首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 593 毫秒
1.
《Quaternary Science Reviews》2007,26(19-21):2354-2374
The glacial sediments of north Norfolk are a type site for subglacial deforming bed sediments. This investigation focussed on subglacial shear zone process at the field and thin section scale, in order to understand subglacial processes, as well as considering the implications for regional stratigraphies. The sandy and chalky tills from three sites (within 1 km) at Weybourne, Norfolk, showed evidence for subglacial deformation associated with simple shear, producing extension, compression and rotation. It was demonstrated how these processes interacted to cause chalk fragmentation and predictable fabric strengths (dependant on sorting and grain size). It is suggested that the ‘Marly Drift’ is a diachronous unit, and the resultant stratigraphy at Weybourne reflects one deformation till, resulting from a series of ice advances, but with a lithology derived from the local chalk bed rock (with some far travelled erratics), which have undergone different degrees of chalk fragmentation reflecting the nature and duration of the subglacial deformation.  相似文献   

2.
Analysis of till micromorphology represents a relatively new technique that has been used most frequently to infer the importance of subglacial shear in till genesis. This study aims to calibrate the technique by comparing Pleistocene tills from United Kingdom with a modern till (the UpB till) from beneath Ice Stream B, West Antarctica. Despite the fact that all of the tills examined have been interpreted as deforming‐bed deposits, the modern till has significantly less abundant and diverse microstructures than those found in the Pleistocene tills. Seventeen examined thin‐sections of the UpB till contain recognisable microstructures over only 0–30% of individual thin‐section area. The most common microstructures are: (i) birefringent clay patterns that are interpreted as shear zones and (ii) adherent matrix structures, which we interpret as uncomminuted remnants of the parent glacial/glaciomarine diamictons. Fourteen thin‐sections of the Pleistocene tills were covered by microstructures in 10–95% of their area. The Pleistocene microstructures include birefringent clays and adherent matrix structures, as in the UpB till, but also laminations and deformed pods made of chalk and sorted sediments. We conclude that the same till‐forming process, i.e. subglacial deformation, may result in distinctly different till micromorphology. This is a consequence of the fact that microstructural characteristics are strongly influenced by factors other than shear deformation. We identify three controls that may be important for forming contrasting microstructural assemblages: (i) strain magnitude, (ii) the degree of heterogeneity of parent material, and (iii) relative importance of sediment sorting by flowing water in the subglacial environment. Thus till micromorphology is sensitive to multiple factors, which with proper calibration may enhance the existing capability to interpret past subglacial conditions from microstructures. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

3.
This study investigates the variations in erosional processes beneath Briksdalsbreen; a Norwegian valley glacier, with a thin coarse grained deforming bed. The subglacial zone was investigated in situ, close to the central glacial flow line (Site A) and close to the valley wall (Site B), via boreholes. The till was collected using two different sediment samplers and the bed was examined using a borehole video camera. In order to evaluate how representative borehole sampling was of the subglacial environment, the results from in situ subglacial samples were compared with random samples taken from an exposed subglacial surface in the glacier foreland, as well as a sample taken from the site after glacier retreat. The results indicated that the texture of the exposed subglacial surface was similar to in situ samples from subglacial Site B (close to the valley wall), and that the samples collected with the ‘small’ sediment sampler had the closest fit. SEM analysis revealed eroded quartz grains at both sites as a result of rotation (abrasion) and fracture. The samples from close to the valley wall were very poorly sorted, with evidence for rounding and preservation of pre-weathered surfaces, which suggest that a relatively simple pattern of erosion from crushing to rotation dominated. However, the till from the centre of the glacier was better sorted, more angular, and with few pre-weathered surfaces. We suggest that this results from a more complex glacial erosional history associated with greater strain and longer residence time within the deforming layer. When compared with other deformation tills, it was confirmed that there is a relationship between grain size and erosional style. Clay-rich tills show little comminution, fine sand-rich tills generate a significant silt component, whilst the coarse sand-rich tills at Briksdalsbreen showed complex deformational styles but no significant silt component.  相似文献   

