共查询到20条相似文献，搜索用时 109 毫秒
1.
Brucite (Mg(OH)2) dissolution rate was measured at 25°C in a mixed-flow reactor at various pH (5 to 11) and ionic strengths (0.01 to 0.03 M) as a function of the concentration of 15 organic and 5 inorganic ligands and 8 divalent metals. At neutral and weakly alkaline pH, the dissolution is promoted by the addition of the following ligands ranked by decreasing effectiveness: EDTA ≥ H2PO4− > catechol ≥ HCO3− > ascorbate > citrate > oxalate > acetate ∼ lactate and it is inhibited by boric acid. At pH >10.5, it decreases in the presence of PO43−, CO32−, F−, oxine, salicylate, lactate, acetate, 4-hydroxybenzoate, SO42− and B(OH)4− with orthophosphate and borate being the strongest and the weakest inhibitor, respectively. Xylose (up to 0.1 M), glycine (up to 0.05 M), formate (up to 0.3 M) and fulvic and humic acids (up to 40 mg/L DOC) have no effect on brucite dissolution kinetics. Fluorine inhibits dissolution both in neutral and alkaline solutions. From F sorption experiments in batch and flow-through reactors and the analysis of reacted surfaces using X-ray Photoelectron Spectroscopy (XPS), it is shown that fluorine adsorption is followed by its incorporation in brucite lattice likely via isomorphic substitution with OH. The effect of eight divalent metals (Sr, Ba, Ca, Pb, Mn, Fe, Co and Ni) studied at pH 4.9 and 0.01 M concentration revealed brucite dissolution rates to be correlated with the water molecule exchange rates in the first hydration sphere of the corresponding cation.The effect of investigated ligands on brucite dissolution rate can be modelled within the framework of the surface coordination approach taking into account the adsorption of ligands on dissolution-active sites and the molecular structure of the surface complexes they form. The higher the value of the ligand sorption constant, the stronger will be its catalyzing or inhibiting effect. As for Fe and Al oxides, bi- or multidentate mononuclear surface complexes, that labilize Mg-O bonds and water coordination to Mg atoms at the surface, enhance brucite dissolution whereas bi- or polynuclear surface complexes tend to inhibit dissolution by bridging two or more metal centers and extending the cross-linking at the solid surface. Overall, results of this study demonstrate that very high concentrations of organic ligands (0.01-0.1 M) are necessary to enhance or inhibit brucite dissolution. As a result, the effect of extracellular organic products on the weathering rate of Mg-bearing minerals is expected to be weak. 相似文献
2.
Owen W Duckworth 《Geochimica et cosmochimica acta》2004,68(3):607-621
The dissolution of siderite (FeCO3) and rhodochrosite (MnCO3) under oxic and anoxic conditions is investigated at 298 K. The anoxic dissolution rate of siderite is 10−8.65 mol m−2 s−1 for 5.5 < pH < 12 and increases as [H+]0.75 for pH < 5.5. The pH dependence is consistent with parallel proton-promoted and water hydrolysis dissolution pathways. Atomic force microscopy (AFM) reveals a change in pit morphology from rhombohedral pits for pH > 4 to pits elongated at one vertex for pH < 4. Under oxic conditions the dissolution rate decreases to below the detection limit of 10−10 mol m−2 s−1 for 6.0 < pH < 10.3, and hillock precipitation preferential to steps is observed in concurrent AFM micrographs. X-ray photoelectron spectroscopy (XPS) and thermodynamic analysis identify the precipitate as ferrihydrite. At pH > 10.3, the oxic dissolution rate is as high as 10−7.5 mol m−2 s−1, which is greater than under the corresponding anoxic conditions. A fast electron transfer reaction between solution O2 or [Fe3+(OH)4]− species and surficial >FeII hydroxyl groups is hypothesized to explain the dissolution kinetics. AFM micrographs do not show precipitation under these conditions. Anoxic dissolution of rhodochrosite is physically observed as rhombohedral pit expansion for 3.7 < pH < 10.3 and is chemically explained by parallel proton- and water-promoted pathways. The dissolution rate law is 10−4.93[H+] + 10−8.45 mol m−2 s−1. For 5.8 < pH < 7.7 under oxic conditions, the AFM micrographs show a tabular precipitate growing by preferential expansion along the a-axis, though the macroscopic dissolution rate is apparently unaffected. For pH > 7.7 under oxic conditions, the dissolution rate decreases from 10−8.45 to 10−9.0 mol m−2 s−1. Flattened hillock precipitates grow across the entire surface without apparent morphological influence by the underlying rhodochrosite surface. XPS spectra and thermodynamic calculations implicate the precipitate as bixbyite for 5.8 < pH < 7.7 and MnOOH (possibly feitnkechtite) for pH >7.7. 相似文献
3.
