共查询到20条相似文献，搜索用时 515 毫秒
1.
长乐-南澳断裂带晚中生代岩浆活动
与变质-变形关系 总被引：32，自引：2，他引：30
长乐-南澳断裂带是东南沿海地区陆内强烈变质-变形带。带内沉积岩、火山岩和早白垩世的钙碱性角闪石黑云花岗岩和花岗闪长岩都已发生可达角闪岩相的变质和石英-长石相韧性剪切变形。鉴于高温矿物和强烈韧性变形多出现在深成岩附近;远离深成岩,变质和变形就逐渐减弱,故本文认为,至少有一部分变质变形的热源是由岩浆提供的。韧剪组构和糜棱质花岗岩是在岩浆侵位的晚期或长乐-南澳断裂带左旋走滑时,在中地壳部位同时形成的,长乐断裂带中花岗岩的组构记录了一期同走滑变形的岩浆作用,“软变形”作用。据此,长乐-南澳带内花岗岩的形成是受走滑剪切应力和岩浆热双重制约的,是在走滑过程中实现的。其动力来源可能与晚中生代的太平洋板块沿日本中央构造线—台湾纵谷带朝东亚陆缘的斜向俯冲有关。 相似文献
2.
中生代巴彦喀拉-松潘甘孜地体向东昆仑地体斜向俯冲,在东昆仑南缘形成一条巨型的韧性剪切带。剪切带中发育的旋转碎斑、书斜构造、解理阶步、云母鱼、S-C组构、不对称褶皱、雁列脉等宏微观构造,显示剪切带兼具右行和左行的特征,且右行早于左行剪切,但总体以左行剪切为主。对西大滩糜棱岩化花岗岩和小南川未变形花岗岩进行了LA-ICP-MS锆石UPb测年,西大滩岩体侵位于199.3±2.2Ma,小南川岩体形成于196.4±1.3Ma。西大滩与小南川岩体中的锆石为典型的岩浆锆石,其年龄代表了岩体侵位的时代。鉴于2个岩体的变形程度完全不同,东昆仑南缘在199~196Ma之间发生了左行韧性剪切。 相似文献
3.
新疆中天山北缘胜利达坂韧性剪切带 总被引：9，自引：0，他引：9
胜利达坂韧性剪切带沿中天山构造带北缘呈近EW向展布,为一条由一系列糜棱岩带、强片理化带及典型韧性变形显微构造所组成的强应变带。根据变形强度和原岩类型可划分出不同的构造带。显微构造的运动学和动力学分析表明,剪切带经历了早期的由南向北的斜冲推覆剪切及晚期的近水平右行走滑剪切。剪切带内发生了强烈的硅化、碳酸盐化、黄铁矿化、绢云母化和绿泥石化等蚀变,它们与金矿成矿作用关系密切。 相似文献
4.
Analyses of deflected river channels, offset of basement rocks, and fault rock structures reveal that slip sense inversion occurred on major active strike-slip faults in southwest Japan such as the Yamasaki and Mitoke fault zones and the Median Tectonic Line (MTL). Along the Yamasaki and Mitoke fault zones, small-size rivers cutting shallowly mountain slopes and Quaternary terraces have been deflected sinistrally, whereas large-size rivers which deeply incised into the Mio-Pliocene elevated peneplains show no systematically sinistral offset or complicated hairpin-shaped deflection. When the sinistral offsets accumulated on the small-size rivers are restored, the large-size rivers show residual dextral deflections. This dextral offset sense is consistent with that recorded in the pre-Cenozoic basement rocks. S–C fabrics of fault gouge and breccia zone developed in the active fault zones show sinistral shear sense compatible with earthquake focal mechanisms, whereas those of the foliated cataclasite indicate a dextral shear sense. These observations show that the sinistral strike-slip shear fabrics were overprinted on dextral ones which formed during a previous deformation phase. Similar topographic and geologic features are observed along the MTL in the central-eastern part of the Kii Peninsula. Based on these geomorphological and geological data, we infer that the slip sense inversion occurred in the period between the late Tertiary and mid-Quaternary period. This strike-slip inversion might result from the plate rearrangement consequent to the mid-Miocene Japan Sea opening event. This multidisciplinary study gives insight into how active strike-slip fault might evolves with time. 相似文献
5.
