首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 109 毫秒
1.
  相似文献   

2.
Based upon our characterization of three separate stones by electron and X‐ray beam analyses, computed X‐ray microtomography, Raman microspectrometry, and visible‐IR spectrometry, Sutter's Mill is a unique regolith breccia consisting mainly of various CM lithologies. Most samples resemble existing available CM2 chondrites, consisting of chondrules and calcium‐aluminum‐rich inclusion (CAI) set within phyllosilicate‐dominated matrix (mainly serpentine), pyrrhotite, pentlandite, tochilinite, and variable amounts of Ca‐Mg‐Fe carbonates. Some lithologies have witnessed sufficient thermal metamorphism to transform phyllosilicates into fine‐grained olivine, tochilinite into troilite, and destroy carbonates. One finely comminuted lithology contains xenolithic materials (enstatite, Fe‐Cr phosphides) suggesting impact of a reduced asteroid (E or M class) onto the main Sutter's Mill parent asteroid, which was probably a C class asteroid. One can use Sutter's Mill to help predict what will be found on the surfaces of C class asteroids such as Ceres and the target asteroids of the OSIRIS‐REx and Hayabusa 2 sample return missions (which will visit predominantly primitive asteroids). C class asteroid regolith may well contain a mixture of hydrated and thermally dehydrated indigenous materials as well as a significant admixture of exogenous material would be essential to the successful interpretation of mineralogical and bulk compositional data.  相似文献   

3.
Abstract We described lunar meteorite Dhofar 026 (Cohen et al. 2004) and interpreted this rock as a strongly shocked granulitic breccia (or fragmental breccia consisting almost entirely of granulitic‐breccia clasts) that was partially melted by post‐shock heating. Warren et al. (2005) objected to many aspects of our interpretation: they were uncertain whether or not the bulk rock had been shocked; they disputed our identification of the precursor as granulitic breccia; and they suggested that mafic, igneous‐textured globules within the breccia, which we proposed were melted by post‐shock heating, are clasts with relict textures. The major evidence for shock of the bulk rock is the fact that the plagioclase in the lithologic domains that make up 80–90% of the rock is devitrified maskelynite. The major evidence for a granulitic‐breccia precursor is the texture of the olivine‐plagioclase domain that constitutes 40—45% of the rock; Warren et al. apparently overlooked or ignored this lithology. Textures of the mafic, igneous‐textured globules, and especially of the vesicles they contain, demonstrate that these bodies were melted and crystallized in situ. Warren et al. suggested that the rock might have originally been a regolith breccia, but the textural homogeneity of the rock and the absence of solar wind—derived noble gases preclude a regolith‐breccia precursor. Warren et al. classified the rock as an impact‐melt breccia, but they did not identify any fraction that was impact melt.  相似文献   

4.
Abstract— The flux of galactic cosmic rays (GCR) in the solar system appears to change with time. Based on the abundances in iron meteorites of cosmogenic nuclides of different half lives, Lavielle et al. (1999) found that the GCR flux increased in recent times (<100 Ma) by about 38% compared to average flux in the past 150 Ma to 700 Ma ago. A promising technique for calibrating the GCR flux during the past ?50 Ma, based on the 129I and 129Xe pair of nuclides, was discussed earlier (Marti 1986; Murty and Marti 1987). The 129I‐129Xen chronometer provides a shielding‐independent system as long as the exposure geometry remained fixed. It is especially suitable for large iron meteorites (Te‐rich troilite) because of the effects by the GCR secondary neutron component. Although GCR‐produced Xe components were identified in troilites, several issues require clarifications and improvements; some are reported here. We developed a procedure for achieving small Xe extraction blanks which are required to measure indigenous Xe in troilites. The 129Xe and 131Xe excesses (129Xen, 131Xen) due to neutron reactions in Te are correlated in a stepwise release run during the troilite decomposition. Our data show that indigenous Xe in troilite of Cape York has isotopic abundances consistent with ordinary chondritic Xe (OC‐Xe), in contrast to a terrestrial signature which was reported earlier. Two methods are discussed which assess and correct for an interfering radiogenic 129Xer component from extinct 129I. The corrected 129Xen concentration in troilite D4 of Cape York yields a cosmic ray exposure (CRE) age of 82 ± 7 Ma consistent, within uncertainties, with reported data (Murty and Marti 1987; Marti et al. 2004).  相似文献   

