共查询到20条相似文献，搜索用时 31 毫秒
1.
The presented scenario of free convection flows in a subduction zone is based on experimental and theoretical simulation. The experimental simulation of free convection flows is carried out under various conditions of heat transfer that occurs between the oceanic and continental limbs of the subduction zone. The experiments show that to provide insights into subduction zones, it is necessary to estimate the horizontal forces acting on the left and right sides of the plunging plate, as well as the resulting horizontal force and its direction. The vector sum of horizontal and gravity forces of the subducting plate determines the slope angle of this plate at different depths. Heat transfer in the subducting plate has been considered. The y min coordinate of the temperature minimum in a plate and the value of minimum temperature have been estimated. The forces that arise due to phase transition and owing to the horizontal temperature gradient along the thickness of the descending lithosphere in the transitional mantle layer C are estimated as well. These forces are directed in opposite direction from the y min coordinate and induce spreading of the subducting lithosphere along the boundary between the upper and lower mantle. Theoretical simulation of the hydrodynamics and heat transfer in combination with experimental simulation of convection flows in a subduction zone indicates that a significant part of the upper mantle material of the plunging plate circulates in the oceanic limb of the subduction zone owing to spreading from the region of minimum temperature along a 670 km boundary. 相似文献
2.
How was Taiwan created? 总被引：4，自引：0，他引：4
Since the beginning of formation of proto-Taiwan during late Miocene (9 Ma), the subducting Philippine (PH) Sea plate moved continuously through time in the N307° direction at a 5.6 cm/year velocity with respect to Eurasia (EU), tearing the Eurasian plate. Strain states within the EU crust are different on each side of the western PH Sea plate boundary (extensional in the Okinawa Trough and northeastern Taiwan versus contractional for the rest of Taiwan Island). The B feature corresponds to the boundary between the continental and oceanic parts of the subducting Eurasian plate and lies in the prolongation of the ocean–continent boundary of the northern South China Sea. Strain rates in the Philippines to northern Taiwan accretionary prism are similar on each side of B (contractional), though with different strain directions, perhaps in relation with the change of nature of the EU slab across B. Consequently, in the process of Taiwan mountain building, the deformation style was probably not changing continuously from the Manila to the Ryukyu subduction zones. The Luzon intra-oceanic arc only formed south of B, above the subducting Eurasian oceanic lithosphere. North of B, the Luzon arc collided with EU simultaneously with the eastward subduction of a portion of EU continental lithosphere beneath the Luzon arc. In its northern portion, the lower part of the Luzon arc was subducting beneath Eurasia while the upper part accreted against the Ryukyu forearc. Among the consequences of such a simple geodynamic model: (i) The notion of continuum from subduction to collision might be questioned. (ii) Traces of the Miocene volcanic arc were never found in the southwestern Ryukyu arc. We suggest that the portion of EU continental lithosphere, which has subducted beneath the Coastal Range, might include the Miocene Ryukyu arc volcanoes formed west of 126°E longitude and which are missing today. (iii) The 150-km-wide oceanic domain located south of B between the Luzon arc and the Manila trench, above the subducting oceanic EU plate (South China Sea) was progressively incorporated into the EU plate north of B. 相似文献
3.
