共查询到20条相似文献，搜索用时 609 毫秒
1.
Double-couple point-source parameters for 11 of the largest intraplate earthquakes in the northern Indian Ocean during the last 20 y were determined from a formal inversion of long-period P and SH waveforms. Nine of the events have centroid depths at least 17 km below the seafloor, well into the upper mantle; two have centroid depths as great as 39 km. Using the source mechanisms of these earthquakes, we distinguish two major intraplate tectonic provinces in the northern Indian Ocean. To the west of the Ninetyeast Ridge, in the southern Bay of Bengal, intraplate earthquakes have thrust-faulting mechanisms with P axes oriented N-S. The centroid depths of these earthquakes range from 27 to 39 km below the seafloor. Lithospheric shortening in this region is thus accomplished by thrust faulting in the strong core of the oceanic upper mantle, while other geophysical evidence suggests that shallow sedimentary and crustal layers apparently deform predominantly by folding. In the immediate vicinity of the Ninetyeast Ridge, earthquakes display strike-slip mechanisms with left-lateral motion on planes parallel to the ridge. This type of faulting occurs from at least 10°S to the northern end of the Ninetyeast Ridge near 10°N, where the ridge meets the Sunda Arc. Seismic activity diminishes to the east of the Ninetyeast Ridge, but is also characterized by strike-slip faulting. Despite these variations in deformational style, the inferred orientation of greatest compressive stress in the northern Indian Ocean displays a consistent long-wavelength pattern over a large portion of the Indian plate, varying smoothly from nearly N-S in the Bay of Bengal to NW-SE in the northeastern Indian Ocean. This plate-wide stress pattern and the high level of intraplate seismicity in the northern Indian Ocean are likely the results of substantial resistance, along the Himalayan continental collision zone, to the continued northward motion of the western portion of the Indian plate. Oceanic intraplate earthquakes in other regions, where the level of deviatoric stress associated with the long-wavelength part of the stress field is likely to be smaller, need not be comparably reliable indicators of the plate-wide stress field. 相似文献
2.
汤加—克马德克俯冲带是太平洋板块向澳大利亚板块俯冲碰撞的动力作用区,是全球俯冲带动力学研究的热点区域.本研究基于EHB地震目录,对汤加—克马德克俯冲带(18.5°S—28.5°S)区域进行平面拟合,得到该范围内俯冲带走向约为196°,倾角约为48°;利用该俯冲带研究区域内Global CMT目录,对不同位置、不同深度进行区域应力张量反演,得到汤加—克马德克俯冲带研究区内精细的应力图像.结果显示:(1)俯冲带浅部(60~300km)应力结构非均匀特征明显,主应力轴倾伏角变化多样,并且最大主压应力轴方位在24°S左右发生明显偏转,我们推测这可能与洋底构造路易斯维尔海链俯冲有关;(2)中部(300~500km)最大主压、主张应力轴由北向南逐渐发生偏转,这可能与由北向南流动的地幔流对俯冲板片产生推挤作用有关,并且这种推挤作用向南逐渐减弱;(3)深部(500~700km)最大主压应力轴沿俯冲方向分布;(4)本文的结果还发现了主俯冲带深部西侧"偏移"板片与主俯冲带应力结构不同,表明"偏移"板片与主俯冲带是分离的. 相似文献
3.
Abstract The Molucca Sea is a narrow basin located south of Mindanao (Philippines) and underlined by a north-south ophiolitic ridge. This ridge represents the outer ridge of the Sangihe subduction zone and emerges by uplift in the central part of the basin, in the Talaud Islands. Field studies indicate that forearc sediments rest uncomformably on (i) a dismembered ophiolitic series and (ii) thick melanges. Structural analysis indicates two deformation events, one of which is oriented east-west coaxial with the present state of strain. We interpret the earlier (N20°E) direction as a thrusting event that affected an ophiolitic basement associated with the edge of the Celebes Sea. Thrusting within the oceanic crust and sediments also generated olistostromes (melanges). The style of deformation is characterized by flattened rhombs of peridotites which exists in situ in the upper section of the crustal sequence and were also found inside the melange. Incipient Sangihe subduction around 15 Ma uplifted the deformed crust and buried the melanges beneath the forearc sediments. Recent east-west shortening during subduction of the Snellius Plateau reactivated the melanges within thrusts cutting the forearc series. 相似文献
4.
