首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 139 毫秒
1.
Measurements of tritium and 18O concentrations in precipitation and runoff were used to provide further insight into the groundwater storage properties of the Wimbachtal Valley, a catchment area of 33.4 km2, extending between 636 and 2713 m a.s.l. in the Berchtesgaden Alps. The catchment includes three aquifer types: a dominant porous aquifer; a fractured dolomite; a karstic limestone aquifer. Employing a simple hydrological model, information about mean transit times of environmental tracers is derived for the groundwater runoff component and several karst springs from the application of the exponential and dispersion flow models to the isotopic input and output data. The mean transit times calculated from a dispersion model with transit times of 4.1 years for 18O and 4.2 years for tritium, which agree well, allow calculation of total (mobile + stagnant) groundwater storage volume, which is equivalent to 6.6 m of water depth. Direct runoff appears negligible as in many other cases.  相似文献   

2.
The Kuwait Group consists mainly of clastic sediments overlying unconformably the Dammam Formation of Tertiary age. The Kuwait Group is generally divided into three main hydrostratigraphic units: the upper and lower aquifers separated by an aquitard. The upper aquifer is further divided into the water table aquifer, an aquitard and a semiconfined aquifer. This semiconfined unit was pumped and the drawdowns were observed in piezometers screened in various subunits of the Kuwait Group. Some pumping tests of short duration were carried out in the top water table aquifer as well. These tests showed that the subunits of the Kuwait Group are hydraulically interconnected to a varying degree.

The pumping test data were analysed using conventional analytical solutions. The semiconfined pumping test was also simulated by a quasi-three-dimensional model using a leaky multiaquifer modelling technique. The initial hydraulic parameters were improved manually in the model till best fit drawdowns were obtained.

The final parameters obtained by simulation of the pumping tests were used in designing a pilot drainage system for the control of a rising groundwater table in parts of Kuwait City.  相似文献   


3.
Radial reactive transport is investigated in an aquifer–aquitard system considering the important processes such as advection, radial and vertical dispersions for the aquifer, vertical advection and dispersion for the aquitards, and first-order biodegradation or radioactive decay. We solved the coupled governing equations of transport in the aquifer and the aquitards by honoring the continuity of concentration and mass flux across the aquifer–aquitard interfaces and recognizing the concentration variation along the aquifer thickness. This effort improved the averaged-approximation (AA) model, which dealt with radial dispersion in an aquifer–aquitard system by excluding the aquitard advection. To compare with our new solution, we expanded the AA model by including the aquitard advection. The expanded AA model considerably overestimated the mass in the upper aquitard when an upward advection existed there. The rates of mass change in the upper aquitard from the new solution and the AA model solution increased with time following sub-linear fashions. The times corresponding to the peak values of the residence time distributions for the AA model, the expanded AA model, and the new model were almost the same. The residence time distributions seemed to follow the Maxwell–Boltzmann distribution closely when plotting the time in logarithmic scale. In addition, we developed a finite-element COMSOL Multiphysics simulation of the problem, and found that the COMSOL solution agreed with the new solution well.  相似文献   

4.
A mathematical model that describes the drawdown due to constant pumpage from a finite radius well in a two‐zone leaky confined aquifer system is presented. The aquifer system is overlain by an aquitard and underlain by an impermeable formation. A skin zone of constant thickness exists around the wellbore. A general solution to a two‐zone leaky confined aquifer system in Laplace domain is developed and inverted numerically to the time‐domain solution using the modified Crump (1976) algorithm. The results show that the drawdown distribution is significantly influenced by the properties and thickness of the skin zone and aquitard. The sensitivity analyses of parameters of the aquifer and aquitard are performed to illustrate their effects on drawdowns in a two‐zone leaky confined aquifer system. For the negative‐skin case, the drawdown is very sensitive to the relative change in the formation transmissivity. For the positive‐skin case, the drawdown is also sensitive to the relative changes in the skin thickness, and both the skin and formation transmissivities over the entire pumping period and the well radius and formation storage coefficient at early pumping time. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