Initiation of Subduction Zones as a Consequence of Lateral Compositional Buoyancy Contrast within the Lithosphere: a Petrological Perspective 总被引：12，自引：1，他引：12
Tonga and Mariana fore-arc peridotites, inferred to representtheir respective sub-arc mantle lithospheres, are compositionallyhighly depleted (low Fe/Mg) and thus physically buoyant relativeto abyssal peridotites representing normal oceanic lithosphere(high Fe/Mg) formed at ocean ridges. The observation that thedepletion of these fore-arc lithospheres is unrelated to, andpre-dates, the inception of present-day western Pacific subductionzones demonstrates the pre-existence of compositional buoyancycontrast at the sites of these subduction zones. These observationsallow us to suggest that lateral compositional buoyancy contrastwithin the oceanic lithosphere creates the favoured and necessarycondition for subduction initiation. Edges of buoyant oceanicplateaux, for example, mark a compositional buoyancy contrastwithin the oceanic lithosphere. These edges under deviatoriccompression (e.g. ridge push) could develop reverse faults withcombined forces in excess of the oceanic lithosphere strength,allowing the dense normal oceanic lithosphere to sink into theasthenosphere beneath the buoyant overriding oceanic plateaux,i.e. the initiation of subduction zones. We term this conceptthe ‘oceanic plateau model’. This model explainsmany other observations and offers testable hypotheses on importantgeodynamic problems on a global scale. These include (1) theorigin of the 43 Ma bend along the Hawaii–Emperor SeamountChain in the Pacific, (2) mechanisms of ophiolite emplacement,(3) continental accretion, etc. Subduction initiation is notunique to oceanic plateaux, but the plateau model well illustratesthe importance of the compositional buoyancy contrast withinthe lithosphere for subduction initiation. Most portions ofpassive continental margins, such as in the Atlantic where largecompositional buoyancy contrast exists, are the loci of futuresubduction zones. KEY WORDS: subduction initiation; compositional buoyancy contrast; oceanic lithosphere; plate tectonics; mantle plumes; hotspots; oceanic plateaux; passive continental margins; continental accretion; mantle peridotites; ophiolites 相似文献
4.
《International Geology Review》2012,54(7):787-803
Slow–ultraslow spreading oceans are mostly floored by mantle peridotites and are typified by rifted continental margins, where subcontinental lithospheric mantle is preserved. Structural and petrologic investigations of the high-pressure (HP) Alpine Voltri Massif ophiolites, which were derived from the Late Jurassic Ligurian Tethys fossil slow–ultraslow spreading ocean, reveal the fate of the oceanic peridotites/serpentinites during subduction to depths involving eclogite-facies conditions, followed by exhumation. The Ligurian Tethys was formed by continental extension within the Europe–Adria lithosphere and consisted of sea-floor exposed mantle peridotites with an uppermost layer of oceanic serpentinites and of subcontinental lithospheric mantle at the rifted continental margins. Plate convergence caused eastward subduction of the oceanic lithosphere of the Europe plate and the uppermost serpentinite layer of the subducting slab formed an antigorite serpentinite-subduction channel. Sectors of the rather unaltered mantle lithosphere of the Adria extended margin underwent ablative subduction and were detached, embedded, and buried to eclogite-facies conditions within the serpentinite-subduction channel. At such P–T conditions, antigorite serpentinites from the oceanic slab underwent partial HP dehydration (antigorite dewatering and growth of new olivine). Water fluxing from partial dehydration of host serpentinites caused partial HP hydration (growth of Ti-clinohumite and antigorite) of the subducted Adria margin peridotites. The serpentinite-subduction channel (future Beigua serpentinites), acting as a low-viscosity carrier for high-density subducted rocks, allowed rapid exhumation of the almost unaltered Adria peridotites (future Erro–Tobbio peridotites) and their emplacement into the Voltri Massif orogenic edifice. Over in the past 35 years, this unique geologic architecture has allowed us to investigate the pristine structural and compositional mantle features of the subcontinental Erro–Tobbio peridotites and to clarify the main steps of the pre-oceanic extensional, tectonic–magmatic history of the Europe–Adria asthenosphere–lithosphere system, which led to the formation of the Ligurian Tethys. Our present knowledge of the Voltri Massif provides fundamental information for enhanced understanding, from a mantle perspective, of formation, subduction, and exhumation of oceanic and marginal lithosphere of slow–ultraslow spreading oceans. 相似文献
5.