4.
Menzies, J. & Ellwanger, D. 2010: Insights into subglacial processes inferred from the micromorphological analyses of complex diamicton stratigraphy near Illmensee‐Lichtenegg, Höchsten, Germany. Boreas, 10.1111/j.1502‐3885.2010.00194.x. ISSN 0300‐9483. Investigations of a 30‐m‐high section of Pleistocene sediments at Illmensee‐Lichtenegg, Höchsten in Baden‐Württemberg provide detailed information on subglacial conditions beneath the Rhine Glacier outlet of the Alpine ice sheet in southern Germany. The sediment exposure extends from an upper cemented sand and gravel (Deckenschotter) into diamictic units that extend down to weathered Molasse bedrock. The exposure reveals sediments symptomatic of active syndepositional stress/strain processes ongoing beneath the ice sheet. Macrosedimentology reveals diamicton subfacies units and a strong uni‐direction of ice motion based on clast fabric analyses. At the microscale level, thin‐section analyses provide a substantially clearer picture of the dynamics of subglacial sediment deformation and till emplacement. Evidence based on detailed micromorphological analyses reveals microstructural strain and depositional markers that indicate a subglacial environment of ongoing soft bed deformation in which the diamictons can be readily identified as subglacial tills. Within this subglacial environment, distinct changes in pore‐water pressure and sediment rheology can be detected. These changes reveal fluctuating conditions of progressive, non‐pervasive deformation associated with rapid changes in effective stress and shear strain leading to till emplacement. This site, through the application of micromorphology, increases our understanding of localized subglacial conditions and till formation.  相似文献   

5.
Much previous research at surge-type glaciers has sought to identify features diagnostic of surge-type behaviour. However, in comparatively little work have subglacial landform–sediment characteristics been used to reconstruct changing basal processes and conditions during surge events. Subglacial bedforms described in this article are associated with the 1991 surge of Skeiðarárjökull, Iceland, and include a series of drumlins with superimposed flutes and basal crevasse-fill ridges. The drumlins were formed by the subglacial erosion of ice-contact fans. Sedimentary evidence indicates a shift from rigid-bed to soft-bed conditions during the surge. The presence of eroded but undeformed fan sediments suggests that they acted as a rigid bed when initially overridden. Subsequent deposition of a layer of deformation till resulted in a change to soft-bed conditions and the generation of flutes and subglacial crevasse-fill ridges. The lack of mixing between this till and the underlying stratified sediments indicates that subglacial sediment deformation was restricted to a thin layer and that its deposition resulted in a cessation of subglacial erosion. The drumlin is therefore a composite of both rigid-bed and soft-bed processes that illustrates changes in basal conditions and processes during the course of the event. The limited time frame in which the drumlin formed and the presence of kettleholes across its surface are distinctive features that may warrant further investigation in the search for features diagnostic of past surge events.  相似文献   

6.
Geologic evidence such as subglacial troughs and grounding zone wedges indicate that soft-bedded, West Antarctic ice streams are capable of eroding, transporting and depositing large volumes of debris at high rates (˜100 m3 yr-1 per meter width). In order to understand the dynamics of ice streams and the geologic effects of their activity, it is important to understand the physical mechanisms that control these high rates of sub-ice-stream sediment generation and transport. Here, we use a numerical model of Ice Stream C run over c. 8500 model years to quantify the effects of a recently proposed, till-ploughing mechanism of till formation and redistribution beneath ice streams (Tulaczyk et al. 2001; Clark et al. in press). Our results show that this 'transport-limited' mechanism, in which till transport rates scale with ice velocity and erosion rates with spatial gradients of velocity, is consistent with existing constraints. For instance, our model results predict significantly higher (˜0.6 mm yr-1) average erosion rates beneath ice-stream tributaries, which are underlain by deep subglacial troughs, than beneath ice-stream trunks (˜0.2mm yr-1), whose subglacial troughs have a significantly smaller relief. We would not obtain this satisfactory result if subglacial erosion was parametrized in the model using the more traditional approach of scaling erosion rates with ice velocity (what we call the 'production-limited' parametrization). Because of the requirement of ice continuity, the magnitude of ice velocity generally increases downstream in polar ice streams, and so do the production-limited erosion rates. Pending further investigations, we propose that geologic and geomorphic effects of soft-bedded ice streams should be quantified using some form of a 'transport-limited' parametrization of subglacial erosion rates, e.g. the till-ploughing mechanism.  相似文献   