Palaeozoic late collisional strike-slip deformations in Tianshan and Altay, Eastern Xinjiang, NW China 总被引：12，自引：0，他引：12
ABSTRACT In Central Asia, thrusts and shear zones resulting from Palaeozoic accretional events were reworked by E–W-trending ductile strike-slip faults during late Palaeozoic–early Mesozoic time. In the Tianshan range, microstructures and quartz C-axis fabrics show a main dextral shearing associated with sinistral localized shear zones. The relationship between these conjugate structures indicates a NNW–SSE-trending bulk shortening. In the Chinese Altay mountains, the existence of δ-type microstructures in an important sinistral mylonitic zone infers high rates of deformation. This shear zone is bordered by a late dextral ductile fault synchronous with a granite emplacement. Field evidence and datings from the literature provide chronological constraints. In the late Carboniferous, the sinistral mylonitic deformation took place in the Erqishi–Irtysh shear zone in the northeastern part of Xinjiang and in Kazakhstan. During the Early Permian, a regional dextral event occurred in the Tianshan range and under the whole of northern Xinjiang. 相似文献
6.
7.
Jos Cembrano Alain Lavenu Peter Reynolds Gloria Arancibia Gloria Lpez Alejandro Sanhueza 《Tectonophysics》2002,354(3-4)
The southern Andes plate boundary zone records a protracted history of bulk transpressional deformation during the Cenozoic, which has been causally related to either oblique subduction or ridge collision. However, few structural and chronological studies of regional deformation are available to support one hypothesis or the other. We address along- and across-strike variations in the nature and timing of plate boundary deformation to better understand the Cenozoic tectonics of the southern Andes.Two east–west structural transects were mapped at Puyuhuapi and Aysén, immediately north of the Nazca–South America–Antarctica triple junction. At Puyuhuapi (44°S), north–south striking, high-angle contractional and strike-slip ductile shear zones developed from plutons coexist with moderately dipping dextral-oblique shear zones in the wallrocks. In Aysén (45–46°), top to the southwest, oblique thrusting predominates to the west of the Cenozoic magmatic arc, whereas dextral strike-slip shear zones develop within it.New 40Ar–39Ar data from mylonites and undeformed rocks from the two transects suggest that dextral strike-slip, oblique-slip and contractional deformation occurred at nearly the same time but within different structural domains along and across the orogen. Similar ages were obtained on both high strain pelitic schists with dextral strike-slip kinematics (4.4±0.3 Ma, laser on muscovite–biotite aggregates, Aysén transect, 45°S) and on mylonitic plutonic rocks with contractional deformation (3.8±0.2 to 4.2±0.2 Ma, fine-grained, recrystallized biotite, Puyuhuapi transect). Oblique-slip, dextral reverse kinematics of uncertain age is documented at the Canal Costa shear zone (45°S) and at the Queulat shear zone at 44°S. Published dates for the undeformed protholiths suggest both shear zones are likely Late Miocene or Pliocene, coeval with contractional and strike-slip shear zones farther north. Coeval strike-slip, oblique-slip and contractional deformation on ductile shear zones of the southern Andes suggest different degrees of along- and across-strike deformation partitioning of bulk transpressional deformation.The long-term dextral transpressional regime appears to be driven by oblique subduction. The short-term deformation is in turn controlled by ridge collision from 6 Ma to present day. This is indicated by most deformation ages and by a southward increase in the contractional component of deformation. Oblique-slip to contractional shear zones at both western and eastern margins of the Miocene belt of the Patagonian batholith define a large-scale pop-up structure by which deeper levels of the crust have been differentially exhumed since the Pliocene at a rate in excess of 1.7 mm/year. 相似文献
8.