Free conductive flows in the asthenosphere, layer C, and subduction zone are considered on the basis of experimental and theoretical simulation. The main forces acting on the oceanic lithospheric plate in the subduction zone are described. The horizontally directed forces arising due to free convection in the asthenosphere and transferring the oceanic lithospheric plate toward subduction zone have been estimated. These are friction force Fa and force of gravitational sliding F rd. Thermogravitational force F tg, which is created because the subducting lithospheric plate has a lower average temperature than the ambient mantle, is estimated. The force created owing to phase transitions in the subducted plate has been estimated as well. The tangential stress at the contact of the subducting plate with the continental lithosphere and underlying upper mantle has been determined. The horizontal force arising due to different lateral temperature gradients in the upper mantle on the left and on the right of the subducting plate has been estimated. The results of experimental modeling of the effect exerted upon subduction by counter free convective flows developing in the asthenosphere are considered. The experiments show that the position of the descending free convective flow and thus of the subduction zone depends on the ratio of the thermal power of astehnospheric countercurrents. The pressure arising near the 670 km boundary gives rise to spreading of the subducting plate over this boundary. 相似文献
6.
The reason for obduction, or tectonic transport of oceanic lithosphere onto continents, is investigated by two‐dimensional thermo‐mechanical numerical modelling based on the geology of the Anatolia–Lesser Caucasus ophiolites. Heating of the oceanic domain and extension induced by far‐field plate kinematics appear to be essential for the obduction of ~80‐Ma‐old oceanic crust over distances exceeding 200 km. Heating of the oceanic lithosphere by mantle upwelling is evidenced by a thick alkaline volcanic series emplaced on top of the oceanic crust 10–20 Ma before obduction, at the onset of Africa–Eurasia convergence. Regional heating reduced the negative buoyancy and strength of the magmatically old lithosphere. Extension facilitated the propagation of obduction by reducing the mantle lithosphere thickness, which led to the exhumation of eclogite‐free continental crust previously underthrusted beneath the ophiolites. This extensional event is ascribed to far‐field plate kinematics resulting from renewed Neotethys oceanic subduction beneath Eurasia. 相似文献
7.
超高压变质岩生成问题中解决低密度大陆地壳深俯冲力学机制是一个关键问题。虽然俯冲地幔岩石可以裹携十几千米乃至几十千米尺度的陆壳块体到超高压变质深度，大规模的陆壳深俯冲需要特殊的构造条件。新西兰南岛北端研究表明，俯冲大洋板块能携带宽度达150km左右的窄条陆壳克服浮力达到超高压变质深度，而大陆板块碰撞的主体则浮在岩石圈上形成走滑断层。苏鲁-大别可能曾存在类似的构造条件：苏鲁西侧俯冲海洋板片首先拖曳苏鲁陆壳俯冲到超高压变质深度；随后大别以西俯冲大洋板片拖曳大别至超高压变质深度，而陆壳浮力导致苏鲁陆壳停止俯冲，飘浮的陆壳被北推而形成郯庐断裂；秦岭陆陆碰撞造山后大别超高压陆壳也折返；秦岭作为典型造山带，虽然不排除零星超高压变质的可能，但不具备大规模超高压变质的条件。 相似文献
8.
In contrast to the normal ‘Wilson cycle’ sequence of subduction leading to continental collision and associated mountain building, the evolution of the New Zealand plate boundary in the Neogene reflects the converse—initially a period of continental convergence that is followed by the emplacement of subduction. Plate reconstructions allow us to place limits on the location and timing of the continental convergence and subduction zones and the migration of the transition between the two plate boundary regimes. Relative plate motions and reconstructions since the Early to Mid-Miocene require significant continental convergence in advance of the emplacement of the southward migrating Hikurangi subduction—a sequence of tectonism seen in the present plate boundary geography of Hikurangi subduction beneath North Island and convergence in the Southern Alps along the Alpine Fault. In contrast to a transition from subduction to continental convergence where the leading edge of the upper plate is relatively thin and deformable, the transition from a continental convergent regime, with its associated crustal and lithospheric thickening, to subduction of oceanic lithosphere requires substantial thinning (removal) of upper plate continental lithosphere to make room for the slab. The simple structure of the Wadati–Benioff zone seen in the present-day geometry of the subducting Pacific plate beneath North Island indicates that this lithospheric adjustment occurs quickly. Associated with this rapid lithospheric thinning is the development of a series of ephemeral basins, younging to the south, that straddle the migrating slab edge. Based on this association between localized vertical tectonics and slab emplacement, the tectonic history of these basins records the effects of lithospheric delamination driven by the southward migrating leading edge of the subducting Pacific slab. Although the New Zealand plate boundary is often described as simply two subduction zones linked by the transpressive Alpine Fault, in actuality the present is merely a snapshot view of an ongoing and complex evolution from convergence to subduction. 相似文献
9.
