首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Quantifying the topography of rivers and their associated bedforms has been a fundamental concern of fluvial geomorphology for decades. Such data, acquired at high temporal and spatial resolutions, are increasingly in demand for process‐oriented investigations of flow hydraulics, sediment dynamics and in‐stream habitat. In these riverine environments, the most challenging region for topographic measurement is the wetted, submerged channel. Generally, dry bed topography and submerged bathymetry are measured using different methods and technology. This adds to the costs, logistical challenges and data processing requirements of comprehensive river surveys. However, some technologies are capable of measuring the submerged topography. Through‐water photogrammetry and bathymetric LiDAR are capable of reasonably accurate measurements of channel beds in clear water. While the cost of bathymetric LiDAR remains high and its resolution relatively coarse, the recent developments in photogrammetry using Structure from Motion (SfM) algorithms promise a fundamental shift in the accessibility of topographic data for a wide range of settings. Here we present results demonstrating the potential of so called SfM‐photogrammetry for quantifying both exposed and submerged fluvial topography at the mesohabitat scale. We show that imagery acquired from a rotary‐winged Unmanned Aerial System (UAS) can be processed in order to produce digital elevation models (DEMs) with hyperspatial resolutions (c. 0.02 m) for two different river systems over channel lengths of 50–100 m. Errors in submerged areas range from 0.016 m to 0.089 m, which can be reduced to between 0.008 m and 0.053 m with the application of a simple refraction correction. This work therefore demonstrates the potential of UAS platforms and SfM‐photogrammetry as a single technique for surveying fluvial topography at the mesoscale (defined as lengths of channel from c.10 m to a few hundred metres). Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

2.
The effects of large floods on river morphology are variable and poorly understood. In this study, we apply multi‐temporal datasets collected with small unmanned aircraft systems (UASs) to analyze three‐dimensional morphodynamic changes associated with an extreme flood event that occurred from 19 to 23 June 2013 on the Elbow River, Alberta. We documented reach‐scale spatial patterns of erosion and deposition using high‐resolution (4–5 cm/pixel) orthoimagery and digital elevation models (DEMs) produced from photogrammetry. Significant bank erosion and channel widening occurred, with an average elevation change of ?0.24 m. The channel pattern was reorganized and overall elevation variation increased as the channel adjusted to full mobilization of most of the bed surface sediments. To test the extent to which geomorphic changes can be predicted from initial conditions, we compared shear stresses from a two‐dimensional hydrodynamic model of peak discharge to critical shear stresses for bed surface sediment sizes. We found no relation between modeled normalized shear stresses and patterns of scour and fill, confirming the complex nature of sediment mobilization and flux in high‐magnitude events. However, comparing modeled peak flows through the pre‐ and post‐flood topography showed that the flood resulted in an adjustment that contributes to overall stability, with lower percentages of bed area below thresholds for full mobility in the post‐flood geomorphic configuration. Overall, this work highlights the potential of UAS‐based remote sensing for measuring three‐dimensional changes in fluvial settings and provides a detailed analysis of potential relationships between flood forces and geomorphic change. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

3.
Unoccupied aerial systems (UASs) are frequently used in the field of fluvial geomorphology due to their capabilities for observing the continuum rather than single sample points. We introduce a (semi-)automatic workflow to measure river bathymetry and surface flow velocities of entire river reaches at high resolution, based on UAS videos and imagery. Video frame filtering improved the visibility of the riverbed using frame co-registration and averaging with a median filter. Subsequently, these video frames were incorporated with still images acquired by UASs into a structure from motion (SfM) photogrammetry approach to reconstruct the camera poses (i.e. positions and orientations) and the 3D point cloud of the river reach. The heights of submerged points were further processed using small-angle and multi-view refraction correction approaches to account for the refraction impact. The flow velocity pattern of the river surface was measured using the estimated camera pose from SfM, the reconstructed bathymetric point cloud and the co-registered video frames in combination with image velocimetry analysis. Finally, discharge was estimated at selected cross-sections, considering the average surface velocity and the bathymetry. Three case studies were considered to assess the performance of the workflow under different environmental conditions. The studied river reaches spanned a length between 0.15 and 1 km. The bathymetry was reconstructed with average deviations to RTK-GNSS point measurements as low as 1 cm with a standard deviation of 6 cm. If frames were processed with the median filter, the number of underwater points increased by up to 21%. The image-based surface velocities revealed an average deviation to reference measurements between 0.05 and 0.08 m s−1. The image-based discharge was estimated with deviations to ADCP references of up to 5%, however this was sensitive to errors in water-level retrieval. The output of our workflow can provide a valuable input to hydro-morphological models.  相似文献   

