首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Felsic volcanic units of the Early Devonian Bindook Volcanic Complex host the Yerranderie epithermal silver–gold–lead district 94 km west–southwest of Sydney. Mineralization in the district forms part of a fault‐controlled, intermediate sulfidation, epithermal silver–gold–base metal vein system that has significant mineral and alteration zonation. Stage 1 of the mineral paragenesis in the veins developed quartz and carbonate with early pyrite, whereas stage 2 is a crustiform banded quartz–pyrite–arsenopyrite assemblage. Stage 3, the main stage of sulfide deposition, comprises early sphalerite, followed by a tetrahedrite–tennantite–gold assemblage, then a galena–chalcopyrite–native silver–pyrite assemblage, and finally a pyrargyrite–polybasite–pearceite assemblage. Stage 4 involves the deposition of quartz veins with minor (late) pyrite and stage 5 is characterized by siderite that infilled remaining voids. Mineral zonation occurs along the Yerranderie Fault, with bornite being restricted to the Colon Peaks–Silver Peak mine area, whereas arsenopyrite, which is present in both the Colon Peaks–Silver Peak and Wollondilly mine areas, is absent in other lodes along the Yerranderie Fault. The Yerranderie Fault, which hosts the major lodes, is surrounded by a zoned alteration system. With increasing proximity to the fault the intensity of alteration increases and the alteration assemblage changes from an outer quartz–muscovite–illite–(ankerite) assemblage to a quartz–illite–(pyrite–carbonate) assemblage within meters of the fault. 40Ar/39Ar dating of muscovite from the alteration zone gave a 372.1 ± 1.9 Ma (Late Devonian) age, which is interpreted to be the timing of the quartz–sulfide vein formation. Sulfur isotope values for sulfides range from 0.1 to 6.2‰ with one outlier of ?5.6 δ34S‰. The results indicate that the initial ore‐forming fluids were reduced, and that sulfur was probably sourced from a magmatic reservoir, either as a direct magmatic contribution or indirectly through dissolution and recycling of sulfur from the host volcanic sequence. The sulfur isotope data suggest the system is isotopically zoned.  相似文献   

2.
Mineral assemblages, chemical compositions of ore minerals, wall rock alteration and fluid inclusions of the Gatsuurt gold deposit in the North Khentei gold belt of Mongolia were investigated to characterize the gold mineralization, and to clarify the genetic processes of the ore minerals. The gold mineralization of the deposit occurs in separate Central and Main zones, and is characterized by three ore types: (i) low‐grade disseminated and stockwork ores; (ii) moderate‐grade quartz vein ores; and (iii) high‐grade silicified ores, with average Au contents of approximately 1, 3 and 5 g t?1 Au, respectively. The Au‐rich quartz vein and silicified ore mineralization is surrounded by, or is included within, the disseminated and stockwork Au‐mineralization region. The main ore minerals are pyrite (pyrite‐I and pyrite‐II) and arsenopyrite (arsenopyrite‐I and arsenopyrite‐II). Moderate amounts of galena, tetrahedrite‐tennantite, sphalerite and chalcopyrite, and minor jamesonite, bournonite, boulangerite, geocronite, scheelite, geerite, native gold and zircon are associated. Abundances and grain sizes of the ore minerals are variable in ores with different host rocks. Small grains of native gold occur as fillings or at grain boundaries of pyrite, arsenopyrite, sphalerite, galena and tetrahedrite in the disseminated and stockwork ores and silicified ores, whereas visible native gold of variable size occurs in the quartz vein ores. The ore mineralization is associated with sericitic and siliceous alteration. The disseminated and stockwork mineralization is composed of four distinct stages characterized by crystallization of (i) pyrite‐I + arsenopyrite‐I, (ii) pyrite‐II + arsenopyrite‐II, (iii) galena + tetrahedrite + sphalerite + chalcopyrite + jamesonite + bournonite + scheelite, and iv) boulangerite + native gold, respectively. In the quartz vein ores, four crystallization stages are also recognized: (i) pyrite‐I, (ii) pyrite‐II + arsenopyrite + galena + Ag‐rich tetrahedrite‐tennantite + sphalerite + chalcopyrite + bournonite, (iii) geocronite + geerite + native gold, and (iv) native gold. Two mineralization stages in the silicified ores are characterized by (i) pyrite + arsenopyrite + tetrahedrite + chalcopyrite, and (ii) galena + sphalerite + native gold. Quartz in the disseminated and stockwork ores of the Main zone contains CO2‐rich, halite‐bearing aqueous fluid inclusions with homogenization temperatures ranging from 194 to 327°C, whereas quartz in the disseminated and stockwork ores of the Central zone contains CO2‐rich and aqueous fluid inclusions with homogenization temperatures ranging from 254 to 355°C. The textures of the ores, the mineral assemblages present, the mineralization sequences and the fluid inclusion data are consistent with orogenic classification for the Gatsuurt deposit.  相似文献   

