首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 169 毫秒
1.
Relocation of intermediate and deep earthquakes of Tyrrhenian Sea area through joint hypocenter determination for the period 1962–1979, has allowed a more detailed definition of the geometry of this peculiar Benioff zone. Earthquakes dip along a quasi-vertical plane to 250 km depth; there is a 50° dip in the 250–340 km depth range, and a low dip angle to 480 km depth. The structure sketched from the hypocenters is almost continuous, but most energy has been released in the 230–340 km depth interval. An evaluation of fault plane solutions of intermediate earthquakes in this area indicates predominance of down-dip compressions in the central part of the slab. At the border, strike-slip motion occurs independent of depth. Some earthquakes that occurred at intermediate depth (less than 100 km) along the Ionian margin of Calabria show predominance of reverse faulting, with the P-axis oriented SE-NW. However, shallow earthquakes in the Calabria-Sicily region indicate a more complex motion, with predominance of normal faulting. A possible interpretation of these features according to the available geological history, which involves subduction of continental lithosphere, is discussed.  相似文献   

2.
Thirty nine focal mechanisms for shallow, intermediate and deep earthquakes that occurred during the period 1964–1967 in the Indonesian Region have been studied from the first initial motion of the P or PKP waves.The position of the two nodal planes, maximum-pressure axis and maximumtension axis are presented in this paper. The correlation between the state of the pressure distributions and earthquake generating stress systems that produce shallow, intermediate and deep earthquakes are also presented. There is some systematic agreement between the results of the same study already given by others and which is presented in this paper.The dominant modes of deformation are reverse or thrust fault and normal fault rather than strike-slip faulting.  相似文献   

3.
A cross-section of earthquakes located in northeastern Japan is presented by using pPdepths reported by the International Seismological Centre. Travel-time corrections for the water layer were used to recompute pP-depths of earthquakes located below the sea regions. Seven new focal-mechanism solutions, based on teleseismic and Japanese data, were determined for this region. The reconstructed cross-section shows a double seismic zone at intermediate depths of 80–150 km. Earthquakes located within the upper seismic plane are characterized by down-dip compression while those in the lower plane, located about 35 km below the other seismic plane, are characterized by down-dip extension. These observations suggest that, at these depths, stresses attributable to a simple “unbending” of a plate may contribute to the generation of earthquakes in addition to stresses generated by the gravitational sinking of the lithosphere. A detailed cross-section of shallow earthquakes in the same area between the trench and eastern coast of northeastern Honshu is presented along with focal-mechanism solutions. This cross-section delineates more clearly the seismic zones characterized by normal and low-angle thrust faulting.  相似文献   

4.
Accurately determined focal coordinates of earthquakes which occurred in the Hellenic arc between 1964 and 1979 have been used to check the suggestion made ten years ago for a Benioff zone in the Hellenic arc. These recent data leave no doubt that the foci of the intermediate focal depth earthquakes in the Hellenic arc form a well-developed Benioff zone of amphitheatrical shape which dips from the convex (eastern Mediterranean) to the concave (Aegean) part of the arc.

Evidence, based on the time distribution of the intermediate focal depth earthquakes in the Hellenic arc during the last two centuries, indicates that this deep seismic activity follows a periodic pattern. Quiescence periods of the order of six decades are followed by very active periods of about two decades. If this periodicity, which seems to be compatible with recent ideas on the deep tectonics of the area, is true, a new period of high-rate intermediate focal depth activity is expected to break in about twenty five years.  相似文献   


5.
In Italy, the horizontal stress directions are well constrained in many regions, but the tectonic regime is not well known because the stress magnitudes are unknown. Our intention is to improve the knowledge of crustal stress in Italy, both at shallow depth and in low seismicity areas. Therefore, we inferred the tectonic regime from the comparison between the depth of breakout occurrence and the physical properties of the rocks in 20 boreholes. The critical value of the maximum horizontal stress, for which the effective tangential stress at the borehole wall overcomes the rock strength to form breakouts, could be computed from rock strength and density. Comparing the theoretical stress distributions for different tectonic regimes with the depth distribution of breakout occurrence, it is possible to infer the tectonic regime that fits best to the breakout depth distribution. We investigated boreholes up to 6 km deep located in different tectonic environments over the Italian peninsula: the Po Plain, the Apenninic chain, the Adriatic foredeep and the Tyrrhenian Quaternary volcanic region. These wells are characterised by breakout data of good quality (A, B and C, according to World Stress Map quality ranking system). The results are in general agreement with the style of faulting derived from earthquake focal mechanisms and other stress indicators. Our results show a predominance of a normal faulting (NF) regime in the inner Apennines and both normal faulting and strike–slip faulting (SS) style in the surrounding regions, possibly also associated with changes in the tectonic regime with depth.  相似文献   