5.
A series of numerical simulations using a fully coupled poroelastic numerical model is performed to analyze the so-called Rhade effect. A three-layer aquifer system composed of two aquifers separated by an aquitard, and a corresponding single-layer aquifer system composed of an equivalent lumped material are simulated for the purpose of comparison. In the numerical simulation of the layered aquifer system, the Rhade effect is observed in the aquitard and upper aquifer immediately after the stop of groundwater pumping from the lower aquifer. In contrast, the numerical simulation results of the lumped aquifer system do not show such Rhade effect throughout the entire domain during the groundwater pumping shutoff period. These numerical simulation results strongly suggest that hydraulically less permeable and mechanically more deformable aquitards that generally exist in layered aquifer systems particularly play an important role in causing the Rhade effect at the end of groundwater pumping. The Rhade effect is caused by two mechanisms: a slower hydraulic propagation (head recovery) of the unpumping stress than its mechanical propagation (extension) from the pumped aquifer into the adjacent aquitard and unpumped aquifer due to the relatively lower hydraulic conductivity of the aquitard, and an amplification of the faster mechanical propagation (excessive extension) in the lower part of the aquitard due to its relatively higher deformability. However, the unpumping stress is evenly distributed throughout the entire domain of the lumped aquifer system over time without such hydrogeomechanical mechanisms since it does not have an aquitard and hence is hydraulically and mechanically homogeneous.  相似文献   

6.
This paper presents an analytical model for describing the tidal effects in a two‐dimensional leaky confined aquifer system in an estuarine delta where ocean and river meet. This system has an unconfined aquifer on top and a confined aquifer on the bottom with an aquitard in between the two. The unconfined and confined aquifers interact with each other through leakage. It was assumed that the aquitard storage was negligible and that the leakage was linearly proportional to the head difference between the unconfined and confined aquifers. This model's solution was based on the separation of variables method. Two existing solutions that deal with the head fluctuation in one‐dimensional or two‐dimensional leaky confined aquifers are shown as special cases in the present solution. Based on this new solution, the dynamic effect of the water table's fluctuations can be clearly explored, as well as the influence of leakage on the behaviour of fluctuations in groundwater levels in the leaky aquifer system. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

7.
This article investigates the quantity of submarine groundwater discharge (SGD) from a coastal multi‐layered aquifer system in response to constant rainfall infiltration. The system comprises an unconfined aquifer, a leaky confined aquifer and an aquitard between them and terminates at the coastline. An approximate analytical solution is derived based on the following assumptions: (i) flow is horizontal in the aquifers and vertical in the aquitard, and (ii) flow in the unconfined aquifer is described by nonlinear Boussinesq equation. The analytical solution is compared with numerical solutions of the strictly two‐dimensional nonlinear model to validate the model assumptions used for the analytical solution. The SGD from the leaky confined aquifer increases with the inland rainfall infiltration recharge and the specific leakage of aquitard. The maximum SGD ranges from 1·87 to 10·37 m3 per day per meter of shoreline when rainfall infiltration ranges from 18·2 to 182 mm/year and the specific leakage of aquitard varies from 10?9 to 10?1 l/day. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

8.
Abstract

A borehole is developed in a shallow multi-layered aquifer and used to derive the porosity, specific storage and hydraulic conductivity of the aquitard. Local values of hydrodynamical parameters are estimated from petrophysical analysis of core samples, and the empirical relationship between porosity and permeability. Vertical diffusivity is determined from the response of the aquitard to a loading cyclic signal using pressure records at different depths. Hydraulic conductivities deduced from the petrophysical analysis ranged from 10?8 to 10?10 m s?1 and are comparable with those of facies of marine/lacustrine clay observed in samples. The permeability values calculated based on diffusivity are within the range 10?9 to 10?11 m s?1 with a quasi-systematic bias of one order of magnitude. These values are average for a larger part of the aquitard and correspond to an integrated value. The methodology retained for the aquitard characterization is discussed with emphasis on the implications for the management of a complex aquifer system.

