共查询到20条相似文献，搜索用时 31 毫秒
1.
原位测量技术在黄海沉积声学调查中的应用 总被引：11，自引：3，他引：8
介绍了最新研制的基于液压驱动贯入的自容式海底沉积声学原位测量系统及其在南黄海中部海底沉积声学调查中的应用。该系统可以实现对海底沉积物声速和声衰减系数进行原位测量,通过液压驱动装置将四根声学探杆匀速贯入到海底沉积物中,减少了对沉积物的扰动,可按照预设的工作参数在海底全自动工作,无需甲板上人员实时控制,采集的声波信号自容式存储于存储单元。系统工作水深为500 m,测量深度为1 m,测量频率为30 kHz,采样频率为10 MHz。使用该系统在南黄海中部获得了40个站位不同类型沉积物的声学特性原位测量数据,并使用CTD剖面仪对该系统声速测量进行了标定,相对误差均小于0.5%,表明该系统测量数据准确、可靠。 相似文献
2.
A remote sediment classification technique based on attenuation measurements from Chirp sub-bottom profiler data is described. This differs from previously published work in that attenuation measurements are obtained for each stratigraphic unit within a complex, thinly interbedded sedimentary sequence. Compressional wave attenuation measurements are obtained for a wide variety of lithologies, including muds, silts, sands, clayey sands, silty clays and gravel lags, with grain sizes ranging from 8 Phi to -4 Phi. In addition, attenuation measurements from sub-bottom profiler data were calibrated against laboratory acoustic measurements of vibracores and seabed samples from corresponding geographic locations, under simulated in-situ conditions using a Pulse Tube method. We adapt an instantaneous frequency matching method using a causal attenuation filter to model the decay of the Chirp transmitted waveform. From this modelling, a relationship between t* (a causal attenuation operator) and change in instantaneous frequency is established. The Hilbert transform is used to extract instantaneous frequency information from Chirp seismic, which is used to derive attenuation information for selected individual stratigraphic layers imaged by the sub-bottom profiler. This paper draws attention to the limitations in comparing attenuation measurements derived from Chirp sub-bottom profiler data against previously published literature on experimental attenuation measurements, which are limited by the wide variance of these data, and the difficulty in finding a meaningful best fit to these data. This demonstrates the importance of calibrating remote sediment classification observations using complimentary acoustic analysis of seabed samples to generate a site-specific geoacoustic database. A positive correlation between laboratory and sub-bottom profiler attenuation measurements was obtained, with a correlation coefficient of 0.885. Poorly sorted gravels with a mixed lithic and biogenic pebble component are characterised by very high attenuation with values of Q from 4 to 19. These sediments are considerably coarser-grained than those typically described in previously published experimental studies. 相似文献
3.
为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。 相似文献
4.
5.
Lei Sun Xiangmei Meng Guanbao Li Guangming Kan Baohua Liu 《Marine Georesources & Geotechnology》2020,38(5):595-603
AbstractThe high-frequency acoustic properties of seafloor sediments are very significant in seafloor study and underwater acoustic study field. In order to measure the sound speed and the attenuation for the small-scale sediment cores more accurately, this study developed a water coupled acoustic laboratory measurement system based on Richardson-Briggs technique. This method used the correlation comparison of waveforms received in sediment core and in identical reference tubes filled with water to measure sound speed and attenuation. The sound speed and attenuation of a clayey silt sediment sample were measured using the water coupled acoustic laboratory measurement system. This frequency dependence of the sound speed and attenuation showed that the clayey silt sediment has a weak positive sound speed dispersion, while the attenuation increases with a strong positive gradient within the measurement frequency range. This study also noted that the measured sound speed ratio match well with the empirical equations from literature. The measured attenuation factor data can fall in the Hamilton’s empirical prediction range. 相似文献
6.