3.
Abstract: Mineral paragenesis of the alteration, ore and gangue minerals of the Lepanto epithermal copper‐gold deposit and the Victoria gold deposit, Mankayan Mineral District, Northern Luzon, Philippines, is discussed. The principal ore minerals of the Lepanto copper‐gold deposit are enargite and luzonite, with significant presence of tennantite‐tetrahedrite, chalcopyrite, sphalerite, galena, native gold/electrum and gold‐silver tellurides. Pervasive alteration zonations are commonly observed from silicification outward to advanced argillic then to propylitic zone. The ore mineralogy of the Lepanto copper‐gold deposit suggests high fS2 in the early stages of mineralization corresponding to the deposition of the enargite‐luzonite‐pyrite assemblage. Subsequent decrease in the fS2 formed the chalcopyrite‐tennantite‐pyrite assemblage. An increase in the fS2 of the fluids with the formation of the covellite‐digenite‐telluride assemblage caused the deposition of native gold/electrum and gold‐silver tellurides. The principal ore minerals of the Victoria gold deposit are sphalerite, galena, chalcopyrite, tetrahedrite and native gold/electrum. The alteration halos are relatively narrow and in an outward sequence from the ore, silica alteration grades to illitic‐argillic alteration, which in turn grades to propylitic alteration. The Victoria gold mineralization has undergone early stages of silica supersaturation leading to quartz deposition. Vigorous boiling increased the pH of the fluids that led to the deposition of sulfides and carbonates. The consequent decrease in H2S precipitated the gold. Gypsum and anhydrite mainly occur as overprints that cut the carbonate‐silica stages. The crosscutting and overprinting relationships of the Victoria quartz‐gold‐base metal veins on the Lepanto copper‐gold veins manifest the late introduction of near neutral pH hydrothermal fluids.  相似文献   

4.
Interpretation of various exploration data, in particular geochemical prospecting, offers a powerful and rapid assessment of grass-root projects in a green-field terrain. Here, we present an example of the Collins epithermal prospect in Aceh Province, Indonesia. In this area, the Au+ base-metal-bearing sheeted quartz veins (individually mostly 2–4 cm wide), which are controlled by a 250 m wide by 800 m long NNE-trending structural corridor within Paleogene sandstone and volcanic rocks, are the product of two main stages of deposition. Stage I formed veins with a sliver of cryptocrystalline quartz wall zone followed by an inner zone of comb quartz with interstitial rhombic adularia that terminates in open space. Stage I or main-stage sulfide mineralization consisting of early galena + sphalerite and later chalcopyrite occurs with the quartz + adularia. Small amounts of galena also occur in the wall zone. Stage II mineralization brecciated Stage I veins and overprinted them with silicification characterized by vuggy texture. Mineralization associated with this episode consists of earlier chalcopyrite + sphalerite + tennantite–tetrahedrite and later, vug-filling Au–Ag alloy (Ag0.37–0.41Au0.62–0.59). The above mineralized veins are successively flanked by silicic selvages, an illite + chlorite + pyrite ± kaolinite zone and a chlorite + epidote + carbonate + pyrite zone. Local supergene alteration induced replacement of galena by plumbogummite and anglesite and chalcopyrite by covellite. Data from fluid inclusion microthermometry in quartz indicated that the inner zone of Stage I veins formed from fluids with a 2.3 wt% salinity (0.5–3.3 wt% NaCl equivalent), at 174°C (155–211°C). Combining these physico-chemical parameters with the mineral assemblage, the mineralization occurred under a reduced environment. Rock and soil assays indicate that elevated Au concentrations (up to 16.5 ppm over 1 m) occur along northeast-trending zones and show a strong correlation with Pb, while Cu (up to 2.58% over 1 m), Zn, As, Sb, and Mo anomalies lie mostly at the periphery. The high-grade mineralized veins correlate with moderate to high resistivity and chargeability zones, and the pseudosections of such geophysical signals are interpreted as reflecting coalesced or enlarged veins at depth, or inclined veins in other localities. The intermediate sulfidation affinity for Collins points to potential mineralization at depth as well as preservation of Au-rich and sulfide-poor zones in the less eroded areas.  相似文献   