4.
Remote sensing technology has brought great convenience to our understanding of the macroscopic geological features since its inception. Especially, great progress has been made in manufacturing techniques of remote sensing platforms and sensors since the mid 20th century, and a huge number of global remote sensing data have been acquired. The quality of the data has been greatly improved based on the sensor's development. This article briefly reviews the processes of development of the remote sensing technology, elaborates on several satellites' parameters which have important significance for active tectonics interpretation, such as Landsat, SPOT, QuickBird, etc., and systematically reviews the progress in optical image interpretation made with the improvement of image resolution. The paper also briefly introduces the latest optical imaging correlation techniques, the detailed geomorphological mapping techniques based high-resolution satellite images, and the perspective of application of the remote sensing technology to active tectonics research.  相似文献   

5.
The study investigates the capability of coarse resolution synthetic aperture radar (SAR) imagery to support flood inundation models. A hydraulic model of a 98‐km reach of the River Po (Northern Italy) was calibrated on the October 2000 high‐magnitude flood event with extensive and high‐quality field data. During the June 2008, low‐magnitude flood event a SAR image was acquired and processed in near real time (NRT) in order to provide adequate data for quick verification and recalibration of the hydraulic model. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

6.
Measurement of riverbed material grain sizes is now a routine part of fieldwork in fluvial geomorphology and lotic ecology. In the last decade, several authors have proposed remote sensing approaches of grain size measurements based on terrestrial and aerial imagery. Given the current rise of small unmanned aerial system (sUAS) applications in geomorphology, there is now increasing interest in the application of these remotely sensed grain size mapping methods to sUAS imagery. However, success in this area has been limited owing to two fundamental problems: lack of constraint of image scale for sUAS imagery and blurring effects in sUAS images and resulting orthomosaics. In this work, we solve the former by showing that SfM‐photogrammetry can be used in a direct georeferencing (DG) workflow (i.e. with no ground validation) in order to predict image scale within margins of 3%. We then propose a novel approach of robotic photosieving of dry exposed riverbed grains that relies on near‐ground images acquired from a low‐cost sUAS and which does not require the presence of ground control points or visible scale objects. We demonstrate that this absence of scale objects does not affect photosieving outputs thus resulting in a low‐cost and efficient sampling method for surficial grains. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

