首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Closed‐form solutions are proposed for natural seepage in semiconfined (leaky) aquifers such as those existing below the massive Champlain Sea clay layers in the Saint‐Lawrence River Valley. The solutions are for an ideal horizontal leaky aquifer below an ideal aquitard that may have either a constant thickness and a constant hydraulic head at its surface, or a variable thickness and a variable hydraulic head at its surface. A few simplifying assumptions were needed to obtain the closed‐form solutions. These have been verified using a finite element method, which did not make any of the assumptions but gave an excellent agreement for hydraulic heads and groundwater velocities. For example, the difference between the two solutions was smaller than 1 mm for variations in the 5 to 8 m range for the hydraulic head in the semiconfined aquifer. Note that fitting the hydraulic head data of monitoring wells to the theoretical solutions gives only the ratio of the aquifer and aquitard hydraulic conductivities, a clear case of multiple solutions for an inverse problem. Consequently, field permeability tests in the aquitard and the aquifer, and pumping tests in the aquifer, are still needed to determine the hydraulic conductivity values.  相似文献   

2.
Pumping test evaluation of stream depletion parameters   总被引:1,自引:0,他引:1  
Lough HK  Hunt B 《Ground water》2006,44(4):540-546
  相似文献   

3.
A mathematical model that describes the drawdown due to constant pumpage from a finite radius well in a two‐zone leaky confined aquifer system is presented. The aquifer system is overlain by an aquitard and underlain by an impermeable formation. A skin zone of constant thickness exists around the wellbore. A general solution to a two‐zone leaky confined aquifer system in Laplace domain is developed and inverted numerically to the time‐domain solution using the modified Crump (1976) algorithm. The results show that the drawdown distribution is significantly influenced by the properties and thickness of the skin zone and aquitard. The sensitivity analyses of parameters of the aquifer and aquitard are performed to illustrate their effects on drawdowns in a two‐zone leaky confined aquifer system. For the negative‐skin case, the drawdown is very sensitive to the relative change in the formation transmissivity. For the positive‐skin case, the drawdown is also sensitive to the relative changes in the skin thickness, and both the skin and formation transmissivities over the entire pumping period and the well radius and formation storage coefficient at early pumping time. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

4.
Importance of the vadose zone in analyses of unconfined aquifer tests   总被引:5,自引:0,他引:5  
Moench AF 《Ground water》2004,42(2):223-233
Analytical models commonly used to interpret unconfined aquifer tests have been based on upper-boundary (water table) conditions that do not adequately address effects of time-varying drainage from the vadose zone. As a result, measured and simulated drawdown data may not agree and hydraulic parameters may be inaccurately estimated. A 72-hour aquifer test conducted in Cape Cod, Massachusetts, in a slightly heterogeneous, coarse-grained, glacial outwash deposit was found to be a good candidate for testing models with different upper-boundary conditions. In general, under the commonly invoked assumption of instantaneous drainage, measured and simulated drawdowns were found to agree with one another only at late time and early time. In the intermediate-time range, because of delayed drainage, measured drawdowns always exceeded simulated values, most noticeably in piezometers located near the water table. To reduce these discrepancies, an analytical model was developed that can fully account for time-varying drainage given that the aquifer is not strongly heterogeneous. The approach is flexible as the model, which makes use of empirical relations, does not constrain drainage to follow any particular functional relation. By this approach, measured and simulated drawdowns agree over the complete time range, and the estimated parameters are consistent with prior studies and with what is known about the aquifer geometry, stratigraphy, and composition. By properly accounting for vadose zone drainage, it was found that realistic estimates of all hydraulic parameters, including specific yield, could be obtained with or without the use of late-time data.  相似文献   