5.
Abstract— The Ulasitai iron was recently found about 130 km southeast to the find site of the Armanty (Xinjiang, IIIE) meteorite. It is a coarse octahedrite with a kamacite bandwidth of 1.2 ± 0.2 (0.9–1.8) mm. Plessite is abundant, as is taenite, kamacite, cohenite, and schreibersite with various microstructures. Schreibersite is Ni‐rich (30.5–55.5 wt%) in plessite or coexisting with troilite and daubreelite, in comparison with the coarse laths (20.6–21.2 wt%) between the Widmanstätten pattern plates. The correlation between the center Ni content and the half bandwidth of taenite suggest a cooling rate of ?20 °C/Myr based on simulations. The petrography and mineral chemistry of Ulasitai are similar to Armanty. The bulk samples of Ulasitai were measured, together with Armanty, Nandan (IIICD), and Mundrabilla (IIICD), by inductively coupled plasma atomic emission spectrometry (ICP‐AES) and mass spectrometry (ICP‐MS). The results agree with literature data of the same meteorites, and our analyses of four samples of Armanty (L1, L12, L16, L17) confirm a homogeneous composition (Wasson et al. 1988). The bulk composition of Ulasitai is identical to that of Armanty, both plotting within the IIIE field. We classify Ulasitai as a new IIIE iron and suggest that it pairs with Armanty.  相似文献   

6.
Abstract— –Sayh al Uhaymir (SaU) 169 is a composite lunar meteorite from Oman that consists of polymict regolith breccia (8.44 ppm Th), adhering to impact‐melt breccia (IMB; 32.7 ppm Th). In this contribution we consider the regolith breccia portion of SaU 169, and demonstrate that it is composed of two generations representing two formation stages, labeled II and III. The regolith breccia also contains the following clasts: Ti‐poor to Ti‐rich basalts, gabbros to granulites, and incorporated regolith breccias. The average SaU 169 regolith breccia bulk composition lies within the range of Apollo 12 and 14 soil and regolith breccias, with the closest correspondence being with that of Apollo 14, but Sc contents indicate a higher portion of mare basalts. This is supported by relations between Sm‐Al2O3, FeO‐Cr2O3‐TiO2, Sm/Eu and Th‐K2O. The composition can best be modeled as a mixture of high‐K KREEP, mare basalt and norite/troctolite, consistent with the rareness of anorthositic rocks. The largest KREEP breccia clast in the regolith is identical in its chemical composition and total REE content to the incompatible trace‐element (ITE)‐ rich high‐K KREEP rocks of the Apollo 14 landing site, pointing to a similar source. In contrast to Apollo 14 soil, SaU 169 IMB and SaU 169 KREEP breccia clast, the SaU 169 regolith is not depleted in K/Th, indicating a low contribution of high‐Th IMB such as the SaU 169 main lithology in the regolith. The data presented here indicate the SaU 169 regolith breccia is from the lunar front side, and has a strong Procellarum KREEP Terrane signature.  相似文献   

7.
Abstract— The Ocotillo IAB iron meteorite contains small silicate inclusions consisting of olivine, low-Ca pyroxene, chromian diopside, plagioclase, magnesiochromite, apatite, troilite and metal. The ferromagnesian silicates have a small range of Fe/(Fe + Mg) ratios that are not due to zoning. These phases appear to be not well equilibrated. The FeO content of magnesiochromite is lower than values normally seen in silicate assemblages in IAB iron meteorites. The minerals in Ocotillo are generally like silicate assemblages in other IAB meteorites, covering similar composition ranges and exhibiting a metamorphic (granoblastic) texture. An estimate was made of the bulk composition of Ocotillo silicate inclusions. The bulk composition is close to that of ordinary chondrites with the exception of a deficiency in CaO that might be due to a sampling problem associated with the method used to estimate the bulk composition.  相似文献   