系统研究了1918～2006年间中国大陆及其周缘发生的3115个M4.6以上中、强地震的震源机制解,得到中国大陆地壳区域应力场的压应力轴和张应力轴空间分布的统计结果.探讨了大陆应力场的结构,以及周围板块运动对中国大陆应力场影响作用范围及其界线.结果表明,中国东部的华北地区受到太平洋板块向欧亚板块俯冲挤压的同时,又受到从贝加尔湖经过大华北直至琉球海沟的广阔范围内存在的方位为170°引张应力场的控制.华北地区大地震的震源机制解反映出,该区地震发生为NEE向挤压应力和NNW向张应力的共同作用结果.印度洋板块向欧亚板块的碰撞挤压运动所产生的强烈的挤压应力,控制了喜马拉雅、青藏高原、乃至延伸到天山及其以北的广大地区.在青藏高原周缘地区和中国西部的大范围内,压应力P轴水平分量位于20°~40°,形成了近北东方向的挤压应力场,大量逆断层型强震集中发生在青藏高原的南、北和西部周缘地区以及天山等地区. 本文结果表明,正断层型地震集中发生在青藏高原中部高海拔的地区.证明了青藏高原周缘区域发生南北向强烈挤压短缩的同时,中部高海拔地区存在着明显的近东西向的扩张运动.根据本文最新结果,得到了华北、华南块体之间地壳区域应力场的控制边界线,发现该分界线与大地构造、岩石圈板块构造图等有较大差异,特别是在大别及其以东地区, 该分界线向东南偏转,在沿海的温州附近转向东,最终穿过东海直至琉球海沟.台湾纵谷断层是菲律宾海板块与欧亚板块之间碰撞挤压边界,来自北西西向运动的菲律宾海板块构造应力控制了从台湾纵谷、华南块体,直到中国南北地震带南段东部地域的应力场. 地震震源机制结果还表明,南北地震带南段西侧其P轴大约为NNE方向,与青藏高原的P轴方位一致.南北地震带南段东侧其P轴大约为NWW方向,与华南块体的P轴方位一致.因此,将中〖JP2〗国大陆分成东、西两部分的南北地震带南段是印度洋板块与菲律宾海板块在中国大陆内部影响控制范围的分界线. 相似文献
5.
本研究基于Global CMT提供的1196个1976年11月—2017年1月MW4.6地震矩心矩张量解,对西北太平洋俯冲带日本本州至中国东北段的应力场进行反演计算,得到了从浅表到深部俯冲带应力状态的完整分布.结果显示:俯冲带浅表陆壳一侧应力场呈现水平挤压、垂向拉伸状态,洋壳一侧的应力状态则相反,即近水平拉张、近垂向压缩.沿着俯冲板片向下,应力主轴逐渐向俯冲板片轮廓靠拢,其中位于双地震层(120km深度附近)之上的部分,主张应力轴沿俯冲板片轮廓展布而又比其更为陡倾;双地震层内的应力模式同典型I型双层地震带内的应力模式一致,即上层沿俯冲板片轮廓压缩、下层沿俯冲板片轮廓拉伸;双地震层之下,应力模式逐步转变为主压应力轴平行于俯冲板片轮廓.通观所研究的整个俯冲系统,水平面内主压和主张应力轴基本保持了与西北太平洋板片俯冲方向上的一致性,同经典俯冲板片的应力导管模型所预言的俯冲带应力模式相符;而主张应力轴在俯冲板片表面之下的中源地震深度范围内转向海沟走向,或许同研究区域横跨日本海沟与千岛海沟结合带,改变的浅部海沟形态致使完整俯冲板片下部产生横向变形有关. 相似文献
6.