7.
This paper presents the first integrated macroscale and microscale examination of subglacial till associated with the last‐glacial (Fraser Glaciation) Cordilleran Ice Sheet (CIS). A new statistical approach to quantifying till micromorphology (multivariate hierarchical cluster analysis for compositional data) is also described and implemented. Till macrostructures, macrofabrics and microstructures support previous assertions that primary till in this region formed through a combination of lodgement and deformation processes in a temperate subglacial environment. Macroscale observations suggest that subglacial environments below the CIS were probably influenced by topography, whereby poor drainage of the substrate in topographically constricted areas, or on slopes adverse to the ice‐flow direction at glacial maximum, facilitated ductile deformation of the glacier bed. Microscale observations suggest that subglacial till below the CIS experienced both ductile and brittle deformation, including grain rotation and squeeze flow of sediment between grains under moist conditions, and microshearing, grain stacking and grain fracturing under well‐drained conditions. Macroscale observations suggest that ductile deformation events were probably followed by brittle deformation events as the substrate subsequently drained. The prevalence of ductile‐type microstructures in most till exposures investigated in this study suggests that ductile deformation signatures can be preserved at the microscale after brittle deformation events that result in larger‐scale fractures and shear structures. It is likely that microscale ductile deformation can also occur within distributed shear zones during lodgement processes. Cluster analysis of microstructure data and qualitative observations made from thin sections suggest that the relative frequency of countable microstructures in this till is influenced by topography in relation to ice‐flow direction (bed drainage conditions) as well as by the frequency and distribution of voids in the till matrix and skeletal grain shapes.  相似文献   

8.
Subglacial erosional forms are commonly found on bedrock substrates inside the Late Weichselian ice margin in County Donegal, northwest Ireland, and can be used to provide detailed information on subglacial processes and environments. The erosional forms occur on spatial scales from whalebacks (tens of metres in scale), to asymmetric and channelized bedrock-cut scours (tens of cm in scale) and striations (mm scale). Processes responsible for development of subglacial erosional forms occur along a continuum, from free meltwater existing as a laterally extensive sheet at the ice-bed interface, to abrasion by basal ice. Channelized bedrock-cut scours are particularly common in County Donegal, and show asymmetric and meandering thalwegs, U-shaped cross-profiles and steep lateral margins. Innermost parts of the scours are highly polished and have striations that follow thalweg direction. In places, bedrock surfaces are overlain by a delicate polish and thin calcite cement, and are buried beneath glacial till. Based on their morphology, the bedrock scours are interpreted as s-forms caused by high-pressure subglacial meltwater erosion. Striations within the scoured channels reflect periods of ice-bed coupling and subglacial abrasion. The range of features observed here was used to consider relationships between subglacial topography, hydraulic processes and ice-bed coupling. Precipitation of calcite cement took place in depressions on the bedrock surface by CO2 degassing. Infilling of depressions by glacial till formed a new type of 'sticky spot' related to spatial variations in subglacial water pressure. The temporal evolution of sticky spots reflects interactions within the subglacial environment between subglacial relief, hydraulic regime and ice-bed coupling.  相似文献   

9.
Structural, stratigraphic, and lithologic data from a section 69 m long of Catfish Creek drift (north shore of Lake Erie) tell a complex story of two competing glacial lobes. Stone surface features and orientations indicate that stones rotated in viscously deforming, fine-medium textured subglacial till prior to final emplacement. Fractures, shears, and attenuated sediment lenses in tills reveal that they experienced some brittle shear superposed on ductile shear during till dewatering and stiffening. The Huron-Georgian Bay lobe advanced first from the northwest, deforming interstadial sediments and depositing subglacial till. Next, southward confluent flow of the Huron, Georgian Bay, and Erie lobes carved subglacial troughs into sediments and deposited (then deformed) bouldery deformation till by squeeze flow. The northwest flowing Erie lobe then prevailed, depositing deformation till, subglacial aquatic sediments, and mudflows. Finally, a pavement-bearing, hybrid deformation-lodgement till covered the section. Till formation was mainly by subglacial viscous flow with minor lodgement superposed as water content decreased and some fines were probably winnowed. This implies that till deformation probably accounted for much of the glacier movement. Therefore, rapid ice flow could have occurred over the section, along the southern margin of the Laurentide Ice Sheet.  相似文献   