Citation Larroque, F., Cabaret, O., Atteia, O., Dupuy, A., and Franceschi, M., 2013. Vertical heterogeneities of hydraulic aquitard parameters: preliminary results from laboratory and in situ monitoring. Hydrological Sciences Journal, 58 (4), 912–929.  相似文献   

9.
Liu C  Ball WP 《Ground water》2002,40(2):175-184
Vertical profiles of tetrachloroethene (or perchloroethylene, PCE) and trichloroethene (TCE) were used to validate a diffusion process in a natural aquitard at Dover Air Force Base, Delaware. PCE and TCE distributions in the aquitard underlying an unconfined aquifer were sampled from core tubes obtained at four times over the course of a 35-month field investigation within "test cells" that were isolated from the surrounding ground water by means of grout-sealed steel sheetpile barriers (Mackay et al. 2000). For the final 23 months of this period, boundary conditions at the aquifer/aquitard interface were such that a "back diffusion" of contaminants from the aquitard was induced. Modeling predictions of concentration changes were made on the basis of the earliest coring results and an assumption of sorption-retarded diffusion and using laboratory information about sorption and diffusion characteristics of the media. The predictive modeling was complicated by the fact that "initial" and "final" PCE and TCE distributions in the aquitard were measured at different (albeit proximate) coring locations, such that results reflect spatial variations in aquitard characteristics. This problem was solved by means of an inverse interpretation that involved spatial "translation" of observed profiles on the basis of the laboratory characterizations and assuming a common aquifer-side contaminant history. Predictions indicated substantial change in PCE and TCE concentrations within the upper aquitard (near the aquifer/aquitard interface) and the development of a back-diffusion profile up into the aquifer. Modeling also predicted comparatively minor profile changes in the deeper aquitard, and especially in the deep layer where sorption was strongest. All of these predicted effects were observed in the coring results. Although not exact, the agreement between predictions and observations was sufficiently good to justify the basic tenets of the diffusion model and to support a conclusion that major processes of advection and/or transformation were unimportant within the 35-month time scale of this work.  相似文献   

10.
Surface-water and ground-water flow are coupled in the central Everglades, although the remoteness of this system has hindered many previous attempts to quantify interactions between surface water and ground water. We modeled flow through a 43,000 ha basin in the central Everglades called Water Conservation Area 2A. The purpose of the model was to quantify recharge and discharge in the basin's vast interior areas. The presence and distribution of tritium in ground water was the principal constraint on the modeling, based on measurements in 25 research wells ranging in depth from 2 to 37 m. In addition to average characteristics of surface-water flow, the model parameters included depth of the layer of ‘interactive’ ground water that is actively exchanged with surface water, average residence time of interactive ground water, and the associated recharge and discharge fluxes across the wetland ground surface. Results indicated that only a relatively thin (8 m) layer of the 60 m deep surfical aquifer actively exchanges surface water and ground water on a decadal timescale. The calculated storage depth of interactive ground water was 3.1 m after adjustment for the porosity of peat and sandy limestone. Modeling of the tritium data yielded an average residence time of 90 years in interactive ground water, with associated recharge and discharge fluxes equal to 0.01 cm d−1. 3H/3He isotopic ratio measurements (which correct for effects of vertical mixing in the aquifer with deeper, tritium-dead water) were available from several wells, and these indicated an average residence time of 25 years, suggesting that residence time was overestimated using tritium measurements alone. Indeed, both residence time and storage depth would be expected to be overestimated due to vertical mixing. The estimate of recharge and discharge (0.01 cm d−1) that resulted from tritium modeling therefore is still considered reliable, because the ratio of residence time and storage depth (used to calculated recharge and discharge) is much less sensitive to vertical mixing compared with residence time alone. We conclude that a small but potentially significant component of flow through the Everglades is recharged to the aquifer and stored there for years to decades before discharged back to surface water. Long-term storage of water and solutes in the ground-water system beneath the wetlands has implications for restoration of Everglades water quality.  相似文献   

