共查询到20条相似文献，搜索用时 234 毫秒
1.
基于轴向位移的钢支撑疲劳损伤评估方法 总被引：1，自引：0，他引：1
在罕遇地震下,框架-中心支撑结构中的钢支撑常因局部屈曲位置的低周疲劳开裂而过早退出工作。本文在焊接工字形钢支撑低周疲劳试验研究基础上,提出了一种可用于框架-中心支撑体系非线性动力时程分析中钢支撑疲劳损伤评估的经验方法,并给出了相关步骤的算法流程。研究结果表明:本文方法以钢支撑轴向位移为损伤参量,能实时估算在随机位移荷载下钢支撑的低周疲劳累积损伤发展,并与试验结果吻合较好。 相似文献
2.
近年来,民用航空制造业的快速发展给大柱距空间网架结构带来新的契机。本文针对某大柱距厂房设计了无柱间支撑、柱间钢支撑和柱间消能支撑3种抗侧力结构体系。在此基础上,分别建立了3种结构体系的三维整体有限元模型,通过优化设计确立了钢支撑和消能支撑的具体设计参数,并进行了多遇地震作用下的弹性时程对比分析。最后,建立了结构弹塑性分析的纤维模型,对3种结构体系进行了罕遇地震作用下的弹塑性时程分析,对比研究了3种结构体系在大震作用下的倒塌机制。结果表明：采用纤维模型能够较为精确地进行结构的弹塑性时程分析;相较于不加柱间支撑结构体系,柱间钢支撑和柱间消能支撑结构体系在多遇地震作用下的结构层间位移分别衰减约32%和64%,在罕遇地震作用下的结构层间位移分别衰减约12%和46%,且均具有更好的倒塌机制。本文可供大柱距空间结构的设计与分析参考和借鉴。 相似文献
3.
通过14根铰支焊接工字形支撑在不同特征的循环轴向位移荷载下的低周疲劳试验，研究了循环轴向位移荷载的位移幅值、平均位移幅值及加载次序等因素对钢支撑低周疲劳及耗能性能的影响。研究发现，对称循环荷载中幅值越小，支撑翼缘局部屈曲发展越晚，其耗能及承载力退化也越平缓。文中提出了支撑在幅值6δ≤Δδ≤12δy的对称循环荷载下的疲劳寿命经验公式。试验表明，循环荷载的位移幅值是支撑疲劳损伤及耗能退化的最主要影响因素，过载峰效应及适当的平均压位移幅值改善了钢支撑低周疲劳及耗能性能。 相似文献
4.
钢支撑性能对高层钢结构动力反应的影响 总被引：1，自引：0，他引：1
钢框架－支撑结构体系是高层钢结构常用的结构体系。支撑的性能对高导钢框架－支撑体系的动力性能影响较大，其中支撑的工细比是关键的影响因素。文中通过大量的计算分析研究支撑长细比对高层钢框架－支撑体系弹塑性地震反应的影响，所得结论可供工程设计时参考。 相似文献
5.
七层钢筋混凝土异型柱支撑框架结构模型振动台试验研究 总被引：2，自引：0，他引：2
七层钢筋混凝土异型柱支撑框架结构体系的模型，缩尺比为１：３，在振动台上进行了模拟地震动试验，结果表明：该体系的抗震性能较好，可使斜杆在预估地震强度的作用下先开裂并继续工作，从而减轻主体结构的地震破坏。并指出，该体系应进一步实现抗裂抗倒双重设防准则与其设计方法，研究发挥支撑的消能减震作用。这种抗震结构体系，已在天津市的轻质节能建筑中采用。 相似文献
6.
高层结构一般都要设置复杂的钢筋混凝土抗震墙，如何模拟这些复杂墙体的力学性能就成为高层结构弹塑性分析的关键。本文在粱柱单元、单片墙单元的基础上提出了一种简体墙单元，并将此单元应用于高层混凝土结构推覆分析中。单元考虑了材料非线性，并采用较为精确的方法考虑了结构的二阶效应。理论与试验结果对比分析表明，简体墙单元具有精度高。计算稳定和自由度少等特点，为复杂体型高层结构的弹塑性分析提供了有力保证。 相似文献
7.