Hilda Cornejo-Garrido Pilar Fernández-Lomelín Javiera Cervini-Silva 《Geochimica et cosmochimica acta》2008,72(12):2754-2766
Microorganisms and higher plants produce biogenic ligands, such as siderophores, to mobilize Fe that otherwise would be unavailable. In this paper, we study the stability of arsenopyrite (FeAsS), one of the most important natural sources of arsenic on Earth, in the presence of desferrioxamine (DFO-B), a common siderophore ligand, at pH 5. Arsenopyrite specimens from mines in Panasqueira, Portugal (100-149 μm) that contained incrustations of Pb, corresponding to elemental Pb as determined by scanning electron microscopy-electron diffraction spectroscopy (SEM-EDX), were used for this study. Batch dissolution experiments of arsenopyrite (1 g L−1) in the presence of 200 μM DFO-B at initial pH (pH0) 5 were conducted for 110 h. In the presence of DFO-B, release of Fe, As, and Pb showed positive trends with time; less dependency was observed for the release of Fe, As, and Pb in the presence of only water under similar experimental conditions. Detected concentrations of soluble Fe, As, and Pb in suspensions containing only water were found to be ca. 0.09 ± 0.004, 0.15 ± 0.003, and 0.01 ± 0.01 ppm, respectively. In contrast, concentrations of soluble Fe, As, and Pb in suspensions containing DFO-B were found to be 0.4 ± 0.006, 0.27 ± 0.009, and 0.14 ± 0.005 ppm, respectively. Notably, the effectiveness of DFO-B for releasing Pb was ca. 10 times higher than that for releasing Fe. These results cannot be accounted for by thermodynamic considerations, namely, by size-to-charge ratio considerations of metal complexation by DFO-B. As determined by SEM-EDX, elemental sample enrichment analysis supports the idea that the Fe-S subunit bond energy is limiting for Fe release. Likely, the mechanism(s) of dissolution for Pb incrustations is independent and occurs concurrently to that for Fe and As. Our results show that dissolution of arsenopyrite leads to precipitation of elemental sulfur, and is consistent with a non-enzymatic mineral dissolution pathway. Finally, speciation analyses for As indicate variability in the As(III)/As(V) ratio with time, regardless of the presence of DFO-B or water. At reaction times <30 h, As(V) concentrations were found to be 50-70%, regardless of the presence of DFO-B. These results are interpreted to indicate that transformations of As are not imposed by ligand-mediated mechanisms. Experiments were also conducted to study the dissolution behavior of galena (PbS) in the presence of 200 μM at pH0 5. Results show that, unlike arsenopyrite, the dissolution behavior of galena shows coupled increases in pH with decreases in metal solubility at t > 80 h. Oxidative dissolution mechanisms conveying sulfur oxidation bring about the production of {H+}. However, dissolution data trends for arsenopyrite and galena indicate {H+} consumption. It is plausible that the formation of Pb species is dependent on {H+} and {OH−}, namely, stable surface hydroxyl complexes of the form (pH50 5.8) and for pH values 5.8 or above. 相似文献
4.
5.