5.
The buried-valley aquifers that are common in the glacial deposits of the northern hemisphere are a typical case of the strip aquifers that occur in many parts of the world. Pumping from a narrow strip aquifer leads to much greater drawdown and much more distant drawdown effects then would occur in a sheet aquifer with a similar transmissivity and storage coefficient. Widely used theories for radial flow to wells, such as the Theis equation, are not appropriate for narrow strip aquifers. Previously published theory for flow to wells in semiconfined strip aquifers is reviewed and a practical format of the type curves for pumping-test analysis is described. The drawdown response of strip aquifers to pumping tests is distinctive, especially for observation wells near the pumped well. A case study is presented, based on extensive pumping test experience for the Estevan Valley Aquifer in southern Saskatchewan, Canada. Evaluation of groundwater resources in such buried-valley aquifers needs to take into account the unusually large drawdowns in response to pumping.  相似文献   

6.
This study presents analytical solutions of the three‐dimensional groundwater flow to a well in leaky confined and leaky water table wedge‐shaped aquifers. Leaky wedge‐shaped aquifers with and without storage in the aquitard are considered, and both transient and steady‐state drawdown solutions are derived. Unlike the previous solutions of the wedge‐shaped aquifers, the leakages from aquitard are considered in these solutions and unlike similar previous work for leaky aquifers, leakage from aquitards and from the water table are treated as the lower and upper boundary conditions. A special form of finite Fourier transforms is used to transform the z‐coordinate in deriving the solutions. The leakage induced by a partially penetrating pumping well in a wedge‐shaped aquifer depends on aquitard hydraulic parameters, the wedge‐shaped aquifer parameters, as well as the pumping well parameters. We calculate lateral boundary dimensionless flux at a representative line and investigate its sensitivity to the aquitard hydraulic parameters. We also investigate the effects of wedge angle, partial penetration, screen location and piezometer location on the steady‐state dimensionless drawdown for different leakage parameters. Results of our study are presented in the form of dimensionless flux‐dimensionless time and dimensionless drawdown‐leakage parameter type curves. The results are useful for evaluating the relative role of lateral wedge boundaries and leakage source on flow in wedge‐shaped aquifers. This is very useful for water management problems and for assessing groundwater pollution. The presented analytical solutions can also be used in parameter identification and in calculating stream depletion rate and volume. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

7.
Detecting and quantifying small drawdown at observation wells distant from the pumping well greatly expands the characterized aquifer volume. However, this detection is often obscured by water level fluctuations such as barometric and tidal effects. A reliable analytical approach for distinguishing drawdown from nonpumping water‐level fluctuations is presented and tested here. Drawdown is distinguished by analytically simulating all pumping and nonpumping water‐level stresses simultaneously during the period of record. Pumping signals are generated with Theis models, where the pumping schedule is translated into water‐level change with the Theis solution. This approach closely matched drawdowns simulated with a complex three‐dimensional, hypothetical model and reasonably estimated drawdowns from an aquifer test conducted in a complex hydrogeologic system. Pumping‐induced changes generated with a numerical model and analytical Theis model agreed (RMS as low as 0.007 m) in cases where pumping signals traveled more than 1 km across confining units and fault structures. Maximum drawdowns of about 0.05 m were analytically estimated from field investigations where environmental fluctuations approached 0.2 m during the analysis period.  相似文献   

8.
Excessive groundwater withdrawal has caused severe land subsidence worldwide. The pore water pressure and the deformation of pumped hydrostratigraphic units are complex. A fully coupled three-dimensional numerical simulation was carried out for different pumping plans in this paper. When groundwater is pumped from a confined aquifer, the great compaction occurs in the pumped aquifer and its upper and lower adjacent aquitard units. Land subsidence is smaller and the area affected by land subsidence is greater when groundwater is pumped from the deeper confined aquifer. The pore water pressure in the pumped confined aquifer changes immediately with pumpage. In the adjacent aquitard units, however, the pore water pressure increases in the early pumping time and decreases in the early recharging time. The decrease in the pore water pressure vertically spreads from the interface between aquitard and pumped aquifer to the other surface of the aquitard. The pumped aquifer compacts and rebounds immediately with pumping and non-pumping or recharging actions, while the compaction and rebounding of the aquitard units clearly lag behind. The compaction of the adjacent aquitard unit first occurs near the interface between aquitard and pumped aquifer units, and the compaction zone spreads outward as the pumping goes on. The aquitards may expand vertically within some zones. Due to the inelastic deformation of soil skeleton, different pumping plans result in different land subsidence. For the same net pumpage, maximal land subsidence and horizontal displacement are the smallest for constant discharge and the greatest for recharge-discharge cycle.  相似文献   