8.
Abstract— We report major element ratios determined for the S‐class asteroid 433 Eros using remote‐sensing x‐ray fluorescence spectroscopy with the near‐Earth asteroid rendezvous Shoemaker x‐ray spectrometer (XRS). Data analysis techniques and systematic errors are described in detail. Data acquired during five solar flares and during two extended “quiet Sun” periods are presented; these results sample a representative portion of the asteroid's surface. Although systematic uncertainties are potentially large, the most internally consistent and plausible interpretation of the data is that Eros has primitive Mg/Si, Al/Si, Ca/Si and Fe/Si ratios, closely similar to H or R chondrites. Global differentiation of the asteroid is ruled out. The S/Si ratio is much lower than that of chondrites, probably reflecting impact‐induced volatilization and/or photo‐ or ion‐induced sputtering of sulfur at the surface of the asteroid. An alternative explanation for the low S/Si ratio is that it reflects a limited degree of melting with loss of an FeS‐rich partial melt. Size‐sorting processes could lead to segregation of Fe‐Ni metal from silicates within the regolith of Eros; this could indicate that the Fe/Si ratios determined by the x‐ray spectrometer are not representative of the bulk Eros composition.  相似文献   

9.
A computer simulation of the sputtering of lunar soil by solar wind protons was performed with the TRIM program. The rate of the sputtering-induced erosion of regolith particles was shown to be less than 0.2 Å per year. A preferential sputtering of Ca, Mg, and O was found along with a less intense sputtering of Fe, Si, and Ti. However, with no other selection mechanisms, surface concentrations of the atoms would differ from the volume ones by no more than 6 %. The enrichment of rims of regolith particles with iron occurs as a result of selective removal of lighter atoms from the lunar surface because of different energies of escape from the Moon's gravity. The energy distributions proved to be the same for all sorts of the sputtered atoms, except for implanted hydrogen; thus, a greater fraction of the atoms left on the lunar surface corresponds to heavier elements. According to simulation results, the concentration of reduced iron observed in the mature regolith could be attained during the time of regolith particle exposure to the present flux of solar wind (105 years). Thus, sputtering can provide the concentration of Fe0 observed in regolith. On periphery of a cloud of impact vapor the temperature is too low for an irreversible selective removal of evaporation products; thus, a meteoritic bombardment contributes to the formation of composition of the rims of regolith particles mainly through enrichment of the rims with elements from the bulk of the particles. The estimates of fluxes of backscattered solar wind protons and of sputtered protons, earlier implanted to the regolith, demonstrated that their contribution to the proton flux near the poles is only 104 cm–2 s–1. This is by two orders of magnitude smaller than the proton flux from the Earth's magnetosphere which is, therefore, the main source of protons for permanently shaded polar craters of the Moon.  相似文献   

10.
J. Warell 《Icarus》2003,161(2):199-222
Disk-resolved reflectance spectra of the surface of Mercury (longitudes 240-300°), obtained in the visual (vis) and near-infrared (NIR) spectral region, are presented and analyzed. The observations were made at the 2.6-m Nordic Optical Telescope with the ALFOSC low-resolution spectrograph on 20 and 22 June 1999 in the wavelength range 520-970 nm with a footprint size of 700 km on the mid-disk of Mercury. A method which enables more accurate correction for telluric line absorptions and atmospheric extinction than that applied on previously published vis-NIR spectra of Mercury is introduced. The resulting reflectance spectra are remarkably linear, lack significant absorption features, and have optical slopes comparable to remotely sensed lunar pure anorthosites. The relation between spectral slope and photometric geometry found by Warell (2002, Icarus 156, 313-317) is confirmed and is explained as caused by strongly backscattering particles with embedded submicroscopic metallic iron in a mature regolith. With the theoretical maturation model of Hapke (2001, J. Geophys. Res. 106 (E5), 10039-10073) an abundance of 0.05-0.3 wt% submicroscopic metallic iron in the regolith for silicate grain sizes in the range 10-80 μm is determined, implying a ferrous iron content in mafic minerals intrinsically lower than that of the lunar highlands. A binary crustal composition model with anorthite linearly mixed with pyroxene provides better spectral fits than a pure anorthitic composition. Comparison with mature lunar pure anorthosite spectra yields a confident upper limit to the FeO content of 3 wt% under the assumption that the surfaces are similarly matured, but this figure probably represents a considerable overestimate. The average mercurian regolith does not seem to be substantially more weathered than the most mature lunar highland soils in terms of abundance of submicroscopic metallic iron, indicating that a steady-state maturation level has been reached. However, the strong relation between optical spectral slope and photometric geometry may imply that the majority of regolith particles are more fine-grained than their lunar counterparts and that the regolith is admixed with complex agglutinate weathering products which are more abundant and more transparent than those of the lunar highlands. This is consistent with more energetic impacts and a higher rate of impact melt production in an iron-poor regolith. An observed relation between the spectral slope and latitude provides evidence that the Ostwald ripening process may be operating at equatorial latitudes on Mercury.  相似文献   

