首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
Stream bathymetry is a critical variable in a number of river science applications. In larger rivers, bathymetry can be measured with instruments such as sonar (single or multi‐beam), bathymetric airborne LiDAR (light detection and ranging), or acoustic Doppler current profilers. However, in smaller streams with depths less than 2 m, bathymetry is one of the more difficult variables to map at high‐resolution. Optical remote sensing techniques offer several potential solutions for collecting high‐resolution bathymetry. In this research, I focus on direct photogrammetric measurements of bathymetry using multi‐view stereo photogrammetry, specifically Structure‐from‐Motion (SfM). The main barrier to accurate bathymetric mapping with any photogrammetric technique is correcting for the refraction of light as it passes between the two different media (air and water), which causes water depths to appear shallower than they are. I propose and test an iterative approach that calculates a series of refraction correction equations for every point/camera combination in a SfM point cloud. This new method is meant to address shortcomings of other correction techniques and works within the current preferred method for SfM data collection, oblique and highly convergent photographs. The multi‐camera refraction correction presented here produces bathymetric datasets with accuracies of ~0.02% of the flying height and precisions of ~0.1% of the flying height. This methodology, like many fluvial remote sensing methods, will only work under ideal conditions (e.g. clear water), but it provides an additional tool for collecting high‐resolution bathymetric datasets for a variety of river, coastal, and estuary systems. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

2.
The production of topographic datasets is of increasing interest and application throughout the geomorphic sciences, and river science is no exception. Consequently, a wide range of topographic measurement methods have evolved. Despite the range of available methods, the production of high resolution, high quality digital elevation models (DEMs) requires a significant investment in personnel time, hardware and/or software. However, image‐based methods such as digital photogrammetry have been decreasing in costs. Developed for the purpose of rapid, inexpensive and easy three‐dimensional surveys of buildings or small objects, the ‘structure from motion’ photogrammetric approach (SfM) is an image‐based method which could deliver a methodological leap if transferred to geomorphic applications, requires little training and is extremely inexpensive. Using an online SfM program, we created high‐resolution digital elevation models of a river environment from ordinary photographs produced from a workflow that takes advantage of free and open source software. This process reconstructs real world scenes from SfM algorithms based on the derived positions of the photographs in three‐dimensional space. The basic product of the SfM process is a point cloud of identifiable features present in the input photographs. This point cloud can be georeferenced from a small number of ground control points collected in the field or from measurements of camera positions at the time of image acquisition. The georeferenced point cloud can then be used to create a variety of digital elevation products. We examine the applicability of SfM in the Pedernales River in Texas (USA), where several hundred images taken from a hand‐held helikite are used to produce DEMs of the fluvial topographic environment. This test shows that SfM and low‐altitude platforms can produce point clouds with point densities comparable with airborne LiDAR, with horizontal and vertical precision in the centimeter range, and with very low capital and labor costs and low expertise levels. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

3.
Structure‐from‐Motion (SfM) photogrammetry is now used widely to study a range of earth surface processes and landforms, and is fast becoming a core tool in fluvial geomorphology. SfM photogrammetry allows extraction of topographic information and orthophotos from aerial imagery. However, one field where it is not yet widely used is that of river restoration. The characterisation of physical habitat conditions pre‐ and post‐restoration is critical for assessing project success, and SfM can be used easily and effectively for this purpose. In this paper we outline a workflow model for the application of SfM photogrammetry to collect topographic data, develop surface models and assess geomorphic change resulting from river restoration actions. We illustrate the application of the model to a river restoration project in the NW of England, to show how SfM techniques have been used to assess whether the project is achieving its geomorphic objectives. We outline the details of each stage of the workflow, which extend from preliminary decision‐making related to the establishment of a ground control network, through fish‐eye lens camera testing and calibration, to final image analysis for the creation of facies maps, the extraction of point clouds, and the development of digital elevation models (DEMs) and channel roughness maps. The workflow enabled us to confidently identify geomorphic changes occurring in the river channel over time, as well as assess spatial variation in erosion and aggradation. Critical to the assessment of change was the high number of ground control points and the application of a minimum level of detection threshold used to assess uncertainties in the topographic models. We suggest that these two things are especially important for river restoration applications. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