5.
四川石棉西部碳酸盐岩中的金矿床产于泥盆系中统,受层间蚀变破碎带控制。围岩蚀变类型有硅化、碳酸盐化和绢云母化。矿石矿物组分为黄铁矿、黝铜矿、黄铜矿、方铅矿、闪锌矿和Ａｕ－Ａｇ系列矿物,具Ａｕ－Ｃｕ－Ａｇ－Ｐｂ－ＳＡｓ－Ｓｂ－Ｂｉ的元素组合,并一定的垂直分带规律。其成因类型为地下热卤水型。矿床受地层、岩性和断裂的控制明显。并阐明了金矿床的成矿过程和勘查准则。  相似文献   

6.
巴达铜金矿位于藏东富碱斑岩带南段,是藏东地区近年来新发现的大型铜金矿。虽然对巴达铜金矿开展了大量勘查工作,但对该矿床的成因尚未取得共识。本文基于详细的野外调研、岩心与坑道编录及系统的镜下鉴定,对巴达铜金矿床地质特征进行研究。巴达矿床主要产于石英二长斑岩中,局部产于斑岩和砂岩地层的接触带内。矿床发育的围岩蚀变主要为青磐岩化、钾化、绢英岩化,高岭土化、蛋白石化、蒙脱石化次之,蚀变分带从内向外依次为钾硅酸盐化带、绢英岩化带、青磐岩化带、高岭土化带,铜金矿体主要赋存于钾硅酸盐化和绢英岩化带内,铜矿化主要以黄铜矿形式产出,金矿化主要以银金矿形式产于白云石±石英+细粒黄铁矿±黄铜矿脉中,铜矿化与金矿化呈正相关,矿体的产出受北西向逆冲断层的控制。与典型斑岩和浅成低温热液矿床不同,巴达铜金矿化主要产于白云石±石英+黄铁矿脉中;矿床内既发育碳酸盐、伊利石、绢云母和黄铁矿、黄铜矿、方铅矿、黝铜矿、低FeS闪锌矿等一套中硫型浅成低温热液矿床的蚀变矿物组合,又发育符合碱性斑岩系统的特征矿物赤铁矿。基于以上特征判断,巴达铜金矿矿床成因类型应为与富碱斑岩有关的浅成低温热液矿床,巴达铜金矿矿床成因的厘定,为下一步找矿提供了理论指导。  相似文献   

7.
The Cheshmeh Hafez epithermal base metal deposit is located in Troud-Chah Shirin mountain range in the Alborz magmatic belt of northern Iran. In this area, the Eocene volcanism and associated mineralization are controlled by NW-SE trending Anjilo and Troud major faults. Geological units are composed of porphyritic andesite, andesitic basalt, dacite, rhyodacite, trachyandesite and basalt, which are typically high-K igneous rocks transitional to shoshonites. Alteration in Cheshmeh Hafez area comprise of propylilitization, sericitization, argillization and silicification. Mineralization consists of three stages. Stage 1, quartz, carbonate with early pyrite I and chalcopyrite assemblages. Stage 2, the main stage of sulfide deposition, comprises early euhedral galena I followed by galena II and sphalerite, then galena III, chalcopyrite, tetrahedrite, pyrite II, bornite and digenite. Stage 3 involves the deposition of quartz and calcite barren veins with minor pyrite. The average assays from 12 channel samples of Cheshmeh Hafez veins are 0.15 g/t Au, 3.23 g/t Ag, 4.47 wt % Pb, 2.64 wt % Cu, and 1.73 wt % Zn. Fluid inclusion homogenization temperatures (Th) in quartz fall within the range of 140°-280°C with salinities ranging from 4.7 to 18 wt. % NaCl equivalent. Comparison of Th versus ice melting (Tmice) values indicates fluid dilution.  相似文献   

