共查询到20条相似文献,搜索用时 281 毫秒
1.
本文在分析传统道路与建筑物空间冲突算法的基础上,借鉴其优点,从保持建筑物间的整体空间布局特征,以及模拟人工移位的处理方法角度出发,提出根据区域密集程度的不同,划分为稀疏区、密集区、高密集区三个等级区域,并制定相应的多层次移位处理原则,然后,根据道路与建筑物的邻近程度,将建筑物分为多等级的移位层,对移位层内的冲突进一步细分;据此,依据移位层的邻近程度,将多层次处理原则贯穿于要素冲突外力的计算、外力的聚合以及其移位算法的确定中,分别对道路与建筑物的冲突、建筑物之间的冲突分别进行处理。 相似文献
2.
针对地图综合中解决空间冲突最复杂的移位算子,使地图地理要素清晰及其拓扑关系不变,该文以线要素为研究目标,利用Snake算法进行地图综合中的道路网移位,并且进行改进:1在线要素群移位前,引入了线要素的移位空间判断,找出其中可以移位的线目标和无法移位的线目标,将这两种目标分开移位,优先移动可以移位的线目标;2提出一种能确定线要素瓶颈特征的方法,并分析形状参数α、β的设置与曲线瓶颈特征的关系,保护线要素的瓶颈特征在移位中不被破坏;最后给出了道路网移位实例,证明了方法的有效性。 相似文献
3.
本文以1:50万军事交通图数据库为基础,探讨并研究了数据库支持下的自动制图综合的理论,方法和实施过程:重点研究了地图内容的选取、线状要素的化简和重迭要素的移位问题;尤其是对图形要素的移位,做了较为详细的分析,提出了检查线状要素之间图形重迭的方法及自动移位的具体措施,并给出了用于程序运行的一些详细算法。 相似文献
4.
5.
在地图自动编制中,有时多类地图要素多个空间目标之间同时发生空间冲突,在移位过程中会影响到邻近区域的地图目标,这就需要对地图要素移位进行协同处理。在自动识别邻近空间冲突区的条件下,提出了一种顾及地图制图规则的解决地图目标群空间冲突的协同处理方法,并用参数表方法形式化表达了地形图上地图要素移位的常用制图规则。首先利用约束性Delaunay三角网识别出可能的空间冲突区域,并建立移位操作区;然后,建立移位传播关联线网,依据制图规则在关联线网上以能量最小化Beam移位模型为基础,对整个空间冲突区的地图目标群进行协同移位;最后,用实验验证了所提方法的有效性和适用性。 相似文献
6.
7.
比例射线移位算法处理冲突目标群,能够较好地保持移位后目标群的空间分布模式,常被应用于点群移位。本文在对已有算法的研究基础上,对其进行改进:首先考虑了存在线状要素时点群移位的新情况;其次,提出了可变参数的衰减函数控制模型。最后本文通过实验,演示了算法的有效性。 相似文献
8.
移位是解决地图制图和GIS中空间冲突的基本算子之一。Morphing变换可以实现源对象到目标对象的连续平滑变换,通过从两个方面拓展Morphing变换,从而实现对线要素进行移位。首先分析了线要素空间冲突的类型。在线要素弯曲识别的基础上,以弯曲作为冲突检查和线要素移位的基本单元;然后,用Delaunay三角网探测冲突区域,将冲突位置定义在局部的线要素弯曲(组);最后拓展Morphing变换实施线要素移位,即先对冲突发生弯曲(组)进行镜像变换,再对冲突发生弯曲(组)和它们的镜像进行Morphing变换,并给出了变换参数与移位距离和方向的定量关系。实验证明了该方法有效、可行。引入图形镜像避免了普通Morphing变换中的特征点识别和匹配等两个难点。将弯曲作为冲突发生的范围和化解冲突的操作单元,可以实现要素局部与全局移位的有机统一。 相似文献
9.
10.
11.
介绍了标准旋转抛物面表面精度统计的方法,给出了FAST密云模型反射面表面精度计算的具体方法,得出了最优拟合精度及对应的焦比、平均径向误差等。 相似文献
12.
13.
空间直角坐标转换大地坐标的直接解法 总被引:1,自引:0,他引:1
根据地面点地心空间直角坐标与地心大地坐标的关系式,导出由空间直角坐标求解大地坐标的更为简洁的直接计算公式,并对计算误差进行分析讨论。理论分析和实际验算结果表明,该直接解法引起的纬度误差不大于10-5s,可以满足精密的大地测量需要。 相似文献
14.
K. N. Chari N. C. Pandey G. Mahapatra C. Patro 《Journal of the Indian Society of Remote Sensing》1978,6(2):57-62
In order to prepare schemes for Land reclamation, plantation and permanent settlement of the tribals of shifting cutivation areas in Orrisa a proper survey is a prerequisite. Earlier attempts vaguely idenified these areas. Wide disparity in data are found in the reports from different sources. Interpretation of LANDSAT-1 imagery can be used to study shifting cultivation areas in a scientific way. Lack of forests on sloping land is the chief characteristic of shifting cullivation areas. Landsat observation along with classified slope from topographic sheets provide most reliable and accurate data by minimising human error. 相似文献
15.
