共查询到20条相似文献，搜索用时 968 毫秒
1.
A series of three-dimensional finite element analyses of deep excavations with the integrated system between buttress walls and diaphragm walls was conducted to investigate the effect of the buttress wall intervals, treatments, locations, height, and thickness on limiting deformations induced by deep excavation. The integrated retaining system was formed by maintaining buttress walls when soil was excavated. The wall deflection control mechanism of the integrated retaining system mainly came from the combined stiffness between the buttress wall and the diaphragm wall. In addition, the ground settlement control mechanism came from the combined stiffness between the buttress wall and the diaphragm wall, and the frictional resistance between the buttress wall and the surrounding soil. For achieving 50% reduction in the wall deflection and the ground surface settlement, the length and intervals of buttress walls that were applied to the integrated retaining system were at least 4 and 8 m, respectively. When the deflection at the diaphragm wall head was well restrained, for example, by the floor slab, the position of the buttress wall head could be located at a depth the diaphragm wall starts to bulge out. In such a case, the performance between the full height and limited height of buttress walls was quite close. Furthermore, a new well-documented excavation project was analyzed to verify the performance of the integrated retaining system. Results showed that the integrated retaining system worked excellently if the joints between buttress walls and diaphragm walls were constructed properly. 相似文献
2.
Three-dimension finite element analyses of deep excavations with buttress walls were performed to evaluate the effect of buttress wall shapes on limiting movements induced by deep excavation. Results showed that a combination of the rectangular and the capital L-letter shapes (RL-shape) yielded the greatest performance in reducing wall deflections and ground surface settlements. The main deformation-control mechanism mainly came from the horizontal and vertical frictional resistances of buttress walls against adjacent soils which were pushed by wall deflections and the soil heave at the excavation bottom, respectively. Besides, the RL-shape buttress walls were successfully verified through a well-documented case history. 相似文献
3.
Finite-element modeling of a complex deep excavation in Shanghai 总被引：2，自引：0，他引：2
The excavation of the north square underground shopping center of Shanghai South Railway Station is a complex deep excavation
using the top-down construction method. The excavation has a considerable size and is close to the operating Metro Lines.
In order to predict the performance of the excavation more accurately, 3D finite-element analyses are conducted to simulate
the construction of this complex excavation. The effects of the anisotropic soil stiffness, the adjacent excavation, and zone
excavation on the wall deformation are investigated. It is shown that the numerical simulation with anisotropic soil stiffness
yields a more reasonable prediction of the wall deflection than the case with isotropic soil stiffness. The deformation of
the shared diaphragm wall between two excavations is influenced by the construction sequence of the two excavations. The zoned
excavation can greatly reduce the diaphragm wall deformation. However, only the zoned excavation at the first excavation stage
affects the deformation of the walls significantly. When the depth of the excavation increases, the zoned excavation has minor
effect on the deformation of diaphragm walls. 相似文献
4.
Previous plane strain analysis of a case history has shown that cross walls in an excavation can effectively reduce movements induced by deep excavation. This study performed three-dimensional numerical analyses for 4 deep excavation cases with different installations of cross walls, including different excavation depths, cross wall intervals and cross wall depths. Both the observed and computed wall deflections for the 4 cases were compared with those of the same excavations that were assumed with no cross walls installed to demonstrate the effectiveness of cross walls in reducing lateral wall deflections. The results show that the cross wall also had a corner effect similar to that of the diaphragm wall. The deflection of the diaphragm wall was smallest at the location of the cross wall installed and then increased with the increasing distance from the cross wall, up to the midpoint between two cross walls. Many factors such as in situ soil properties, diaphragm wall properties, construction procedure, cross wall depth and so on may affect the amount of reduction in lateral wall deflections due to the installation of cross walls. Under the same condition, the amount of reduction was highly dependent on the depth of cross walls, distance to the cross walls and the cross wall interval. 相似文献
5.
Several case studies have revealed that the installation of cross walls in excavations can effectively reduce the amount of wall deflection and ground settlement. However, the behaviour of the diaphragm wall due to the installation of the cross walls is still unclear. This study performed a series of 3D numerical studies of wall deflections for deep excavations with cross walls and studied the effects on the wall deflection of several parameters, including the number of cross walls, the distance to the cross wall, the cross wall interval, the cross wall height and the cross wall embedment. The results presented in this study can be used as a first approximation for cases in which cross walls are designed to reduce the wall deflection induced by deep excavation. 相似文献
6.