10.
At the Dänischer Wohld Peninsula coastal sections (North West Germany), subglacial deformation was found at three scales. At the smallest scale, features typical of deforming bed tills were found, i.e. small boudins, tectonic laminations and low fabric strength till. At an intermediate scale, large lenses of glaciolacustrine sediments were found within subglacially deformed till. At the largest scale, there were large (over 5 m high) subglacial folds. We suggest that these styles of sedimentation/deformation were associated with a series of readvances during overall glacial retreat: subglacial deformation occurred during each advance and glaciolacus trine sedimentation occurred during each retreat. This led to glaciolacustrine sediments and deforming bed tills being folded together during subsequent readvances. Where the rheology was relatively weak, the lacustrine sediments were totally incorporated into the diamicton and lost their previous identity. However, where the glaciolacustrine sediments were relatively strong, they survived. We suggest that this style of deformation is typical of the conditions just upglacier from the ice margin and is associated with a relatively thick deforming layer and a high input of subglacial sediment. We conclude that the evidence found at this site provides further indications that the southern margins of the Fenno-Scandinavian ice sheet were coupled with the glacier bed and underwent deforming bed conditions.  相似文献   

11.
The general subject of this paper is subglacial deformation beneath Breiðamerkurjökull, a surging Icelandic glacier. More specifically it discusses the evolution and the role of fluid pressure on the behaviour of subglacial sediments during deformation. During Little Ice Age maximum, the two outcrops studied, North Jökulsarlon (N-Jk) and Brennhola-Alda (BA), were located at 2550 m and 550 m respectively from the front of the Breiðamerkurjökull. Sedimentological analysis at the forefield of the glacier shows thick, coarse glaciofluvial deposits interbedded with thin, fine-grained shallow lacustrine/swamp deposits, overlain by a deformed till unit at N-Jk. BA outcrop shows fine-grained shallow lacustrine/swamp deposits overlain by a deformed till unit. The sequence of deformation events from one outcrop to the other is similar. First, major thrust planes, which were rooted in shallow lacustrine/swamp deposits developed by glacially induced simple shear. Next, the thrusts were folded, indicating the deformation of hydroplastic sediment assisted by moderate fluid pressure. Then clastic dyke swarms crosscut the sedimentary succession, proving that fluid overpressure caused hydrofracturing associated with fluidisation. Finally, as water escaped from the glacier bed, fluid pressure dropped, and normal faulting occurred in brittle-state subglacial sediments. Fluid-pressure variations are related to glacier dynamics. They control the deformation sequence by modifying subglacial rheological behaviour and the nature of the subglacial tectonism.  相似文献   

12.
Hilda Glacier, a small cirque glacier in the Canadian Rocky Mountains, yields two principal types of sediment: ablation till, deficient in fine material and produced by rockfalls and avalanches falling on to the glacier surface, and basal lodgement till, rich in fines and formed mainly by subglacial erosion. Recent recession from its Neoglacial maximum has exposed large areas of basal till with thin veneers of ablation till which, when combined with present subglacial and supraglacial debris, provide abundant material for erosion and transport by the mcltwatcr stream. Sediment transport measurements over two summers (1977–1978) showed that bed load and suspended load occur in approximately equal proportions and that dissolved loads are minor. Local source variations, especially bank slumps, are a major cause of scatter in sediment rating curves. Suspended-sediment concentrations are greater early in the melt season due to availability of loose sediment produced by freezing and thawing. Other contributors to scatter in suspended-sediment rating curves include rain showers and diurnal hysteretic effects. Although the distinction between bed load and suspended load is never sharp, available data suggest that the sand/ gravel grain-size boundary (-1ø) approximates the suspendcd-load/bed-load division for characteristic Hilda flows transporting gravel. This approximation, combined with till grain-size analyses, suspended-sediment measurements, and spatial distributions of till types, leads to the following computations of fluvial sediment sources: for suspended load - 6% supraglacial, 47% subglacial, 47% channel banks; for bed load - 46% supraglacial, 27% each subglacial and channel banks. Supraglacial debris provides only about one-fourth of all fluvial sediment, but nearly half of the bed load.  相似文献   