Spatial gaps in arc volcanism: The effect of collision or subduction of oceanic plateaus 总被引：2，自引：0，他引：2
One of the major processes in the formation and deformation of continental lithosphere is the process of arc volcanism. The plate-tectonic theory predicts that a continuous chain of arc volcanoes lies parallel to any continuous subduction zone. However, the map pattern of active volcanoes shows at least 24 areas where there are major spatial gaps in the volcanic chains (> 200 km). A significant proportion (~ 30%) of oceanic crust is subducted at these gaps. All but three of these gaps coincide with the collision or subduction of a large aseismic plateau or ridge.The idea that the collision of such features may have a major tectonic impact on the arc lithosphere, including cessation of volcanism, is not new. However, it is not clear how the collision or subduction of an oceanic plateau perturbs the system to the extent of inhibiting arc volcanism. Three main factors necessary for arc volcanism are (1) source materials for the volcanics—either volatiles or melt from the subducting slab and/or melt from the overlying asthenospheric wedge, (2) a heat source, either for the dehydration or the melting of the slab, or the melting within the asthenosphere and (3) a favorable state of stress in the overlying lithosphere. The absence of any one of these features may cause a volcanic gap to form.There are several ways in which the collision or subduction of an oceanic plateau may affect arc volcanism. The clearest and most common cases considered are those where the feature completely resists subduction, causing local plate boundaries to reorganize. This includes the formation of new plate-bounding transform faults or a flip in subduction polarity. In these cases, subduction has slowed down or stopped and the lack of source material has created a volcanic gap.There are a few cases, most notably in Peru, Chile, and the Nankai trough, where the dip of subduction is so shallow that effectively no asthenospheric wedge exists to produce source material for volcanism. The shallow dip of the slab may be a buoyant effect of the plateau imbedded in the oceanic lithosphere.The cases which are the most enigmatic are those where subduction is continuous, the oceanic plateau is subducted along with the slab, and the dip of the slab is clearly steep enough to allow arc volcanism; yet a volcanic gap exists. In these areas, the subducted plateau may have a fundamental effect on the physical process of arc volcanism itself. The presence of a large topographic feature on the subducting plate may affect the stress state in the are by increasing the amount of decoupling between the two plates. Alternatively, the subduction of the plateau may change the chemical processes at depth if either the water-rich top of the plateau with accompanying sediments are scraped off during subduction or if the ridge is compositionally different. 相似文献
10.