6.
Relocation of well observed, intermediate depth earthquakes in the Fiordland region by the method of joint hypocentre determination has revealed some fine structure in the Benioff zone. The earthquakes occur in three groups. The central group is the largest and occupies a planar volume less than 15 km thick striking N40°E and dipping at 80°. The deepest events in the region, at depths of 150 km, occur at the northeast end of this group. The two smaller groups lie to the northeast and to the south of the main group. The focal mechanism of the majority of the main group is that of thrust faulting. We suggest that the main group lies within a section of Indian plate lithosphere which has been broken off and rotated into its observed position and that the northern edge of the unbroken subducted Indian plate is indicated by the southern group. We suggest that the small northeastern group has quite a different tectonic origin and is similar to a group of earthquakes further north which are at a similar distance from, and presumably related to, the Alpine Fault.Use has also been made of the travel-time information which is a by-product of the joint hypocentre method to construct upper mantle velocity models for P and S waves in the South Island. The features of this model are a high-velocity region in the vicinity of the Benioff zone, and a subcrustal zone of high seismic velocities running east-west across the center of the South Island in an otherwise normal mantle.  相似文献   

7.
We summarize seismogenic structures in four regions of active convergence, each at a different stage of the collision process, with particular emphases on unusual, deep-seated seismogenic zones that were recently discovered. Along the eastern Hellenic arc near Crete, an additional seismogenic zone seems to occur below the seismogenic portion of the interplate thrust zone—a configuration found in several other oblique subduction zones that terminate laterally against collision belts. The unusual earthquakes show lateral compression, probably reflecting convergence between the subducting lithosphere's flank and the collision zone nearby. Along oblique zones of recent collision, the equivalence between space and time reveals the transition from subduction to full collision. In particular, intense seismicity beneath western Taiwan indicates that along the incipient zone of arc–continent collision, major earthquakes occur along high-angle reverse faults that reach deep into the crust or even the uppermost mantle. The seismogenic structures are likely to be reactivated normal faults on the passive continental margin of southeastern China. Since high-angle faults are ineffective in accommodating horizontal motion, it is not surprising that in the developed portion of the central Taiwan orogen (<5 Ma), seismogenic faulting occurs mainly along moderate-dipping (20–30°) thrusts. This is probably the only well-documented case of concurrent earthquake faulting on two major thrust faults, with the second seismogenic zone reaching down to depths of 30 km. Furthermore, the dual thrusts are out-of-sequence, being active in the hinterland of the deformation front. Along the mature Himalayan collision zone, where collision initiated about 50 Ma ago, current data are insufficient to distinguish whether most earthquakes occurred along multiple, out-of-sequence thrusts or along a major ramp thrust. Intriguingly, a very active seismic zone, including a large (Mw=6.7) earthquake in 1988, occurs at depths near 50 km beneath the foreland. Such a configuration may indicate the onset of a crustal nappe, involving the entire cratonic crust. In all cases of collision discussed here, the basal decollement, a key feature in the critical taper model of mountain building, appears to be aseismic. It seems that right at the onset of collision, earthquakes reflect reactivation of high-angle faults. For mature collision belts, earthquake faulting on moderate-dipping thrust accommodates a significant portion of convergence—a process involving the bulk of crust and possibly the uppermost mantle.  相似文献   