So far, the direction and rate of relative motion between the Rivera and the North American plates (RIV-NAM) has been determined by the combination of two Euler poles: Rivera (RIV), with respect to Pacific (PAC), and PAC with respect to North America. Here, we estimate the relative motion of this plate pair (RIV-NAM) assuming that the horizontal projection of the direction of slip of the earthquakes occurring on the RIV-NAM boundaries reflect their relative plate motion. A catalog of earthquakes for which focal mechanisms are reported since 1976 is used in the analysis. Earthquakes were considered in the three segments of the RIV-NAM plate boundary: the subduction zone of the Rivera plate beneath the Jalisco block, the Tres Marias Escarpment and the events associated with the Tamayo Fracture Zone. The best fitting Euler pole is determined using a grid search of 64 potential poles. The slip direction predicted for each grid point is compared to the slip direction of the focal mechanisms of the earthquakes on the plate boundary. The best fitting Euler pole, determined in a root mean square sense (RMS), is located at 21.8°N, 107.6°W. A rate of rotation of 5.3°/year is estimated assuming the seismic earthquake cycle of the 1932 and 1995 great earthquakes represents a lower bound of the rate of plate motion in the subduction zone. The best fitting Euler pole shows that the subduction of the Rivera plate takes place in a direction perpendicular to the trench with a relative velocity of 4.3 cm/year, offshore Manzanillo. The rate of relative motion RIV-NAM decreases from SE to NW. North of approximately 21°N, the subduction of the Rivera plate becomes oblique to the trench and the relative velocity between the two plates decreases to an average of 1.9 cm/year. This slow rate of convergence may explain the rapid decrease of seismicity in the trench and the apparent absence of large earthquakes in this region. In the Tres Marias Escarpment, our best-fitting pole suggests that subduction stops, giving way to high-angle reverse faulting perpendicular to the Tres Marias Escarpment, in agreement with the reverse faulting earthquakes occurring here. To the north of 22.5°N, the slip predicted by the best-fitting pole suggests right-lateral faulting in a direction parallel to the Tamayo Fracture Zone, at a very low velocity (0.5–1.0 cm/year). The best fitting Euler pole determined here lies very close to the RIV-NAM plate boundary in the vicinity of the Tamayo Fracture Zone. This location of our best fitting Euler pole explains the low relative plate velocity, the relatively low level of seismic activity and the presence of a broad zone of deformation that accommodates the RIV-NAM motion. 相似文献
7.
Fault plane solutions for earthquakes in the central Hellenic arc are analysed to determine the deformation and stress regimes
in the Hellenic subduction zone in the vicinity of Crete. Fault mechanisms for earthquakes recorded by various networks or
contained in global catalogues are collected. In addition, 34 fault plane solutions are determined for events recorded by
our own local temporary network on central Crete in 2000–2001. The entire data set of 264 source mechanisms is examined for
types of faulting and spatial clustering of mechanisms. Eight regions with significantly varying characteristic types of faulting
are identified of which the upper (Aegean) plate includes four. Three regions contain interplate seismicity along the Hellenic
arc from west to east and all events below are identified to occur within the subducting African lithosphere. We perform stress
tensor inversion to each of the subsets in order to determine the stress field. Results indicate a uniform N-NNE direction
of relative plate motion between the Ionian Sea and Rhodes resulting in orthogonal convergence in the western forearc and
oblique (40–50∘) subduction in the eastern forearc. There, the plate boundary migrates towards the SE resulting in left-lateral strike-slip
faulting that extends to onshore Eastern Crete. N110∘E trending normal faulting in the Aegean plate at this part is in accordance with this model. Along-arc extension is observed
on Western Crete. Fault plane solutions for earthquakes within the dipping African lithosphere indicate that slab pull is
the dominant force within the subduction process and responsible for the roll-back of the Hellenic subduction zone. 相似文献
8.