11.
An important quantity in groundwater protection is the residence time of water in an aquifer. It relates to both the travel time of a pollutant to arrive at a well and the time span required for self-purification of a polluted aquifer after removal of pollutant inputs. Time scales for aquifers can be gained from artificial tracer experiments or from environmental tracer data, the latter offering the only realistic alternative if time scales of years or decades have to be taken into account.

Different tracers show different time scales due to their different transport mechanisms especially in the unsaturated zone. While solute tracers are moved advectively with the seepage water, gas tracers pass the unsaturated zone diffusively through the air phase. Depending on the properties of the unsaturated zone (hydraulic properties, thickness) this difference in behavior can be used to separate the subsurface transport process into the unsaturated and the saturated parts.

In a field study in Germany, SF6 and 3H were used as environmental tracers. Both have a relatively well-known input function. Interpretation of data from observation wells by a box model approach led to spatially and temporally varying residence times. This was an indication that the influence of the unsaturated zone could not be neglected. While the gas tracer SF6 shows only residence times in the saturated zone, the tracer 3H reflects the whole travel time of water including both the unsaturated and saturated zones. Using a one-dimensional plug-flow model for the unsaturated zone combined with a detailed two-dimensional flow and transport model for the saturated zone leads to a holistic and consistent interpretation of the measured tracer concentrations. The observed pattern of old water under thick loess cover and younger water under areas where the fractured basalt aquifer crops out is reproduced after adjusting only two parameters: the effective porosity of the saturated aquifer and the product of field capacity and thickness of the unsaturated zone. While the effective porosity of the saturated zone is adjusted by means of the SF6 data, the field capacity of the loess layer is adjusted by means of the 3H observations. The thickness of the unsaturated zone is deduced from geological and pedological maps. All flow data are obtained from a calibrated flow model, which is based on geological data, observed heads and pumping tests only.

The transport model for the saturated zone was calibrated by fitting the porosity by means of gaseous tracer concentrations (SF6). The combined saturated–unsaturated zone model was then calibrated by fitting the field capacity of the unsaturated zone by means of 3H concentrations. With this model it was possible to verify the observed NO3 concentrations at the drinking water wells and to develop predictions for their future development under various scenarios of fertilizer input reduction in specific areas.  相似文献   


12.
Hydraulic properties of deeply weathered basement rocks and variably weathered sedimentary materials were measured by pumping and slug-test methods. Results from over 200 bores in 13 catchments, and eight pumping-test sites across the eastern and central wheatbelt of Western Australia were analysed. Measurements were made in each of the major lithological units, and emphasis placed on a ubiquitous basal saprolite aquifer. Comparisons were made between alternative drilling and analytical procedures to determine the most appropriate methods of investigation.

Aquifers with an average hydraulic conductivity of 0.55 m day−1 occur in variably weathered Cainozoic sediments and poorly weathered saprolite grits (0.57 m day−1). These aquifers are separated by an aquitard (0.065 m day−1) comprising the mottled and pallid zones of the deeply weathered profile. Locally higher values of hydraulic conductivity occur in the saprolite aquifer, although after prolonged periods of pumping the values decrease until they are similar to those obtained from the slug-test methods. Hydraulic conductivities measured in bores drilled with rotary auger rigs were approximately an order of magnitude lower than those measured in the same material with bores drilled by the rotary air-blast method.