Owen W Duckworth 《Geochimica et cosmochimica acta》2003,67(10):1787-1801
Mineral dissolution rates have been rationalized in the literature by surface complexation models (SCM) and morphological and geometric models (GM), and reconciliation of these conceptually different yet separately highly successful models is an important goal. In the current work, morphological alterations of the surface are observed in real time at the microscopic level by atomic force microscopy (AFM) while dissolution rates are simultaneously measured at the macroscopic level by utilizing the AFM fluid cell as a classic flow-through reactor. Rhodochrosite dissolution is studied from pH = 2 to 11 at 298 K, and quantitative agreement is found between the dissolution rates determined from microscopic and macroscopic observations. Application of a SCM model for the interpretation of the kinetic data indicates that the surface concentration of >CO3H regulates dissolution for pH < 7 while the surface concentration of >MnOH2+ regulates dissolution for pH > 7. A GM model explains well the microscopic observations, from which it is apparent that dissolution occurs at steps associated with anisotropic pit expansion. On the basis of the observations, we combine the SCM and GM models to propose a step-site surface complexation model (SSCM), in which the dissolution rates are quantitatively related to the surface chemical speciation of steps. The governing SSCM equation is as follows: R = χ1/2(kco + kca)[>CO3H] + χ1/2(kmo + kma)[>MnOH2+ ], where R is the dissolution rate (mol m−2 s−1), 2χ1/2 is the fraction of surface sites located at steps, [>CO3H] and [>MnOH2+ ] are surface concentrations (mol m−2), and kco, kca, kmo, and kma are the respective dissolution rate coefficients (s−1) for the >CO3H and the >MnOH2+ surface species on obtuse and acute steps. We find kco = 2.7 s−1, kca = 2.1 × 10−1 s−1, kmo = 4.1 × 10−2 s−1, kma = 3.7 × 10−2 s−1, and χ1/2 = 0.015 ± 0.005. The rate coefficients quantify the net result of complex surface step processes, including double-kink initiation and single-kink propagation. We propose that the SSCM model may have general applicability for dissolution far from equilibrium of flat mineral surfaces of ionic crystals, at least those that dissolve by step retreat. 相似文献
6.
Electric potentials of the (0 0 1) surface of hematite were measured as a function of pH and ionic strength in solutions of sodium nitrate and oxalic acid using the single-crystal electrode approach. The surface is predominantly charge-neutral in the pH 4-14 range, and develops a positive surface potential below pH 4 due to protonation of μ-OH0 sites (pK1,1,0,int = −1.32). This site is resilient to deprotonation up to at least pH 14 (−pK−1,1,0,int ? 19). The associated Stern layer capacitance of 0.31-0.73 F/m2 is smaller than typical values of powders, and possibly arises from a lower degree of surface solvation. Acid-promoted dissolution under elevated concentrations of HNO3 etches the (0 0 1) surface, yielding a convoluted surface populated by sites. The resulting surface potential was therefore larger under these conditions than in the absence of dissolution. Oxalate ions also promoted (0 0 1) dissolution. Associated electric potentials were strongly negative, with values as large as −0.5 V, possibly from metal-bonded interactions with oxalate. The hematite surface can also acquire negative potentials in the pH 7-11 range due to surface complexation and/or precipitation of iron species (0.0038 Fe/nm2) produced from acidic conditions. Oxalate-bearing systems also result in negative potentials in the same pH range, and may include ferric-oxalate surface complexes and/or surface precipitates. All measurements can be modeled by a thermodynamic model that can be used to predict inner-Helmholtz potentials of hematite surfaces. 相似文献
7.
Barry R. Bickmore Justin C. Wheeler Kathryn L. Nagy 《Geochimica et cosmochimica acta》2008,72(18):4521-4536
In light of recent work on the reactivity of specific sites on large (hydr)oxo-molecules and the evolution of surface topography during dissolution, we examined the ability to extract molecular-scale reaction pathways from macroscopic dissolution and surface charge measurements of powdered minerals using an approach that involved regression of multiple datasets and statistical graphical analysis of model fits. The test case (far-from-equilibrium quartz dissolution from 25 to 300 °C, pH 1-12, in solutions with [Na+] ? 0.5 M) avoids the objections to this goal raised in these recent studies. The strategy was used to assess several mechanistic rate laws, and was more powerful in distinguishing between models than the statistical approaches employed previously. The best-fit model included three mechanisms—two involving hydrolysis of Si centers by H2O next to neutral (>Si-OH0) and deprotonated (>Si-O−) silanol groups, and one involving hydrolysis of Si centers by OH−. The model rate law is
8.