11.
Abstract— New data for lunar meteorites and a synthesis of literature data have significant implications for the interpretation of global Th data and for the Moon's bulk composition. As presently calibrated (Prettyman et al. 2002), the Lunar Prospector gamma‐ray data imply that the average global surface Th = 1.58 μg/g. However, that calibration yields implausibly high concentrations for the three most Th‐poor documented sampling sites, it extrapolates to a nonzero Lunar Prospector Th, ?0.7 μg/g, at zero sample Th, and it results in a misfit toward too‐high Th when compared with the global regolith Th spectrum as constrained using mainly lunaite regolith breccias. Another problem is manifested by Th versus K systematics. Ground truth data plot consistently to the high‐Th/K side of the Prospector data trend, offset by a factor of 1.2. A new calibration is proposed that represents a compromise between the Th levels indicated by ground truth constraints and the Prettyman et al. (2002) calibration. Conservatively assuming that the Th versus K issue is mostly a K problem, the average global surface Th is estimated to be ?1.35 μg/g. The Moon's remarkable global asymmetry in KREEP abundance is even more pronounced than previously supposed. The surface Th concentration ratio between the hemisphere antipodal to the Procellarum basin and the hemisphere centered on Procellarum is reduced to 0.24 in the new calibration. This extreme disparity is most simply interpreted as a consequence of Procellarum's origin at a time when the Moon still contained at least a thin residual layer of a global magma ocean. Allowing for diminution of Th with depth, the extrapolated bulk crustal Th is ?0.73 μg/g. Further extrapolation to bulk Moon Th yields ?0.07 μg/g, which is nearly identical to the consensus estimate for Earth's primitive mantle. Assuming chondritic proportionality among refractory lithophile elements implies Al2O3 of approximately 3.8 wt%. The Moon's bulk mantle mg ratio is only weakly constrained by seismic and mare‐basaltic data. KREEP‐and mare‐free lunaite regolith samples, other thoroughly polymict lunar meteorites, and a few KREEP‐free Apollo highland samples manifest a remarkable anticorrelation on a plot of Al2O3 versus mg. This trend implies that an important component of the Moon is highly magnesian. The bulk Moon is inferred to have an Earth‐like oxide mg ratio of ?87–88 mol%. The close resemblance between the bulk Moon and Earth's primitive mantle extends to moderately volatile elements, most clearly Mn. Unless major proportions of Cr and V are sequestered into deep mantle spinel, remarkably Earth‐like depletions (versus chondrites) are also inferred for bulk Moon Cr and V.  相似文献   

12.
We analyzed He and Ne in chromite grains from the regolith breccia Ghubara (L5), to compare it with He and Ne in sediment‐dispersed extraterrestrial chromite (SEC) grains from mid‐Ordovician sediments. These SEC grains arrived on Earth as micrometeorites in the aftermath of the L chondrite parent body (LCPB) breakup event, 470 Ma ago. A significant fraction of them show prolonged exposure to galactic cosmic rays for up to several 10 Ma. The majority of the cosmogenic noble gases in these grains were probably acquired in the regolith of the LCPB (Meier et al. 2010 ). Ghubara, an L chondritic regolith breccia with an Ar‐Ar shock age of 470 Ma, is a sample of that regolith. We find cosmic‐ray exposure ages of up to several 10 Ma in some Ghubara chromite grains, confirming for the first time that individual chromite grains with such high exposure ages indeed existed in the LCPB regolith, and that the >10 Ma cosmic‐ray exposure ages found in recent micrometeorites are thus not necessarily indicative of an origin in the Kuiper Belt. Some Ghubara chromite grains show much lower concentrations of cosmogenic He and Ne, indicating that the 4π (last‐stage) exposure age of the Ghubara meteoroid lasted only 4–6 Ma. This exposure age is considerably shorter than the 15–20 Ma suggested before from bulk analyses, indicating that bulk samples have seen regolith pre‐exposure as well. The shorter last‐stage exposure age probably links Ghubara to a small peak of 40Ar‐poor L5 chondrites of the same exposure age. Furthermore, and quite unexpectedly, we find a Ne component similar to presolar Ne‐HL in the chromite grains, perhaps indicating that some presolar Ne can be preserved even in meteorites of petrologic type 5.  相似文献   