8.
Mineral assemblages and chemical compositions of ore minerals from the Boroo gold deposit in the North Khentei gold belt of Mongolia were studied to characterize the gold mineralization, and to clarify crystallization processes of the ore minerals. The gold deposit consists of low‐grade disseminated and stockwork ores in granite, metasedimentary rocks and diorite dikes. Moderate to high‐grade auriferous quartz vein ores are present in the above lithological units. The ore grades of the former range from about 1 to 3 g/t, and those of the latter from 5 to 10 g/t, or more than 10 g/t Au. The main sulfide minerals in the ores are pyrite and arsenopyrite, both of which are divisible into two different stages (pyrite‐I and pyrite‐II; arsenopyrite‐I and arsenopyrite‐II). Sphalerite, galena, chalcopyrite, and tetrahedrite are minor associated minerals, with trace amounts of bournonite, boulangerite, geerite, alloclasite, native gold, and electrum. The ore minerals in the both types of ores are variable in distribution, abundance and grain size. Four modes of gold occurrence are recognized: (i) “invisible” gold in pyrite and arsenopyrite in the disseminated and stockwork ores, and in auriferous quartz vein ores; (ii) microscopic native gold, 3 to 100 µm in diameter, that occurs as fine grains or as an interstitial phase in sulfides in the disseminated and stockwork ores, and in auriferous quartz vein ores; (iii) visible native gold, up to 1 cm in diameter, in the auriferous quartz vein ores; and (iv) electrum in the auriferous quartz vein ores. The gold mineralization of the disseminated and stockwork ores consists of four stages characterized by the mineral assemblages of: (i) pyrite‐I + arsenopyrite‐I; (ii) pyrite‐II + arsenopyrite‐II; (iii) sphalerite + galena + chalcopyrite + tetrahedrite + bournonite + boulangerite + alloclasite + native gold; and (iv) native gold. In the auriferous quartz vein ores, five mineralization stages are defined by the following mineral assemblages: (i) pyrite‐I; (ii) pyrite‐II + arsenopyrite; (iii) sphalerite + galena + chalcopyrite; (iv) Ag‐rich tetrahedrite‐tennantite + bournonite + geerite + native gold; and (v) electrum. The As–Au relations in pyrite‐II and arsenopyrite suggest that gold detected as invisible gold is mostly attributed to Au+1 in those minerals. By applying the arsenopyrite geothermometer to arsenopyrite‐II in the disseminated and stockwork ores, crystallization temperature and logfs2 are estimated to be 365 to 300 °C and –7.5 to –10.1, respectively.  相似文献   

9.
Mineralogic studies of major ore minerals and fluid inclusion analysis in gangue quartz were carried out for the for the two largest veins, the Aginskoe and Surprise, in the Late Miocene Aginskoe Au–Ag–Te deposit in central Kamchatka, Russia. The veins consist of quartz–adularia–calcite gangue, which are hosted by Late Miocene andesitic and basaltic rocks of the Alnei Formation. The major ore minerals in these veins are native gold, altaite, petzite, hessite, calaverite, sphalerite, and chalcopyrite. Minor and trace minerals are pyrite, galena, and acanthine. Primary gold occurs as free grains, inclusions in sulfides, and constituent in tellurides. Secondary gold is present in form of native mustard gold that usually occur in Fe‐hydroxides and accumulates on the decomposed primary Au‐bearing tellurides such as calaverite, krennerite, and sylvanite. K–Ar dating on vein adularia yielded age of mineralization 7.1–6.9 Ma. Mineralization of the deposit is divided into barren massive quartz (stage I), Au–Ag–Te mineralization occurring in quartz‐adularia‐clays banded ore (Stage II), intensive brecciation (Stage III), post‐ore coarse amethyst (Stage IV), carbonate (Stage V), and supergene stages (Stage VI). In the supergene stage various secondary minerals, including rare bilibinskite, bogdanovite, bessmertnovite metallic alloys, secondary gold, and various oxides, formed under intensely oxidized conditions. Despite heavy oxidation of the ores in the deposit, Te and S fugacities are estimated as Stage II tellurides precipitated at the log f Te2 values ?9 and at log fS2 ?13 based on the chemical compositions of hypogene tellurides and sphalerite. Homogenization temperature of fluid inclusions in quartz broadly ranges from 200 to 300°C. Ore texture, fluid inclusions, gangue, and vein mineral assemblages indicate that the Aginskoe deposit is a low‐sulfidation (quartz–adularia–sericite) vein system.  相似文献   