The evolution of an active continental margin is simulated in two dimensions, using a finite difference thermomechanical code with half-staggered grid and marker-in-cell technique. The effect of mechanical properties, changing as a function of P and T, assigned to different crustal layers and mantle materials in the simple starting structure is discussed for a set of numerical models. For each model, representative P–T paths are displayed for selected markers. Both the intensity of subduction erosion and the size of the frontal accretionary wedge are strongly dependent on the rheology chosen for the overriding continental crust. Tectonically eroded upper and lower continental crust is carried down to form a broad orogenic wedge, intermingling with detached oceanic crust and sediments from the subducted plate and hydrated mantle material from the overriding plate. A small portion of the continental crust and trench sediments is carried further down into a narrow subduction channel, intermingling with oceanic crust and hydrated mantle material, and to some extent extruded to the rear of the orogenic wedge underplating the overriding continental crust. The exhumation rates for (ultra)high pressure rocks can exceed subduction and burial rates by a factor of 1.5–3, when forced return flow in the hanging wall portion of the self-organizing subduction channel is focused. The simulations suggest that a minimum rate of subduction is required for the formation of a subduction channel, because buoyancy forces may outweigh drag forces for slow subduction. For a weak upper continental crust, simulated by a high pore pressure coefficient in the brittle regime, the orogenic wedge and megascale melange reach a mid- to upper-crustal position within 10–20 Myr (after 400–600 km of subduction). For a strong upper crust, a continental lid persists over the entire time span covered by the simulation. The structural pattern is similar in all cases, with four zones from trench toward arc: (a) an accretionary complex of low-grade metamorphic sedimentary material; (b) a wedge of mainly continental crust, with medium-grade HP metamorphic overprint, wound up and stretched in a marble cake fashion to appear as nappes with alternating upper and lower crustal provenance, and minor oceanic or hydrated mantle interleaved material; (c) a megascale melange composed of high-pressure and ultrahigh-pressure metamorphic oceanic and continental crust, and hydrated mantle, all extruded from the subduction channel; (d) zone represents the upward tilted frontal part of the remaining upper plate lid in the case of a weak upper crust. The shape of the P–T paths and the time scales correspond to those typically recorded in orogenic belts. Comparison of the numerical results with the European Alps reveals some similarities in their gross structural and metamorphic pattern exposed after collision. A similar structure may be developed at depth beneath the forearc of the Andes, where the importance of subduction erosion is well documented, and where a strong upper crust forms a stable lid. 相似文献
11.
造山带幔源（M型）橄榄岩虽然在高压/超高压变质带分布不多,但由于其来自俯冲板块上覆的岩石圈地幔,因此是研究俯冲隧道内俯冲板片与地幔楔之间相互作用的重要对象,对于还原超高压变质带的演化有重要意义.柴北缘鱼卡榴辉岩-片麻岩区边部附近的开屏沟存在一套橄榄岩,其岩石类型、成因、时代等都缺乏研究.对开屏沟橄榄岩全岩的主量和微量元素及铂族元素、橄榄石主量元素、锆石U-Pb年龄和Hf同位素进行了研究.结果显示,其全岩具有高的Mg#、Mg/Si和Ni值,同时表现出亏损难溶的HFSE和HREE,轻微富集LILE和LREE中与流体活动性相关的元素;橄榄石具有较高的Fo值（90.11~92.77）与NiO含量（0.32%~0.45%）、低的CaO含量（< 0.02%）;PGEs的球粒陨石标准化配分模式与交代橄榄岩和残留橄榄岩近似;两组变质锆石年龄为459.5±3.6 Ma和417.5±2.7 Ma,对应的εHf（t）值为-0.71~9.45和-11.96~-1.20,分别反映了洋壳流体（或早期大陆俯冲板片流体）和陆壳流体交代的性质和时限.开屏沟橄榄岩来源于俯冲带上覆地幔楔,遭受了不同来源流体不同程度的交代作用而获得地壳特征,同时为柴北缘大洋俯冲到陆陆碰撞的构造演化提供了新证据. 相似文献
12.