7.
Soil moisture (SM) can be retrieved from active microwave (AM), passive microwave (PM) and thermal infrared (TIR) observations, each having unique spatial and temporal coverages. A limitation of TIR‐based retrievals is a dependence on cloud‐free conditions, whereas microwave retrievals are almost all weather proof. A downside of SM retrievals from PM is the coarse spatial resolution. Although SM retrievals at coarse spatial resolution proved to be valuable for global‐scale and continental‐scale studies, their value for regional‐scale studies remains limited. To increase the use of SM retrievals from PM observations, an existing method to enhance their spatial resolution was applied. We present an intercomparison study over the Iberian Peninsula for three SM products on two different spatial sampling grids. The remotely sensed SM products were also compared with in situ observations from the Remedhus network. Variations between ground data and satellite‐based SM are observed; all three remotely sensed SM products show good agreement to the ground observations. The comparison shows that these ground observations and satellite data are consistent, based on the correlation coefficient (R) and root mean square error (RMSE). The remotely sensed products were intercompared after sampling at 25 × 25 km2 and after applying the smoothing filter‐based intensity modulation (SFIM) downscaling technique at 10 × 10 km2 grids. After the application of the SFIM technique, the SM retrievals from PM observations show better agreement with the other remotely sensed SM products for approximately 40% of the study area. For another 40% of the study area, we found a similar agreement between these product combinations, whereas in extreme environments, both arid and densely vegetated regions, the agreement decreases after the application of the SFIM technique. Agreement between retrievals of absolute SM content from PM and TIR observations is generally high (R = 0.77 for semi‐arid areas). This study enhances our understanding of the remotely sensed SM products for improvements of SM retrieval and merging strategies. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
Four SPOT images, one panchromatic and three multispectral, were studied to evaluate their usefulness for hydrological mapping in an arid environment. Simple visual methods of interpretation were used to plot the drainage network independently from each test image. The results were compared with the drainage network shown on the topographic map of the area. Results show that with the panchromatic image, over 90 per cent of the map content could be discerned, identified, and plotted. The accuracy of plotting the drainage system from the multispectral images seems to depend on the season in which data had been acquired. However, in all cases, the success rate is not less than 70 per cent. Comparison with Landsat Thematic Mapper (TM) imagery showed that SPOT system is superior in hydrological mapping.  相似文献   

9.
In the last decade advances in surveying technology have opened up the possibility of representing topography and monitoring surface changes over experimental plots (<10 m2) in high resolution (~103 points m‐1). Yet the representativeness of these small plots is limited. With ‘Structure‐from‐Motion’ (SfM) and ‘Multi‐View Stereo’ (MVS) techniques now becoming part of the geomorphologist's toolkit, there is potential to expand further the scale at which we characterise topography and monitor geomorphic change morphometrically. Moving beyond previous plot‐scale work using Terrestrial Laser Scanning (TLS) surveys, this paper validates robustly a number of SfM‐MVS surveys against total station and extensive TLS data at three nested scales: plots (<30 m2) within a small catchment (4710 m2) within an eroding marl badland landscape (~1 km2). SfM surveys from a number of platforms are evaluated based on: (i) topography; (ii) sub‐grid roughness; and (iii) change‐detection capabilities at an annual scale. Oblique ground‐based images can provide a high‐quality surface equivalent to TLS at the plot scale, but become unreliable over larger areas of complex terrain. Degradation of surface quality with range is observed clearly for SfM models derived from aerial imagery. Recently modelled ‘doming’ effects from the use of vertical imagery are proven empirically as a piloted gyrocopter survey at 50m altitude with convergent off‐nadir imagery provided higher quality data than an Unmanned Aerial Vehicle (UAV) flying at the same height and collecting vertical imagery. For soil erosion monitoring, SfM can provide data comparable with TLS only from small survey ranges (~5 m) and is best limited to survey ranges ~10–20 m. Synthesis of these results with existing validation studies shows a clear degradation of root‐mean squared error (RMSE) with survey range, with a median ratio between RMSE and survey range of 1:639, and highlights the effect of the validation method (e.g. point‐cloud or raster‐based) on the estimated quality. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