10.
The occurrence and the chemical compositions of ore minerals (especially the silver‐bearing minerals) and fluid inclusions of the El Zancudo mine in Colombia were investigated in order to analyze the genetic processes of the ore minerals and to examine the genesis of the deposit. The El Zancudo mine is a silver–gold deposit located in the western flank of the Central Cordillera in Antioquia Department. It consists mainly of banded ore veins hosted in greenschist and lesser disseminated ore in porphyritic rocks. The ore deposit is associated with extensive hydrothermally altered zones. The ores from the banded veins contain sphalerite, pyrite, arsenopyrite, galena, Ag‐bearing sulfosalts, Pb‐Sb sulfosalts, and minor chalcopyrite, electrum, and native silver. Electrum is included within sphalerite, pyrite, and arsenopyrite, and is also partially surrounded by pyrite, arsenopyrite, sphalerite, and tetrahedrite. Native silver is present in minor amounts as small grains in contact with Ag‐rich sulfosalts. Silver‐bearing sulfosalts are argentian tetrahedrite–freibergite solid solution, andorite, miargyrite, diaphorite, and owyheeite. Pb‐Sb sulfosalts are bournonite, jamesonite, and boulangerite. Two main crystallization stages are recognized, based on textural relations and mineral assemblages. The first‐stage assemblage includes sphalerite, pyrite, arsenopyrite, galena and electrum. The second stage is divided into two sub‐stages. The first sub‐stage commenced with the deposition and growth of sphalerite, pyrite, and arsenopyrite. These minerals are characterized by compositional growth banding, and seem to have crystallized continuously until the end of the second sub‐stage. Tetrahedrite, Pb‐Cu sulfosalts, Ag‐Sb sulfosalt, and Pb‐Ag‐Sb sulfosalts crystallized from the final part of the first sub‐stage and during the whole second sub‐stage. However, one Pb‐Ag‐Sb sulfosalt, diaphorite, was formed by a retrograde reaction between galena and miargyrite. The minimum and maximum genetic temperatures estimated from the FeS content of sphalerite coexisting with pyrite and the silver content of electrum are 300°C and 420°C, respectively. These estimated genetic temperatures are similar to, but slightly higher than the homogenization temperatures (235–350°C) of primary fluid inclusions in quartz. The presence of muscovite in the altered host rocks and gangue suggest that the pH of the hydrothermal solutions was close to neutral. Most of the sulfosalts in this deposit have previously been attributed as the products of epithermal mineralization. However, El Zancudo can be classified as a xenothermal deposit, in view of the low pressure and high temperature genetic conditions identified in the present study, based on the mineralogy of sulfosalts and the homogenization temperatures of the fluid inclusions.  相似文献   

11.
The Penjom gold deposit lies on the eastern side of the Raub‐Bentong Suture line within the Central Belt of Permo‐Triassic rocks, near Kuala Lipis, Pahang, Malaysia. The geology of the deposit is dominated by a sequence of fine‐ to coarse‐grained rhyolitic to rhyodacitic tuff, tuff‐breccia and a minor rhyolitic–rhyodacitic volcanic series, associated with argillaceous marine sedimentary rocks consisting of shale with subordinate shalely limestone of Padang Tungku Formation and Pahang Volcanic Series. Fine‐ to coarse‐grained tonalite and quartz porphyry intruded this unit. The main structural features of the area are north–south‐trending left‐lateral strike‐slip faults and their subsidiaries, which generally strike north–south and dip moderately to the east (350°–360°/40°–60°). Mineralization at the Penjom gold deposit is structurally controlled and also erratic laterally and vertically. The gold mineralization can be categorized as (i) gold associated with carbonate‐rich zones hosted within dilated quartz veins carrying significant amount of sulfides; (ii) gold disseminated within stockwork of quartz–carbonate veins affiliated with tonalite; and (iii) gold often associated with arsenopyrite and pyrite in quartz–carbonate veins and stringers hosted within shear zones of brittle–ductile nature in all rock types and in brittle fractured rhyodacitic volcanic rocks. Sphalerite, chalcopyrite, tetrahedrite and pyrrhotite are the minerals accompanying the early stage of gold mineralization. These minerals also suffered from local brittle deformation. However, most of the gold mineralization took place after the deposition of these sulfides. Galena appears somewhat towards the end of gold mineralization, whereas tellurium and bismuth accompanied gold contemporaneously. The gold mineralization occurred most probably due to the metamorphogenic deformational origin concentrated mostly in the shear zone. The mineralization is strongly controlled by the wall rock (e.g. graphitic shale), the sulfide minerals and fluid–rock interaction.  相似文献   

12.
Orogenic Gold Mineralization in the Qolqoleh Deposit, Northwestern Iran   总被引：1，自引：1，他引：1  
The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits.  相似文献   

13.
四川石棉金矿床中的黝铜矿族矿物   总被引：3，自引：0，他引：3  
王小春  张哲儒 《矿物学报》1999,19(4):470-474
四川石棉西部碳酸盐岩系中的金矿床产于泥盆系中统,受层间蚀变破碎带控制。其中分布有为数较多的黟同矿族矿物,与黄铁矿、黄铜矿、方铅矿、闪锌矿和Ａｕ－Ａｇ系列矿物共同组成矿石的矿物组合和Ａｕ－Ｃｕ－Ａｇ－Ｐｂ－Ａｓ－Ｓｂ－Ｂｉ的元素组合。电子探针分析表明黝铜矿族矿物有同铜矿、黝铜矿、砷黝铜矿和锌砷黝铜帮等,其中,Ｆｅ－Ｚｎ、ＡｓＳｂ之间分别呈完全类质同象。在垂向上,黝铜矿的成分自上而下由富锌锑向富铁砷演  相似文献   