高层隔震结构非线性地震响应分析及设计方法研究 总被引：3，自引：0，他引：3
高层隔震结构的分析理论和设计方法是目前隔震技术向高层建筑推广的2个关键理论问题。本文以高烈度区宿迁市已经竣工的高层隔震建筑阳光大厦为工程实例,对高层隔震结构的非线性地震响应分析方法进行了研究,包括隔震支座竖向不同拉压刚度的模拟、各种类型的隔震支座水平力学特性的准确模拟,以及不同地震动输入方式和输入角度对隔震支座受拉情况的影响分析等;在此基础上,对隔震层的设计方法进行了分析,提出了隔震层设计的基本原则,进而给出了控制隔震层设计的基本指标,包括隔震支座的长期面压、极值面压、隔震层偏心率等;最后,对高层隔震结构的相关构造要求进行了必要的说明。 相似文献
8.
为测试高层钢结构建筑抗震性能,在有限元模型中以某高层钢框架结构办公大厦作为研究对象,测试其横向支撑地震动力响应状况。选取地震峰值加速度为200 cm/s^2的El-Centro波作为地震波输入,采用瞬态动力方法分析不同楼板厚度下建筑地震模拟响应,得到建筑顶层位移时程曲线;在SAP2000结构软件中分析建筑工程添加横向支撑前后的反应谱,记录各楼层垂直与水平方向位移与层间位移角。得到如下结果:高层钢结构建筑在地震响应下产生的位移不随楼板厚度的增加而增大,楼板厚度为100 mm、170 mm时位移波动显著;添加横向支撑后,建筑水平刚度显著提升,同理,添加横向支撑后横向层间位移角的最大值变化较大,且低于1/250,符合相关建筑标准。 相似文献
9.
多层及高层框架结构地震损伤诊断的神经网络方法 总被引：12，自引：4，他引：12
本文提出了强震后多层及高层框架结构地震损伤诊断的神经网络方法。文中在提出有结点损伤的梁柱有限元刚度矩阵的基础上，建立了有结点损伤框架结构的有限元模型。通过完好结构和有损伤结构的有限元分析，获取二者应变模态差值作为损伤标识量，并输入径向基（RBF）神经网络进行训练，得到了框架结构结点损伤诊断的神经网络系统。数值仿真分析结果表明，此神经网络可以对多层及高层框架结构结点各种程度的损伤做出成功诊断。 相似文献
10.
11.
Charles W. Roeder Dawn E. Lehman Kelly Clark Jacob Powell Jung‐Han Yoo Keh‐Chyuan Tsai Chih‐Han Lin Chih‐Yu Wei 《地震工程与结构动力学》2011,40(4):355-374
Braced frames are one of the most economical and efficient seismic resisting systems yet few full‐scale tests exist. A recent research project, funded by the National Science Foundation (NSF), seeks to fill this gap by developing high‐resolution data of improved seismic resisting braced frame systems. As part of this study, three full‐scale, two‐story concentrically braced frames in the multi‐story X‐braced configuration were tested. The experiments examined all levels of system performance, up to and including fracture of multiple braces in the frame. Although the past research suggests very limited ductility of SCBFs with HSS rectangular tubes for braces recent one‐story tests with improved gusset plate designs suggest otherwise. The frame designs used AISC SCBF standards and two of these frames designs also employed new concepts developed for gusset plate connection design. Two specimens employed HSS rectangular tubes for bracing, and the third specimen had wide flange braces. Two specimens had rectangular gusset plates and the third had tapered gusset plates. The HSS tubes achieved multiple cycles at maximum story drift ratios greater than 2% before brace fracture with the improved connection design methods. Frames with wide flange braces achieved multiple cycles at maximum story drift greater than 2.5% before brace fracture. Inelastic deformation was distributed between the two stories with the multi‐story X‐brace configuration and top story loading. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
12.