4.
The recent development of structure‐from‐motion (SfM) and multi‐view stereo (MVS) photogrammetry techniques has enabled semi‐automatic high‐resolution bathymetry using aerial images taken by consumer‐grade digital cameras mounted on unmanned aerial vehicles (UAVs). However, the applicability of these techniques is sometimes limited by sun and sky reflections at the water surface, which render the point‐cloud density and accuracy insufficient. In this research, we present a new imaging technique to suppress the effect of these water‐surface reflections. In this technique, we order a drone to take a short video instead of a still picture at each waypoint. We then apply a temporal minimum filter to the video. This filter extracts the smallest RGB values in all the video frames for each pixel, and composes an image with greatly reduced reflection effects. To assess the performance of this technique, we applied it at three small shallow‐water sites. Specifically, we evaluated the effect of the technique on the point cloud density and the accuracy and precision of the photogrammetry. The results showed that the proposed technique achieved a far denser point cloud than the case in which a randomly chosen frame was used for each waypoint, and also showed better overall accuracy and precision in estimating water‐bottom elevation. The effectiveness of this new technique should depend on the surface wave state and sky radiance distribution, and this dependence, as well as the applicability to large areas, should be investigated in future research. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

5.
The availability of high‐resolution, multi‐temporal, remotely sensed topographic data is revolutionizing geomorphic analysis. Three‐dimensional topographic point measurements acquired from structure‐from‐motion (SfM) photogrammetry have been shown to be highly accurate and cost‐effective compared to laser‐based alternatives in some environments. Use of consumer‐grade digital cameras to generate terrain models and derivatives is becoming prevalent within the geomorphic community despite the details of these instruments being largely overlooked in current SfM literature. A practical discussion of camera system selection, configuration, and image acquisition is presented. The hypothesis that optimizing source imagery can increase digital terrain model (DTM) accuracy is tested by evaluating accuracies of four SfM datasets conducted over multiple years of a gravel bed river floodplain using independent ground check points with the purpose of comparing morphological sediment budgets computed from SfM‐ and LiDAR‐derived DTMs. Case study results are compared to existing SfM validation studies in an attempt to deconstruct the principle components of an SfM error budget. Greater information capacity of source imagery was found to increase pixel matching quality, which produced eight times greater point density and six times greater accuracy. When propagated through volumetric change analysis, individual DTM accuracy (6–37 cm) was sufficient to detect moderate geomorphic change (order 100 000 m3) on an unvegetated fluvial surface; change detection determined from repeat LiDAR and SfM surveys differed by about 10%. Simple camera selection criteria increased accuracy by 64%; configuration settings or image post‐processing techniques increased point density by 5–25% and decreased processing time by 10–30%. Regression analysis of 67 reviewed datasets revealed that the best explanatory variable to predict accuracy of SfM data is photographic scale. Despite the prevalent use of object distance ratios to describe scale, nominal ground sample distance is shown to be a superior metric, explaining 68% of the variability in mean absolute vertical error. Published 2016. This article is a U.S. Government work and is in the public domain in the USA  相似文献   

6.
With the development of the techniques acquiring high-resolution digital terrain data,the digital terrain data acquisition technology has been widespread applied to the geoscience research.A revolutionary,low-cost and simply operative SfM (Structure from Motion) technology will make obtain high-resolution DEM data more convenient for researches on active tectonics.This paper summarizes the basic principles and workflows of SfM technology and processes and selects the Hongshuiba River area along the northern margin of the Qilian Shan to conduct data collection.We use a series of digital pictures to produce a texture with geographic information,in which data resolution is 6.73cm/pix and average density of point cloud is 220.667 point/m2.The coverage area is 0.286km2.Further,in order to compare the accuracy between SfM data and differential GPS (DGPS) data in details,SfM data are vertically shifted and tilt-corrected.After optimizing corrections of SfM data,the absolute value of elevation difference between two data substantially concentrates around 20cm,roughly equivalent to 2-folds of data error only after the elevation error correction.Elevation difference between two data is 10~15cm in 90% confidence interval.The maximum error is about 30cm,but accounts for less than 10%.Along the direction of fault trace,the height of fault scarp extracted from SfM data shows that vertical displacement of the latest tectonic activity in the east bank of Hongshuiba River is about 1m,and some minimum scarps height may be 0.3m.The results show SfM technology with high vertical accuracy can be able to replace differential GPS in high-precision topographic survey.After correcting of SfM data,elevation difference still exists,which may be associated with methods of generating DEM and SfM data accuracy,which in turn is controlled by the number and distribution of Ground Control Points (GCPs),photos density and camera shooting height,but also related to surface features,Fodongmiao-Hongyazi Fault  相似文献   