Wheatbelt aquifers range from predominantly unconfined (Cainozoic sediments), to confined (saprolite grit aquifer). The poorly weathered saprolite grit aquifer has moderate to high transmissivities (4–50 m2 day−1) and is capable of producing from less than 5 to over 230 kl day−1 of ground water, which is often of a quality suitable for livestock. Yields are influenced by the variability in the permeability of isovolumetrically weathered materials from which the aquifer is derived.

The overlying aquitard has a low transmissivity (< 1 m2 day−1), especially when deeply weathered, indurated and silicified. The transmissivity of the variably weathered sedimentary materials ranges from less than 0.5 m2 day−1 to over 10 m2 day−1, depending on the texture of the materials and their position within the landscape. Higher transmissivity zones may occur as discrete layers of coarser textured materials. The salinity of the saprolite and sedimentary aquifers ranges from less than 2000 mgl−1 to greater than 250000 mgl−1 (total dissolved solids; TDS), depending on position within the landscape. Secondary soil salinization develops when groundwater discharge occurs from either saprolite or sedimentary aquifers.  相似文献   


13.
There are few studies on the hydrogeology of sedimentary rock aquitards although they are important controls in regional ground water flow systems. We formulate and test a three-dimensional (3D) conceptual model of ground water flow and hydrochemistry in a fractured sedimentary rock aquitard to show that flow dynamics within the aquitard are more complex than previously believed. Similar conceptual models, based on regional observations and recently emerging principles of mechanical stratigraphy in heterogeneous sedimentary rocks, have previously been applied only to aquifers, but we show that they are potentially applicable to aquitards. The major elements of this conceptual model, which is based on detailed information from two sites in the Maquoketa Formation in southeastern Wisconsin, include orders of magnitude contrast between hydraulic diffusivity (K/S(s)) of fractured zones and relatively intact aquitard rock matrix, laterally extensive bedding-plane fracture zones extending over distances of over 10 km, very low vertical hydraulic conductivity of thick shale-rich intervals of the aquitard, and a vertical hydraulic head profile controlled by a lateral boundary at the aquitard subcrop, where numerous surface water bodies dominate the shallow aquifer system. Results from a 3D numerical flow model based on this conceptual model are consistent with field observations, which did not fit the typical conceptual model of strictly vertical flow through an aquitard. The 3D flow through an aquitard has implications for predicting ground water flow and for planning and protecting water supplies.  相似文献   

14.
Excessive groundwater withdrawal has caused severe land subsidence worldwide. The pore water pressure and the deformation of pumped hydrostratigraphic units are complex. A fully coupled three-dimensional numerical simulation was carried out for different pumping plans in this paper. When groundwater is pumped from a confined aquifer, the great compaction occurs in the pumped aquifer and its upper and lower adjacent aquitard units. Land subsidence is smaller and the area affected by land subsidence is greater when groundwater is pumped from the deeper confined aquifer. The pore water pressure in the pumped confined aquifer changes immediately with pumpage. In the adjacent aquitard units, however, the pore water pressure increases in the early pumping time and decreases in the early recharging time. The decrease in the pore water pressure vertically spreads from the interface between aquitard and pumped aquifer to the other surface of the aquitard. The pumped aquifer compacts and rebounds immediately with pumping and non-pumping or recharging actions, while the compaction and rebounding of the aquitard units clearly lag behind. The compaction of the adjacent aquitard unit first occurs near the interface between aquitard and pumped aquifer units, and the compaction zone spreads outward as the pumping goes on. The aquitards may expand vertically within some zones. Due to the inelastic deformation of soil skeleton, different pumping plans result in different land subsidence. For the same net pumpage, maximal land subsidence and horizontal displacement are the smallest for constant discharge and the greatest for recharge-discharge cycle.  相似文献   