青藏高原内部除大规模的东西向走滑断裂以外,另一个显著的地质特征就是在藏南及高原腹地广泛发育东西向的伸展构造,形成走向近南北的断裂构造,如亚东一谷露裂谷带及双湖断裂.伸展构造已经成为青藏高原地质研究的一个焦点问题.在羌塘地块89°E附近存在明显的低重力、负磁、深度达300 km的低速异常及连通壳幔的高导异常,且地表伴生大规模的新生代火山岩,这些特殊的地质及地球物理场特征的发生位置与地表双湖断裂的位置基本对应.本文通过卫星重力数据的多尺度小波分析结果发现,双湖断裂之下,存在一明显由上地壳一直向下延伸至地幔深部的低重力异常,说明双湖断裂向下延伸深度大,且上下连通性好.结合已有的地质和地球物理资料,认为由于双湖断裂的存在,使得深部幔源岩浆沿断裂构造薄弱带上涌,从而导致羌塘地块之下壳幔温度的升高及大规模部分熔融的发生. 相似文献
9.
Ali K. Abdel-Fattah Saad M. Mogren Sattam Almadani 《Studia Geophysica et Geodaetica》2016,60(2):268-279
The relative movement between African, Arabian and Eurasian plates has significantly controlled the tectonic process of Sinai subplate region, although its kinematics and precise boundaries are still doubtful. The respective subplate bounded on both sides by the Aqaba-Dead Sea transform fault to the east and the Gulf of Suez, the only defined part, to the west. Seismicity parameters, moment magnitude relation and fault plane solutions were combined to determine the active tectonics along the aforementioned boundaries. Seven shallow seismogenic zones were defined by the heterogeneity in stress field orientations. Along the eastern boundary, the average fault plane solution obtained from the moment tensor summation (MTS) reveals a sinistral strike-slip faulting mechanism. The corresponding seismic strain rate tensor showed that the present tectonic stress producing earthquakes along the boundary is dominated by both NW-SE compression and NE-SW dilatation. Towards the north, the average focal mechanism showed a normal faulting mechanism of N185°E compression and an N94°E extension in the Carmel Fairi seismic zone. On the other hand, the active crustal deformation along the western boundary (Gulf of Suez region) showed a prevailing tensional stress regime of NE to ENE orientations; producing an average fault plane solution of normal faulting mechanism. The seismic strain rate tensor reveals a dominant stress regime of N58°E extension and N145°E compression in consistence with the general tectonic nature in northeastern Africa. Finally, the extensional to strike-slip stress regimes obtained in the present study emphasize that the deformation accommodated along the Sinai subplate boundaries are in consistence with the kinematics models along the plate boundaries representing the northern extremity part of the Red Sea region. 相似文献
10.
11.
THREE-DIMENSIONAL DEFORMATION OF THE 2008 GAIZE EARTHQUAKES RESOLVED FROM INSAR MEASUREMENTS BY MULTIPLE VIEW ANGLES AND ITS TECTONIC IMPLICATIONS 
下载免费PDF全文
下载免费PDF全文 The 2008 Gaize MW6.4 earthquake,occurring on the tensional active fault zone located between Lhasa terrane and Qiangtang terrane in the interior of Tibet is a typical normal-faulting event.In this paper,we resolve the three-dimensional coseismic displacement fields of the earthquakes using a least-square iterative approximation solution with a priori knowledge,according to the theoretical basis that InSAR measurements are extremely insensitive to N-S component.Results show that the boundary dividing the two sides of the main-shock fault is very clear in the vertical movement,and two remarkable subsidence centers can be observed on the hanging wall,while amplitude of the west one (-48.9cm) is larger than the east (-41.4cm),but the maximum uplift on the footwall is only 5cm.In addition to some northward movement with amplitude less than 5cm around the aftershock fault,the north-south deformation field suggests an overall southward movement.The three-dimensional results indicate that the induced surface movement is predominantly vertical and mostly occurred on the upper side,while there are obvious east-west separation and eastward rotation in the horizontal plane.The full vectors are consistent with simulated deformation field with the RMSE less than 6cm,so the research demonstrates the feasibility of the method to recover precise three-dimensional deformation field.On the whole,the three-dimensional deformation field coincides with the tensile fracture characteristics of Gaize earthquakes,and the tectonic stress background of coeval east-west extension and north-south shortening. 相似文献
12.