Steady-state magnesite dissolution rates were measured in mixed-flow reactors at 150 and 200 °C and 4.6 < pH < 8.4, as a function of ionic strength (0.001 M ? I ? 1 M), total dissolved carbonate concentration (10−4 M < ΣCO2 < 0.1 M), and distance from equilibrium. Rates were found to increase with increasing ionic strength, but decrease with increasing temperature from 150 to 200 °C, pH, and aqueous CO32− activity. Measured rates were interpreted using the surface complexation model developed by Pokrovsky et al. (1999a) in conjunction with transition state theory (Eyring, 1935). Within this formalism, magnesite dissolution rates are found to be consistent with
9.
Fabrice Fraysse Oleg S. Pokrovsky Jacques Schott Jean-Dominique Meunier 《Chemical Geology》2009,258(3-4):197-206
In order to better understand the reactivity of plant phytoliths in soil solutions, we determined the solubility, surface properties (electrophoretic mobilities and surface charge) and dissolution kinetics of phytoliths extracted from fresh biomass of representative plant species (larch tree and elm, horsetail, fern, and four grasses) containing significant amount of biogenic silica. The solubility product of larch, horsetail, elm and fern phytoliths is close to that of amorphous silica and soil bamboo phytoliths. Electrophoretic measurements yield isoelectric point pHIEP = 0.9, 1.1, 2.0 and 2.2 for four grasses, elm, larch and horsetail phytoliths respectively, which is very close to that of quartz or amorphous silica. Surface acid–base titrations allowed generation of a 2-pK surface complexation model (SCM) for larch, elm and horsetail phytoliths. Phytoliths dissolution rates, measured in mixed-flow reactors at far from equilibrium conditions at 1 ≤ pH ≤ 8, were found to be very similar among the species, and close to those of soil bamboo phytoliths. Mechanistic treatment of all plant phytoliths dissolution rates provided three-parameters equation sufficient to describe phytoliths reactivity in aqueous solutions:Alternatively, the dissolution rate dependence on pH can be modeled within the concept of surface coordination theory assuming the rate proportional to concentration of > SiOH2+, > SiOH0 and > SiO? species. In the range of Al concentration from 20 to 5000 ppm in the phytoliths, we have not observed any correlation between their Al content and solubility, surface acid–base properties and dissolution kinetics.It follows from the results of this study that phytoliths dissolution rates exhibit a minimum at pH ～ 3. Mass-normalized dissolution rates are similar among all four types of plant species studied and these rates are an order of magnitude higher than those of typical soil clay minerals. The minimal half life time of larch and horsetail phytoliths in the interstitial soil solution ranges from 10–12 years at pH = 2–3 to < 1 year at pH above 6, comparable with mean residence time of phytoliths in soil from natural observations. 相似文献
10.
Calcium carbonate scaling poses highly challenging tasks for its prediction and preventative action. Here an elemental, isotopic and modelling approach was used to decipher the evolution of alkaline tunnel drainage solutions and sinter formation mechanisms for 3 sites in Austria. Drainage solutions originate from local groundwater and form their characteristic chemical composition by interaction with shotcrete/concrete. This interaction is indicated by a positive correlation of dissolved K+ and pH (up to 12.3), and a decrease of aqueous Mg2+ by the formation of brucite (pH > 10.5). Variability in Ca2+ and DIC is strongly attributed to portlandite dissolution, calcite precipitation and CO2 exchange with the atmosphere, where the 13C/12C and 18O/16O signatures of calcite can be traced back to the source of carbonate. The internal PCO2 value is a reliable proxy to evaluate whether uptake of CO2 results in an increase or decrease of the degree of calcite saturation with a threshold value of 10−6.15 atm at 25 °C (pH ≈ 11). Precipitation rates of calcite are highest at pH ≈ 10. Mixing of groundwater-like solutions with strong alkaline drainage solutions has to be considered as a crucial factor for evaluating apparent composition of drainage solutions and calcite precipitation capacities. 相似文献
11.