15.
In eastern England the Chalk aquifer is covered by extensive Pleistocene deposits which influence the hydraulic conditions and hydrochemical nature of the underlying aquifer. In this study, the results of geophysical borehole logging of groundwater temperature and electrical conductivity and depth sampling for major ion concentrations and stable isotope compositions (δ18O and δ2H) are interpreted to reveal the extent and nature of the effective Chalk aquifer of north Norfolk. It is found that the Chalk aquifer can be divided into an upper region of fresh groundwater, with a Cl concentration of typically less than 100 mg l−1, and a lower region of increasingly saline water. The transition between the two regions is approximately 50 m below sea-level, and results in an effective aquifer thickness of 50–60 m in the west of the area, but less than 25 m where the Eocene London Clay boundary is met in the east of the area. Hydrochemical variations in the effective aquifer are related to different hydraulic conditions developed in the Chalk. Where the Chalk is confined by low-permeability Chalky Boulder Clay, isotopically depleted groundwater (δ18O less than −7.5‰) is present, in contrast to those areas of unconfined Chalk where glacial deposits are thin or absent (δ18O about −7.0‰). The isotopically depleted groundwater is evidence for groundwater recharge during the late Pleistocene under conditions when mean surface air temperatures are estimated to have been 4.5°C cooler than at the present day, and suggests long groundwater residence times in the confined aquifer. Elevated molar Mg:Ca ratios of more than 0.2 resulting from progressive rock-water interaction in the confined aquifer also indicate long residence times. A conceptual hydrochemical model for the present situation proposes that isotopically depleted groundwater, occupying areas where confined groundwater dates from the late Pleistocene, is being slowly modified by both diffusion and downward infiltration of modem meteoric water and diffusive mixing from below with an old saline water body.  相似文献   

16.
Xi Chen  Xunhong Chen   《Journal of Hydrology》2003,280(1-4):246-264
During a flood period, stream-stage increases induce infiltration of stream water into an aquifer; subsequent declines in stream stage cause a reverse motion of the infiltrated water. This paper presents the results of the water exchange rate between a stream and aquifer, the storage volume of the infiltrated stream water in the surrounding aquifer (bank storage), and the storage zone. The storage zone is the part of aquifer where groundwater is replaced by stream water during the flood. MODFLOW was used to simulate stream–aquifer interactions and to quantify rates of stream infiltration and return flow. MODPATH was used to trace the pathlines of the infiltrated stream water and to determine the size of the storage zone. Simulations were focused on the analyses of the effects of the stream-stage fluctuation, aquifer properties, the hydraulic conductivity of streambed sediments, regional hydraulic gradients, and recharge and evapotranspiration (ET) rates on stream–aquifer interactions. Generally, for a given stream–aquifer system, larger flow rates result from larger stream-stage fluctuations; larger storage volumes and storage zones are produced by larger and longer-lasting fluctuations. For a given stream-stage hydrograph, a lower-permeable streambed, an aquitard, or an anisotropic aquifer of low vertical hydraulic conductivity can significantly reduce the rate of infiltration and limit the size of the storage zone. The bank storage solely caused by the stage fluctuation differs slightly between gaining and losing streams. Short-term rainfall recharge and ET loss in the shallow groundwater slightly influence on the flow rate, but their effects on bank storage in a larger area for a longer period can be considerable.  相似文献   

17.
This study presents analytical solutions of the three‐dimensional groundwater flow to a well in leaky confined and leaky water table wedge‐shaped aquifers. Leaky wedge‐shaped aquifers with and without storage in the aquitard are considered, and both transient and steady‐state drawdown solutions are derived. Unlike the previous solutions of the wedge‐shaped aquifers, the leakages from aquitard are considered in these solutions and unlike similar previous work for leaky aquifers, leakage from aquitards and from the water table are treated as the lower and upper boundary conditions. A special form of finite Fourier transforms is used to transform the z‐coordinate in deriving the solutions. The leakage induced by a partially penetrating pumping well in a wedge‐shaped aquifer depends on aquitard hydraulic parameters, the wedge‐shaped aquifer parameters, as well as the pumping well parameters. We calculate lateral boundary dimensionless flux at a representative line and investigate its sensitivity to the aquitard hydraulic parameters. We also investigate the effects of wedge angle, partial penetration, screen location and piezometer location on the steady‐state dimensionless drawdown for different leakage parameters. Results of our study are presented in the form of dimensionless flux‐dimensionless time and dimensionless drawdown‐leakage parameter type curves. The results are useful for evaluating the relative role of lateral wedge boundaries and leakage source on flow in wedge‐shaped aquifers. This is very useful for water management problems and for assessing groundwater pollution. The presented analytical solutions can also be used in parameter identification and in calculating stream depletion rate and volume. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