9.
Flow to a well in a five-layer system with application to the Oxnard Basin   总被引:3,自引:2,他引:1  
Li Y  Neuman SP 《Ground water》2007,45(6):672-682
Nearly 40 years ago, Neuman (1968) developed an analytical solution for drawdown in a system of three aquifers separated by two aquitards when one of the aquifers is pumped at a constant rate. Whereas the simpler case of two aquifers separated by one aquitard has been presented by Neuman and Witherspoon (1969a), the full five-layer solution has not been previously evaluated. We do so here using numerical inversion of its Laplace-transformed version and present selected results graphically in dimensionless form. The solution demonstrates that the effect of pumping propagates across all five layers, adding emphasis to a question previously raised by Neuman and Witherspoon about the validity of leaky aquifer theories that disregard drawdowns in unpumped aquifers. A large-scale, long-term pumping test spanning three aquifers separated by two aquitards near Oxnard, California, has been conducted and analyzed by Neuman and Witherspoon (1972). They evaluated the vertical hydraulic diffusivities of the aquitards using the Neuman-Witherspoon ratio method and their specific storage values on the basis of laboratory consolidation tests. We reinterpret the Oxnard pumping test by coupling the five-layer analytical solution of Neuman (1968) with the parameter estimation code PEST (Doherty 2002) and validate our results against drawdowns from a subsequent pumping test at the site. Our parameter estimates compare favorably with those of Neuman and Witherspoon (1972).  相似文献   

10.
A series of numerical simulations using a fully coupled poroelastic numerical model is performed to analyze the so-called Rhade effect. A three-layer aquifer system composed of two aquifers separated by an aquitard, and a corresponding single-layer aquifer system composed of an equivalent lumped material are simulated for the purpose of comparison. In the numerical simulation of the layered aquifer system, the Rhade effect is observed in the aquitard and upper aquifer immediately after the stop of groundwater pumping from the lower aquifer. In contrast, the numerical simulation results of the lumped aquifer system do not show such Rhade effect throughout the entire domain during the groundwater pumping shutoff period. These numerical simulation results strongly suggest that hydraulically less permeable and mechanically more deformable aquitards that generally exist in layered aquifer systems particularly play an important role in causing the Rhade effect at the end of groundwater pumping. The Rhade effect is caused by two mechanisms: a slower hydraulic propagation (head recovery) of the unpumping stress than its mechanical propagation (extension) from the pumped aquifer into the adjacent aquitard and unpumped aquifer due to the relatively lower hydraulic conductivity of the aquitard, and an amplification of the faster mechanical propagation (excessive extension) in the lower part of the aquitard due to its relatively higher deformability. However, the unpumping stress is evenly distributed throughout the entire domain of the lumped aquifer system over time without such hydrogeomechanical mechanisms since it does not have an aquitard and hence is hydraulically and mechanically homogeneous.  相似文献   