This paper presents a novel strut-free earth retaining wall system for excavation in soft clay, referred to as the rigid and fixed diaphragm (RFD) wall retaining system. The RFD system is comprised of four main structures—diaphragm walls, rib-walls, cross walls, and buttress walls—and a complementary structure—the cap-slab. The characteristics of the RFD system are: (1) the formation of a continuous earth retaining wall by constructing diaphragm walls along the circumference of the excavated zone; (2) the formation of a rigid and fixed retaining wall system by a series of rib-walls and cross walls; and (3) the formation of a rigid retaining wall by buttress walls and the cap-slab. Furthermore, the performance and mechanisms of the RFD system were investigated carefully through three-dimensional finite element analyses. The results demonstrated that the system stiffness of the RFD system was a major factor controlling deformations induced by excavation. Moreover, the excavation geometry determined the dimension of each component of the RFD system.
相似文献7.
采用三维有限差分软件FLAC3D对地下连续墙施工进行模拟,分析苏州地区粉土地层中地连墙施工对土体扰动及周边建筑物影响。利用UBCSAND硬化规律对外部扰动作用下土体强度逐步发挥的力学特性进行表征,模拟开挖过程中浅层土体变形,并对地连墙施工中成槽开挖、钢筋混凝土施工及混凝土硬化进行全过程模拟。计算结果表明,硬化模型较好地反映地连墙施工扰动下浅层土体力学特性;地连墙成槽阶段地层变形随深度的增加而减小,地表以下20 m范围内地层变形显著,而深部土体变形较小;钢筋混凝土浇筑施工对地层变形起到抑制作用;混凝土硬化阶段地层变形趋于稳定。在该基础上采用硬化模型对苏州某基坑地连墙施工进行数值仿真,模拟结果和现场实测吻合较好。 相似文献
8.
Previous studies have shown that use of cross walls in deep excavations can reduce the wall deflection to a very small amount. However, design of cross walls is costly because the deflection behavior of the diaphragm wall with cross walls is in nature three dimensional. The objective of this study was to establish a simplified approach used as a first approximation to design cross walls such that the lateral wall deflection can satisfy a design criterion. A series of parametric studies using a three-dimensional numerical method was performed to obtain the influence factors on wall deflections, including excavation geometry, wall system stiffness, axial stiffness of strut, axial stiffness of the cross wall, normalized undrained shear strength of clay and the cross wall depth. Then, a simplified formula for predicting the wall deflection for excavations without and with cross walls was established using multivariate regression analysis, respectively. The formulas were validated through 36 excavation cases without cross walls and 12 cases with cross walls. The simplified formulas can be used to develop a spreadsheet that estimates the cross wall sizes and intervals based on the entered excavation geometry, material properties of retaining-strut system, in situ undrained shear strength and tolerable wall deflection. The estimated cross wall sizes and intervals should be verified by an appropriate full numerical analysis. 相似文献
9.
Numerous studies have been devoted to the performance of excavations and adjacent facilities. In contrast, few studies have focused on retaining wall deflections induced by pre-excavation dewatering. However, considerable inward cantilever deflections were observed for a diaphragm wall in a pre-excavation dewatering test based on a long and narrow metro excavation, and the maximum deflection reached 10 mm (37.6% of the allowable wall deflection for the project). Based on the test results, a three-dimensional soil–fluid coupled finite element model was established and used to study the mechanism of the dewatering-induced diaphragm wall deflections. Numerical results indicated that the diaphragm wall deflection results from three factors: (1) the seepage force around the dewatering well and the soil–wall interaction caused the inward horizontal displacement of the soil inside the excavation; (2) the reduced total earth pressure on the excavated side of the diaphragm wall above approximately 1/2 of the maximum dewatering depth disequilibrated the original earth pressure on both sides of the diaphragm wall; and (3) the different negative friction on the excavated and retained sides of the diaphragm wall led to the rotation of the diaphragm wall into the excavation. 相似文献
10.