In the Pyrenees, the development of mylonites zones is one of the most striking structural features. Two sets of mylonites of regional extent have been recognized: large longitudinal E-W to N110°E trending zones (e.g. Mérens fault and North Pyrenean fault) and oblique NW-SE trending zones cross-cutting both the Hercynian and the post-Hercynian terrains. The longitudinal zones limit the major structural zones of the Pyrenees and are associated with NW-SE “en échelons” folds in the Mesozoic terrains and rotations of rootless plutonic or gneissic massifs, acting as competent inclusions in a more ductile matrix, in the Hercynian basement. The oblique mylonite zones limit map-scale fold-bands and appear as the sheared limbs of these folds.The age of the oblique zones and of the major movements along the longitudinal zones is clearly Alpine and the “en échelons” folds seem to have controlled the sedimentation during the Upper Albian and possibly during the Upper Cretaceous. Early movements along the longitudinal zones may have been Hercynian.The analysis of the structures at all scales leads us to interpret these mylonite zones and associated structures as the ultimate result of a transcurrent simple shear acting during the whole Mesozoic period. This strike-slip shearing was probably associated with an extension perpendicular to it from the Permian to the Upper Cretaceous and then to a shortening component also perpendicular to it from the Late Cretaceous to the Eocene.The development of the mylonite zones appears to have predated the major Alpine thrusting but to have been reactivated during this thrusting, acting as initiation sites for the thrusts or as oblique ramps in the case of the oblique mylonite zones. 相似文献
9.
桐柏-大别南缘变质流体变质-变形特征及构造意义 总被引：1，自引：0，他引：1
前人研究认为桐柏山主要是由桐柏核部杂岩单元组成,它是一个早白垩世花岗质片麻岩杂岩体,其中包含一定的三叠纪中高级变质岩石,后期一起经历相同的构造变形过程,在南北两侧形成剪切旋向完全相反的两条大型韧性剪切带,殷店-马垅剪切带就是南边的华南板块由SSE→NNW挤压作用下,在斜切大别造山带的方向上产生的右行平移断裂带。在野外进行地质考察的过程中,发现在该地区变质流体的分布具有一定的规律。因此,本文通过对殷店-马垅剪切带地质特征、走滑性质、糜棱岩及糜棱岩化岩石的变质变形,剪切带内长英质脉体物质组成、变形特征及物质来源等方面研究,探讨剪切带中变质流体的分布规律以及变质变形与变质流体之间的关系。 相似文献
10.
Flavien Choulet Michel Faure Olivier Fabbri Patrick Monié 《International Journal of Earth Sciences》2012,101(2):393-413
The ENE–WSW Autun Shear Zone in the northeastern part of the French Massif Central has been interpreted previously as a dextral
wrench fault. New field observations and microstructural analyses document a NE–SW stretching lineation that indicates normal
dextral motions along this shear zone. Further east, similar structures are observed along the La Serre Shear Zone. In both
areas, a strain gradient from leucogranites with a weak preferred orientation to highly sheared mylonites supports a continuous
Autun–La Serre fault system. Microstructural observations, and shape and lattice-preferred orientation document high-temperature
deformation and magmatic fabrics in the Autun and La Serre granites, whereas low- to intermediate-temperature fabrics characterize
the mylonitic granite. Electron microprobe monazite geochronology of the Autun and La Serre granites yields a ca. 320 Ma age
for pluton emplacement, while mica 40Ar-39Ar datings of the Autun granite yield plateau ages from 305 to 300 Ma. The ca. 300 Ma 40Ar-39Ar ages, obtained on micas from Autun and La Serre mylonites, indicate the time of the mylonitization. The ca. 15-Ma time
gap between pluton emplacement and deformation along the Autun–La Serre fault system argue against a synkinematic pluton emplacement
during late orogenic to postorogenic extension of the Variscan Belt. A ductile to brittle continuum of deformation is observed
along the shear zone, with Lower Permian brittle faults controlling the development of sedimentary basins. These results suggest
a two-stage Late Carboniferous extension in the northeastern French Massif Central, with regional crustal melting and emplacement
of the Autun and La Serre leucogranites around 320 Ma, followed, at 305–295 Ma, by ductile shearing, normal brittle faulting,
and subsequent exhumation along the Autun–La Serre transtensional fault system. 相似文献
11.