10.
Photogrammetric monitoring of small streams under a riparian forest canopy   总被引：2，自引：0，他引：2  
The recent advent of digital photogrammetry has enabled the modeling and monitoring of river beds at relatively high spatial resolution (0·01 to 1 m) through the extraction of digital elevation models (DEMs). The traditional approach to image capture has been to mount a metric camera to an aircraft, although non‐metric cameras have been mounted to a variety of novel aerial platforms to acquire river‐based imagery (e.g. helicopters, radio‐controlled motorized vehicles, tethered blimps and balloons). However, most of these techniques are designed to acquire imagery at flying heights above the riparian tree canopy. In relatively narrow channels (e.g. <20 m bankfull width), streamside trees can obscure the channel and limit continuous photogrammetric data acquisition of both the channel bed and banks, while still providing useful information regarding the riparian canopy and even spot elevations of the channel. This paper presents a technique for the capture and analysis of close‐range photogrammetric data acquired from a vertically mounted non‐metric camera suspended 10 m above the channel bed by a unipod. The camera is positioned under the riparian forest canopy so that the channel bed can be imaged without obstruction. The system is portable and permits relatively rapid image acquisition over rough terrain and in dense forest. The platform was used to generate DEMs with a nominal ground resolution of 0·03 m. DEMs generated from this platform required post‐possessing to either adjust or eliminate erroneous cells introduced by the extraction process, overhanging branches, and by the effects of refraction at the air–water interface for submerged portions of the channel bed. The vertical precision in the post‐processed surface generally ranged from ± 0·01 to 0·1 m depending on the quality of triangulation and the characteristics of the surface being imaged. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

11.
Hydrological modelling of mesoscale catchments is often adversely affected by a lack of adequate information about specific site conditions. In particular, digital land cover data are available from data sets which were acquired on a European or a national scale. These data sets do not only exhibit a restricted spatial resolution but also a differentiation of crops and impervious areas which is not appropriate to the needs of mesoscale hydrological models. In this paper, the impact of remote sensing data on the reliability of a water balance model is investigated and compared to model results determined on the basis of CORINE (Coordination of Information on the Environment) Land Cover as a reference. The aim is to quantify the improved model performance achieved by an enhanced land cover representation and corresponding model modifications. Making use of medium resolution satellite imagery from SPOT, LANDSAT ETM+ and ASTER, detailed information on land cover, especially agricultural crops and impervious surfaces, was extracted over a 5-year period (2000–2004). Crop-specific evapotranspiration coefficients were derived by using remote sensing data to replace grass reference evapotranspiration necessitated by the use of CORINE land cover for rural areas. For regions classified as settlement or industrial areas, degrees of imperviousness were derived. The data were incorporated into the hydrological model GROWA (large-scale water balance model), which uses an empirical approach combining distributed meteorological data with distributed site parameters to calculate the annual runoff components. Using satellite imagery in combination with runoff data from gauging stations for the years 2000–2004, the actual evapotranspiration calculation in GROWA was methodologically extended by including empirical crop coefficients for actual evapotranspiration calculations. While GROWA originally treated agricultural areas as homogeneous, now a consideration and differentiation of the main crops is possible. The accuracy was determined by runoff measurements from gauging stations. Differences in water balances resulting from the use of remote sensing data as opposed to CORINE were analysed in this study using a representative subcatchment. Resulting Nash–Sutcliff model efficiencies improved from 0.372 to 0.775 and indicate that the enhanced model can produce thematically more accurate and spatially more detailed local water balances. However, the proposed model enhancements by satellite imagery have not exhausted the full potential of water balance modelling, for which a higher temporal resolution is required.  相似文献   

12.
It has recently been demonstrated that surficial grain sizes in fluvial environments could be derived with automated methods applied to airborne digital imagery having a ground resolution of 3 cm. This letter seeks to further examine the potential of digital imagery for automated grain size mapping. In order to broaden the application of automated grain size mapping from airborne imagery, the effect of image resolution needs further study. Automated grain size mapping was attempted on an airborne digital image with a ground resolution of 10 cm. The results show that meaningful grain size information can be derived from 10 cm imagery. However, the ground resolution of the image acts as a size threshold below which no grain size information is detectable. Therefore, these results strongly suggest that future applications of automated grain size mapping will always be dependent on the ground resolution made available by the technology in use at the time of image acquisition. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