基于室内模型试验,就闭合型与单片地下连续墙基础在竖向承载性能上的差异进行了对比分析,并采用FLAC-3D软件进行数值分析来丰富室内模型试验,探讨了土体变形模量、密度、内聚力以及内摩擦角对闭合型地下连续墙竖向承载力的影响。结果表明：闭合型地下连续墙基础外侧摩阻力的发挥过程与单片地下连续墙基础大致相同,但由于土芯的存在,其内侧摩擦阻力发挥机理更复杂;闭合型与单片地下连续墙基础均可视为端承摩擦型基础;随着墙周土变形模量的增加,闭合型地下连续墙基础竖向位移显著减少,墙体轴力也减少;密度对闭合型地下连续墙基础沉降的影响不显著;内聚力对侧摩擦阻力的影响程度受地下连续墙和土体之间相对位移量的控制;只有闭合型地下连续墙基础的沉降量超过20 mm时,土体内摩擦角才对基础的竖向承载力有较大影响。 相似文献
11.
This paper presents a numerical analysis of the influence of initial stress state on the response of deep excavation supported by retaining wall. Indeed, the influence of diaphragm wall installation prior to excavation works may affect the soil response and lateral wall deflection induced by excavation process. The first part of this paper gives a short review of the numerical methods aimed to reproduce the retaining wall installation. Numerical analysis of a deep excavation in two‐dimensional and three‐dimensional conditions is then performed according to the methods previously presented. In three‐dimensional conditions, diaphragm wall installation is performed considering a sequence of panels, described by their number and length. Results of three‐dimensional calculations confirm that stress state is disturbed by wall installation, which has a sensitive effect on the ground response induced by soil excavation. It is also noted that these results are not easily reproduced in two‐dimensional conditions. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
12.
Deep excavations particularly in deep deposits of soft clay can cause excessive ground movements and result in damage to adjacent buildings. Extensive plane strain finite element analyses considering the small strain effect have been carried out to examine the wall deflections for excavations in soft clay deposits supported by retaining walls and bracing. The excavation geometry, soil strength and stiffness properties, and the wall stiffness were varied to study the wall deflection behavior. Based on these results, a simple Polynomial Regression (PR) model was developed for estimating the maximum wall deflection. Wall deflections computed by this method compare favorably with a number of field and published records. 相似文献
13.
Conventional numerical predictions of deep excavations normally neglect the construction process of the retaining structure and choose the earth pressure at rest as initial condition at the beginning of the simulation. The presented results of simulation and measurements during the construction process of the Taipei National Enterprise Center show, that such an assumption leads to an underestimation of the horizontal wall deflection, the surface ground settlements as well as the loading of the struts in case of normally to slightly over‐consolidated clayey soil deposits. The stepwise installation process of the individual diaphragm wall panels results in a substantial modification of the lateral effective stresses in the adjacent ground. Especially the pouring process of the panel and the fresh concrete pressure causes a partial mobilization of the passive earth pressure and a distinct stress level increase in the upper half of the wall. As a consequence of the increased stresses prior to the pit excavation, up to 15% greater ground and wall movements are predicted. Moreover, the increased stress level due to the installation process of the diaphragm wall leads to substantial higher strut loadings during the excavation of the pit. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
14.
从减少基坑开挖过程中坞墙位移和控制坞壁渗水角度出发,利用数值模拟分析,探讨在深基坑开挖中得到广泛应用的普通土钉墙和用于船坞坞室基坑开挖中的复合土钉墙技术,将联合劲性水泥土搅拌桩的复合土钉墙用于干船坞的坞墙结构。从工程探讨角度,研究土钉联合劲性水泥土搅拌桩、预应力锚杆的复合土钉墙在干船坞这一特定条件下的应用问题,并通过分析模拟结果,为干船坞坞墙设计施工过程中安全问题提出一些注意点 相似文献
15.
随着城市的快速发展,地铁车站周边开发的建筑越来越多,周边建筑施工对地铁车站将产生不可避免的不利影响。本文结合某大型建筑深基坑工程的设计、施工及监测数据,通过有限元计算,分析基坑开挖施工力学特征,研究基坑施工对临近地铁车站的变形影响。研究发现,基坑采用合理的地下连续墙、钻孔灌注桩等围护体系、适当的被动区加固方式、科学的分基坑开挖施工组织等措施,可以保证基坑开挖施工对临近车站的影响在可控制、可接受的范围内,为软土地区类似基坑的设计、施工提供参考经验。 相似文献
16.