8.
The Betic-Rif Cordilleras, formed by the interaction of NW–SE convergence between the Eurasian and African plates and the westward motion of their Internal Zones, provide a good example of an active tectonic arc. The Campo de Dalías and Campo de Níjar constitute outcropping sectors of Neogene and Quaternary rocks located in the southeastern border of the Betic Cordilleras and allow us to study the recent deformations developed in the internal border of this tectonic arc.The main active faults with related seismicity, representing a moderate seismic hazard, associated to the southeastern Betic Cordilleras boundary, include high-angle NW–SE-oriented normal faults that affect, at least, the upper part of the crust, a main detachment located at 10 km depth, and probably another detachment at 20 km as well. Seismite structures, recent fault scarps with associated colluvial wedges that deform the drainage network and the alignment of the coastline, indicate that the high-angle faults have been active at least since the Quaternary.Paleostresses determined from microfault analysis in Quaternary deposits generally show an ENE–WSW trend of extension. Present-day earthquake focal mechanisms include normal, strike-slip and reverse faulting. Normal and strike-slip focal mechanisms generally indicate ENE–WSW extension, and strike-slip and reverse focal mechanisms are related to NNW–SSE compression.The maximum horizontal compression has a consistently NNW–SSE trend. The deep activity of detachments and reverse faults determines the NNW–SSE crustal shortening related to the Eurasian–African plate convergence. At surface, however, the predominance of normal faults is probably produced by the increase in the relative weight of the vertical stress axis, which in turn may be related to relief uplift and subsequent horizontal spreading. The internal mountain front boundary of the Betic Cordilleras developed through the activity of a set of structures that is more complex than a typical external mountain front, probably as a consequence of a vertical variable stress field that acted on previously deformed rocks belonging to the Internal Zone of the cordilleras.  相似文献   

9.
The direction of convergence between the Rivera and North American plates becomes progressively more oblique (in a counter-clockwise sense as measured relative to the trench-normal direction) northwestward along the Jalisco subduction zone. By analogy to other subduction zones, the forces resulting from this distribution of convergence directions are expected to produce a NW moving, fore-arc sliver and a NW–SE stretching of the fore-arc area. Also, a series of roughly arc parallel strike-slip faults may form in the fore-arc area, both onshore and offshore, as is observed in the Aleutian arc.In the Jalisco subduction zone, the Jalisco block has been proposed to represent such a fore-arc sliver. However, this proposal has encountered one major problem. Namely, right-lateral strike-slip faulting within the fore-arc sliver, and between the fore-arc sliver and the North American plate, should be observed. However, evidence for the expected right-lateral strike-slip faulting is sparse. Some evidence for right-lateral strike-slip faulting along the Jalisco block–North American plate boundary (the Tepic–Zacoalco rift system) has been reported, although some disagreement exists. Right-lateral strike-slip faulting has also been reported within the interior of the Jalisco block and in the southern Colima rift, which forms the SE boundary of the Jalisco block.Threefold, multi-channel seismic reflection data were collected in the offshore area of the Jalisco subduction zone off Manzanillo in April 2002 during the FAMEX campaign of the N/O L'Atalante. These data provide additional evidence for recent strike-slip motion within the fore-arc region of the Jalisco subduction zone. This faulting offsets right-laterally a prominent horst block within the southern Colima rift, from which we conclude that the sense of motion along the faulting is dextral. These data also provide additional evidence for recent subsidence within the area offshore of Manzanillo, as has been proposed.  相似文献   

10.
Denghai Bai  Maxwell A. Meju   《Tectonophysics》2003,364(3-4):135-146
Magnetotelluric (MT) geophysical profiling has been applied to the determination of the deep structure of the Longling–Ruili fault (LRF), part of a convergent strike-slip fault system, underneath thick Caenozoic cover in Ruili basin in southwestern Yunnan, China. The recorded MT data have been inverted using a two-dimensional (2-D) nonlinear conjugate gradients scheme with a variety of smooth starting models, and the resulting models show common subsurface conductivity structures that are deemed geological significant. The models show the presence of a conductive (5–60 Ω m) cover sequence that is thickest (1–1.5 km) in the centre of the basin and rapidly pinches out towards the margins. A half-graben structure is interpreted for the Ruili basin. This is underlain by about 7–10 km thick upper crustal layer of high resistivity (>200–4000 Ω m) that is dissected by steep faults, which we interpret to flatten at depth and root into an underlying mid-crustal conductive layer at about 10 km depth. The mid-crustal layer does not appear to have been severely affected by faulting; we interpret it as a zone of partial melt or intracrustal detachment. The MT models suggest SE directed thrusting of basement rocks in the area. The Longling–Ruili fault is interpreted as a NW-dipping feature bounding one of the identified upper crustal fragments underneath Ruili city. We suggest that MT imaging is a potent tool for deep subsurface mapping in this terrain.  相似文献   