13.
The increasing popularity of remote sensing techniques has created numerous options for researchers seeking spatial datasets, especially digital elevation models (DEMs), for geomorphic investigations. This yields an important question regarding what DEM resolution is most appropriate when answering questions of geomorphic significance. The highest possible resolution is not always the best choice for a particular research aim, and DEM resolution should be tailored to fit both the scale of investigation and the simplicity/complexity of modelling processes applied to the dataset. We find that DEM resolution has a significant effect on a simple model of bed load sediment connectivity in the Lockyer Valley, Queensland. We apply a simple bed load transport threshold to catchment DEMs at three different resolutions – 1 m, 5 m, and 25 m. We find that using a 1 m resolution DEM generates numerous disconnections along tributary channel networks that underestimates the sediment contributing area, i.e. effective catchment area (ECA), of seven tributary basins of Lockyer Creek. Utilizing a coarser (lower‐resolution) DEM helps eliminate erroneous disconnections, but can reduce the detail of stream network definition. We find that the 25 m resolution DEM provides the best measure of ECA for comparing sediment connectivity between tributary catchments. The utility of simple models and coarse‐resolution datasets is important for undertaking large, catchment‐scale geomorphic investigations. As catchment‐scale investigations are becoming increasingly entwined with river management and rehabilitation efforts, scientists need not embrace an ‘out with the old’ philosophy. Simple models and coarse‐resolution datasets can help better integrate geomorphic research with management strategies and provide inexpensive and quick first‐order insights into catchment‐scale processes that can help focus future management efforts. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

14.
Small unoccupied aerial systems (sUASs) are increasingly applied to study hydrologic processes and water quality. Here, we evaluate a novel application of sUAS to stream turbidity monitoring, with the goal of extending analyses implemented with satellite remote sensing to enable high resolution, rapid collection of turbidity imagery along smaller waterbodies. To accomplish this, we collected multispectral imagery using two sUAS platforms under a range of environmental conditions along a local creek in Syracuse, NY. In addition, we collected in situ turbidity observations immediately after each flight along several transects along the creek, as well as within a clear plume created by a natural spring entering the main channel of the creek. The in situ turbidity values were compared with the mean and standard deviation of several single‐band and multiband indices extracted along similar transects from the sUAS flights. On the basis of data collected across several flights, we found optical metrics obtained from multispectral imagery correlated well with in situ turbidity measurements. Though many optical metrics yielded strong relationships considering only values within the main channel, values associated with the red band were strongly related to turbidity estimates from the main channel as well as lower turbidity values observed in the spring plume. Although there are still limitations of this approach associated with variable field conditions, results from this proof of concept analysis show that sUASs offer a promising avenue for cost‐effective turbidity monitoring.  相似文献   

15.
Accurate and reliable methods for quantifying grain size are important for river science, management and in various other sedimentological settings. Remote sensing offers methods of quantifying grain size, typically providing; (a) coarse outputs (c. 1 m) at the catchment scale where individual grains are at subpixel level, or; (b) fine resolution outputs (c. 1 mm) at the patch scale. Recently, approaches using unmanned aerial vehicles (UAVs) have started to fill the gap between these scales, providing hyperspatial resolution data (< 10 cm) over reaches a few hundred metres in length, where individual grains are at suprapixel level. This ‘mesoscale’ is critical to habitat assessments. Most existing UAV‐based approaches use two‐dimensional (2D) textural variables to predict grain size. Validation of results is largely absent however, despite significant differences in platform stability and image quality obtained by manned aircraft versus UAVs. Here, we provide the first quantitative assessment of the accuracy and precision of grain size estimates produced from a 2D image texture approach. Furthermore, we present a new method which predicts subaerial gravel size using three‐dimensional (3D) topographic data derived from UAV imagery. Data is collected from a small gravel‐bed river in Cumbria, UK. Results indicate that our new topographic method gives more accurate measures of grain size (mean residual error ‐0.0001 m). Better results for the image texture method may be precluded by our choice of texture measure, the scale of analysis or the effects of image blur resulting from an inadequate camera gimbal. We suggest that at our scale of assessment, grain size is more strongly related to 3D variation in elevation than to the 2D textural patterns expressed within the imagery. With on‐going improvements, our novel method has potential as the first grain size quantification approach where a trade‐off between coverage and resolution is not necessary or inherent. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