Arc–continent collision is a key process of continental growth through accretion of newly grown magmatic arc crust to older continental margin. We present 2D petrological–thermo-mechanical models of arc–continent collision and investigate geodynamic regimes of this process. The model includes spontaneous slab bending, dehydration of subducted crust, aqueous fluid transport, partial melting of the crustal and mantle rocks and magmatic crustal growth stemming from melt extraction processes. Results point to two end-member types of subsequent arc–continent collisional orogens: (I) orogens with remnants of accretion prism, detached fragments of the overriding plate and magmatic rocks formed from molten subducted sediments; and (II) orogens mainly consisting of the closed back-arc basin suture, detached fragments of the overriding plate with leftovers of the accretion prism and quasi insignificant amount of sediment-derived magmatic rocks. Transitional orogens between these two endmembers include both the suture of the collapsed back-arc basin and variable amounts of magmatic production. The orogenic variability mainly reflects the age of the subducting oceanic plate. Older, therefore colder and denser oceanic plates trigger subduction retreat, which in turn triggers necking of the overriding plate and opening of a backarc basin in which new oceanic lithosphere is formed from voluminous decompression melting of the rising hot asthenosphere. In this case, subducted sediments are not heated enough to melt and generate magmatic plumes. On the other hand, young and less dense slabs do not retreat, which hampers opening of a backarc basin in the overriding plate while subducted sediments may reach their melting temperature and develop trans-lithospheric plumes. We have also investigated the influences of convergence rate and volcanic/plutonic rocks' ratio in newly forming lithosphere. The predicted gross-scale orogenic structures find similarities with some natural orogens, in particular with deeply eroded orogens such as the Variscides in the Bohemian Massif. 相似文献
13.
对弧后扩张作用的探讨 总被引：5，自引：0，他引：5
俯冲之后的大洋板块继续向陆运动,导致大陆地壳和上地幔内部各圈层在深部发生多层次的水平剪切,引起弧后宽达几千公里地区的裂陷扩张,并形成盆地。其形成的盆地平行于俯冲带。弧后扩张作用的强度和存在与否,取决于仰、俯冲板块双方运动速度矢量的组合类型。离散型产生扩张,聚敛型则以挤压为主。 相似文献
14.
五十年前板块构造理论的诞生是地球科学领域的一场革命,它为理解地球如何运作构建了基本框架。过去五十年对该理论的进一步研究告诉我们地质过程最终都是地球热损失的结果。例如,大洋岩石圈板块在洋中脊形成,其运动和增生以及最终通过俯冲带进入地幔导致地幔冷却降温,从而导致大规模的地幔对流。亦即,板块构造的直接驱动力是俯冲大洋岩石圈板块的下沉力。因此,没有俯冲带就没有板块构造,但是俯冲带如何开始仍然有争议。对俯冲起始的研究从未中断,有数值模拟也有地质推断。2014年在西太平洋用三个IODP航次(350、351和352)来检验“自发”和“诱发”俯冲开始的想法。所有这些努力都值得肯定,但这些是无法检验的想法。无法检验意味着没有结果。本文介绍至今唯一可用地质学方法检验的假说,亦即“岩石圈内横向物质组成差异导致的浮力差是俯冲带形成的起因”。这种浮力差位于海底高原的边部和被动大陆边缘,因此这些部位是未来俯冲带起始的必然轨迹。在远离这些部位的正常洋盆内因缺乏浮力差而俯冲带不可能起始。换句话说,“所有岛弧一定有大陆(或海底高原)基底”,这可以通过采集和研究岛弧基底岩石来验证。 相似文献
15.
The Indian subcontinent has been colliding against Asia along the Himalayas. Hindu Kush and Burma in this collision zone have intermediate-depth seismicities beneath them, with most of the continental crust subducted into a few hundred km depth. The subduction, not collision, in these regions is an enigma long time. We show that the continental lithosphere subducted beneath Hindu Kush and Burma traveled over the Reunion and Kerguelen hotspots from 100 Ma to 126 Ma and is likely to have been metasomatized by upwelling plumes beneath those hotspots. The devolatilization of the metasomatized lithosphere impinging on the collision boundary would have provided a high pore fluid pressure ratio at the thrust zones and made the subduction of the continental lithosphere in these regions possible. The subducted lithosphere could give intermediate-depth seismicities by devolatilization embrittlement. Such subduction of hotspot-affected lithosphere without accompanying any oceanic plate would be one candidate for producing ultrahigh-pressure metamorphic rocks by deep subduction of the continental crust. 相似文献
16.