13.
The lunar regolith contains a variety of chemically reduced phases of interest to planetary scientists and the most common, metallic iron, is generally ascribed to space weathering processes (Lucey et al. 2006 ). Reports of silicon metal and iron silicides, phases indicative of extremely reducing conditions, in lunar samples are rare (Anand et al. 2004 ; Spicuzza et al. 2011 ). Additional examples of Fe‐silicides have been identified in a survey of particles from Apollo 16 sample 61501,22. Herein is demonstrated the utility of low keV electron probe microanalysis (EPMA), using the Fe Ll X‐ray line, to analyze these submicron phases, and the necessity of accounting for carbon contamination. We document four Fe‐Si and Si0 minerals in lunar regolith return material. The new Fe‐Si samples have a composition close to (Fe,Ni)3Si, whereas those associated with Si0 are close to FeSi2 and Fe3Si7. Atom probe tomography of (Fe,Ni)3Si shows trace levels of C (60 ppma and nanodomains enriched in C, Ni, P, Cr, and Sr). These reduced minerals require orders of magnitude lower oxygen fugacity and more reducing conditions than required to form Fe0. Documenting the similarities and differences in these samples is important to constrain their formation processes. These phases potentially formed at high temperatures resulting from a meteorite impact. Whether carbon played a role in achieving the lower oxygen fugacities—and there is evidence of nearby carbonaceous chondritic material—it remains to be proven that carbon was the necessary component for the unique existence of these Si0 and iron silicide minerals.  相似文献   

14.
Abstract— We report here the petrography, mineralogy, and geochemistry of lunar meteorite Sayh al Uhaymir 300 (SaU 300). SaU 300 is dominated by a fine‐grained crystalline matrix surrounding mineral fragments (plagioclase, pyroxene, olivine, and ilmenite) and lithic clasts (mainly feldspathic to noritic). Mare basalt and KREEPy rocks are absent. Glass melt veins and impact melts are present, indicating that the rock has been subjected to a second impact event. FeNi metal and troilite grains were observed in the matrix. Major element concentrations of SaU 300 (Al2O3 21.6 wt% and FeO 8.16 wt%) are very similar to those of two basalt‐bearing feldspathic regolith breccias: Calcalong Creek and Yamato (Y‐) 983885. However, the rare earth element (REE) abundances and pattern of SaU 300 resemble the patterns of feldspathic highlands meteorites (e.g., Queen Alexandra Range (QUE) 93069 and Dar al Gani (DaG) 400), and the average lunar highlands crust. It has a relatively LREE‐enriched (7 to 10 x CI) pattern with a positive Eu anomaly (?11 x CI). Values of Fe/Mn ratios of olivine, pyroxene, and the bulk sample are essentially consistent with a lunar origin. SaU 300 also contains high siderophile abundances with a chondritic Ni/Ir ratio. SaU 300 has experienced moderate terrestrial weathering as its bulk Sr concentration is elevated compared to other lunar meteorites and Apollo and Luna samples. Mineral chemistry and trace element abundances of SaU 300 fall within the ranges of lunar feldspathic meteorites and FAN rocks. SaU 300 is a feldspathic impact‐melt breccia predominantly composed of feldspathic highlands rocks with a small amount of mafic component. With a bulk Mg# of 0.67, it is the most mafic of the feldspathic meteorites and represents a lunar surface composition distinct from any other known lunar meteorites. On the basis of its low Th concentration (0.46 ppm) and its lack of KREEPy and mare basaltic components, the source region of SaU 300 could have been within a highland terrain, a great distance from the Imbrium impact basin, probably on the far side of the Moon.  相似文献   