13.
Burki, V., Hansen, L., Fredin, O., Andersen, T. A., Beylich, A. A., Jaboyedoff, M., Larsen, E. & Tønnesen, J.‐ F. 2009: Little Ice Age advance and retreat sediment budgets for an outlet glacier in western Norway. Boreas, Vol. 39, pp. 551–566. 10.1111/j.1502‐3885.2009.00133.x. ISSN 0300‐9483 Bødalsbreen is an outlet glacier of the Jostedalsbreen Ice Field in western Norway. Nine moraine ridges formed during and after the maximum extent of the Little Ice Age (LIA). The stratigraphy of proglacial sediments in the Bødalen basin inside the LIA moraines is examined, and corresponding sediment volumes are calculated based on georadar surveys and seismic profiling. The total erosion rates (etot) by the glacier are determined for the periods AD 1650–1930 and AD 1930–2005 as 0.8 ± 0.4 mm/yr and 0.7 ± 0.3 mm/yr, respectively. These rates are based on the total amount of sediment delivered to the glacier margin. The values are almost one order of magnitude higher than total erosion rates previously calculated for Norwegian glaciers. This is explained by the large amount of pre‐existing sediment that was recycled by Bødalsbreen. Thus, the total erosion rate must be considered as a composite of eroded bedrock and of removed pre‐existing sediments. The total erosion rate is likely to vary with time owing to a decreasing volume of easily erodible, unconsolidated sediment and till under the glacier. A slight increase in the subglacial bedrock erosion is expected owing to the gradually increasing bedrock surface area exposed to subglacial erosion.  相似文献   

14.
The net effect of ice‐flow shifts resulting in the dilution or reworking of clasts on a single preserved till sheet is often unknown yet has major implications for palaeoglaciology and mineral exploration. Herein, we analyse variations in till clast lithologies from a single till sheet, within palimpsest‐type Glacial Terrain Zones in NE Manitoba, Canada, to better understand sediment–landform relationships in this area of high landform inheritance. This near‐ice‐divide area is known to consist of a highly fragmented subglacial landscape, resulting from spatio‐temporal variations in intensity of reworking and inheritance throughout multiple glacial events (subglacial bed mosaic). We show that a seemingly homogenous ‘Keewatin’ till sheet is composed of local (>15 km) and continental‐scale (～100‐km‐long carbonate train and 350–600 km long Dubawnt red erratic train) fan, irregular (amoeboid) or lobate palimpsest dispersal patterns. Local dispersal is more complex than the preserved local landform flowset(s) record, but appears consistent with the overall glacial history reconstructed from regional flowset and striation analyses. The resultant surface till is a spatial mosaic interpreted to reflect variable intensities in modification (overprinting) and preservation (inheritance) of a predominately pre‐existing till sheet. A multi‐faceted approach integrating till composition, regional landforms, ice‐flow indicators, and stratigraphic knowledge is used to map relative spatio‐temporal erosion/reworking intensity.  相似文献   

15.
A two‐part basal till at Knud Strand, Denmark reveals a uniform fabric pattern and strength, petrographical composition and clay mineralogy. The nature of the contact with the underlying sediments, ductile deformation structures, partly intact soft sediment clasts, small meltwater channels and thin horizontal outwash stringers dispersed in the till indicate both bed deformation and basal decoupling by pressurised subglacial water. A time‐transgressive model is suggested to explain the lack of vertical gradation in till properties in which debris released from the active ice sole is sheared in a thin zone moving upward as till accretion proceeds. It is suggested that, although strain indicators occur throughout the entire till thickness, the deformation at any point of time encompassed the uppermost part of the till only, allowing preservation of fragile clasts below. The substantial thickness of the till (up to 6 m) coupled with a much smaller (by more than one order of magnitude) inferred thickness of the deforming bed suggests that the bulk of till material was transported englacially prior to deposition. The lack of petrographical gradation in the till is attributed to effective mixing and homogenisation of material along the ice flow path. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