11.
郯庐断裂带的形成与演化：综述   总被引：81，自引：0，他引：81  
万天丰  朱鸿 《现代地质》1996,10(2):159-168
从历史的与整体的观点出发，综合了地质、地貌、地球化学与地球物理的资料，系统地研究了郯庐断裂带各阶段的形态学、运动学以及动力学机制。认为此断裂带开始形成于中、晚三叠世，其长度小于１５００ｋｍ，切割深度小于１５～２０ｋｍ，此时最大左行走滑断距为４３０ｋｍ左右。侏罗纪（２０８～１３５Ｍａ）与中始新世－渐新世（５２～２３．３Ｍａ），此断裂带表现为逆断层活动，断层面受挤压较紧闭。白垩纪－早始新世（１３５～５２Ｍａ），郯庐断裂呈现为略带右行走滑的正断层（走滑断距不超过１００ｋｍ），郯庐断裂带与其北部切割深度约为３０～４０ｋｍ。中新世－更新世（２３．３～０．７３Ｍａ）断裂带表现为带有左行走滑的正断层，走滑断距约５０ｋｍ，断裂带切割深度在５０～８０ｋｍ之间。中更新世（０．７３Ｍａ以来）断裂带又变成略带右行走滑的逆断层，走滑断距不足１００ｍ。由于断裂带形成以来的剥蚀深度不大，地表的断层岩都是碎裂岩与断层泥。沿此断裂带在早白垩世构成了中国东部重要的内生金属成矿带。  相似文献   

12.
A 12-station temporary microearthquake network was established by the Geological Survey of India for aftershock monitoring of the January 26th, 2001 Bhuj earthquake (M w 7.6) in the Kutch district of Gujarat state, western India. The epicentres of the aftershocks show two major trends: one in the NE direction and the other in the NW direction. Fault-plane solutions of the best-located and selected cluster of events that occurred along the NE trend, at a depth of 15–38 km, show reverse faulting with a large left-lateral strike-slip motion, which are comparable with the main-shock solution. The NW trending upper crustal aftershocks at depth <10 km, on the other hand, show reverse faulting with right-lateral strike-slip motion, and the mid crustal and lower crustal aftershocks, at a depth of 15–38 km, show pure reverse faulting as well as reverse faulting with right-lateral and left-lateral strike-slip motions; these solutions are not comparable with the main-shock solution. It is inferred that the intersection of two faults has been the source area for stress concentration to generate the main shock and the aftershocks.  相似文献   

13.
The ground motion hazard for Sumatra and the Malaysian peninsula is calculated in a probabilistic framework, using procedures developed for the US National Seismic Hazard Maps. We constructed regional earthquake source models and used standard published and modified attenuation equations to calculate peak ground acceleration at 2% and 10% probability of exceedance in 50 years for rock site conditions. We developed or modified earthquake catalogs and declustered these catalogs to include only independent earthquakes. The resulting catalogs were used to define four source zones that characterize earthquakes in four tectonic environments: subduction zone interface earthquakes, subduction zone deep intraslab earthquakes, strike-slip transform earthquakes, and intraplate earthquakes. The recurrence rates and sizes of historical earthquakes on known faults and across zones were also determined from this modified catalog. In addition to the source zones, our seismic source model considers two major faults that are known historically to generate large earthquakes: the Sumatran subduction zone and the Sumatran transform fault. Several published studies were used to describe earthquakes along these faults during historical and pre-historical time, as well as to identify segmentation models of faults. Peak horizontal ground accelerations were calculated using ground motion prediction relations that were developed from seismic data obtained from the crustal interplate environment, crustal intraplate environment, along the subduction zone interface, and from deep intraslab earthquakes. Most of these relations, however, have not been developed for large distances that are needed for calculating the hazard across the Malaysian peninsula, and none were developed for earthquake ground motions generated in an interplate tectonic environment that are propagated into an intraplate tectonic environment. For the interplate and intraplate crustal earthquakes, we have applied ground-motion prediction relations that are consistent with California (interplate) and India (intraplate) strong motion data that we collected for distances beyond 200 km. For the subduction zone equations, we recognized that the published relationships at large distances were not consistent with global earthquake data that we collected and modified the relations to be compatible with the global subduction zone ground motions. In this analysis, we have used alternative source and attenuation models and weighted them to account for our uncertainty in which model is most appropriate for Sumatra or for the Malaysian peninsula. The resulting peak horizontal ground accelerations for 2% probability of exceedance in 50 years range from over 100% g to about 10% g across Sumatra and generally less than 20% g across most of the Malaysian peninsula. The ground motions at 10% probability of exceedance in 50 years are typically about 60% of the ground motions derived for a hazard level at 2% probability of exceedance in 50 years. The largest contributors to hazard are from the Sumatran faults.  相似文献   