7.
Different high‐resolution techniques can be employed to obtain information about the three‐dimensional (3D) surface of glaciers. This is typically carried out using efficient, but also expensive and logistically demanding, light detection and ranging (LiDAR) technologies, such as airborne scanners and terrestrial laser scanners. Recent technological improvements in the field of image analysis and computer vision have prompted the development of a low‐cost photogrammetric approach, which is referred to as ‘structure‐from‐motion’ (SfM). Combined with dense image‐matching algorithms, this method has become competitive for the production of high‐quality 3D models. However, several issues typical of this approach should be considered for application in glacial environments. In particular, the surface morphology, the different substrata, the occurrence of sharp contrast from solar shadows and the variable distance from the camera positions can negatively affect the image texture, and reduce the possibility of obtaining a reliable point cloud from the images. The objective of this study is to test the structure‐from‐motion multi view stereo (SfM‐MVS) approach in a small debris‐covered glacier located in the eastern Italian Alps, using a consumer‐grade reflex camera and the computer vision‐based software PhotoScan. The quality of the 3D models produced by the SfM‐MVS process was assessed via the comparison with digital terrain models obtained from terrestrial laser scanning (TLS) surveys that were performed at the same epochs. The effect of different terrain gradients and different substrata (debris, snow and firn) was also evaluated in terms of the accuracy of the reconstruction by SfM‐MVS versus TLS. Our results show that the quality of this new photogrammetric approach is similar to the quality of TLS and that point cloud densities are comparable or even higher compared with TLS. However, special care should be taken while planning the SfM survey geometry, to optimize the 3D model quality and spatial coverage. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

8.
River streamflow monitoring is currently facing a transformation due to the emerging of new innovative technologies. Fixed and mobile measuring systems are capable of quantifying surface flow velocities and discharges, relying on video acquisitions. This camera-gauging framework is sensitive to what the camera can “observe” but also to field circumstances such as challenging weather conditions, river background transparency, transiting seeding characteristics, among others. This short communication paper introduces the novel idea of optimizing image velocimetry techniques selecting the most informative sequence of frames within the available video. The selection of the optimal frame window is based on two reasonable criteria: (a) the maximization of the number of frames, subject to (b) the minimization of the recently introduced dimensionless seeding distribution index (SDI). SDI combines seeding characteristics such as seeding density and spatial clustering of tracers, which are used as a proxy to enhance the reliability of image velocimetry techniques. Two field case studies were considered as a proof-of-concept of the proposed framework, on which seeding metrics were estimated and averaged in time to select the proper application window. The selected frames were analysed using LSPIV to estimate the surface flow velocities and river discharge. Results highlighted that the proposed framework might lead to a significant error reduction. In particular, the computed discharge errors, at the optimal portion of the footage, were about 0.40% and 0.12% for each case study, respectively. These values were lower than those obtained, considering all frames available.  相似文献   

9.
In this study we evaluate the extent to which accurate topographic data can be obtained by applying Structure from Motion (SfM) photogrammetric methods to archival imagery. While SfM has proven valuable in photogrammetric applications using specially acquired imagery (e.g. from unmanned aerial vehicles), it also has the potential to improve the precision of topographic data and the ease with which can be produced from historical imagery. We evaluate the application of SfM to a relatively extreme case, one of low relative relief: a braided river–floodplain system. We compared the bundle adjustments of SfM and classical photogrammetric methods, applied to eight dates. The SfM approach resulted in data quality similar to the classical approach, although the lens parameter values (e.g. focal length) recovered in the SfM process were not necessarily the same as their calibrated equivalents. Analysis showed that image texture and image overlap/configuration were critical drivers in the tie‐point generation which impacted bundle adjustment quality. Working with archival imagery also illustrated the general need for the thorough understanding and careful application of (commercial) SfM software packages. As with classical methods, the propagation of (random) error in the estimation of lens and exterior orientation parameters using SfM methods may lead to inherent systematic error in the derived point clouds. We have shown that linear errors may be accounted for by point cloud registration based on a reference dataset, which is vital for the further application in quantitative morphological analyses when using archival imagery. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