This paper is concerned with the design of steel frames using friction damped slotted bolted connections (SBCs) in the diagonal braces. A dynamic model is developed to describe the behaviour of a single‐degree‐of‐freedom (SDOF) steel frame that uses bilinear hysteretic behaviour for the damper. This model is generalized to MDOF systems. A novel algorithm for displacement reversal in the transition from slip to stick is presented. It uses numerical noise for its success. A design procedure that attains the stiffness of the individual braces and their elongation at the threshold of activation is then applied to a 10‐storey steel frame. This design process is a two‐phase iterative procedure that converges quite fast. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
13.
A new earthquake resistant structural system for multi‐storey frame structures, based on a dual function of its bracing components, is developed. This consists of a hysteretic damper device and a cross‐bracing mechanism with a kinetic closed circuit, working only in tension, so that cable members can be used for this purpose. Solutions are presented regarding the connections' design of three types of structural frame system, that are concerned throughout the study: braced moment free frame, braced moment resisting frame with moment free supports, and with moment resisting supports. The dynamic behaviour of the system is investigated on the basis of an SDOF model, and based on the response spectra method an approximate design approach of the controlled structures is shown. From the time history analysis of the structural systems for the El Centro earthquake the areas of appropriate stiffness relations of the frames to the hysteretic dampers and the cable braces are deduced, so that the energy dissipation of the system may be controlled by the damper‐cable bracing mechanism. Based on the results of these studies, a predesign approach is developed for the implementation of the control system in frame structures. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
14.
An extensive experimental program of shaking table tests on reduced‐scale structural models was carried out within the activities of the MANSIDE project, for the development of new seismic isolation and energy dissipation devices based on shape memory alloys (SMAs). The aim of the experimental program was to compare the behaviour of structures endowed with innovative SMA‐based devices to the behaviour of conventional structures and of structures endowed with currently used passive control systems. This paper presents a comprehensive overview of the main results of the shaking table tests carried out on the models with and without special braces. Two different types of energy dissipating and re‐centring braces have been considered to enhance the seismic performances of the tested model. They are based on the hysteretic properties of steel elements and on the superelastic properties of SMAs, respectively. The addition of passive control braces in the reinforced concrete frame resulted in significant benefits on the overall seismic behaviour. The seismic intensity producing structural collapse was considerably raised, interstorey drifts and shear forces in columns were drastically reduced. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
15.
This study explores seismic performance of steel frame buildings with SMA-based self-centering bracing systems using a probabilistic approach. The self-centering bracing system described in this study relies on superelastic response of large-diameter cables. The bracing systems is designed such that the SMA cables are always stressed in tension. A four-story steel frame building characterized until collapse in previous research is selected as a case-study building. The selected steel frame building is designed with SMA bracing systems considering various design parameters for SMA braces. Numerical models of these buildings are developed by taking into account the ultimate state of structural components and SMA braces as well as the effect of gravity frames on lateral load resistance. Nonlinear static analyses are conducted to assess the seismic characteristics of each frame and to examine the effect of SMA brace failure on the seismic load carrying capacity of SMA-braced frames. Incremental dynamic analyses (IDA) are performed to compute seismic response of the designed frames at various seismic intensity levels. The results of IDA are used to develop probabilistic seismic demand models for peak inter-story and residual inter-story drifts. Seismic demand hazard curves of peak and residual inter-story drifts are generated by convolving the ground motion hazard with the probabilistic seismic demand models. Results show that steel frames designed with SMA bracing systems provide considerably lower probability of reaching at a damage state level associated with residual drifts compared to a similarly designed steel moment resisting frame, especially for seismic events with high return periods. This indicates reduced risks for the demolition and collapse due to excessive residual drifts for SMA braced steel frames. 相似文献
16.
本文提出了一种新型形状记忆合金（Shape Memory Alloy,SMA）-黏弹性阻尼器（ViscoelasticDamper,VED）自复位支撑,设计了普通预应力筋自复位支撑钢框架与SMA-VED自复位支撑钢框架。采用组合模型以及改进材料模型准确模拟了支撑的力学行为,详细讨论了考虑构件失效的模拟方法,通过试验确定了VED的失效应变范围,最后基于概率统计方法进行了易损性分析以及全周期风险分析。研究发现: SMA-VED自复位支撑可显著提升框架抗震性能;倒塌风险以及残余变形超越概率均显著低于普通预应力筋自复位支撑钢框架,下降比例最高超过50%。预应力筋断裂失效导致框架倒塌风险可提高5倍以上; SMA-VED自复位支撑失效会造成残余变形超越概率有所上升但幅度不大。总体来说,SMA-VED自复位支撑钢框架具备更好的地震鲁棒性。 相似文献
17.