14.
The integrated analysis of geological, seismological and field observations with lineament data derived from satellite images allows the identification of a possible seismogenic fault zone for an earthquake which occurred near Etne in southwestern Norway, on 29 February 1989. The hypocentre of the earthquake was located at the mid-crust at a depth of 13.8±0.9 km which is typical of small intraplate earthquakes. The Etne earthquake occurred as a result of normal faulting with a dextral strike-slip component on a NW–SE trending fault. Available geological and lineament data indicate correlation of the inferred seismogenic fault with the NW–SE trending Etne fault zone. An aeromagnetic anomaly related to the Etne fault zone forms a regional feature intersecting both Precambrian basement and allochthonous Caledonian rocks. Based on these associations the occurrence of the Etne event is ascribed to the reactivation of a zone of weakness along the Etne fault zone. Slope-instabilities developed in the superficial deposits during the Etne event demonstrate the existence of potentially hazardous secondary-effects of such earthquakes even in low seismicity areas such as southwestern Norway.  相似文献   

15.
高祥林 《地质科学》2006,41(2):355-364
渤海中部的郯庐断裂带在平面上表现为不连续的几条北北东走向断层,地震反射剖面和钻探资料显示断层两侧沉积厚度的巨大差异,表明新近纪以来它们是在沉降运动背景下活动的具有大幅度倾滑位移的正断层,构成渤海盆地内凹陷与凸起的边界。这些断层在剖面上有一定弯曲和倾斜,向下延伸深度不超过10~12km。在此深度以上的地壳浅部,没有水平方向位移以及其它直接变形证据表明郯庐断裂带有走滑运动分量。从地震机制解得到的走滑断层运动反映渤海地区地壳深部的变形及相应的构造应力状态,与浅部残留的伸展构造应力同时存在。根据断裂力学分析,认为中新世末以来渤海浅层新近系内出现的大量近东西向小断裂可能是现代构造应力场作用的结果,与郯庐断裂带或其它基底老断裂没有继承性或派生的成因关系。  相似文献   

16.
The present kinematic and dynamic analysis of large-scale strike-slip faults, which enabled the formation of a collage of Altai terranes as a result of two collisional events. The Late Devonian–Early Carboniferous collision of the Gondwana-derived Altai-Mongolian terrane and the Siberian continent resulted in the formation of the Charysh–Terekta system of dextral strike-slip faults and later the Kurai and Kuznetsk–Teletsk–Bashkauss sinistral strike-slip faults. The Late Carboniferous–Permian collision of the Siberian and Kazakhstan continents resulted in the formation of the Chara, Irtysh and North-East sinistral strike-slip zones. The age of deformation of both collisional events becomes younger toward the inner areas of the Siberian continent. In the same direction the amount of displacement of strike-slip faulting decreases from several thousand to several hundred kilometers. The width of the Late Paleozoic zone of deformation reaches 1500 km. These events deformed the accretion-collision continental margins and their primary paleogeographic pattern.  相似文献   