10.
Recent advances are made in earth surface reconstruction with high spatial resolution due to SfM photogrammetry. High flexibility of data acquisition and high potential of process automation allows for a significant increase of the temporal resolution, as well, which is especially interesting to assess geomorphic changes. Two case studies are presented where 4D reconstruction is performed to study soil surface changes at 15 seconds intervals: (a) a thunderstorm event is captured at field scale and (b) a rainfall simulation is observed at plot scale. A workflow is introduced for automatic data acquisition and processing including the following approach: data collection, camera calibration and subsequent image correction, template matching to automatically identify ground control points in each image to account for camera movements, 3D reconstruction of each acquisition interval, and finally applying temporal filtering to the resulting surface change models to correct random noise and to increase the reliability of the measurement of signals of change with low intensity. Results reveal surface change detection with cm‐ to mm‐accuracy. Significant soil changes are measured during the events. Ripple and pool sequences become obvious in both case studies. Additionally, roughness changes and hydrostatic effects are apparent along the temporal domain at the plot scale. 4D monitoring with time‐lapse SfM photogrammetry enables new insights into geomorphic processes due to a significant increase of temporal resolution. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

11.
Subaerial particle size data holds a wealth of valuable information for fluvial, coastal, glacial and other sedimentological applications. Recently, we have gained the opportunity to map and quantify surface particle sizes at the mesoscale using data derived from small unmanned aerial system (sUAS) imagery processed using structure from motion (SfM) photogrammetry. Typically, these sUAS‐SfM approaches have been based on calibrating orthoimage texture or point cloud roughness with particle size. Variable levels of success are reported and a single, robust method capable of producing consistently accurate and precise results in a range of settings has remained elusive. In this paper, we develop an original method for mapping surface particle size with the specific constraints of sUAS and SfM in mind. This method uses the texture of single sUAS images, rather than orthoimages, calibrated with particle sizes normalised by individual image scale. We compare results against existing orthoimage texture and roughness approaches, and provide a quantitative investigation into the implications of the use of sUAS camera gimbals. Our results indicate that our novel single image method delivers an optimised particle size mapping performance for our study site, outperforming both other methods and delivering residual mean errors of 0.02 mm (accuracy), standard deviation of residual errors of 6.90 mm (precision) and maximum residual errors of 16.50 mm. Accuracy values are more than two orders of magnitude worse when imagery is collected by a similar drone which is not equipped with a camera gimbal, demonstrating the importance of mechanical image stabilisation for particle size mapping using measures of image texture. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

12.
Quantifying the topography of rivers and their associated bedforms has been a fundamental concern of fluvial geomorphology for decades. Such data, acquired at high temporal and spatial resolutions, are increasingly in demand for process‐oriented investigations of flow hydraulics, sediment dynamics and in‐stream habitat. In these riverine environments, the most challenging region for topographic measurement is the wetted, submerged channel. Generally, dry bed topography and submerged bathymetry are measured using different methods and technology. This adds to the costs, logistical challenges and data processing requirements of comprehensive river surveys. However, some technologies are capable of measuring the submerged topography. Through‐water photogrammetry and bathymetric LiDAR are capable of reasonably accurate measurements of channel beds in clear water. While the cost of bathymetric LiDAR remains high and its resolution relatively coarse, the recent developments in photogrammetry using Structure from Motion (SfM) algorithms promise a fundamental shift in the accessibility of topographic data for a wide range of settings. Here we present results demonstrating the potential of so called SfM‐photogrammetry for quantifying both exposed and submerged fluvial topography at the mesohabitat scale. We show that imagery acquired from a rotary‐winged Unmanned Aerial System (UAS) can be processed in order to produce digital elevation models (DEMs) with hyperspatial resolutions (c. 0.02 m) for two different river systems over channel lengths of 50–100 m. Errors in submerged areas range from 0.016 m to 0.089 m, which can be reduced to between 0.008 m and 0.053 m with the application of a simple refraction correction. This work therefore demonstrates the potential of UAS platforms and SfM‐photogrammetry as a single technique for surveying fluvial topography at the mesoscale (defined as lengths of channel from c.10 m to a few hundred metres). Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