14.
《Applied Geochemistry》1995,10(5):517-529
A study to test the use of hydrogeochemical methods for gold prospecting was carried out in the Osilo area, northern Sardinia. The study area, covering about 30 km2 is characterised by Tertiary andesitic rocks. Gold concentrations up to several ppm, associated with abundant pyrite, arsenopyrite, stibnite, tetrahedrite and electrum, and subordinate galena, sphalerite and chalcopyrite, are present in quartz veins associated with a polyphase, incipient and pervasive alteration of the andesitic rocks.Forty-eight water samples (17 streams, 29 springs and 2 boreholes) were analysed for Au and a wide range of major and trace elements, both in solution (< 0.4 μm) and in suspension. Background values for dissolved Au were below the detection limit of the methods used (between 0.3 and 0.5 ng L−1 Au). Gold concentrations in solution up to 3 ng L−1 were found in waters draining the mineralised vein system. The observed dispersion of Au in surface waters was restricted to about 500 m from the auriferous veins. Dissolved Au anomalies do not vary significantly in water samples, taken monthly over a one year period, suggesting that the dispersion of Au is unaffected by seasonal conditions in the Osilo area. For samples where Au was detected both in solution and in suspension, the Au content of the suspended matter was usually lower than that in solution.The best indicators of Au mineralisation, apart from Au itself, both in solution and in suspension, were As and Sb which showed a dispersion clearly related to the known auriferous veins.  相似文献   

15.
Abstract: The Kanggur gold deposit lies in East Tianshan mountains, eastern section of Central Asia orogenic belt. The gold mineralization occurs on the northern margin of the Aqishan‐Yamansu Paleozoic island arc in the Tarim Plate. It was hosted mainly in Middle‐Lower Carboniferous calc‐alkaline volcanic rocks, and controlled by the distributions of syn‐tectonic intrusions and ductile shear zones. In order to determine ore‐forming age of the Kanggur deposit, samples were collected from ores, wall rocks, altered rocks and intrusions. The dating methods include Rb‐Sr isochron and Sm‐Nd isochron, and secondly 40Ar/39Ar age spectrum, U‐Pb and Pb‐Pb methods. Based on the mineral assemblage and crosscutting relationship of ore veins, five mineralization stages are identified. This result is confirmed by isotope geochronologic data. The first stage featuring formation of pyrite‐bearing phyllic rock, is mineralogically represented by pyrite, sericite and quartz with poor native gold. The Rb‐Sr isochron age of this stage is 2905 Ma. The second stage represents the main ore‐forming stage and is characterized by native gold–quartz–pyrite–magnetite–chlorite assemblage. Magnetite and pyrite of this stage are dated by Sm‐Nd isochron at 290.47.2 Ma and fluid inclusion in quartz is dated by Rb‐Sr isochron at 282.35 Ma. The third mineralization stage features native gold–quartz–pyrite vein. In the fourth stage, Au‐bearing polymetallic sulfide‐quartz veins formed. Fluid inclusions in quartz are dated by Rb‐Sr isochron method at 25821 Ma. The fifth stage is composed of sulfide‐free quartz–carbonate veins with Rb‐Sr age of 2547 Ma. The first and second stages are related to ductile‐brittle deformation of shear zones, and are named dynamo‐metamorphic hydrothermal period. The third to fifth stages related to intrusive processes of tonalite and brittle fracturing of the shear zones, are called magmato‐hydrothermal mineralization period. The Rb‐Sr isochron age of 2905 Ma of the altered andesite in the Kanggur mine area may reflect timing of regional ductile shear zone. The Rb‐Sr isochron age of 28216 Ma of the quartz‐syenite porphyry and the zircon U‐Pb age of 2757 Ma of tonalite in the north of Kanggur gold mine area are consistent with the age of gold mineralization (290‐254 Ma). This correspondence indicates that the tonalite and subvolcanic rocks may have been related to gold mineralization. The Rb–Sr, Sm‐Nd and U‐Pb ages and regional geology support the hypothesis that the Kanggur gold deposit was formed during collisional orogenesis process in Late Variscan.  相似文献   