新疆北部卡拉麦里晚古生代走滑构造及其叠加变形序次 总被引：1，自引：1，他引：0
大型走滑断裂构造是大陆地壳内部基本的构造变形样式,通常是大陆地壳形成的标志.卡拉麦里构造带是新疆东准地区构造演化研究的重要构造单元.前人的研究认为卡拉麦里构造带是板块碰撞形成的缝合带.本文结合野外考察、构造分析和年代学工作认为,该构造带主要反映了走滑构造带的特点.在遥感影像上,卡拉麦里构造带呈断续的线状延伸特征.地震剖面上,卡拉麦里断裂带主断面产状近于直立向下延伸至基底,与一般张性断层、压性逆冲断层所显示的上陡下缓的铲状特征截然不同.野外考察显示,该构造带发育密集而陡立劈理,主断面附近劈理面倾角近于直立,在相对较浅层次的地层上,劈理面成花状散开,体现花状构造的特点.卡拉麦里构造带内的石炭系、泥盆系地层以及蛇绿岩系受到强烈改造,超糜棱岩化、糜棱岩化、千枚岩化现象普遍.糜棱岩中,硅质岩透镜体拖尾指示右旋走滑特征,与同构造岩脉次级张裂面指示的结果相一致.结合前人研究资料以及地层变形证据,可以推断构造带活动时限为270～260Ma.因此,卡拉麦里构造带是一条在晚古生代-早中生代活动的右旋剪切走滑构造带,准东地区与卡拉麦里构造带相关的缝合带确认,必须以卡拉麦里走滑构造带性质的准确厘定为基础.卡拉麦里构造二叠纪时期的走滑活动性质的确定,指示新疆北部二叠纪大陆地壳已经形成,而且,新疆北部后期叠加构造变形序次研究也显示具有大区域上的共性,指示新疆北部二叠纪以来进入基本统一大陆内部构造演化阶段. 相似文献
12.
北秦岭二郎坪岩群南、北两侧分别被朱夏韧性剪切带和瓦乔韧性剪切带与秦岭岩群和宽坪岩群分开,这两条韧性剪切带对二郎坪弧后盆地的演化起着十分重要的作用。本文对这两条剪切带进行了详细的几何学、运动学和40Ar-39Ar年代学研究。几何学和运动学分析结果指示瓦乔剪切带具有由北向南逆冲剪切的运动学特征,而朱夏剪切带早期具有由南向北逆冲的运动学特征,而后期又发生右行走滑活动。对瓦乔剪切带和朱夏剪切带内的糜棱岩中白云母进行了40Ar-39Ar法定年,结果指示瓦乔剪切带逆冲活动发生在387±1.7 Ma,朱夏韧性剪切早期逆冲发生在晚古生代,后期右行走滑的年龄为146±2.8 Ma。综合两条剪切带的构造变形特征和年代学数据,结合前人的地质资料,本文认为二郎坪弧后盆地曾沿着瓦乔剪切带和朱夏剪切带发生双向式俯冲。 相似文献
13.
In the Bear Creek area of the Sierra Nevada batholith, California, the high temperature postmagmatic deformation structures of the Lake Edison granodiorite include steeply-dipping orthogneiss foliations, joints, and ductile shear zones that nucleated on joints and leucocratic dykes. Exploitation of segmented joints resulted in sharply bounded, thin shear zones and in large slip gradients near the shear zone tips causing the deformation of the host rock at contractional domains. The orthogneiss foliation intensifies towards the contact with the younger Mono Creek granite and locally defines the dextral Rosy Finch Shear Zone (RFSZ), a major kilometre-wide zone crosscutting the pluton contacts. Joints predominantly strike at N70–90°E over most of the Lake Edison pluton and are exploited as sinistral shear zones, both within and outside the RFSZ. In a narrow (∼250 m thick) zone at the contact with the younger Mono Creek granite, within the RFSZ, the Lake Edison granodiorite includes different sets of dextral and sinistral shear zones/joints (the latter corresponding to the set that dominates over the rest of the Lake Edison pluton). These shear zones/joints potentially fit with a composite Y–R–R′ shear fracture pattern associated with the RFSZ, or with a pattern consisting of Y–R-shear fractures and rotated T′ mode I extensional fractures. The mineral assemblage of shear zones, and the microstructure and texture of quartz mylonites indicate that ductile deformation occurred above 500 °C. Joints and ductile shearing alternated and developed coevally. The existing kinematic models do not fully capture the structural complexity of the area or the spatial distribution of the deformation and magmatic structures. Future models should account more completely for the character of ductile and brittle deformation as these plutons were emplaced and cooled. 相似文献
14.