At continental subduction initiation, the continental crust buoyancy may induce, first, a convergence slowdown, and second, a compressive stress increase that could lead to the forearc lithosphere rupture. Both processes could influence the slab surface P–T conditions, favoring on one side crust partial melting or on the opposite the formation of ultra-high pressure/low temperature (UHP-LT) mineral. We quantify these two effects by performing numerical simulations of subduction. Water transfers are computed as a function of slab dehydration/overlying mantle hydration reactions, and a strength decrease is imposed for hydrated mantle rocks. The model starts with an old oceanic plate ( 100 Ma) subducting for 145.5 Myr with a 5 cm/yr convergence rate. The arc lithosphere is thermally thinned between 100 km and 310 km away from the trench, due to small-scale convection occuring in the water-saturated mantle wedge. We test the influence of convergence slowdown by carrying on subduction with a decreased convergence rate (≤ 2 cm/yr). Surprisingly, the subduction slowdown yields not only a strong slab warming at great depth (> 80 km), but also a significant cooling of the forearc lithosphere at shallower depth. The convergence slowdown increases the subducted crust temperature at 90 km depth to 705 ± 62 °C, depending on the convergence rate reduction, and might thus favor the oceanic crust partial melting in presence of water. For subduction velocities ≤ 1 cm/yr, slab breakoff is triggered 20–32 Myr after slowdown onset, due to a drastic slab thermal weakening in the vicinity of the interplate plane base. At last, the rupture of the weakened forearc is simulated by imposing in the thinnest part of the overlying lithosphere a dipping weakness plane. For convergence with rates ≥ 1 cm/yr, the thinned forearc first shortens, then starts subducting along the slab surface. The forearc lithosphere subduction stops the slab surface warming by hot asthenosphere corner flow, and decreases in a first stage the slab surface temperature to 630 ± 20 °C at 80 km depth, in agreement with P–T range inferred from natural records of UHP-LT metamorphism. The subducted crust temperature is further reduced to 405 ± 10 °C for the crust directly buried below the subducting forearc. Such a cold thermal state at great depth has never been sampled in collision zones, suggesting that forearc subduction might not be always required to explain UHP-LT metamorphsim. 相似文献
17.
On the role of subducting oceanic plateaus in the development of shallow flat subduction 总被引：2，自引：0，他引：2
Oceanic plateaus, aseismic ridges or seamount chains all have a thickened crust and their subduction has been proposed as a possible mechanism to explain the occurrence of flat subduction and related absence of arc magmatism below Peru, Central Chile and at the Nankai Trough (Japan). Their extra compositional buoyancy could prohibit the slab from sinking into the mantle. With a numerical thermochemical convection model, we simulated the subduction of an oceanic lithosphere that contains an oceanic crustal plateau of 18-km thickness. With a systematic variation, we examined the required physical parameters to obtain shallow flat subduction. Metastability of the basaltic crust in the eclogite stability field is of crucial importance for the slab to remain buoyant throughout the subduction process. In a 44-Ma-old subducting plate, basalt must be able to survive a temperature of 600–700 °C to keep the plate buoyant sufficiently long to cause a flat-slab segment. We found that the maximum yield stress in the slab must be limited to about 600 MPa to allow for the necessary bending to the horizontal. Young slabs show flat subduction for larger parameter ranges than old slabs, since they are less gravitationally unstable and show less resistance against bending. Hydrous weakening of the mantle wedge area and lowermost continent are required to allow for the necessary deformation of a change in subduction style from steep to flat. The maximum flat slab extent is about 300 km, which is sufficient to explain the observed shallow flat subduction near the Nankai Trough (Japan). However, additional mechanisms, such as active overthrusting by an overriding continental plate, need to be invoked to explain the flat-slab segments up to 500 km long below Peru and Central Chile. 相似文献
18.