The insertion of steel braces equipped with viscoelastic dampers (VEDs) (‘dissipative braces’) is a very effective technique to improve the seismic or wind behaviour of framed buildings. The main purpose of this work is to compare the earthquake and wind dynamic response of steel‐framed buildings with VEDs and achieve optimal properties of dampers and supporting braces. To this end, a numerical investigation is carried out with reference to the steel K‐braced framed structure of a 15‐storey office building, which is designed according to the provisions of Eurocodes 1 and 3, and to four structures derived from the first one by the insertion of additional diagonal braces and/or VEDs. With regard to the VEDs, the following cases are examined: absence of dampers; insertion of dampers supported by the existing K‐braces in each of the structures with or without additional diagonal braces; insertion of dampers supported by additional diagonal braces. Dynamic analyses are carried out in the time domain using a step‐by‐step initial stress‐like iterative procedure. For this purpose, the frame members and the VEDs are idealized, respectively, by a bilinear model, which allows the simulation of the nonlinear behaviour under seismic loads, and a six‐element generalized model, which can be considered as an in‐parallel‐combination of two Maxwell models and one Kelvin model. Artificially generated accelerograms, whose response spectra match those adopted by Eurocode 8 for a medium subsoil class and for different levels of peak ground acceleration, are considered to simulate seismic loads. Along‐wind loads are considered assuming, at each storey, time histories of the wind velocity for a return period Tr=5 years, according to an equivalent spectrum technique. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
18.
Jeffrey Erochko Constantin Christopoulos Robert Tremblay Hyung‐Joon Kim 《地震工程与结构动力学》2013,42(11):1617-1635
The self‐centering energy dissipative (SCED) brace is a new steel bracing member that provides both damping to the structure and a re‐centering capability. The goal of this study was to confirm the behavior of SCED braces within complete structural systems and to confirm the ability to model these systems with both a state‐of‐the‐art computer model as well as a simplified model that would be useful to practicing engineers. To these ends, a three‐story SCED‐braced frame was designed and constructed for testing on a shake table. Two concurrent computer models of the entire frame were constructed: one using the opensees nonlinear dynamic modeling software, and a simplified model using the commercial structural analysis software sap2000 . The frame specimen was subjected to 12 significant earthquakes without any adjustment or modification between the tests. The SCED braces prevented residual drifts in the frame, as designed, and did not show any significant degradation due to wear. Both numerical models were able to predict the drifts, story shears, and column forces well. Peak story accelerations were overestimated in the models; this effect was found to be caused by the absence of transitions at stiffness changes in the hysteretic model of the braces. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
19.
The paper illustrates a probabilistic methodology for assessing the vulnerability of existing reinforced concrete (RC) buildings with limited ductility capacity retrofitted by means of dissipative braces. The aim is to highlight the most important parameters controlling the capacity of these coupled systems and specific aspects concerning the response uncertainties. The proposed methodology is based on the use of local engineering demand parameters for monitoring the seismic response and on the development of component and system fragility curves before and after the retrofit. In the first part of the paper, the methodology is illustrated by highlighting its advantages with respect to the existing approaches. Then, its capability and effectiveness are tested by considering a benchmark two‐dimensional RC frame designed for gravity‐loads only. The frame is retrofitted by introducing elasto‐plastic dissipative braces designed for different levels of base shear capacity. The obtained results show the effectiveness of the methodology in describing the changes in the response and in the failure modalities before and after the retrofit, for different retrofit levels. Moreover, the retrofit effectiveness is evaluated by introducing proper synthetic parameters describing the fragility curves and by stressing the importance of employing local engineering demand parameters (EDPs) rather than global EDPs in the seismic risk evaluation of coupled systems consisting in low‐ductility RC frames and dissipative braces. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献