兴都库什-帕米尔地区是印度板块与欧亚板块相互碰撞的强烈变形区域,也是中国大陆与周边板块动力传递的关键部位,明确该地区两大板块俯冲接触的几何形态和动力作用对研究区域动力环境具有实际意义.本文首先基于Hayes等在2009和2010年提出的Slab1.0的研究思路,利用地震参数准定量地给出两大板块在兴都库什-帕米尔地区碰撞接触的几何形态.结果表明,印度板块在兴都库什地区呈现自南往北的俯冲;欧亚板块在帕米尔地区呈现由北往南的俯冲;同时在兴都库什和帕米尔之间存在俯冲交汇区,在该区印度板块以北西方向、欧亚板块以南东方向相互俯冲.其次基于哈佛大学提供的震源机制解,对不同接触部位进行了应力张量反演,结果显示在兴都库什俯冲区域主要表现为逆冲性质,帕米尔弧西段主要表现为走滑性质,且均具有较好的一致性;而在俯冲交汇区域,走滑、逆冲性质并存,表现为震源机制一致性紊乱.结合两大板块接触的几何形态和区域应力场反演结果,认为印度板块在兴都库什地区主动往北俯冲,而欧亚板块在帕米尔地区被动往南东-南向俯冲,形成两大板块的相互俯冲.本文从几何形态和应力场反演分析两大板块在兴都库什-帕米尔地区碰撞的动力作用方式,可为该区域地球动力学相关研究提供基础资料. 相似文献
13.
本文使用新疆区域数字地震台站记录的宽频带长周期数字波形资料,在时间域反演了2008年10月5日新疆乌恰6.8级地震的强余震及其周围先后发生的52次中等强度地震的矩张量解,结合Harvard大学在该区域的地震矩张量结果,研究了帕米尔东北缘的应力场分区特征.研究结果显示,位于印度板块向欧亚板块推挤的前缘及向北凸出的弧型构造的最北缘的卡兹克阿尔特弧形活动褶皱-逆断裂带,以逆冲推覆活动为主,并有部分走滑类型的地震,基本不存在正断层类型的地震;该弧型构造近东西走向的顶部(文中的西区)与其北西走向的东侧(文中的东区)的局部应力场最大主压应力方向不同,分别为NW、NNE方向,显示出在承受印度板块向欧亚板块俯冲作用的同时,东区也更多的受到了塔里木块体顺时针旋转作用的影响.位于帕米尔陆内俯冲和变形作用强烈、碰撞造成深源地震带东段的南区,地震以走滑错动为主, 逆断、正断层都有,显示出相对复杂的应力状态.位于帕米尔高原内部的西区和南区的应力场最大主压应力方向一致,由北向南,由最大主压应力轴接近水平,过渡为最大主张应力轴接近水平,一定程度揭示了板块俯冲的状态.结合南区和西区的地震深度差异及机制解中断层面的倾角,推测在中帕米尔的东部,由北向南的板块俯冲至150~170km深度,俯冲角度为60°左右. 相似文献
14.
利用中美合作Hi-Climb项目北段吉隆-鲁谷剖面的天然地震探测数据，拾取2004～2005年期间5级以上地震事件的P波与4级以上地震的Pn波震相的走时，通过多震相层析成像反演获得青藏高原腹地的地下500 km以上的P波速度扰动结构.结果表明雅江地区为北向倾斜的低速扰动，班公-怒江断裂下方存在向南俯冲并被印度板块俯冲挤压而回折的高速体，建立了印度板块在冈底斯地块下方拆沉并被雅江低速体穿越的构造样式.说明印度板块俯冲在到达班公-怒江缝合带之前已经开始消减，与拆沉位置对比发现，印度板块的前锋深部呈现多期多级次特征，并受到地幔热循环作用的影响. 相似文献
15.