The Drag-type In-Situ Acoustic Measurement System (DISAMS) is a new instrument designed for rapid measurement of seabed sediment acoustic parameters, including the sediment sound velocity and acoustic attenuation coefficient. The DISAMS consists of six independent acoustic probes arranged symmetrically such that each side has one transmitting probe and two receiving probes. The entire operation is controlled and monitored in real time by a deck control unit on board, and the center frequency of the DISAMS is 30?kHz. The DISAMS can record full waveforms to determine the sound velocity and attenuation coefficient in the seabed sediment. In addition to site measurements, the DISAMS can also carry out towing measurements, resulting in improved efficiency compared with existing in-situ acoustic measurement systems. This article presents the configuration, electronics, and tests of the DISAMS in detail. Laboratory tests were conducted in a sediment pool, sea trials were carried out in the Zhoushan Islands, and sound velocity and attenuation coefficient data were obtained. The test results demonstrated that the DISAMS performed well and was able to measure the sound velocity and attenuation coefficient rapidly and accurately in both site measurements and towing measurements. 相似文献
7.
A method for estimating the physical and acoustic properties of the sea bed using chirp sonar data 总被引：2，自引：0，他引：2
This paper proposes a method, based on the Biot model, for estimating the physical and acoustic properties of surficial ocean sediments from normal incidence reflection data acquired by a chirp sonar. The inversion method estimates sediment porosity from reflection coefficient measurements and, using the estimated porosity and the measured change in fast wave attenuation with frequency, estimates the permeability of the top sediment layer. The spectral ratio of echoes from the interface at the base of the upper sediment layer and from the sediment-water interface provides a measure of the change in attenuation with frequency. Given the porosity and permeability estimates, the Kozeny-Carman equation provides the mean grain size and the inversion method yields the acoustic properties of top sediment layer. The inversion technique is tested using chirp sonar data collected at the 1999 Sediment Acoustics Experiment (SAX-99) site. Remote estimates of porosity, grain size, and permeability agree with direct measurements of those properties. 相似文献
8.
Geoacoustic and physical properties of carbonate sediments of the Lower Florida Keys 总被引：4，自引：0，他引：4
Near-surface sediment geoacoustic and physical properties were measured from a variety of unconsolidated carbonate sediments
in the Lower Florida Keys. Surficial values of compressional and shear speed correlate with sediment physical properties and
near-surface acoustic reflectivity. Highest speeds (shear 125–150 m s-1; compressional 1670–1725 m s-1) are from sandy sediments near Rebecca Shoal and lowest speeds (shear 40–65 m s-1; compressional 1520–1570 m s-1) are found in soft, silty sediments which collect in sediment ponds in the Southeast Channel of the Dry Tortugas. High compressional
wave attenuation is attributed to scattering of acoustic waves from heterogeneity caused by accumulation of abundant shell
material and other impedance discontinuities rather than high intrinsic attenuation. Compared to siliciclastic sediments,
carbonate sediment shear wave speed is high for comparable values of sediment physical properties. Sediment fabric, rather
than changes due to the effects of biogeochemical processes, is responsible for these differences. 相似文献
9.
10.
南海浅海海底沉积物的声衰减 总被引：3，自引：0，他引：3
报道了南海浅海海底沉积物的声衰减性质。给出了测量和计算海底沉积物声衰减的方法。分析讨论了不同频率下的声衰减以及与若干个海底沉积物物理参数的关系,结果表明,同一类型沉积物在高频段时的声衰减要比低频段的声衰减大;同一频段下粗颗粒沉积物的声衰减要比细颗粒的声衰减大;北部湾海底浅层沉积物声衰减在低频100kHz下为80~150dB/m,在高频1MHz下为150~360dB/m;海南岛南部外海海底浅层沉积物声衰减在低频下为66~160dB/m,在高频1MHz下为190~350dB/m;高频段的数据与台湾海峡北部海底表层沉积物声衰减测量分析数据比较接近,而低频段的数据与台湾海峡北部海底表层沉积物声衰减测量分析数据有较大的差别。 相似文献
11.