15.
Abstract— Abundances and isotopic compositions of noble gases in metal and graphite of the Bohumilitz IAB iron meteorite were measured. The abundance ratios of spallogenic components in metal reveal a 3He deficiency which is due to the diffusive loss of parent isotopes, that is, tritium (Tilles, 1963; Schultz, 1967). The diffusive loss likely has been induced by thermal heating by the Sun during cosmic‐ray exposure (～160 Ma; Lavielle et al, 1999). Thermal process such as impact‐induced partial loss may have affected the isotopic composition of spallogenic Ne. The 129Xe/131Xe ratio of cosmogenic components in the metal indicates an enhanced production of epi‐thermal neutrons. The abundance ratios of spallogenic components in the graphite reveal that it contained small amounts of metal and silicates. The isotopic composition of heavy noble gases in graphite itself was obtained from graphite treated with HF/HCl. The isotopic composition of the etched graphite shows that it contains two types of primordial Xe (i.e., Q‐Xe and El Taco Xe). The isotopic heterogeneity preserved in the Bohumilitz graphite indicates that the Bohumilitz graphite did not experience any high‐temperature event and, consequently, must have been emplaced into the metal at subsolidus temperatures. This situation is incompatible with an igneous model as well as the impact melting models for the IAB‐IIICD iron meteorites as proposed by Choi et al. (1995) and Wasson et al (1980).  相似文献   

16.
Abstract— Knowledge of regolith depth structure is important for a variety of studies of the Moon and other bodies such as Mercury and asteroids. Lunar regolith depths have been estimated using morphological techniques (i.e., Quaide and Oberbeck 1968; Shoemaker and Morris 1969), crater counting techniques (Shoemaker et al. 1969), and seismic studies (i.e., Watkins and Kovach 1973; Cooper et al. 1974). These diverse methods provide good first order estimates of regolith depths across large distances (tens to hundreds of kilometers), but may not clearly elucidate the variability of regolith depth locally (100 m to km scale). In order to better constrain the regional average depth and local variability of the regolith, we investigate several techniques. First, we find that the apparent equilibrium diameter of a crater population increases with an increasing solar incidence angle, and this affects the inferred regolith depth by increasing the range of predicted depths (from ～7–15 m depth at 100 m equilibrium diameter to ～8–40 m at 300 m equilibrium diameter). Second, we examine the frequency and distribution of blocky craters in selected lunar mare areas and find a range of regolith depths (8–31 m) that compares favorably with results from the equilibrium diameter method (8–33 m) for areas of similar age (～2.5 billion years). Finally, we examine the utility of using Clementine optical maturity parameter images (Lucey et al. 2000) to determine regolith depth. The resolution of Clementine images (100 m/pixel) prohibits determination of absolute depths, but this method has the potential to give relative depths, and if higher resolution spectral data were available could yield absolute depths.  相似文献   

17.
Meteorites ejected from the surface of the Moon as a result of impact events are an important source of lunar material in addition to Apollo and Luna samples. Here, we report bulk element composition, mineral chemistry, age, and petrography of Miller Range (MIL) 090036 and 090070 lunar meteorites. MIL 090036 and 090070 are both anorthositic regolith breccias consisting of mineral fragments and lithic clasts in a glassy matrix. They are not paired and represent sampling of two distinct regions of the lunar crust that have protoliths similar to ferroan anorthosites. 40Ar‐39Ar chronology performed on two subsplits of MIL 090070,33 (a pale clast impact melt and a dark glassy melt component) shows that the sample underwent two main degassing events, one at ~3.88 Ga and another at ~3.65 Ga. The cosmic ray exposure data obtained from MIL 090070 are consistent with a short (~8–9 Ma) exposure close to the lunar surface. Bulk‐rock FeO, TiO2, and Th concentrations in both samples were compared with 2‐degree Lunar Prospector Gamma Ray Spectrometer (LP‐GRS) data sets to determine areas of the lunar surface where the regolith matches the abundances observed on the sample. We find that MIL 090036 bulk rock is compositionally most similar to regolith surrounding the Procellarum KREEP Terrane, whereas MIL 090070 best matches regolith in the feldspathic highlands terrane on the lunar farside. Our results suggest that some areas of the lunar farside crust are composed of ferroan anorthosite, and that the samples shed light on the evolution and impact bombardment history of the ancient lunar highlands.  相似文献   