16.
Abstract: The gold deposit at Ashanti occurs in the Proterozoic Birimian formation of Ghana. Two main ore types mined from the deposit are gold-bearing quartz veins, and gold-sulfide disseminations in metasediments and metavolcanics. The main sulfide minerals in the gold-sulfide disseminated ores are arsenopyrite, pyrite and pyrrhotite, and to a very minor extent, sphalerite and tetrahedrite. Carbonate alteration and sericitization are prominent in the metavolcanics and the metasediments, respectively. In the quartz veins, pyrite and arsenopyrite commonly occur in small amounts, but gold mostly occurs in contact with tetrahedrite, chalcopyrite, galena, aurostibite, and sphalerite. Pyrrhotite is absent in the quartz veins.
Microprobe studies indicate that As content of homogeneous arsenopyrite grains ranges from 27. 0 to 31. 7 atm%, and gives mineralization temperatures from 170 to 430°C, although mostly from 300 to 400°C. Chlorite geothermometry using temperature dependence of substitution of Al for Si in the tetrahedral site gives formation temeratures of 330 to 400°C, comparable to the arsenopyrite temperatures. Applying sphalerite–pyrite–pyrrhotite geobarometry to sphalerite with FeS contents from 13. 6 to 12. 5 mol%, the pressure was estimated to be in a range from 5. 9 to 7. 0 kb at the stage of elevated temperatures.
Mineralogical observations, especially absence of pyrrhotite in the quartz veins, together with microprobe data for gold and associated minerals suggest that the fluids having ascended through fissures in the Ashanti deposit were reduced by the reaction with carbonaceous materials in the metasediments during the declining stage of the regional metamorphism.  相似文献   

17.
Middle Miocene (11.18–10.65 Ma) low sulfidation‐type epithermal gold mineralization occurred in the Cibaliung area, southwestern part of Java Island, Indonesia. It is hosted by andesitic to basaltic andesitic lavas of the Middle Miocene Honje Formation (11.4 Ma) and is covered by Pliocene Cibaliung tuff (4.9 Ma). The exploration estimates mineral resource of approximately 1.3 million tonnes at 10.42 g/t gold and 60.7 g/t silver at a 3 g/t Au cut‐off. This equates to approximately 435,000 ounces of gold and 2.54 million ounces of silver. That resource resulted from two ore shoots: Cibitung and Cikoneng. Studies on ore mineralogy, hydrothermal alteration, geology, fluid inclusion, stable isotopes and age dating were conducted in order to characterize the deposit and to understand a possible mechanism of preservation of the deposit. The ore mineral assemblage of the deposit consists of electrum, naumannite, Ag‐Se‐Te sulfide minerals, chalcopyrite, pyrite, sphalerite and galena. Those ore minerals occur in quartz veins showing colloform–crustiform texture. They are enveloped by mixed layer clay illite/smectite zone, which grades into smectite zone outward. The temperature of mineralization revealed by fluid inclusion study on quartz in the veins ranges from 170 and 220°C at shallow and deep level, respectively. The temperature range is in agreement with the temperature deduced from the hydrothermal alteration mineral assemblage including mixed layered illite/smectite and laumontite. The mineralizing fluid is dilute, with a salinity <1 wt% NaCl equivalent and has stable isotopes of oxygen and hydrogen composition indicating a meteoric water origin. Although the deposit is old enough that it would have been eroded in a tropical island arc setting, the coverage by younger volcanic deposits such as the Citeluk tuff and the Cibaliung tuff most probably prevented this erosion.  相似文献   

