
8.
The main purpose of the paper is to present a relatively simple, yet realistic, constitutive model for simulations of structured sensitive clays. The proposed constitutive model can simulate 1‐D and isotropic consolidation, and drained and undrained shear response of sensitive structured clay. The proposed sensitive bounding surface model is based on concepts from the modified Cam clay model 8 and bounding surface plasticity 27 , with the addition of a simple degradation law. The key material parameters are M, λ, κ, and ν from the modified Cam clay framework, h from the bounding surface framework to model a smoothed elasto‐plastic transition, and ωv, ωq, and Ssr to model softening associated with destructuration. The model has separate parameters to model destructuration caused by volumetric strain and deviatoric strain. The model is capable of modeling unusual behavior of strain softening during 1‐D compression (i.e., a reduction of effective stress as void ratio decreases). A good match between test results and the model simulation is demonstrated. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
9.
The mechanical behavior of natural clays is affected by their inherent anisotropy and metastable soil structure. A simple hierarchical model that considers initial anisotropy and destructuration was formulated within the framework of critical state soil mechanics. In the proposed model, stress sensitivity and a destructuration index were introduced to account for the degree of bonding and the rate of destructuration, respectively. An inclined yield surface was used to incorporate the effect of the initial anisotropy. The proposed model can be degenerated to the Modified Cam Clay model by setting the initial stress sensitivity equal to unity and using a horizontal yield surface. Reasonable agreement between the model simulations and the experimental results on a variety of stress paths demonstrated that the proposed model can capture well the deformation behavior of natural clay and reconstituted soil. The model was implemented into the finite element program for the numerical analysis of an embankment on soft clay improved with prefabricated vertical drains. The numerical predictions were compared with the field-measured data in terms of embankment settlement. Additionally, the numerical simulations were analyzed in terms of horizontal displacements, excess pore water pressure, mean effective stress and volumetric strain. All of the simulations and comparisons indicate the importance of considering the effects of plastic anisotropy, interparticle bonding and destructuration caused by loading beyond yield stress and field disturbance in analyzing the behavior of an embankment on natural soft clay. 相似文献
10.
This paper examines the drained bearing response of circular footings resting on structured soil deposits. Numerical simulations have been carried out using a finite element formulation of the Structured Cam Clay model. A parametric study was conducted by varying the parameters that govern the behaviour of structured soils and guidelines are given for designers to identify when effects of the soil structure are important. Under fully drained conditions, deformation within the structured soil supporting the footing usually occurs as a local or punching shear failure due to high compressibility of the structured soil and the mobilised bearing pressure increases with the footing movement, without reaching an ultimate value. A novel approximate method is presented to obtain the load–displacement response of a rigid circular footing resting on the surface of a structured soil deposit. This requires the properties of the soil in the reconstituted state and two additional parameters, which govern the natural structure of the soil. The proposed method has been applied to a published case study, where plate load test results are given for rigid circular steel plates resting on structured soil deposits. Fair agreement is observed between the computed and experimental results, suggesting the approximate method may be useful in design studies of foundations on structured soil deposits. 相似文献
11.
The performance of several soil constitutive models was evaluated by comparing experimental results and simulated behavior of a medium plasticity clay. Input parameters for the soil constitutive models were obtained from triaxial compression and extension tests on normally and overconsolidated medium plasticity clay. The soil models employed for this study were the Cam Clay, Modified Cam Clay, 3-SKH, and S-CLAY1 models. In order to investigate the influence of some of the input parameters on the performance of the models, sensitivity analyses were also performed. The comparisons demonstrate that the Cam Clay model was able to predict the normally consolidated compressive behavior of medium plasticity clay. Both 3-SKH and Cam Clay models were able to produce acceptable predictions for stress?Cstrain and stress path behavior for overconsolidated compression of the soil. The 3-SKH model did not perform satisfactorily for predicting pore pressure variations, while the Cam Clay model demonstrated fairly acceptable predictions. For the normally consolidated reduced extension test, the Modified Cam Clay and S-CLAY1 models performed better than the Cam Clay and 3-SKH models in predicting the stress?Cstrain curve, pore pressure variations, and stress path. 相似文献
12.