16.
Fluxes of submarine groundwater discharge (SGD) were investigated into two tidal rivers on the north and south shore of Long Island, NY, during July 2015. Ground‐based handheld thermal infrared (TIR) imagery, combined with direct push‐point piezometer sampling, documented spatially heterogeneous small‐scale intertidal seepage zones. Pore waters were relatively fresh and enriched in nitrogen (N) within these small‐scale seeps. Pore waters sampled just 20 cm away, outside the boundary of the ground‐based TIR‐located seepage zone, were more saline and lower in N. These ground‐based TIR‐identified seeps geochemically represented the terrestrial fresh groundwater endmember, whereas N in pore waters sampled outside of the TIR‐identified seeps was derived from the remineralization of organic matter introduced into the sediment by tidal seawater infiltration. A 222Rn (radon‐222) time‐series was used to quantify fresh SGD‐associated N fluxes using the N endmembers sampled from the ground‐based TIR pore water profiles. N fluxes were up‐scaled to groundwater seepage zones identified from high‐resolution airborne TIR imagery using the two‐dimensional size of the airborne TIR surface water anomalies, relative to the N flux from the time‐series sampling location. Results suggest that the N load from the north‐shore tidal river to Long Island Sound is underrepresented by at least 1.6–3.6%, whereas the N load from SGD to a south‐shore tidal river may be up to 9% higher than previous estimates. These results demonstrate the importance of SGD in supplying nutrients to the lower reaches of tidal rivers and suggest that N loads in other tidal river environments may be underestimated if SGD is not accounted for.  相似文献   

17.
The aim of this study is to assess of the distribution and map the geomorphological effects of soil erosion at the basin scale identifying newly‐formed erosional landsurfaces (NeFELs), by means of an integration of Landsat ETM 7+ remotely sensed data and field‐surveyed geomorphological data. The study was performed on a 228·6 km2‐wide area, located in southern Italy. The study area was first characterized from a lithological, pedological, land‐use and morpho‐topographic point of view and thematic maps were created. Then, the georeferenced Landsat ETM 7+ satellite imagery was processed using the RSI ENVI 4.0 software. The processing consisted of contrast stretching, principal component analysis (PCA), decorrelation stretching and RGB false colour compositing. A field survey was conducted to characterize the features detected on the imagery. Particular attention was given to the NeFELs, which were located using a global positioning system (GPS). We then delimited the Regions of Interest (ROI) on the Landsat ETM 7+ imagery, i.e. polygons representing the ‘ground‐truth’, discriminating the NeFELs from the other features occurring in the imagery. A simple statistical analysis was conducted on the digital number (DN) values of the pixels enclosed in the ROI of the NeFELs, with the aim to determine the spectral response pattern of such landsurfaces. The NeFELs were then classified in the entire image using a maximum likelihood classification algorithm. The results of the classification process were checked in the field. Finally, a spatial analysis was performed by converting the detected landsurfaces into vectorial format and importing them into the ESRI ArcViewGIS 9.0 software. Application of these procedures, together with the results of the field survey, highlighted that some ‘objects’ in the classified imagery, even if displaying the same spectral response of NeFELs, were not landsurfaces subject to intense soil erosion, thus confirming the strategic importance of the field‐checking for the automatically produced data. During the production of the map of the NeFELs, which is the final result of the study, these ‘objects’ were eliminated by means of simple, geomorphologically‐coherent intersection procedures in a geographic information system (GIS) environment. The overall surface of the NeFELs had an area of 22·9 km2, which was 10% of the total. The spatial analysis showed that the highest frequency of the NeFELs occurred on both south‐facing and southwest‐facing slopes, cut on clayey‐marly deposits, on which fine‐textured and carbonate‐rich Inceptisols were present and displaying slope angle values ranging from 12° to 20°. The comparison of two satellite imageries of different periods highlighted that the NeFELs were most clearly evident immediately after summer tillage operations and not so evident before them, suggesting that these practices could have played an important role in inducing the erosional processes. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