利用1971年1月至1982年12月的地震资料,研究了千岛岛弧地区的地震分布及震源机制解,进而讨论了贝尼奥夫带的形态及应力状态。地震分布于沿海沟展布的NE向的弧形带上,除地壳内地震外,形成明显的贝尼奥夫带,贝尼奥夫带最深达619公里,两侧较浅,少于200公里,倾向近于NW55°,倾角为45°。地壳内的压应力轴位于NW方向,且接近于水平,反映了太平洋板块的挤压;俯冲带上应力轴随深度变化:114公里以上的T轴沿俯冲方向,114公里至175公里震源机制解分为两组,T轴沿俯冲方向和P轴沿俯冲方向;320公里至440公里范围内P轴有接近俯冲方向的趋势,但较为分散;515公里以下P轴相当集中,且沿俯冲方向。本文对这种应力分布的成因进行了讨论 相似文献
16.
Wathiq Abdulnaby Hanan Mahdi Haydar Al-Shukri Nazar M. S. Numan 《Pure and Applied Geophysics》2014,171(9):2137-2153
The collision zone between the Arabian and Eurasian plates is one of the most seismically active regions. Northern Iraq represents the northeastern part of the Arabian plate that has a suture zone with the Turkish and Iranian plates called the Bitlis–Zagros suture zone. The orientations of the principal stress axes can be estimated by the formal stress inversion of focal mechanism solutions. The waveform moment tensor inversion method was used to derive a focal mechanism solution of 65 earthquakes with magnitudes range from 3.5 to 5.66 in the study area. From focal mechanism solutions, the direction of slip and the orientations of the moment stress axes (P, N, and T) on the causative fault surface during an earthquake were determined. The dataset of the moment stress axes have been used to infer the regional principal stress axes (σ 1, σ 2, and σ 3) by the formal stress inversion method. Two inversion methods, which are the new right dihedron and the rotational optimization methods, were used. The results show that six stress regime categories exist in the study area. However, the most common tectonic regimes are the strike-slip faulting (43.94 %), unspecified oblique faulting (27.27 %), and thrust faulting (13.64 %) regimes. In most cases, the strike-slip movement on the fault surfaces consists of left-lateral (sinistral) movement. The normal faulting is located in one small area and is due to a local tensional stress regime that develops in areas of strike-slip displacements as pull-apart basins. The directions of the horizontal stress axes show that the compressional stress regime at the Bitlis–Zagros suture zone has two directions. One is perpendicular to the suture zone near the Iraq–Iran border and the second is parallel in places as well as perpendicular in others to the suture zone near the Iraq–Turkey border. In addition, the principal stress axes in the Sinjar area near the Iraq–Syria border have a E–W direction. These results are compatible with the tectonic setting of the Arabian–Eurasian continental collision zone and the anticlockwise rotation of the Arabian plate that is evidently responsible for the strike-slip displacements on fault surfaces. 相似文献
17.
《Physics of the Earth and Planetary Interiors》1982,28(3):261-268
The Runcorn stress equations and 2–30° harmonic coefficients of the geopotential have been applied to determine the mantle convection pattern beneath China. The pattern is compared with geophysical and geological observations and it is found that the directional change belts of mantle flows coincide with the major fault belts between tectonic units of China. The stress field generated by mantle flows, except in the Tian Shan region, also coincide with the stress field of recent tectonic movement in China. The Tarim and Junggar basins are formed by tensional stresses due to divergent mantle convection currents under northwest China. The formation of the Qinhai-Xizang (Tibet) plateau is due mainly to the compression of the Tarim block and Indian plate, caused by convergent mantle convection currents. The shear-fault belts in central China (100–105°E) are generated by the running change belt of mantle flows, a well-known N-S seismic zone. In eastern China, tensional faults, grabens, lake and sea depressions are related to the eastward displacement of continental lithosphere exerted by eastward dispersal mantle flows under this region.This paper provides new material for further study of the force source mechanism of recent tectonic movement from the viewpoint of mantle convection currents. 相似文献
18.