Guanbao Li Jingqiang Wang Xiangmei Meng Baohua Liu Guangming Kan Guozhong Han Qingfeng Hua Yanliang Pei Lei Sun 《海洋学报(英文版)》2021,40(4):65-73
Building empirical equations is an effective way to link the acoustic and physical properties of sediments. These equations play an important role in the prediction of sediments sound speeds required in underwater acoustics.Although many empirical equations coupling acoustic and physical properties have been developed over the past few decades, further confirmation of their applicability by obtaining large amounts of data, especially for equations based on in situ acoustic measurement techniques, is required. A sediment acoustic survey in the South Yellow Sea from 2009 to 2010 revealed statistical relationships between the in situ sound speed and sediment physical properties. To improve the comparability of these relationships with existing empirical equations, the present study calculated the ratio of the in situ sediment sound speed to the bottom seawater sound speed, and established the relationships between the sound speed ratio and the mean grain size, density and porosity of the sediment. The sound speed of seawater at in situ measurement stations was calculated using a perennially averaged seawater sound speed map by an interpolation method. Moreover, empirical relations between the index of impedance and the sound speed and the physical properties were established. The results confirmed that the existing empirical equations between the in situ sound speed ratio and the density and porosity have general suitability for application. This study also considered that a multiple-parameter equation coupling the sound speed ratio to both the porosity and the mean grain size may be more useful for predicting the sound speed than an equation coupling the sound speed ratio to the mean grain size. 相似文献
12.
The acoustic properties of seafloor sediments are of great importance in geoacoustic modeling, detecting, and oceanic engineering. The methods based on the first arrival cycle are investigated to calculate sound speed and attenuation of sediment more precisely in in situ measurements. The comparison of different data analysis methods based on the first arrival cycle approach for in situ measurement results in the following conclusions: (1) the calculated methods can help find the effective cycles and reduce the errors in calculating sound speed and attenuation; (2) using this approach, the point judgment method-based data analysis has the same effectiveness as the cross-correlation method-based data analysis in calculating group sound speed and has the same effectiveness in calculating attenuation in the time domain as the spectrum analysis method-based data analysis has in calculating attenuation in frequency domain; and (3) measurement in water can help not only calibrate the transmitting distance but also can calculate the time delay for the sound speed and the attenuation loss in the transmitting process. Finally, theoretical calculation was used to calculate the measured results, indicating a good agreement, which supports that first arrival cycle-based calculated methods can be used to analyze the measured data and the effective density fluid model can be used to analyze more acoustic properties and invert several physical properties in this experiment. 相似文献
13.
Jingqiang Wang Baohua Liu Guangming Kan Zhiwen Sun Xiangmei Meng 《Marine Georesources & Geotechnology》2018,36(5):515-521
The mechanical structure, the function modules, the working principles, and a sea trial of the newly developed ballast in situ sediment acoustic measurement system are reported in this study. The system relies on its own weight to insert transducers into seafloor sediments and can accurately measure the penetration depth using a specially designed mechanism. The system comprises of an underwater position monitoring and working status judgment module and has two operation modes: self-contained measurement and real-time visualization. The designed maximum working water depth of the system is 3,000?m, and the maximum measured depth of seafloor sediment is 0.8?m. The system has one transmitting transducer with the transmitting frequency band of 20–35?kHz and three receiving transducers. The in situ acoustic measurement system was tested at 15 stations in the northern South China Sea, and repeated measurements in seawater demonstrated good working performance. Comparison with predictions from empirical equations indicated that the measured speed of sound and attenuation fell within the predicted range and that the in situ measured data were reliable. 相似文献
14.
15.
多频海底声学原位测试系统研制和试用 总被引：11，自引：2，他引：9
海底沉积物的声学特性(最重要的是声速和声衰减)以及它们与物理(包括土力学)特性之间的关系是沉积物声学中两个重要的研究项目.介绍了新研制的实时监控多频海底声学原位测试系统.该系统可测量浅表层沉积物的声速.探测频率为8,10,12,15 kHz,可根据实际情况选择发射波形、接收增益和采样长度,采样率为0.5~2.0 MHz,工作水深为300 m.系统具有倾斜传感器、8通道扩充等功能.用该系统在杭州湾测得了四种频率的沉积物原位声速. 相似文献
16.