16.
Along the south coast of Ireland, a shelly diamict facies, the Irish Sea Till, has been variously ascribed to subglacial deposition by a grounded Irish Sea glacier or to glacimarine sedimentation by suspension settling and iceberg rafting. Observations are presented here from five sites along the south coast to directly address this question. At these sites, sedimentary evidence is preserved for the onshore advance of a grounded Irish Sea glacier, which glacitectonically disturbed and eroded pre‐existing sediments and redeposited them as deformation till. Recession of this Irish Sea glacier resulted in the damming of ice‐marginal lakes in embayments along the south coast, into which glacilacustrine sedimentation then took place. These lake sediments were subsequently glacitectonised and reworked by overriding glacier ice of inland origin, which deposited deformation till on top of the succession. There is no evidence for deposition of the Irish Sea diamicts by glacimarine sedimentation at these sites. The widespread development of subglacial deforming bed conditions reflected the abundance of fine‐grained marine and lacustrine sediments available for subglacial erosion and reworking. Stratigraphical and chronological data suggest that the advance of a grounded Irish Sea glacier along the south coast occurred during the last glaciation, and this is regionally consistent with marine geological data from the Celtic Sea. These observations demonstrate extension of glacier ice far beyond its traditional limits in the Celtic Sea and on‐land in southern Ireland during the last glaciation, and remove the stratigraphical basis for chronological differentiation of surficial glacial drifts, and thus the Munsterian Glaciation, in southern Ireland. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

17.
Sediment from the Attawapiskat area near James Bay, Northern Ontario was sampled for micromorphological analyses. The sediment is a glacial diamicton (till) of subglacial origin. The till contains entrained and scavenged sediments of proglacial and/or subglacial glaciofluvial/glaciolacustrine origin from a subglacial deforming layer that was emplaced due to both stress reduction and/or porewater dissipation. Evidence of porewater escape, clay translocation and other microstructures all point to emplacement under active subglacial bed deformation. The limited number of edge to edge (ee) grain crushing events, however, point to lower stress levels than might anticipated under a thin fast ice lobe of the James Bay during the Middle Pliocene. Microstructures of Pleistocene tills were quantitatively compared with the Attawapiskat till and the limited number of ee events at Attawapiskat further highlighted that grain to grain contact was curtailed possibly due to high till porosity, high porewater pressures and low strain rates or alternatively due to a high clay matrix component reducing grain crushing contact events. It is suggested that this Middle Pliocene till may be indicative of sediments emplaced under ice lobe surging conditions or fast ice stream subglacial environments. This proposal has significant implications for the glaciodynamics of this part of the Middle Pliocene James Bay lobe. This research highlights a crucial link between subglacial conditions, till microstructural analyses and glaciodynamics.  相似文献   

18.
Clast fabric and morphological data have been used to determine the origin of fluted subglacial tills exposed by recent retreat of the Slettmarkbreen glacier, Norway. A new method for the interpretation of clast fabric data allows aspects of the strain and depositional history of the till to be reconstructed. The till formed by a combination of lodgement and subsole deformation by slip along discrete shear planes. Lodgement was dominant for the larger size fractions (>125 mm), while the smaller material was more susceptible to deformation. The fluted till surface reflects the tendency for the till matrix to deform into regions of low confining pressure in the lee of lodged boulders. Downglacier components of till flow are thought to have resulted in significant sediment transfer towards the margin.  相似文献   

19.
  相似文献   

20.
希夏邦马峰东南富曲河谷的冰川沉积和冰川构造   总被引：2，自引：0，他引：2  
在希夏邦马峰（海拔８０１２ｍ）东南富曲河谷，中更新世以来有三次冰期；即聂拉木、富曲和普罗冰期。它们均可再分为两个亚阶段。聂拉木南的高冰碛平台长３.５ｍ，宽１.５ｋｍ，厚２００ｍ。属于中更新世聂拉木冰期（聂聂雄拉冰期）的巨大山谷冰川沉积，中尼公路从高冰碛平台尾端通过，形成数公里长的冰碛剖面，呈现出美丽多姿的冰川成因类型沉积和冰川构造现象，包括冰下，冰上融出碛，冰内.冰下河道沉积，冰湖沉积，坠碛，流磺等。冰川运动时造成的冰川构造，如断层、滑动面-…等也很清楚，代表了海洋型（暖冰川）冰川沉积和冰川构造特征，是中国目前研究冰川构造最理想的场所。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号