11.
The interaction between a gaining stream and a water-table aquifer is studied at an outwash plain. The aquifer is hydraulically well connected to the stream. Pumping tests were carried out in 1997 and 1998 in two wells 60 m from the stream, screening different depths of the aquifer. Drawdown was measured on both sides of the stream. Hydraulic head, drawdown, and stream depletion data were analyzed using numerical flow models. Similar models were fitted to each of two different data sets: Model A was fitted to steady-state hydraulic head and streamflow gain data not influenced by pumping; and model B was fitted to drawdown data measured during the 1998 pumping test. Each calibrated model closely fits its calibration data; however, predictions were biased if model A was used to predict the calibration data of model B, and vice versa. To further test the models, they were used to predict streamflow depletion during the two pumping tests as well as the drawdown during the 1997 test. Neither of these data were used for calibration. Model A predicted the measured depletions fairly accurately during both tests, whereas the predicted drawdowns in 1997 were significantly larger than actually measured. Contrary to this, the 1997 drawdowns predicted by model B were nearly unbiased; the predicted depletions deviate significantly from the measured depletions in 1997, but they compare well with the observations in 1998. Thus, although field work and analyses were extensive and done carefully to develop a ground water flow model that could predict both drawdown and streamflow depletion, the model predictions are biased. Analyses indicate that the deviations between model and data may be because of error in the models' representations of either the release of water from storage or of the hydrology in the riparian zone.  相似文献   

12.
This paper deals with water pumping cost minimization, in a confined infinite aquifer, proposing an alternate pulsed pumping schedule. The transient flow analysis is conducted for two wells with equal pumping rates. Specifically, two pumping schedules are analytically compared. In the first case, well users pump simultaneously, and in the second one they cooperate so that they pump alternately. This paper proves that the proposed alternate pumping schedule works as a stabilizer, reducing the high hydraulic drawdowns values, regardless of the aquifer characteristics. Moreover, pumping alternately is better in terms of pumping cost, compared to simultaneous pumping, though benefit become negligible as distance between wells becomes large. Two simplified equations are proposed, one to find the difference of the hydraulic drawdowns between the two pumping schedules and the other one to find the economic benefit of each well from cooperation. The equations are finally applied to a number of cases and their results are compared to the results obtained from an algorithm created to calculate the hydraulic drawdowns and the pumping cost, using the Theis equation. The results can be very useful in irrigation scheduling, as they can be applied to systems of well users/farmers, to reduce pumping cost.  相似文献   

13.
We address the question of the reciprocity of drawdowns observed during a sequence of interference pumping tests performed within a porous medium, in the context of different conceptual models of subsurface flow. We provide a generalization of the work by Bruggeman (1972) [5], extending his results obtained in 1972 for Darcian flows in an unbounded, heterogeneous porous medium. We then analyze reciprocity within a dual-continuum conceptualization, where the medium is viewed as being composed of two overlapping continua, representing the porous matrix and embedded fractures, respectively. We show theoretically, and demonstrate numerically, that only drawdowns associated with the fracture continuum display reciprocity under transient flow conditions. Conversely, non-flowing matrix and fracture continua display reciprocity behavior under steady-state conditions. We then provide field evidence of the insurgence of reciprocity gaps by analyzing interference test data from the karstic limestone aquifer of the Hydrogeological Experimental Site (HES) in Poitiers, France. On the basis of our theoretical results and experimental observations, we discuss different interpretations of the observed reciprocity gaps. These include (a) non-linear dependencies of local hydraulic parameters, (b) occurrence of internal boundaries within the domain, (c) inertial effects that develop through open conduits within the rock matrix, (d) modifications of the aquifer properties between subsequent pumping tests, and (e) significant contribution of the matrix pressure in monitored wells when the behavior of the aquifer is conceptualized by a dual-continuum approach.  相似文献   

14.
A hydrodynamic model which takes into account the aquitard storage effect was developed for the deep multilayered system including the Dogger aquifer and its surroundings in the Paris Basin. It provides a good explanation for a series of observations in the Dogger concerning, for instance, the hydraulic head, the salinity and the transmissivity. The calibration of the model also makes it possible to estimate some unmeasured parameters such as the aquifer and aquitard storage coefficients. Finally, the results of simulations of the transport of 4He and 14C strengthen the representativeness of the model. The Darcy average horizontal velocity in the Dogger, obtained with the model, is of the order of 0.33m year−1.  相似文献   