围护结构最大侧移所在深度是衡量基坑变形的重要指标之一,而目前鲜有关于其对周边环境变形影响的研究。基于工程实测数据分析和有限元数值模拟,系统地研究了基坑围护结构最大侧移深度对邻近桩基础建筑物不均匀沉降和坑外深层土体位移场的影响。经研究发现：围护结构最大侧移的下移会导致坑外土体位移场扩大,进而降低相应区域的桩基础承载力,导致邻近桩基础建筑物发生显著的不均匀沉降。不同深度的土体经历复杂的竖向位移,且位移形态与围护结构最大侧移深度密切相关。随围护结构最大侧移深度的逐渐下移,坑外土体位移场向深层土体发展,且主要影响范围相应地扩大。在实际工程中,根据基坑周边环境合理地控制围护结构最大侧移所在深度,可有效降低基坑开挖对周边环境的不利影响。 相似文献
17.
The walls of a deep excavation in cohesionless soils below the water table have been supported by a reinforced concrete diaphragm with T-shaped panels. To improve the safety against the risk of local collapse during the panel excavation, the soil surrounding the panels has been treated by deep mixing to a depth of 6?C10?m. The horizontal displacements, induced in the surrounding soil by the installation (deep mixing, slurry supported excavation, placing of the reinforcement cage, concrete casting and curing) of the diaphragm, have been measured by means of inclinometers. It is claimed that they can be a significant fraction of the total displacements induced by the excavation. A back analysis of the observed displacements shows that the deformation process is essentially elastic and can be satisfactorily modelled provided the values of the soil stiffness are properly selected. 相似文献
18.
由于成因及地域性的差异,宁波软土具有鲜明的特点,深基坑变形特性也有别于其它软土地区。在国内外研究基础上,本文结合宁波轨道交通1号线基坑工程,对13个车站地下连续墙深基坑监测数据进行统计分析。从基坑围护结构水平位移和墙后地表沉降两个方面对基坑变形特性进行了研究,结果表明:宁波地区地下连续墙的最大侧移介于0.18%H和0.80%H之间,平均值为0.39%H,较其它地区大,最大侧移位于开挖面附近,且随软土层厚度的增大而增大;宁波地区Fs取值1.7为宜;地表沉降主要分布于0≤d/H≤2.0范围内,最大值δvm=1.2%H,最小值δvm=0.15%H,平均值δvm=0.69%H,地表沉降较大;围护结构侧移与地表沉降关系为δvm=1.0δhm～1.8δhm。最后,结合分析结果,提出了宁波地区深基坑工程变形控制标准,可以为宁波地区及软土地区深基坑工程提供指导和借鉴作用。 相似文献
19.
Mohamed I. Ramadan Ebraheem H. Ramadan Marwan M. Khashila 《Geotechnical and Geological Engineering》2018,36(3):1545-1558
In urban areas, there are many situations where basement of new constructions or underground utilities are proposed to be constructed adjacent to old buildings. Of greatest concern are buildings with shallow foundations that do not extend below the zone of influence of the adjacent excavation. For deep excavation, the presence of a cantilever stage at the beginning of a construction sequence can often lead to excessive movements. Therefore over-excavation can also be a primary cause of excessive movements. In the present study, shallow excavation was considered. Three Dimensional Finite Element (3D FE) study was carried out in the present study. A cantilever contiguous pile wall was selected because it is common and relatively economic to be used in cohesive soil. Parametric study were performed considering excavation depth, pile embedded depth, and wall stiffness. Some design recommendations were given to provide a safe supporting system in clay. 相似文献
20.
为准确评估软土地区基坑施工安全以及对周围环境的影响,开挖过程中的时间和空间影响因素不可忽视。以长江漫滩软土地区某深基坑开挖工程为依托,首先建立考虑顺逆结合施工过程的有限元模型,将地连墙水平位移的计算值与实测值进行对比,验证有限元计算的可靠性;基于理论分析、数值计算和实测数据,采用坑角效应影响系数和等效水平抗力系数来衡量时空效应对支护变形的影响,提出考虑时空效应的地连墙变形计算方法;通过工程实例验证了在软土地区基坑设计计算中考虑时空效应的必要性以及所提计算方法的合理性。该研究成果可为软土地区深基坑变形计算提供有益借鉴。 相似文献