18.
The availability of high‐resolution, multi‐temporal, remotely sensed topographic data is revolutionizing geomorphic analysis. Three‐dimensional topographic point measurements acquired from structure‐from‐motion (SfM) photogrammetry have been shown to be highly accurate and cost‐effective compared to laser‐based alternatives in some environments. Use of consumer‐grade digital cameras to generate terrain models and derivatives is becoming prevalent within the geomorphic community despite the details of these instruments being largely overlooked in current SfM literature. A practical discussion of camera system selection, configuration, and image acquisition is presented. The hypothesis that optimizing source imagery can increase digital terrain model (DTM) accuracy is tested by evaluating accuracies of four SfM datasets conducted over multiple years of a gravel bed river floodplain using independent ground check points with the purpose of comparing morphological sediment budgets computed from SfM‐ and LiDAR‐derived DTMs. Case study results are compared to existing SfM validation studies in an attempt to deconstruct the principle components of an SfM error budget. Greater information capacity of source imagery was found to increase pixel matching quality, which produced eight times greater point density and six times greater accuracy. When propagated through volumetric change analysis, individual DTM accuracy (6–37 cm) was sufficient to detect moderate geomorphic change (order 100 000 m3) on an unvegetated fluvial surface; change detection determined from repeat LiDAR and SfM surveys differed by about 10%. Simple camera selection criteria increased accuracy by 64%; configuration settings or image post‐processing techniques increased point density by 5–25% and decreased processing time by 10–30%. Regression analysis of 67 reviewed datasets revealed that the best explanatory variable to predict accuracy of SfM data is photographic scale. Despite the prevalent use of object distance ratios to describe scale, nominal ground sample distance is shown to be a superior metric, explaining 68% of the variability in mean absolute vertical error. Published 2016. This article is a U.S. Government work and is in the public domain in the USA  相似文献   

19.
The general nature of bulk flow within bedrock single‐channel reaches has been considered by several studies recently. However, the flow structure of a bedrock‐constrained, large river with a multiple channel network has not been investigated previously. The multiple channel network of the Siphandone wetlands in Laos, a section of the Mekong River, was modelled using a steady one‐dimensional hydraulic model. The river network is characterized by a spatially‐varying channel‐form leading to significant changes in the bulk flow properties between and along the channels. The challenge to model the bulk flow in such a remote region was the lack of ideal boundary conditions. The flow models considered both low flow, high inbank and overbank flows and were calibrated using SPOT satellite sensor imagery and limited field data concerning water levels. The application of the model highlighted flow characteristics of a large multi‐channel network and also further indicated the field data that would be required to properly characterize the flow field empirically. Important results included the observation that adjacent channels within the network had different water surface slopes for the same moments in time; thus calibration data for modelling similar systems needs to account for these significant local differences. Further, the in‐channel hydraulic roughness coefficient strongly varied from one cross‐section to the next (Manning's ‘n’ range: 0·01 to 0·10). These differences were amplified during low flow but persisted in muted form during high discharges. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

20.
Automatically extracting drainage networks from digital elevation models coupled with the constant stream threshold value is a regular method. These extracted networks can be verified by comparing the channel initiation points with those from real networks. From the results analysed, the differences in channel initiation points will affect the network geometries, geomorphological indices and hydrological responses. This paper develops two automatic algorithms, the headwater‐tracing method and the fitness index, to trace the flow paths from headwaters to the outlet and to calculate the reasonable stream threshold. Instead of the method determined by trial and error or field survey, the accurate channel initiation points can be obtained from airborne photographs coupled with high‐resolution SPOT images for suitable drainage network extraction. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号