13.
In the last decade advances in surveying technology have opened up the possibility of representing topography and monitoring surface changes over experimental plots (<10 m2) in high resolution (~103 points m‐1). Yet the representativeness of these small plots is limited. With ‘Structure‐from‐Motion’ (SfM) and ‘Multi‐View Stereo’ (MVS) techniques now becoming part of the geomorphologist's toolkit, there is potential to expand further the scale at which we characterise topography and monitor geomorphic change morphometrically. Moving beyond previous plot‐scale work using Terrestrial Laser Scanning (TLS) surveys, this paper validates robustly a number of SfM‐MVS surveys against total station and extensive TLS data at three nested scales: plots (<30 m2) within a small catchment (4710 m2) within an eroding marl badland landscape (~1 km2). SfM surveys from a number of platforms are evaluated based on: (i) topography; (ii) sub‐grid roughness; and (iii) change‐detection capabilities at an annual scale. Oblique ground‐based images can provide a high‐quality surface equivalent to TLS at the plot scale, but become unreliable over larger areas of complex terrain. Degradation of surface quality with range is observed clearly for SfM models derived from aerial imagery. Recently modelled ‘doming’ effects from the use of vertical imagery are proven empirically as a piloted gyrocopter survey at 50m altitude with convergent off‐nadir imagery provided higher quality data than an Unmanned Aerial Vehicle (UAV) flying at the same height and collecting vertical imagery. For soil erosion monitoring, SfM can provide data comparable with TLS only from small survey ranges (~5 m) and is best limited to survey ranges ~10–20 m. Synthesis of these results with existing validation studies shows a clear degradation of root‐mean squared error (RMSE) with survey range, with a median ratio between RMSE and survey range of 1:639, and highlights the effect of the validation method (e.g. point‐cloud or raster‐based) on the estimated quality. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

14.
Structure‐from‐motion (SfM) photogrammetry is revolutionising the collection of detailed topographic data, but insight into geomorphological processes is currently restricted by our limited understanding of SfM survey uncertainties. Here, we present an approach that, for the first time, specifically accounts for the spatially variable precision inherent to photo‐based surveys, and enables confidence‐bounded quantification of 3D topographic change. The method uses novel 3D precision maps that describe the 3D photogrammetric and georeferencing uncertainty, and determines change through an adapted state‐of‐the‐art fully 3D point‐cloud comparison (M3C2), which is particularly valuable for complex topography. We introduce this method by: (1) using simulated UAV surveys, processed in photogrammetric software, to illustrate the spatial variability of precision and the relative influences of photogrammetric (e.g. image network geometry, tie point quality) and georeferencing (e.g. control measurement) considerations; (2) we then present a new Monte Carlo procedure for deriving this information using standard SfM software and integrate it into confidence‐bounded change detection; before (3) demonstrating geomorphological application in which we use benchmark TLS data for validation and then estimate sediment budgets through differencing annual SfM surveys of an eroding badland. We show how 3D precision maps enable more probable erosion patterns to be identified than existing analyses, and how a similar overall survey precision could have been achieved with direct survey georeferencing for camera position data with precision half as good as the GCPs'. Where precision is limited by weak georeferencing (e.g. camera positions with multi‐metre precision, such as from a consumer UAV), then overall survey precision can scale as n‐½ of the control precision (n = number of images). Our method also provides variance–covariance information for all parameters. Thus, we now open the door for SfM practitioners to use the comprehensive analyses that have underpinned rigorous photogrammetric approaches over the last half‐century. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