15.
Abstract

An approach for better understanding of the physical implication of estimated aquifer parameters is demonstrated by analysing the pumping test data at Cottam in the Nottingham aquifer, UK. A sensitivity analysis showed that the area represented by the estimated parameters was much smaller than the area covered by the depression cone. After parameters are estimated, further research should be carried out to understand what portions of the aquifer the parameters represent. The parameters estimated at Cottam represented mainly aquifer features between roughly 100 and 2000 m. The sensitivity analysis also showed that the observed drawdown being satisfactorily matched by a model with uniform parameters does not prove that the aquifer is homogeneous. Slightly anomalous data may imply the existence of large anomalous zones. Although the drawdowns at Cottam could be ‘satisfactorily’ fitted by a model with uniform parameters, the fit could be improved by a model using a more permeable aquifer but with a zone about 700 m wide and with 42% less transmissivity.  相似文献   

16.
In this study, we attempted to analyse a drawdown pattern around a pumping well in an unconfined sandy gravelly aquifer constructed in a laboratory tank by means of both experimental and numerical modelling of groundwater flow. The physical model consisted of recharge, aquifer and discharge zones. Permeability and specific yield of the aquifer material were determined by Dupuit approximation under steady‐state flow and stepwise gravitational drainage of groundwater, respectively. The drawdown of water table in pumping and neighbouring observation wells was monitored to investigate the effect of no‐flow boundary on the drawdown pattern during pumping for three different boundary conditions: (i) no recharge and no discharge with four no‐flow boundaries (Case 1); (ii) no recharge and reservoir with three no‐flow boundaries (Case 2); (iii) recharge and discharge with two no‐flow boundaries (Case 3). Based on the aquifer parameters, numerical modelling was also performed to compare the simulated drawdown with that observed. Results showed that a large difference existed between the simulated drawdown and that observed in wells for all cases. The reason for the difference could be explained by the formation of a curvilinear type water table between wells rather than a linear one due to a delayed response of water table in the capillary fringe. This phenomenon was also investigated from a mass balance study on the pumping volume. The curvilinear type of water table was further evidenced by measurement of water contents at several positions in the aquifer between wells using time domain reflectometry (TDR). This indicates that the existing groundwater flow model applicable to an unconfined aquifer lacks the capacity to describe a slow response of water table in the aquifer and care should be taken in the interpretation of water table formation in the aquifer during pumping. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

17.
Air flows from the atmosphere into an unconfined aquifer when the water table falls during pumping tests. Pumping test results in unconfined aquifers may be significantly affected by low‐permeability zones (LPZs) near the initial water table position, because they restrict the downward movement of air. A transient, three‐dimensional air–water two‐phase flow model is employed to investigate numerically the effects of local heterogeneity on pumping test results in unconfined aquifers. Two cases of local heterogeneities are considered herein: a LPZ around the pumping well and on one side of the pumping well. Results show that the drawdown with the LPZ is significantly greater than that of the homogeneous aquifer. The differences in drawdown are the most significant at intermediate times and gradually diminish at later times. The LPZ significantly reduces air flow from the atmosphere to the aquifer. The pore air velocity in the LPZ is very low. The air pressure at the observation point under the LPZ when air begins to enter is significantly lower than the air pressure of the homogeneous aquifer at the same point. After that, the air pressure increases quickly and then increases slowly. The time for the air pressure to reach the atmospheric pressure is significantly longer. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