喜马拉雅构造带及其临近区域是印度板块与欧亚大陆板块挤压碰撞的前缘地带.本文利用GPS实测速度场与震源机制解数据分别计算了研究区域现今地壳岩石圈表面的GPS应变场及岩石圈内部的主应力分布,研究了印度板块持续挤压作用下板块边界带地壳岩石圈现今地壳形变的空间分布特征.结果显示,南北向的剧烈挤压变形与东西向的拉伸变形是现今青藏高原南缘地壳岩石圈的主要变形特征.其中南北向的地壳挤压变形主要集中在主前缘冲断带与雅鲁藏布江缝合带之间.东西方向上,南北走向的亚东—谷露断裂是区域地壳东西向伸展变形的重要分界断裂.75°E是研究区域地壳形变的另一条显著不连续边界,其西侧地壳主压应变强度低、方向弥散且最大主压应力方向一致性较差,而东侧地壳主压应变方向与主压应力方向以及地壳水平运动速度场方向均具有较好的一致性.布格重力异常的小波多尺度辨析结果显示该分界带与循喜马拉雅西构造结楔入欧亚大陆的印度板块密切相关. 相似文献
19.
喀拉昆仑-嘉黎断裂带(KJFZ)是青藏高原中南部一条规模宏大断裂带,因其是青藏高原向东运移的南边界,其构造展布和活动性质与高原隆升、侧向挤出和东西向伸展等科学问题关系密切,也是研究高原变形机制和地球动力学重要场所.本文选取该断裂带中部NW向格仁错断裂(GRCF),对断裂沿线进行较详细地质地貌调查,对冲沟位错和断层陡坎等地貌单元进行测量,并进行探槽开挖,结合天然剖面揭示了断裂产状,详细研究断裂活动性质,发现断裂除前人认为的右旋走滑性质外,还具有明显的张性正断性质,断裂向北陡倾,且北盘相对南盘下降,全新世以来右旋走滑速率和正断速率分别为2.98 mm/a和0.2~0.5 mm/a之间.前人在共轭的北东向断裂研究中,也发现除左旋走滑性质外,同样具有正断分量,表明现今高原中南部上地壳除传统认为处东西向张性应力场环境外,南北向也具有明显张性特征.而受印度板块向北东向挤压作用,高原岩石圈总体应处于挤压应力状态.因此,推测现今该区域上下地壳处于应力解耦状态,并尝试建立区域张剪性地壳动力学模型:在南北向挤压应力场的作用下,中下地壳缩短凸起隆升,导致上地壳在各方向都表现为不同程度的张性特征. 相似文献
20.
The seismogenic zone of subduction thrust faults 总被引：13，自引：0，他引：13
Abstract Subduction thrust faults generate earthquakes over a limited depth range. They are aseismic in their seaward updip portions and landward downdip of a critical point. The seaward shallow aseismic zone, commonly beneath accreted sediments, may be a consequence of unconsolidated sediments, especially stable-sliding smectite clays. Such clays are dehydrated and the fault may become seismogenic where the temperature reaches 100--150°C, that is, at a 5--15 km depth. Two factors may determine the downdip seismogenic limit. For subduction of young hot oceanic lithosphere beneath large accretionary sedimentary prisms and beneath continental crust, the transition to aseismic stable sliding is temperature controlled. The maximum temperature for seismic behavior in crustal rocks is ～ 350°C, regardless of the presence of water. In addition, great earthquake ruptures initiated at less than this temperature may propagate with decreasing slip to where the temperature is ～ 450°C. For subduction beneath thin island arc crust and beneath continental crust in some areas, the forearc mantle is reached by the thrust shallower than the 350°C temperature. The forearc upper mantle probably is aseismic because of stable-sliding serpentinite hydrated by water from the underthrusting oceanic crust and sediments. For many subduction zones the downdip seismogenic width defined by these limits is much less than previously assumed. Within the narrowly defined seismic zone, most of the convergence may occur in earthquakes. Numerical thermal models have been employed to estimate temperatures on the subduction thrust planes of four continental subduction zones. For Cascadia and Southwest Japan where very young and hot plates are subducting, the downdip seismogenic limit on the subduction thrust is thermally controlled and is shallow. For Alaska and most of Chile, the forearc mantle is reached before the critical temperature, and mantle serpentinite provides the limit. In all four regions, the seismogenic zones so defined agree with estimates of the extent of great earthquake rupture, and with the downdip extent of the interseismic locked zone. 相似文献