15.
Digital elevation models (DEMs) of river channel bathymetries are developed by interpolating elevations between data collected at discrete points or along transects. The accuracy of interpolated bathymetries depends on measurement error, the density and distribution of point data, and the interpolation method. Whereas point measurement errors can be minimized by selecting the most efficient equipment, the effect of data density and interpolation method on river bathymetry is relatively unknown. Thus, this study focuses on transect‐based collection methods and investigates the effects of transect location, the spacing between transects, and interpolation methods on the accuracy of interpolated bathymetry. This is accomplished by comparing four control bathymetries generated from accurate and high resolution, sub‐meter scale data to bathymetries interpolated from transect data extracted from the control bathymetries using two transect locating methods and four interpolation methods. The transect locating methods are a morphologically‐spaced and an equally‐spaced model. The four interpolation methods are Ordinary Kriging, Delaunay Triangulation, and Simple Linear, which are applied in curvilinear coordinates (Delaunay Triangulation is also applied in Cartesian coordinates), and Natural Neighbor only in Cartesian Coordinates. The bathymetric data were obtained from morphologically simple and complex reaches of a large (average bankfull width = 90 m) and a small (average bankfull width = 17 m) river. The accuracy of the developed DEMs is assessed using statistical analysis of the differences between the control and interpolated bathymetries and hydraulic parameters assessed from bankfull water surface elevations. Results indicate that DEM accuracy is not influenced by the choice of transect location method (with same averaged cross‐section spacing) or a specific interpolation method, but rather by the coordinate system for which the interpolation method is applied and the spacing between transects. They also show negligible differences between the mean depths and surface areas calculated from bathymetries with dense or coarse spacing. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

16.
移动摄影测量技术SfM（Structure from Motion）的发展使活动构造研究中快速获得野外中小区域内高精度DEM数据更便捷,DEM数据精度是目前活动构造与测量领域较关注的问题。本文通过对比非RTK模式无人机摄影测量并结合地面控制点（GCPs）生成的SfM DEM数据与基于RTK移动摄影测量技术获取的RTK-SfM DEM数据差异,重点分析搭载RTK模块的移动摄影测量技术获取的DEM数据在垂向上的精度。数据采集、处理与对比结果表明:在添加地面控制点后的非RTK模式无人机摄影测量生成的DEM数据中,除测量区域边缘照片较少而产生畸变外,大部分地区畸变率较小;基于移动RTK技术摄影测量获取的高程数据畸变率更小,且与非RTK模式无人机摄影结合地面控制点生成的高程数据存在约0.85 m的系统高程误差,减去该误差后,点云对比结果表明二者95%以上的点垂向误差均＜0.05 m;搭载RTK模块的移动摄影测量技术获取的DEM数据在垂向上具有更高的精度,且节省了时间与人工成本。  相似文献   

17.
In recent years airborne laser scanning (ALS) evolved into a state‐of‐the‐art technology for topographic data acquisition. We present a novel, automatic method for water surface classification and delineation by combining the geometrical and signal intensity information provided by ALS. The reflection characteristics of water surfaces in the near‐infrared wavelength (1064 nm) of the ALS system along with the surface roughness information provide the basis for the differentiation between water and land areas. Water areas are characterized by a high number of laser shot dropouts and predominant low backscatter energy. In a preprocessing step, the recorded intensities are corrected for spherical loss and atmospheric attenuation, and the locations of laser shot dropouts are modeled. A seeded region growing segmentation, applied to the point cloud and the modeled dropouts, is used to detect potential water regions. Object‐based classification of the resulting segments determines the final separation of water and non‐water points. The water‐land‐boundary is defined by the central contour line of the transition zone between water and land points. We demonstrate that the proposed workflow succeeds for a regulated river (Inn, Austria) with smooth water surface as well as for a pro‐glacial braided river (Hintereisfernerbach, Austria). A multi‐temporal analysis over five years of the pro‐glacial river channel emphasizes the applicability of the developed method for different ALS systems and acquisition settings (e.g. point density). The validation, based on real time kinematic (RTK) global positioning system (GPS) field survey and a terrestrial orthophoto, indicate point cloud classification accuracy above 97% with 0·45 m planimetric accuracy (root mean square error) of the water–land boundary. This article shows the capability of ALS data for water surface mapping with a high degree of automation and accuracy. This provides valuable datasets for a number of applications in geomorphology, hydrology and hydraulics, such as monitoring of braided rivers, flood modeling and mapping. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