18.
The vein system in the Arinem area is a gold‐silver‐base metal deposit of Late Miocene (8.8–9.4 Ma) age located in the southwestern part of Java Island, Indonesia. The mineralization in the area is represented by the Arinem vein with a total length of about 5900 m, with a vertical extent up to 575 m, with other associated veins such as Bantarhuni and Halimun. The Arinem vein is hosted by andesitic tuff, breccia, and lava of the Oligocene–Middle Miocene Jampang Formation (23–11.6 Ma) and overlain unconformably by Pliocene–Pleistocene volcanic rocks composed of andesitic‐basaltic tuff, tuff breccia and lavas. The inferred reserve is approximately 2 million tons at 5.7 g t?1 gold and 41.5 g t?1 silver at a cut‐off of 4 g t?1 Au, which equates to approximately 12.5t of Au and 91.4t of Ag. The ore mineral assemblage of the Arinem vein consists of sphalerite, galena, chalcopyrite, pyrite, marcasite, and arsenopyrite with small amounts of pyrrhotite, argentite, electrum, bornite, hessite, tetradymite, altaite, petzite, stutzite, hematite, enargite, tennantite, chalcocite, and covellite. These ore minerals occur in quartz with colloform, crustiform, comb, vuggy, massive, brecciated, bladed and calcedonic textures and sulfide veins. A pervasive quartz–illite–pyrite alteration zone encloses the quartz and sulfide veins and is associated with veinlets of quartz–calcite–pyrite. This alteration zone is enveloped by smectite–illite–kaolinite–quartz–pyrite alteration, which grades into a chlorite–smectite–kaolinite–calcite–pyrite zone. Early stage mineralization (stage I) of vuggy–massive–banded crystalline quartz‐sulfide was followed by middle stage (stage II) of banded–brecciated–massive sulfide‐quartz and then by last stage (stage III) of massive‐crystalline barren quartz. The temperature of the mineralization, estimated from fluid inclusion microthermometry in quartz ranges from 157 to 325°C, whereas the temperatures indicated by fluid inclusions from sphalerite and calcite range from 153 to 218 and 140 to 217°C, respectively. The mineralizing fluid is dilute, with a salinity <4.3 wt% NaCl equiv. The ore‐mineral assemblage and paragenesis of the Arinem vein is characteristically of a low sulfidation epithermal system with indication of high sulfidation overprinted at stage II. Boiling is probably the main control for the gold solubility and precipitation of gold occurred during cooling in stage I mineralization.  相似文献   

19.
The Pojeonri Cu quartz veins occur in the north-western portion of the Hwanggangri Metallogenic Province and consist of two parallel massive quartz veins that fill fractures oriented NW and NE along fault zones in Paleozoic metasedimentary and sedimentary rocks of the Ogcheon and Taebaeg belts. Based on the mineralogy and paragenesis of the veins, only one mineralization episode has been recognized. The ore minerals are mainly chalcopyrite, pyrrhotite, and pyrite with minor arsenopyrite, sphalerite, galena and oxides of those base metal minerals.  相似文献   

20.
《Ore Geology Reviews》2009,35(4):580-596
The Semna gold deposit is one of several vein-type gold occurrences in the central Eastern Desert of Egypt, where gold-bearing quartz veins are confined to shear zones close to the boundaries of small granitoid stocks. The Semna gold deposit is related to a series of sub-parallel quartz veins along steeply dipping WNW-trending shear zones, which cut through tectonized metagabbro and granodiorite rocks. The orebodies exhibit a complex structure of massive and brecciated quartz consistent with a change of the paleostress field from tensional to simple shear regimes along the pre-existing fault segments. Textural, structural and mineralogical evidence, including open space structures, quartz stockwork and alteration assemblages, constrain on vein development during an active fault system. The ore mineral assemblage includes pyrite, chalcopyrite, subordinate arsenopyrite, galena, sphalerite and gold. Hydrothermal chlorite, carbonate, pyrite, chalcopyrite and kaolinite are dominant in the altered metaggabro; whereas, quartz, sericite, pyrite, kaolinite and alunite characterize the granodiorite rocks in the alteration zones. Mixtures of alunite, vuggy silica and disseminated sulfides occupy the interstitial open spaces, common at fracture intersections. Partial recrystallization has rendered the brecciation and open space textures suggesting that the auriferous quartz veins were formed at moderately shallow depths in the transition zone between mesothermal and epithermal veins.Petrographic and microthermometric studies aided recognition of CO2-rich, H2O-rich and mixed H2O–CO2 fluid inclusions in the gold-bearing quartz veins. The H2O–CO2 inclusions are dominant over the other two types and are characterized by variable vapor: liquid ratios. These inclusions are interpreted as products of partial mixing of two immiscible carbonic and aqueous fluids. The generally light δ34S of pyrite and chalcopyrite may suggest a magmatic source of sulfur. Spread in the final homogenization temperatures and bulk inclusion densities are likely due to trapping under pressure fluctuation through repeated fracture opening and sealing. Conditions of gold deposition are estimated on basis of the fluid inclusions and sulfur isotope data as 226–267 °C and 350–1100 bar, under conditions transitional between mesothermal and epithermal systems.The Semna gold deposit can be attributed to interplay of protracted volcanic activity (Dokhan Volcanics?), fluid mixing, wallrock sulfidation and a structural setting favoring gold deposition. Gold was transported as Au-bisulfide complexes under weak acid conditions concomitant with quartz–sericite–pyrite alteration, and precipitated through a decrease in gold solubility due to fluid cooling, mixing with meteoric waters and variations in pH and fO2.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号