野马泉和勒巴泉韧性剪切带作为北山造山带微陆块碰撞的产物，在北山造山带早古生代碰撞—造山过程中具有重要的地质意义。前人对其研究主要集中于勒巴泉地区构造变质核杂岩以及其中产出的蛇绿岩带。为了更好确定其构造变形时代，文章通过对野马泉和勒巴泉韧性剪切带野外构造剖面和显微构造特征的研究表明：野马泉和勒巴泉韧性剪切带具有由北西西向南东东逆冲，兼具右行剪切运动特征。通过对韧性剪切带中糜棱岩带中未变形花岗岩脉的锆石U-Pb定年，确定了野马泉和勒巴泉地区韧性剪切变形年龄上限为416 Ma，结合前人所报道的年龄，将韧性剪切变形时代大致限定在423~416 Ma之间，可能与牛圈子洋壳往北北东方向朝野马泉弧俯冲有关。 相似文献
15.
The unlined Bedretto tunnel in the Central Swiss Alps has been used to investigate in detail the fault architecture and late
Alpine brittle faulting processes in the Rotondo granite on macroscopic and microscopic scales. Brittle faults in the late
Variscan Rotondo granite preferentially are situated within the extent of preexisting ductile shear zones. Only in relatively
few cases the damage zone extends into or develops in the previously undeformed granite. Slickensides suggest a predominant
(dextral) strike-slip movement along these steeply dipping and NE–SW-striking faults. Microstructures of these fault rocks
illustrate a multi-stage retrograde deformation history from ductile to brittle conditions up to the cessation of fault activity.
In addition these fabrics allow identifying cataclastic flow, fluid-assisted brecciation and chemical corrosive wear as important
deformation mechanisms during this retrogressive deformation path. Based on the analysis of zeolite microfabrics (laumontite
and stilbite; hydrated Ca–Al- and Na–Ca–Al–silicate, respectively) in fault breccias, cataclasites and open fractures we conclude,
that the main phase of active brittle faulting started below 280°C and ceased ca. 14 Ma ago at temperatures slightly above
200°C. This corresponds to a depth of approx. 7 km. 相似文献
16.
越城岭花岗岩体西侧滑脱型韧性剪切带的发现及其形成的构造体制 总被引：6，自引：2，他引：6
越城岭花岗岩体西侧片麻状花岗岩带主体是一条由韧性剪切作用形成的复合糜棱岩带,包括早期高绿片岩相条件下形成的糜棱片麻岩和晚期低绿片岩相条件下形成的糜棱岩。高绿片岩相韧性剪切带和低绿片岩相韧性剪切带具有基本一致的运动学性质,为滑脱型韧性剪切带,总体为在向NWW缓倾的糜棱面理上向SW方向滑动,并在平面上表现为左旋效应。根据构造对比研究,认为越城岭西侧滑脱型韧性剪切带形成于后造山阶段的伸展构造体制。 相似文献
17.
郯庐断裂带内一系列走滑糜棱岩类的^40Ar/^39Ar测年表明，郯庐断裂早白垩世发生了左旋走滑运动。这一大规模的走滑运动，造成了两类走滑构造，一类为变质岩中低绿片岩相左旋韧性剪切带，另一类为中生代火成岩、沉积岩中的脆性、脆-韧性左行平移断层。这反映断裂带的走滑运动从早白垩世初期持续到早白垩世后期。断裂带的走滑运动诱发大规模的、以富钾、中酸性为主的岩浆活动。地球化学分析显示，这些岩浆岩既有壳源的信息，也有幔源的贡献，反映是断裂减压、壳-幔相互作用下形成的岩浆活动，也暗示断裂带在走滑期切入壳-幔边界。该断裂带走滑运动中，除了在莱阳盆地形成了拉分盆地外，还在合肥盆地东部造成了走滑挠曲盆地，控制下白垩统朱巷组的沉积，郯庐断裂带早白垩世走滑运动中的构造、岩浆、沉积事件，是西太平洋伊泽纳崎板块高速斜向俯冲的结果，属于滨太平洋构造。 相似文献
18.