18.
Photometric anomalies of the lunar surface studied with SMART-1 AMIE data   总被引：2，自引：1，他引：1  
We present new results from the mapping of lunar photometric function parameters using images acquired by the spacecraft SMART-1 (European Space Agency). The source data for selected lunar areas imaged by the AMIE camera of SMART-1 and the data processing are described. We interpret the behavior of photometric function in terms of lunar regolith properties. Our study reveals photometric anomalies on both small (sub-kilometer) and large (tens of kilometers) scales. We found the regolith mesoscale roughness of lunar swirls to be similar in Mare Marginis, Mare Ingenii, and the surrounding terrains. Unique photometric properties related to peculiarities of the millimeter-scale regolith structure for the Reiner Gamma swirl are confirmed. We identified several impact craters of subkilometer sizes as the source of photometric anomalies created by an increase in mesoscale roughness within the proximal crater ejecta zones. The extended ray systems reveal differences in the photometric properties between proximal and distant ejecta blankets. Basaltic lava flows within Mare Imbrium and Oceanus Procellarum indicate higher regolith porosity for the redder soils due to differences in the chemical composition of lavas.  相似文献   

19.
Abstract— Metal‐troilite textures are examined in metamorphosed and impact‐affected ordinary chondrites to examine the response of these phases to rapid changes in temperature. Complexly intergrown metal‐troilite textures are shown to form in response to three different impact‐related processes. (1) During impacts, immiscible melt emulsions form in response to spatially focused heating. (2) Immediately after impact events, re‐equilibration of heterogeneously distributed heat promotes metamorphism adjacent to zones of maximum impact heating. Where temperatures exceed ～850 ° C, this post‐impact metamorphism results in melting of conjoined metal‐troilite grains in chondrites that were previously equilibrated through radiogenic metamorphism. When the resulting Fe‐Ni‐S melt domains crystallize, a finely intergrown mixture of troilite and metal forms, which can be zoned with kamacite‐rich margins and taenite‐rich cores. (3) At lower temperatures, post‐impact metamorphism can also cause liberation of sulfur from troilite, which migrates into adjacent Fe‐Ni metal, allowing formation of troilite and occasionally copper within the metal during cooling. Because impact events cause heating within a small volume, post‐impact metamorphism is a short duration event (days to years) compared with radiogenic metamorphism (>106 years). The fast kinetics of metal‐sulfide reactions allows widespread textural changes in conjoined metal‐troilite grains during post‐impact metamorphism, whereas the slow rate of silicate reactions causes these to be either unaffected or only partially annealed, except in the largest impact events. Utilizing this knowledge, information can be gleaned as to whether a given meteorite has suffered a post‐impact thermal overprint, and some constraints can be placed on the temperatures reached and duration of heating.  相似文献   

20.
This study presents the petrography, mineralogy, and bulk composition of lunar regolith breccia meteorite Northwest Africa (NWA) 7948. We identify a range of lunar lithologies including basaltic clasts (very low-titanium and low-titanium basalts), feldspathic lithologies (ferroan anorthosite, magnesian-suite rock, and alkali suite), granulites, impact melt breccias (including crystalline impact melt breccias, clast-bearing impact melt breccias, and glassy melt breccias), as well as regolith components (volcanic glass and impact glass). A compositionally unusual metal-rich clast was also identified, which may represent an impact melt lithology sourced from a unique Mg-suite parent rock. NWA 7948 has a mingled bulk rock composition (Al2O3 = 21.6 wt% and FeO = 9.4 wt%) and relatively low concentrations of incompatible trace elements (e.g., Th = 1.07 ppm and Sm = 2.99 ppm) compared with Apollo regolith breccias. Comparing the bulk composition of the meteorite with remotely sensed geochemical data sets suggests that the sample was derived from a region of the lunar surface distal from the nearside Th-rich Procellarum KREEP Terrane. Our investigations suggest that it may have been ejected from a nearside highlands-mare boundary (e.g., around Mare Crisium or Orientale) or a cryptomare region (e.g., Schickard-Schiller or Mare smythii) or a farside highlands-mare boundary (e.g., Mare Australe, Apollo basin in the South Pole–Aitken basin). The distinctive mineralogical and geochemical features of NWA 7948 suggest that the meteorite may represent lunar material that has not been reported before, and indicate that the lunar highlands exhibit wide geological diversity.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号