18.
This study determines the aspects of river bathymetry that have the greatest influence on the predictive biases when simulating hyporheic exchange. To investigate this, we build a highly parameterized HydroGeoSphere model of the Steinlach River Test Site in southwest Germany as a reference. This model is then modified with simpler bathymetries, evaluating the changes to hyporheic exchange fluxes and transit time distributions. Results indicate that simulating hyporheic exchange with a high-resolution detailed bathymetry using a three-dimensional fully coupled model leads to nested multiscale hyporheic exchange systems. A poorly resolved bathymetry will underestimate the small-scale hyporheic exchange, biasing the simulated hyporheic exchange towards larger scales, thus leading to overestimates of hyporheic exchange residence times. This can lead to gross biases in the estimation of a catchment's capacity to attenuate pollutants when extrapolated to account for all meanders along an entire river within a watershed. The detailed river slope alone is not enough to accurately simulate the locations and magnitudes of losing and gaining river reaches. Thus, local bedforms in terms of bathymetric highs and lows within the river are required. Bathymetry surveying campaigns can be more effective by prioritizing bathymetry measurements along the thalweg and gegenweg of a meandering channel. We define the gegenweg as the line that connects the shallowest points in successive cross-sections along a river opposite to the thalweg under average flow conditions. Incorporating local bedforms will likely capture the nested nature of hyporheic exchange, leading to more physically meaningful simulations of hyporheic exchange fluxes and transit times.  相似文献   

19.
An imaging‐based automated large‐scale particle image velocimetry (LSPIV) system for flash flood monitoring is developed and deployed in a mountainous stream in the Longchi Catchment, Chengdu, China. This system is built from a low‐cost Raspberry Pi board‐level computer with a camera module, which can acquire continuous images/videos automatically at programmed intervals. The minimum quadratic difference algorithm tracks surface patterns as flow tracers to estimate the distribution of surface velocities. Meanwhile, a stereo imaging‐based ‘virtual pole’ method has been developed to reconstruct the three‐dimensional topography with a stereo digital camera, and a cross‐sectional bathymetry has been generated without manual surveying. The varying water stage and water surface gradient, which are critical parameters that affect image rectification and surface velocity measurements, can also be directly resolved by applying the two imaging modules together. Discharge can then be estimated with the velocity–area method through selected cross sections. A flash flood that occurred between 24 July 2014 and 25 July 2014 is selected for analysis. The water surface level reconstructed from image processing was validated with marked water levels, and a good agreement was found with a root mean square error of 3.7 cm. The discharge recorded during the flood recession process ranged from approximately 3.5 to 27 m3/s. The rating curve obtained can be well described by a power function, and the linear regression suggested a Manning's n roughness coefficient of 0.18 of one specific cross section. Some limitations of the presented large‐scale particle image velocimetry system are also put forward, and possible solutions are provided for future improvements. With these proposed upgrades, the system can provide valuable datasets of flash floods in steep mountainous streams, which are critically needed for improving our understanding and modelling of many hydrological processes associated with flood generation, propagation and erosion, as well as for real‐time forecasting. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

20.
Seismic refraction surveying is still an important tool for determining the geometries and elastic wave propagation velocities of near-surface layers. Many analytical and graphical methods have been developed over the years for refraction interpretation, and these can be classified into two basic groups. The first group visualizes critically refracted rays converging on a common surface position, while the second group, which includes the wavefront methods, makes use of the critical rays emerging from a common point on the refractor. The method described in this paper is an analytical approach to the wavefront methods. The reverse refracted ray received by a geophone is intersected by the forward refracted rays received by subsequent geophones and a common critical refraction point on the refractor is estimated after a series of comparisons. This process is repeated for each geophone to yield the geometry and the velocity of the refractor. Several interpolations are performed to achieve a better accuracy. Palmer's models are used to test the efficiency of the algorithm. The results are presented together with those of other methods applied to the same models.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号