18.
The problem of seawater intrusion in a confined coastal aquifer is investigated. The aquifer is overlain by a leaky aquitard and both units extend continuously out under the sea. The problem is formulated in terms of the two governing differential equations, the fluid continuity equation written conveniently in terms of equivalent freshwater head, and the mass continuity equation. Use of linear rectangular finite elements, with direct integration and an iterative solution technique lead to an efficient numerical scheme that is capable of handling long simulation periods. The results, for a 300 m thick aquifer overlain by a 100 m thick aquitard, show that the aquitard has a controlling influence on the salt distribution. A zone of mixing in the aquifer is found to extend for several kilometres in the seaward as well as the landward direction. The time period required by the system to attain a state of dynamic equilibrium after a perturbation is applied may be of the order of centuries. The aquitard is found to cause a downward and seaward displacement of the average salt front.  相似文献   

19.
Aquifer vulnerability to pesticide migration through till aquitards   总被引：1，自引：0，他引：1  
This study investigates the influence of key factors-mainly recharge rate and degradation half-life--on downward migration of the widely used pesticide mecoprop (MCPP) through a typical clayey till aquitard. The study uses the numerical model FRAC3Dvs, which is a three-dimensional discrete fracture/matrix diffusion (DFMD) numerical transport model. The model was calibrated with laboratory and field data from a site near Havdrup, Denmark, but the overall findings are expected to be relevant to many other sites in similar settings. Fracture flow and MCPP transport parameters for the model were obtained through calibration using well-characterized laboratory experiments with large (0.5 m diameter by 0.5 m high) undisturbed columns of the fractured till and a field experiment. A second level of upscaling and sensitivity analysis was then carried out using data on hydraulic head, fracture spacing, and water budget from the field site. The simulations of downward migration of MCPP show that MCPP concentration and mass flux into the underlying aquifer, and hence the aquifer vulnerability to this pesticide compound, is mainly dependent on the degradation rate of the pesticide, the overall aquitard water budget, and the ground water recharge rate into the aquifer. The influence of flow rate, matrix diffusion, and degradation rate are intertwined. This results in one to four orders of magnitude higher MCPP flux into the aquifer from aquifer recharge rates of 20 and 120 mm/yr, respectively, for no degradation and MCPP half-life of 0.5 yr. From a sensitivity analysis it was found that the range of MCPP flux into the aquifer varied less than one order of magnitude due to (1) changing fracture spacing from 1 to 10 m, or (2) preferential flow along inclined thin sand layers, which represent common conditions for the current and other settings of clayey till in Denmark and other glaciated areas in Europe and North America. The results indicate that for aquifers overlain by fractured clayey tills, the vulnerability to contamination with pesticides (pesticide flux into the aquifer) and other widespread agricultural contaminants is going to vary strongly in the watershed as a function of the distribution of aquitard water budget (flow rate) and aquitard redox environment (controlling contaminant degradation rates), even if the thickness of the till is relatively constant. DFMD modeling of cause-effect relationships within such systems has great potential to support decisions in planning, regulation, and contaminant remediation.  相似文献   

20.
Pumping test evaluation of stream depletion parameters   总被引：1，自引：0，他引：1  
Lough HK  Hunt B 《Ground water》2006,44(4):540-546
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号