18.
Butler JJ  Zhan X  Zlotnik VA 《Ground water》2007,45(2):178-186
The impact of ground water pumping on nearby streams is often estimated using analytic models of the interconnected stream-aquifer system. A common assumption of these models is that the pumped aquifer is underlain by an impermeable formation. A new semianalytic solution for drawdown and stream depletion has been developed that does not require this assumption. This solution shows that pumping-induced flow (leakage) through an underlying aquitard can be an important recharge mechanism in many stream-aquifer systems. The relative importance of this source of recharge increases with the distance between the pumping well and the stream. The distance at which leakage becomes the primary component of the pumping-induced recharge depends on the specific properties of the aquifer, aquitard, and streambed. Even when the aquitard is orders of magnitude less transmissive than the aquifer, leakage can be an important recharge mechanism because of the large surface area over which it occurs. Failure to consider aquitard leakage can lead to large overestimations of both the drawdown produced by pumping and the contribution of stream depletion to the pumping-induced recharge. The ramifications for water resources management and water rights adjudication can be significant. A hypothetical example helps illustrate these points and demonstrates that more attention should be given to estimating the properties of aquitards underlying stream-aquifer systems. The solution presented here should serve as a relatively simple but versatile tool for practical assessments of pumping-induced stream-aquifer interactions. However, this solution should not be used for such assessments without site-specific data that indicate pumping has induced leakage through the aquitard.  相似文献   

19.
We present a novel method to estimate the hydraulic and storage properties of a heterogeneous aquifer system using pilot-point-based hydraulic tomography (HT) inversion in conjunction with a geophysical a priori model. The a priori model involved a soil stratification obtained by combining electrical resistivity tomography inversion and field data from hydrogeological experiments. Pilot-point densities were assigned according to the stratification, which also constrained aquifer parameters during HT inversion. The forward groundwater flow model, HydroGeoSphere, was supplied to the parameter-estimation tool, PEST, to perform HT inversion. The performance of our method was evaluated on a hypothetical, two-dimensional, multi-layered, granitic aquifer system representative of those commonly occurring in the Kandi region in Telangana. Inversion results were compared using two commonly adopted methods of modeling parameter-heterogeneity: (1) using piece-wise zones of property values obtained from geostatistical interpolation of local-scale estimates; and (2) HT inversion starting from a homogeneous parameter field with a uniform distribution of pilot-points. Performances of the inverted models were evaluated by conducting independent pumping tests and statistical analyses (using a Taylor diagram) of the model-to-measurement discrepancies in drawdowns. Our results showed that using the aforementioned geophysical a priori model could improve the parameter-estimation process.  相似文献   

20.
Measuring the hydraulic conductivity of shallow submerged sediments   总被引:4,自引:0,他引:4  
Kelly SE  Murdoch LC 《Ground water》2003,41(4):431-439
The hydraulic conductivity of submerged sediments influences the interaction between ground water and surface water, but few techniques for measuring K have been described with the conditions of the submerged setting in mind. Two simple, physical methods for measuring the hydraulic conductivity of submerged sediments have been developed, and one of them uses a well and piezometers similar to well tests performed in terrestrial aquifers. This test is based on a theoretical analysis that uses a constant-head boundary condition for the upper surface of the aquifer to represent the effects of the overlying water body. Existing analyses of tests used to measure the hydraulic conductivity of submerged sediments may contain errors from using the same upper boundary conditions applied to simulate terrestrial aquifers. Field implementation of the technique requires detecting minute drawdowns in the vicinity of the pumping well. Low-density oil was used in an inverted U-tube manometer to amplify the head differential so that it could be resolved in the field. Another technique was developed to measure the vertical hydraulic conductivity of sediments at the interface with overlying surface water. This technique uses the pan from a seepage meter with a piezometer fixed along its axis (a piezo-seep meter). Water is pumped from the pan and the head gradient is measured using the axial piezometer. Results from a sandy streambed indicate that both methods provide consistent and reasonable estimates of K. The pumping test allows skin effects to be considered, and the field data show that omitting the skin effect (e.g., by using a single well test) can produce results that underestimate the hydraulic conductivity of streambeds.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号