A new constitutive model for soft structured clays is developed based on an existing model called S‐CLAY1S, which is a Cam clay type model that accounts for anisotropy and destructuration. The new model (E‐SCLAY1S) uses the framework of logarithmic contractancy to introduce a new parameter that controls the shape of the yield surface as well as the plastic potential (as an assumed associated flow rule is applied). This new parameter can be used to fit the coefficient of earth pressure at rest, the undrained shear strength or the stiffness under shearing stress paths predicted by the model. The improvement to previous constitutive models that account for soil fabric and bonding is formulated within the contractancy framework such that the model predicts the uniqueness of the critical state line and its slope is independent of the contractancy parameter. Good agreement has been found between the model predictions and published laboratory results for triaxial compression tests. An important finding is that the contractancy parameter, and consequently the shape of the yield surface, seems to change with the degree of anisotropy; however, further study is required to investigate this response. From published data, the yield surface for isotropically consolidated clays seems ‘bullet’ or ‘almond’ shaped, similar to that of the Cam clay model; while for anisotropically consolidated clays, the yield surface is more elliptical, like a rotated and distorted modified Cam clay yield surface. © 2015 The Authors. International Journal for Numerical and Analytical Methods in Geomechanics published by John Wiley & Sons Ltd. 相似文献
13.
14.
This paper presents a two-surface plasticity model for describing some important features of saturated clay under cyclic loading conditions, such as closed hysteresis loops, cyclic shakedown and degradation, and different stress–strain relations for two-way loading. The model, namely ACC-2-C, is based on the elastoplastic model ACC-2 (an adapted Modified Cam Clay model with two yield surfaces) developed by Hong et al. (Acta Geotech 11(4):871–885, 2015). The small-strain nonlinearity concept is adopted to achieve the nonlinear characteristics of clay during unloading–loading stage. The new hardening law related to accumulated deviatoric plastic strain is proposed for the inner surface to describe the cyclic shakedown and degradation. Following the advantages of the ACC-2 model, the constitutive equations are simply formulated based on the consistency condition for the inner yield surface. The model is conveniently implemented in a finite element code using a stress integration scheme similar to the Modified Cam Clay model. The simulation results are highly consistent with experimental data from drained and undrained isotropic cyclic triaxial tests in normally consolidated saturated clay under both one-way and two-way loadings.
相似文献15.
Ron C. K. Wong 《国际地质力学数值与分析法杂志》2001,25(2):131-153
Oil sands are dense granular materials with interlocked structure and clay shales are heavily overconsolidated clays. They are classified as structured soil or weak rock, exhibiting high peak strength with severe softening and dilation, particularly at low confining stress. The triaxial compression test results indicate that both materials yield linear Mohr–Coulomb envelopes with an apparent cohesion for peak and residual strengths. However, the strength components mobilized from these two materials are very different. This paper investigates if these strength parameters are intrinsic properties or responses derived in triaxial compression conditions. Computer tomography scanning technique is used to aid in examining the micro‐structural features of the sheared specimens such as shear banding pattern, shear band thickness, spatial porosity distributions inside and outside shear bands. These micro‐structural features are used to explain the macro‐deformation response observed in the triaxial compression tests. Mobilization of strength components derived from interlocked structure, cementation, dilation, rolling and critical state are analysed for pre‐, post‐peak softening and residual stages. It is found that the empirical correlation such as Mohr–Coulomb failure criterion based on triaxial compression test results does not necessarily reflect the intrinsic properties of the test materials. Testing conditions are embedded in the empirical correlation. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
16.
This paper presents a kinematic hardening model for describing some important features of natural stiff clays under cyclic loading conditions, such as closed hysteretic loops, smooth transition from the elastic behavior to the elastoplastic one and changes of the compression slope with loading/unloading loops. The model includes two yield surfaces, an inner surface and a bounding surface. A non-associated flow rule and a kinematic hardening law are proposed for the inner surface. The adopted hardening law enables the plastic modulus to vary smoothly when the kinematic yield surface approaches the bounding surface and ensures at the same time the non-intersection of the two yield surfaces. Furthermore, the first loading, unloading, and reloading stages are treated differently by applying distinct hardening parameters. The main feature of the model is that its constitutive equations can be simply formulated based on the consistency condition for the inner yield surface based on the proposed kinematic hardening law; thereby, this model can be easily implemented in a finite element code using a classic stress integration scheme as for the modified Cam Clay model. The simulation results on the Boom Clay, natural stiff clay, have revealed the relevance of the model: a good agreement has been obtained between simulations and the experimental results from the tests with different stress paths under cyclic loading conditions. In particular, the model can satisfactorily describe the complex case of oedometric conditions where the deviator stress is positive upon loading (compression) but can become negative upon unloading (extension). 相似文献
17.