Chlorite dissolution in the acid ph-range: a combined microscopic and macroscopic approach 总被引：1，自引：0，他引：1
The dissolution of chlorite with intermediate Fe-content was studied macroscopically via mixed flow experiments as well as microscopically via atomic force microscopy (AFM). BET surface area normalized steady state dissolution rates at 25 °C for pH 2 to 5 vary between 10−12 and 10−13 mol/m2.s. The order of the dissolution reaction with respect to protons was calculated to be about 0.29. For pH 2 to 4, chlorite was found to dissolve non-stoichiometrically, with a preferred release of the octahedrally coordinated cations. The additional release of octahedrally coordinated cations may be due to the transformation of chlorite to interstratified chlorite/vermiculite from the grain edges inward.In-situ atomic force microscopy performed on the basal surfaces of a chlorite sample, which has been preconditioned at pH 2 for several months, indicated a defect controlled dissolution mechanism. Molecular steps with height differences which correspond to the different subunits of chlorite, e.g. TOT sheet and brucite like layer, originated at surface defects such or compositional inhomogenities or cracks, which may be due to the deformation history of the chlorite sample. In contrast to other sheet silicates, at pH 2 nanoscale etch pits occur on the chlorite basal surfaces within flat terraces terminated by a TOT-sheet as well as within the brucite like layer. The chlorite basal surface dissolves layer by layer, because most of the surface defects are only expressed through single TOT or brucite-like layers. The defect controlled dissolution mechanism favours dissolution of molecular steps on the basal surfaces compared to dissolution of the grain edges. At pH 2 the dissolution of the chlorite basal surface is dominated by the retreat of 14 Å steps, representing one chlorite unit cell.The macroscopic and microscopic chlorite dissolution rates can be linked via the reactive surface area as identified by AFM. The reactive surface area with respect to dissolution consists of only 0.2% of the BET-surface area. A dissolution rate of 2.5 × 10−9 mol/m2s was calculated from macroscopic and microscopic dissolution experiments at pH 2, when normalized to the reactive surface area. 相似文献
12.
The dissolution of well crystallized gibbsite far at from equilibrium was studied in batch and mixed flow through reactors. The dissolution experiments were carried out between pH 2 and 6 in the presence of 10 mmol L−1 citrate, at pH 2 and 3 in the presence of 10 mmol L−1 chloride, nitrate, and sulfate, and at pH 2 and 3 in the presence of 1.5 mmol L−1 silica at 20°C. The dissolution rate of gibbsite, RAl (mol m−2 s−1), increases in the order of chloride ≈ nitrate < silica < sulfate ≈ citrate. In presence of silica, sulphate, and citrate dissolution is catalysed by the formation of aluminium complexes at the gibbsite surface (pH 2 and 3). From pH 2 to 3 no effect of RAl on hydrogen activity is predicted as singly coordinated surface sites at the edges of the platy gibbsite crystals, [≡AlOH2+0.5] ≈ [≡AlOH], are almost saturated with protons. However at pH >3 dissolution is slowed by a decrease of [≡AlOH2+0.5].Gibbsite dissolution rates measured in closed and open systems were identical within the experimental and analytical uncertainty. This observation indicates that gibbsite dissolution is a surface controlled process. If dissolution of gibbsite occurs close to equilibrium RAl values may be predicted by an approximately linear function of ΔGr. 相似文献
13.
Keren Amram 《Geochimica et cosmochimica acta》2005,69(10):2535-2546
The main goal of this paper is to propose a new rate law describing the combined effect of pH (1 to 4.5) and temperature (25 to 70 °C) on smectite dissolution rate, under far from equilibrium conditions, as a step towards establishing the full rate law of smectite dissolution under acidic conditions. Dissolution experiments were carried out using non-stirred flow-through reactors fully immersed in a thermostatic water bath held at a constant temperature of 25.0°C, 50.0°C or 70.0°C ± 0.1°C. Smectite dissolution rates were obtained based on the release of silicon and aluminum at steady state. The results show good agreement between these two estimates of smectite dissolution rate. Low Al/Si ratios were obtained in experiments that were conducted at pH ≥4. These low Al/Si ratios are explained by precipitation of gibbsite and/or diaspore.Dissolution rate increases with temperature and decreases with increasing pH. Dissolution rates of experiments in which ΔGr ≤ −21 kcal mol −1, are not affected by deviation from equilibrium. Dissolution rates in most experiments are not affected by the addition of up to 0.3 M NaNO3 to the input solution.A simple model is used to describe the combined effect of pH and temperature on smectite dissolution rate. According to this model, dissolution rate is linearly proportional to the concentration of adsorbed protons on the mineral surface, and proton adsorption is described using a Langmuir adsorption isotherm. All experimental results at pH <4 were fitted to the model using a multiple non-linear regression. The resulting rate law is:
(A1) 相似文献
14.