本篇讨论大陆岩石圈拆沉、伸展与裂解作用过程。由于大陆岩石圈厚度大而且很不均匀,产生裂谷的机制比较复杂。大陆碰撞远程效应的触发,岩石圈拆沉,以及板块运动的不规则性和地球应力场方向转折,都可能产生岩石圈断裂和大陆裂谷。岩石圈拆沉为在重力作用下"去陆根"的作用过程,演化过程可分为大陆根拆离、地壳伸展和岩石圈地幔整体破裂三个阶段。大陆碰撞带、俯冲的大陆和大洋板块、克拉通区域岩石圈,都可能产生岩石圈拆沉。大陆岩石圈调查表明,拉张区可见地壳伸展、岩石圈拆离、软流圈上拱和热沉降;它们是大陆岩石圈伸展与裂解早期的主要表现。从初始拉张的盆岭省到成熟的张裂省,拆离后地壳伸展成复式地堑,下地壳幔源玄武岩浆侵位,断裂带贯通并切穿整个岩石圈,表明地壳伸展进入成熟阶段。中国东北松辽盆地和西欧北海盆地曾处于成熟的张裂省。岩石圈破裂为岩浆侵位提供了阻力很小的通道网。岩浆侵位作用伴随岩石圈破裂和热流体上涌,成熟的张裂省可发展成大陆裂谷。多数的大陆裂谷带并没有发展成威尔逊裂谷带和洋中脊,普通的大陆裂谷要演化为威尔逊裂谷带,必须有来自软流圈的长期和持续的热流和玄武质岩浆的供应。威尔逊裂谷带岩石圈地幔和软流圈为地震低速带,其根源可能与来自地幔底部的地幔热羽流有关。 相似文献
19.
The structural coupling is a common geological phenomenon. The structural differences between eastern and western active continental margins of modern Pacific and between paleo-Pacific and modern-Pacific continental margins are related to the characteristics and status of the subducting oceanic plate, namely, 1. subducting angle; 2. change in subducting angle; 3. subducting velocity; 4. change in subducting velocity; 5. subduction depth; 6. horizontal distance between the leading edge of the subducting plate and the trench; 7. the structural form of the subducting plate at the 670kin boundary between the upper and lower mantle; 8. the displacement and the direction of displacement of subducting plate. The control and influence toward the shallow-level structures by the deep-level structural activities is a detailed representation of the structural coupling on active continental margin. The basin-maintain coupling phenomenon is an intracontinental structural coupling. The far field effect of collision be 相似文献
20.
位于青藏高原南部的冈底斯岩浆弧形成于中生代新特提斯大洋岩石圈的长期俯冲过程中,而且在印度与亚洲大陆碰撞过程中叠加了强烈的新生代岩浆作用,是世界上典型的复合型大陆岩浆弧,已经成为研究汇聚板块边缘岩浆作用和大陆地壳生长与再造的天然实验室。基于对现有研究成果的总结,我们将冈底斯岩浆弧的岩浆构造演化划分为5个阶段：第1阶段发生在晚白垩世之前,以新特提斯洋岩石圈长期正常俯冲和钙碱性弧岩浆岩的发育为特征;第2阶段发生在晚白垩世时期,以活动的新特提斯洋中脊发生俯冲和强烈的岩浆作用与显著的新生地壳生长为特征;第3阶段发生在晚白垩世晚期,以残余的新特提斯大洋岩石圈俯冲和正常弧型岩浆作用为特征;第4阶段发生在古新世至中始新世,以印度与亚洲大陆碰撞、俯冲的新特提斯洋岩石圈回转和断离,及其诱发的幔源岩浆作用、新生和古老地壳的强烈再造为特征;第5阶段为发生在晚渐新世到中中新世的后碰撞阶段,深俯冲印度岩石圈的回转和断离,或加厚岩石圈地幔的对流移去导致了加厚下地壳的部分熔融和埃达克质岩石的广泛发育,同时伴随幔源钾质超钾质岩浆作用。冈底斯弧岩浆作用与岩浆成分的系统时空变化很好地记录了从新特提斯洋俯冲到印度亚洲大陆碰撞的完整构造演化过程。 相似文献