16.
进入90年代,数字摄影测量得到了飞速发展,相继有许多数字摄影测量系统出现。本文对数字摄影测量系统的基础之一——数字相对定向作了理论和实验研究,提出了一种基于特征点组的金字塔结构的自动相对定向方法,即用Fstner算子选择定向点,用金字塔结构影像数据相关定向点,最后用最小二乘相关获取的点位进行相对定向计算。实验证明,该方法是可行的,取得了满意的结果。 相似文献
17.
Böttcher H Freibauer A Scholz Y Gitz V Ciais P Mund M Wutzler T Schulze ED 《Carbon balance and management》2012,7(1):5-18
Background
No consensus has been reached how to measure the effectiveness of climate change mitigation in the land-use sector and how to prioritize land use accordingly. We used the long-term cumulative and average sectorial C stocks in biomass, soil and products, C stock changes, the substitution of fossil energy and of energy-intensive products, and net present value (NPV) as evaluation criteria for the effectiveness of a hectare of productive land to mitigate climate change and produce economic returns. We evaluated land management options using real-life data of Thuringia, a region representative for central-western European conditions, and input from life cycle assessment, with a carbon-tracking model. We focused on solid biomass use for energy production.Results
In forestry, the traditional timber production was most economically viable and most climate-friendly due to an assumed recycling rate of 80% of wood products for bioenergy. Intensification towards "pure bioenergy production" would reduce the average sectorial C stocks and the C substitution and would turn NPV negative. In the forest conservation (non-use) option, the sectorial C stocks increased by 52% against timber production, which was not compensated by foregone wood products and C substitution. Among the cropland options wheat for food with straw use for energy, whole cereals for energy, and short rotation coppice for bioenergy the latter was most climate-friendly. However, specific subsidies or incentives for perennials would be needed to favour this option.Conclusions
When using the harvested products as materials prior to energy use there is no climate argument to support intensification by switching from sawn-wood timber production towards energy-wood in forestry systems. A legal framework would be needed to ensure that harvested products are first used for raw materials prior to energy use. Only an effective recycling of biomaterials frees land for long-term sustained C sequestration by conservation. Reuse cascades avoid additional emissions from shifting production or intensification. 相似文献18.
There has been a significant advancement in the application of remote sensing from various space altitudes for inventorying and monitoring ofjhum (shifting) cultivation associated forest loss. The dynamic nature ofjhum system, complex physiography, small size of individualjhum plots and their discontinuous nature of distribution, highly heterogeneous vegetation and ever-changing atmospheric condition in the Arunachal Himalaya posses a great challenge to local flora and fauna. Indian Remote Sensing (IRS)-1C/1D LISS-III data were used to classify the current and abandonedjhum areas in Dibang valley district. The amount of area occupied by current and abandonedjhum corresponds to 199.34 km2(1.53%) and 225.40 km2(1.73%) respectively. Field data were collected following stratified random sampling method to gather information on plant community occurring in abandonedjhum cultivated areas. It was observed that only nine species out of 45 contribute to 50% of the important value index (IVI). Of the 45 species, 7 species (15.56%) have been found to be endemic to Eastern Himalayas. Population inducedjhum cultivation has led to deforestation, biodiversity loss, increased surface soil erosion, and sedimentation of water bodies in this area. The potential use of satellite-derived maps can best be used for better management and land use planning. 相似文献
19.
用GIS进行邻近性分析的方法及应用 总被引:3,自引:0,他引:3
邻近性分析是GIS特有的功能之一,也是GIS相对于其它信息系统的优势之一。邻近分析方法主要应用于研究中心体与周围一定距离的事物之间的关系,这样,可以把比较复杂的问题直观化、科学化,再用GIS的有关数据通过模型分析,得出相当直观的结果,为用户提供较为实用的服务。作者提出了邻近性分析的二种非常简便和实用的方法,并展示了它的应用实例,一种方法是等距缓冲区法及其在城市道路规划中拆迁问题的研究和城市管理中违章建筑问题的研究;另一种方法是等值线法及其在公共设施规划和居住区规划中的应用。用GIS进行邻近性分析真正体现了GIS的“把空间位置数据与属性数据有机地结合起来”,这个突出的特点是其它数据库所不及的。 相似文献
20.
通过真正射影像快速构建三维建筑物场景的方法 总被引:1,自引:1,他引:0
数字摄影测量技术正从单机工作方式向系统集成的工作方式转变,获取和处理空间数据已变得较为容易。在三维数字城市建筑物建模方面,要求必须快速有效地提取建筑物边界,才有可能进行快速的三维景观建模作业。本文提出了利用DSM和真正射影像相结合构建地形景观的一种新方法,首先从真正射影像上提取建筑物的边界线,对建筑物多边形进行三角化处理,视地面模型为一带洞多边形,同样进行Delaunay三角化处理,接着从DSM和DEM获取建筑物的高度信息,构建三维建筑物模型,最后通过纹理映射的方式,对整个建模场景进行纹理贴图,这一方法取得了较好效果,已经在生产实践中得到了应用。 相似文献