结构性土颗粒间的胶结使试样剪切破坏最终应力比高于相应重塑土,也限制了试样剪切时体积应变的自由发挥。在考虑结构垮塌为主的结构性土统一硬化(UH)模型基础上,将应力空间中静止的临界状态线扩展为动态的移动临界状态线。据此,通过建立新的屈服面方程并修正剪胀方程,将结构性土统一硬化(UH)模型扩展为胶结结构性土统一硬化(UH)模型。相对于原模型,新模型增加了1个模型参数,即初始胶结应力,反映土颗粒之间的初始胶结作用。通过4种结构性土试验数据与模型预测对照表明：所提模型能够较合理地描述结构性土等向压缩、常规三轴排水与不排水剪切等特性。 相似文献
18.
Yannis F. Dafalias Majid T. Manzari Achilleas G. Papadimitriou 《国际地质力学数值与分析法杂志》2006,30(12):1231-1257
SANICLAY is a new simple anisotropic clay plasticity model that builds on a modification of an earlier model with an associated flow rule, in order to include simulations of softening response under undrained compression following Ko consolidation. Non‐associativity is introduced by adopting a yield surface different than the plastic potential surface. Besides, the isotropic hardening of the yield surface both surfaces evolve according to a combined distortional and rotational hardening rule, simulating the evolving anisotropy. Although built on the general premises of critical state soil mechanics, the model induces a critical state line in the void ratio–mean effective stress space, which is a function of anisotropy. To ease interpretation, the model formulation is presented firstly in the triaxial stress space and subsequently, its multiaxial generalization is developed systematically, in a form appropriate for implementation in numerical codes. The SANICLAY is shown to provide successful simulation of both undrained and drained rate‐independent behaviour of normally consolidated sensitive clays, and to a satisfactory degree of accuracy of overconsolidated clays. The new model requires merely three constants more than those of the modified Cam clay model, all of which are easily calibrated from well‐established laboratory tests following a meticulously presented procedure. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
19.
A hypoplastic constitutive model for clays 总被引：3，自引：0，他引：3
D. Ma&#x;ín 《国际地质力学数值与分析法杂志》2005,29(4):311-336
This paper presents a new constitutive model for clays. The model is developed on the basis of generalized hypoplasticity principles, which are combined with traditional critical state soil mechanics. The positions of the isotropic normal compression line and the critical state line correspond to the Modified Cam clay model, the Matsuoka–Nakai failure surface is taken as the limit stress criterion and the non‐linear behaviour of soils with different overconsolidation ratios is governed by the generalized hypoplastic formulation. The model requires five constitutive parameters, which correspond to the parameters of the Modified Cam clay model and are simple to calibrate on the basis of standard laboratory experiments. This makes the model particularly suitable for practical applications. The basic model may be simply enhanced by the intergranular strain concept, which allows reproducing the behaviour at very small strains. The model is evaluated on the basis of high quality laboratory experiments on reconstituted London clay. Contrary to a reference hypoplastic relation, the proposed model may be applied to highly overconsolidated clays. Improvement of predictions in the small strain range at different stress levels is also demonstrated. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
20.
软土一般具有结构性,试验表明,加荷比会对结构性软土压缩特性有很大的影响,加荷比增加土体剪切趋势,降低土体结构强度,使土体的结构屈服应力值和压缩指数降低。在试验的基础上,给出了考虑加荷比影响的结构性软土地基的沉降计算方法。工程算例表明,在加载终值相同的情况下,如果加荷比过大,就会增大结构性软土地基沉降产生附加沉降,为了减小对软土结构性的破坏而影响土体压缩特性,建议对结构性软土的加荷比不宜采用为1:1以上,宜采用1:0.25或1:0.5。 相似文献