海底沉积物实验室剪切波速度及其与沉积物的物理性质之间的关系 总被引：1，自引：3，他引：1
采用压电陶瓷弯曲元法和共振柱试验的方法对采自我国海域的一些典型海底浅表层沉积物样品进行了剪切波速测试,获得首批可信数据.两种方法所测得的剪切波速数据具有很好的一致性,且在数赫兹至数十千赫兹频段范围内剪切波速不具明显弥散性.剪切波速与沉积物类型关系密切,不同海区和不同类型海底沉积物的剪切波速有明显差异.近海较细颗粒沉积物粉砂的剪切波速在100m/s左右,细颗粒沉积物的剪切波速在100m/s以下;陆架较粗颗粒沉积物的剪切波速最大,超过100m/s;深海、半深海细颗粒沉积物的剪切波速最低,小于50m/s.剪切波速与含水量、密度、孔隙度、塑限和液限等沉积物物理参数之间具很好的相关性,反映了剪切波速和物理性质之间的密切关系.剪切波速与压缩波速呈正相关性,但在不同的波速范围剪切波速随压缩波速的变化有很大不同. 相似文献
17.
Fine-grained sediments commonly occur in areas of the continental shelf where wave and current energy are weak. Bulk density,
compressional wave speed and attenuation are fundamental physical properties of these sediments required for predicting the
response of the seabed for diverse branches of marine science. The traditional coring approach is time and labor-intensive,
with large uncertainties associated with sediment disturbance in the sampling phase. Acoustic methods offer the advantages
of remote sensing, i.e., sampling the sediment structure without mechanical disturbance and a significantly larger seabed
coverage rate per unit time. Two different acoustic methods are described: one using short-range single-bounce interactions
with the seabed, and the second using long-range modal propagation to infer the sediment properties. The relative strengths
and sensitivities of each approach are explored through simulations guided by experience with measured data. 相似文献
18.
19.
Fundamental response of pore-water pressure to microfabric and permeability characteristics: Eckernförde Bay 总被引：1，自引：0，他引：1
R. H. Bennett M. H. Hulbert M. M. Meyer D. M. Lavoie K. B. Briggs D. L. Lavoie R. J. Baerwald W. A. Chiou 《Geo-Marine Letters》1996,16(3):182-188
Ambient and dynamic in situ pore pressures were measured, and microfabric was examined in finegrained, shallow-water sediment in Eckernförde Bay, Germany. In situ permeabilities were calculated from piezometer data. Pore-water pressure decay times in sediments 0.5–1.0 m subbottom are indicative of clayey materials. Shallower sediments, although of similar classical grain size as the deeper sediments, have quicker decay times typical of silty marine sediment. Pore pressure response is a function of the microfabric, porometry, and sediment permeability. Aggregates (composed of fine-grained material, biota, and extracellular polymers) produce large pores and complex microstructure, resulting in effective permeabilities characteristic of silts. 相似文献
20.
基于海底表层沉积物声速特征的南海地声模型 总被引：1，自引：1，他引：0
在由垂直声速梯度建立的地声模型基础上,通过引入沉积物与海水声速比和沉积物压缩波与切变波声速比两个表征沉积物声学特征参数得到更全面和有实际指导意义的地声模型。在沉积物声波传播FCMCM模型基础上,基于热作用和重力作用下沉积物两相介质的应力应变分析,建立TFCMCM和DFCFCM模型,运用模型校正表层沉积物声速特征来计算和解释地声模型。根据海底表层沉积物存在低声速和高声速两种类型,结合沉积物沿纵深孔隙度不变和变化两种类型,得到南海海底沉积物的两类四种典型地声模型:低声速孔隙度不变型、低声速孔隙度减小型、高声速不变型和高声速孔隙度减小型。运用这四种典型地声模型的组合解释了卢博提出的南海三种典型声速结构。认知声速结构将为南海声学探测海底、划分海底区域提供模型支持。 相似文献