Far from equilibrium enstatite dissolution rates both open to atmospheric CO2 and CO2 purged were measured as a function of solution pH from 8 to 13 in batch reactors at room temperature. Congruent dissolution was observed after an initial period of incongruent dissolution with preferential Si release from the enstatite. Steady-state dissolution rates in open to atmospheric CO2 conditions decrease with increase in solution pH from 8 to 12 similar to the behavior reported by other investigators. Judging from the pH 13 dissolution rate, rates increase with pH above pH 12. This is thought to occur because of the increase in overall negative surface charges on enstatite as Mg surface sites become negative above pH 12.4, the pH of zero surface charge of MgO.Steady-state dissolution rates of enstatite increase above pH 10 when CO2 was purged by performing the experiments in a N2 atmosphere. This suggests inhibition of dissolution rates above pH 10 when experiments were open to the atmosphere. The dissolved carbonate in these solutions becomes dominantly CO32− above pH 10.33. It is argued that CO32− forms a >Mg2-CO3 complex at positively charged Mg surface sites on enstatite, resulting in stabilization of the surface Si-O bonds. Therefore, removal of solution carbonate results in an increase in dissolution rates of enstatite above pH 10. The log rate of CO2-purged enstatite dissolution in moles per cm2 per s as a function of increasing pH above pH 10 is equal to 0.35. This is consistent with the model of silicate mineral dissolution in the absence of surface carbonation in alkaline solutions proposed earlier in the literature. 相似文献
15.
Sedimentary iron geochemistry in acidic waterways associated with coastal lowland acid sulfate soils 总被引：1，自引：0，他引：1
Edward D. Burton Richard T. Bush Leigh A. Sullivan 《Geochimica et cosmochimica acta》2006,70(22):5455-5468
We examined the solubility, mineralogy and geochemical transformations of sedimentary Fe in waterways associated with coastal lowland acid sulfate soils (CLASS). The waterways contained acidic (pH 3.26-3.54), FeIII-rich (27-138 μM) surface water with low molar Cl:SO4 ratios (0.086-5.73). The surficial benthic sediments had high concentrations of oxalate-extractable Fe(III) due to schwertmannite precipitation (kinetically favoured by 28-30% of aqueous surface water Fe being present as the FeIII species). Subsurface sediments contained abundant pore-water HCO3 (6-20 mM) and were reducing (Eh < −100 mV) with pH 6.0-6.5. The development of reducing conditions caused reductive dissolution of buried schwertmannite and goethite (formed via in situ transformation of schwertmannite). As a consequence, pore-water FeII concentrations were high (>2 mM) and were constrained by precipitation-dissolution of siderite. The near-neutral, reducing conditions also promoted SO4-reduction and the formation of acid-volatile sulfide (AVS). The results show, for the first time for CLASS-associated waterways, that sedimentary AVS consisted mainly of disordered mackinawite. In the presence of abundant pore-water FeII, precipitation-dissolution of disordered mackinawite maintained very low (i.e. <0.1 μM) S−II concentrations. Such low concentrations of S−II caused slow rates for conversion of disordered mackinawite to pyrite, thereby resulting in relatively low concentrations of pyrite (<300 μmol g−1 as Fe) compared to disordered mackinawite (up to 590 μmol g−1 as Fe). This study shows that interactions between schwertmannite, goethite, siderite, disordered mackinawite and pyrite control the geochemical behaviour of sedimentary Fe in CLASS-associated waterways. 相似文献
16.