17.
Earthquake hypocenters and travel time residuals have been analysed to constrain the geometry and physical state of the subducted Indian plate in the Indo-Burmese convergence zone. A critical analysis of earthquake hypocenters reveals the existence of a non-uniform Benioff zone, progressively shortening from north to south. The deepest level of seismicity is observed beneath the Naga hills (160 km) followed by that under the Chin hills (120 km) and Arakan-Yoma ranges (80 km). The region seems to be devoid of moderate sized shallow (< 40 km) earthquakes. Differential travel time residuals from pairs of shallow and intermediate depth earthquakes recorded at teleseismic distances show significantly faster travel time (up to l.2s) in the north-northeast and south-southwest azimuths, whilst slower arrivals (1.2 to 1.5 s) are recorded in the transverse direction. This observation points to the presence of a high velocity slab possibly linked to the subduction of the Indian oceanic lithosphere.  相似文献   

18.
The Japan Trench subduction zone, located east of NE Japan, has regional variation in seismicity. Many large earthquakes occurred in the northern part of Japan Trench, but few in the southern part. Off Miyagi region is in the middle of the Japan Trench, where the large earthquakes (M > 7) with thrust mechanisms have occurred at an interval of about 40 years in two parts: inner trench slope and near land. A seismic experiment using 36 ocean bottom seismographs (OBS) and a 12,000 cu. in. airgun array was conducted to determine a detailed, 2D velocity structure in the forearc region off Miyagi. The depth to the Moho is 21 km, at 115 km from the trench axis, and becomes progressively deeper landward. The P-wave velocity of the mantle wedge is 7.9–8.1 km/s, which is typical velocity for uppermost mantle without large serpentinization. The dip angle of oceanic crust is increased from 5–6° near the trench axis to 23° 150 km landward from the trench axis. The P-wave velocity of the oceanic uppermost mantle is as small as 7.7 km/s. This low-velocity oceanic mantle seems to be caused by not a lateral anisotropy but some subduction process. By comparison with the seismicity off Miyagi, the subduction zone can be divided into four parts: 1) Seaward of the trench axis, the seismicity is low and normal fault-type earthquakes occur associated with the destruction of oceanic lithosphere. 2) Beneath the deformed zone landward of the trench axis, the plate boundary is characterized as a stable sliding fault plain. In case of earthquakes, this zone may be tsunamigenic. 3) Below forearc crust where P-wave velocity is almost 6 km/s and larger: this zone is the seismogenic zone below inner trench slope, which is a plate boundary between the forearc and oceanic crusts. 4) Below mantle wedge: the rupture zones of thrust large earthquakes near land (e.g. 1978 off Miyagi earthquake) are located beneath the mantle wedge. The depth of the rupture zones is 30–50 km below sea level. From the comparison, the rupture zones of large earthquakes off Miyagi are limited in two parts: plate boundary between the forearc and oceanic crusts and below mantle wedge. This limitation is a rare case for subduction zone. Although the seismogenic process beneath the mantle wedge is not fully clarified, our observation suggests the two possibilities: earthquake generation at the plate boundary overridden by the mantle wedge without serpentinization or that in the subducting slab.  相似文献   

19.
Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south Shmax in magnitude until it is less than Sv, at which point Sv becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension.  相似文献   

20.
A temporal seismic network recorded local seismicity along a 130 km long segment of the transpressional dextral strike-slip Liquiñe-Ofqui fault zone (LOFZ) in southern Chile. Seventy five shallow crustal events with magnitudes up to Mw 3.8 and depths shallower than 25 km were observed in an 11-month period mainly occurring in different clusters. Those clusters are spatially related to the LOFZ, to the volcanoes Chaitén, Michinmahuida and Corcovado, and to active faulting on secondary faults. Further activity along the LOFZ is indicated by individual events located in direct vicinity of the surface expression of the LOFZ. Focal mechanisms were calculated using deviatoric moment tensor inversion of body wave amplitude spectra which mostly yield strike-slip mechanisms indicating a NE–SW direction of the P-axis for the LOFZ at this latitude. The seismic activity reveals the present-day activity of the fault zone. The recent Mw 6.2 event near Puerto Aysén, Southern Chile at 45.4°S on April 21, 2007 shows that the LOFZ is also capable of producing large magnitude earthquakes and therefore imposing significant seismic hazard to this region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号