Structural controls of lode-gold mineralization by mafic dykes in late-Paleozoic granitoids of the Kochkar district, southern Urals, Russia 总被引：2，自引：0，他引：2
A. F. M. Kisters F. M. Meyer S. E. Znamensky I. B. Seravkin R. G. W. Ertl A. M. Kosarev 《Mineralium Deposita》2000,35(2-3):157-168
The Kochkar gold district in the East Uralian Zone of the southern Urals is located in late-Paleozoic granite gneisses of
the Plast massif. Gold mineralization is associated with tabular quartz lodes that are preferentially developed along the
margins of easterly trending mafic dykes. Fabric development indicates that dykes had a profound influence on the development
of shear zones in granitoids. ENE- and SE-trending dykes have been reactivated as dextral and sinistral oblique strike-slip
shear zones, respectively, forming a set of approximately conjugate shear zones related to the Permian, regional-scale E-W
directed shortening. Dyke-shear zone relationships in the Plast massif are the result of strain refraction due to the presence
of biotite-rich, incompetent dykes in more competent granite-gneisses. Deformation and the formation of associated gold-quartz
lodes occurred close to peak-metamorphic, upper-greenschist to lower-amphibolite facies conditions. Strain refraction has
resulted in partitioning of the bulk strain into a component of non-coaxial mainly ductile shear in mafic dykes, and a component
of layer-normal pure shear in surrounding granitoids where deformation was brittle-ductile. Brittle fracturing in granitoids
has resulted in the formation of fracture permeabilities adjacent to sheared dykes, that together with the layer-normal dilational
component, promoted the access of mineralizing fluids. Both ore-controlling dykes and gold-quartz lodes were subsequently
overprinted by lower greenschist-facies, mainly brittle fault zones and associated hydrothermal alteration that post-date
gold mineralization.
Received: 15 October 1998 / Accepted: 18 August 1999 相似文献
19.
野马泉和勒巴泉韧性剪切带作为北山造山带微陆块碰撞的产物,在北山造山带早古生代碰撞—造山过程中具有重要的地质意义。前人对其研究主要集中于勒巴泉地区构造变质核杂岩以及其中产出的蛇绿岩带。为了更好确定其构造变形时代,文章通过对野马泉和勒巴泉韧性剪切带野外构造剖面和显微构造特征的研究表明：野马泉和勒巴泉韧性剪切带具有由北西西向南东东逆冲,兼具右行剪切运动特征。通过对韧性剪切带中糜棱岩带中未变形花岗岩脉的锆石U-Pb定年,确定了野马泉和勒巴泉地区韧性剪切变形年龄上限为416 Ma,结合前人所报道的年龄,将韧性剪切变形时代大致限定在423~416 Ma之间,可能与牛圈子洋壳往北北东方向朝野马泉弧俯冲有关。 相似文献
20.
Geometrical analysis of mesoscopic shear zones in the crystalline rocks of MCT zone of Garhwal Higher Himalaya 总被引：1，自引：0，他引：1
The crystalline rocks of the MCT Zone of Garhwal Higher Himalaya exhibit well-preserved mesoscopic shear zones. Majority of these shear zones are of ductile and brittle ductile type with both sinistral and dextral sense of movement. Detailed analysis of mesoscopic shear zones reveals that sinistral shear zones exhibit a strike variation from NNE to ENE and dextral shear zones exhibit variation from NNW to WNW directions thus forming a conjugate pair. The bisectors of statistically preferred orientations of the two sets of the shears indicate that they generated due to NNE–SSW horizontal compression. These dextral and sinistral shear zones exhibit strike–slip geometry developed during progressive ductile shearing. 相似文献