The rates of Sb(III) oxidation by O2 and H2O2 were determined in homogeneous aqueous solutions. Above pH 10, the oxidation reaction of Sb(III) with O2 was first order with respect to the Sb(III) concentration and inversely proportional to the H+ concentrations at a constant O2 content of 0.22 × 10−3 M. Pseudo-first-order rate coefficients, kobs, ranged from 3.5 × 10−8 s−1 to 2.5 × 10−6 s−1 at pH values between 10.9 and 12.9. The relationship between kobs and pH was:
17.
We studied selenite () retention by magnetite () using both surface complexation modeling and X-ray absorption spectroscopy (XAS) to characterize the processes of adsorption, reduction, and dissolution/co-precipitation. The experimental sorption results for magnetite were compared to those of goethite (FeIIIOOH) under similar conditions. Selenite sorption was investigated under both oxic and anoxic conditions and as a function of pH, ionic strength, solid-to-liquid ratio and Se concentration. Sorption onto both oxides was independent of ionic strength and decreased as pH increased, as expected for anion sorption; however, the shape of the sorption edges was different. The goethite sorption data could be modeled assuming the formation of an inner-sphere complex with iron oxide surface sites (SOH). In contrast, the magnetite sorption data at low pH could be modeled only when the dissolution of magnetite, the formation of aqueous iron-selenite species, and the subsequent surface complexation of these species were implemented. The precipitation of ferric selenite was the predominant retention process at higher selenite concentrations (>1 × 10−4 M) and pH < 5, which was in agreement with the XAS results. Sorption behavior onto magnetite was similar under oxic and anoxic conditions. Under anoxic conditions, we did not observe the reduction of selenite. Possible reasons for the absence of reduction are discussed. In conclusion, we show that under acidic reaction conditions, selenite retention by magnetite is largely influenced by dissolution and co-precipitation processes. 相似文献
18.
A. Ninh Pham 《Geochimica et cosmochimica acta》2006,70(3):640-650
The kinetics of Fe(III) precipitation in synthetic buffered waters have been investigated over the pH range 6.0-9.5 using a combination of visible spectrophotometry, 55Fe radiometry combined with ion-pair solvent extraction of chelated iron and numerical modeling. The rate of precipitation, which is first order with respect to both dissolved and total inorganic ferric species, varies by nearly two orders of magnitude with a maximum rate constant of 16 ± 1.5 × 106 M−1 s−1 at a pH of around 8.0. Our results support the existence of the dissolved neutral species, Fe(OH)30, and suggest that it is the dominant precursor in Fe(III) polymerization and subsequent precipitation at circumneutral pH. The intrinsic rate constant of precipitation of Fe(OH)30 was calculated to be allowing us to predict rates of Fe(III) precipitation in the pH range 6.0-9.5. The value of this rate constant, and the variation in the precipitation rate constant over the pH range considered, are consistent with a mechanism in which the kinetics of iron precipitation are controlled by rates of water exchange in dissolved iron hydrolysis species. 相似文献
19.
20.
Fabrice Fraysse Oleg S. Pokrovsky Jacques Schott 《Geochimica et cosmochimica acta》2006,70(8):1939-1951
Although phytoliths, constituted mainly by micrometric opal, exhibit an important control on silicon cycle in superficial continental environments, their thermodynamic properties and reactivity in aqueous solution are still poorly known. In this work, we determined the solubility and dissolution rates of bamboo phytoliths collected in the Réunion Island and characterized their surface properties via electrophoretic measurements and potentiometric titrations in a wide range of pH. The solubility product of “soil” phytoliths ( at 25 °C) is equal to that of vitreous silica and is 17 times higher than that of quartz. Similarly, the enthalpy of phytoliths dissolution reaction is close to that of amorphous silica but is significantly lower than the enthalpy of quartz dissolution. Electrophoretic measurements yield isoelectric point pHIEP = 1.2 ± 0.1 and 2.5 ± 0.2 for “soil” (native) and “heated” (450 °C heating to remove organic matter) phytoliths, respectively. Surface acid-base titrations allowed generation of a 2-pK surface complexation model. Phytoliths dissolution rates, measured in mixed-flow reactors at far from equilibrium conditions at 2 ? pH ? 12, were found to be intermediate between those of quartz and vitreous silica. The dissolution rate dependence on pH was modeled within the concept of surface coordination theory using the equation: