共查询到20条相似文献，搜索用时 31 毫秒
1.
We present maximum usable frequency (MUF) calculation results when a radiowave, radiated at a zero angle, is reflected from the ionosphere along direct and reverse paths when the latitudinal variability of the medium is significant. As an example, we consider the Novorossiysk-California path. Calculations were carried out using a “two-point” method and data of the Monthly MUF Prediction for May 1980 and May 1991. The “two-point” method is validated based on a new way of approximated representation of the Watson integral, which is an exact solution of the benchmark problem related to the point source field in a spherically layered medium. It is shown that MUFs along a reverse path are several MHz higher than MUFs along a direct path during the whole day. 相似文献
2.
走时层析成像是根据首波走时重建声波、地震波或电磁波波速的层析技术，其所用到的射线路径依赖于波速分布。本文提出了一个依据费马原理寻找射线路径的新方法。费马原理指出，从发射点到接点的射线首波的走时极小，因此寻找射线路径的问题是一个最优化问题。 相似文献
3.
Attenuation Tomography of the Yellow Sea/Korean Peninsula from Coda-source normalized and direct Lg Amplitudes 总被引：1，自引：0，他引：1
Sean R. Ford William S. Phillips William R. Walter Michael E. Pasyanos Kevin Mayeda Douglas S. Dreger 《Pure and Applied Geophysics》2010,167(10):1163-1170
We invert for regional attenuation of the crustal phase Lg in the Yellow Sea/Korean Peninsula (YSKP) using three different amplitude attenuation tomography methods. The first method solves for source, site, and path attenuation. The second method uses a scaling relationship to set the initial source amplitude and interpret the source term after inversion. The third method implements a coda-derived source spectral correction. By comparing methods with slightly different assumptions we are able to make a more realistic assessment of the uncertainties in the resulting attenuation maps than is obtainable through formal error analysis alone. We compare the site, source and path-terms produced by each method and comment on attenuation, which correlates well with tectonic and topographic features in the region. Source terms correlate well with each other and with magnitude. Site terms are similar except for two stations that are located in a region that has the greatest difference in path term, which demonstrates the site/path trade-off. Another region of path term difference has the fewest crossing paths, where the tomography method employing the coda-derived spectral correction may perform more accurately since it is not as susceptible to the source/path trade-off. The Bohai Bay basin, an area of extension, is a region of high attenuation, and regions of low attenuation occur along topographic highs located in the Da-xin-an-ling and Changbai Mountains and Mount Taishan. 相似文献
4.
This discussion is based on the paper by Lu et al. (2013) [1]. In this paper, the authors have presented a theoretical study on the PS testing based on the ray path theory and the elastodynamic finite integration technique. This discussion offers some comments on the proposed method for determining the pile length, the ray path of the first P wave arrival for PS testing and analysis results of that paper under discussion. 相似文献
5.
由于星载合成孔径雷达(SAR)系统工作于电离层之上,其信号不可避免地将受到电离层的影响. 背景电离层以及电离层电子密度不规则体多重散射效应可引起距离向图像质量的下降, 在强起伏情况下, 多重散射效应对信号的延迟影响不可忽略. 针对此问题, 本文提出了一种基于SAR回波信号的三频相位自适应TEC反演新方法, 利用反演的结果对电离层的影响进行校正. 给出了校正前后的点目标成像仿真, 结果显示此方法充分考虑了多重散射效应引起的TEC估计误差, 可以有效地补偿电离层对距离向成像的影响, 提高了距离向点目标图像质量. 相似文献
6.
T. D. Borisova N. F. Blagoveshchenskaya V. A. Kornienko V. L. Frolov G. G. Vertogradov V. G. Vertogradov 《Geomagnetism and Aeronomy》2009,49(4):510-518
The experimental studies of the specific behavior of small-scale artificial ionospheric irregularities at midlatitudes, performed using the Sura HF heating facility, are analyzed. The observations were performed in September 2006, using the method of bi-static backscatter by artificial ionospheric irregularities on the Armavir-Sura-St. Petersburg and Samara-Sura-Rostov-on-Don diagnostic paths. It has been detected that the Doppler frequency shift of scattered signals at 3–7 Hz was split on the Armavir-Sura-St. Petersburg path from 1500 to 1600 UT on September 6, 2006. The simultaneous measurements on the Samara-Sura-Rostov-on-Don path indicated that only one signal of bi-static backscatter was present. An analysis of the experimental data, performed using the numerical simulation results, indicated that the ordinary and extraordinary polarization modes of bi-static backscatter signals could be simultaneously observed on September 6, 2006, on the Armavir-Sura-St. Petersburg path. 相似文献
7.
文章针对图论中寻找最短路径的Dijkstra算法内存占用量大,效率低的缺点,对该算法进行了改进,修改后的算法计算效率是原来的四倍,内存使用量和图中节点数呈线性关系.在此基础上,用新算法求出了激发点和接收点的最短走时路径,并由激发接收点的旅行时结合联合迭代法对理论模型和实际场地进行了反演.结果表明：和直射线追踪相比,弯曲射线路径能更好地反演出地质体内部的速度场分布.理论模型和实际探测结果证实改进后的算法是有效的. 相似文献
8.
体波谱振幅相关系数法在肥东地震序列震后判定中的应用 总被引：2，自引：1，他引：1
地震直达体波记录的观测谱包含震源、传播路径和台站信息,而发生在同一震源区的不同地震,如:序列地震,在同一地震台站的记录,受传播路径影响基本相同,地震台站的场地响应、仪器响应也完全相同。因此,序列地震体波观测零频谱的相关系数直接反映震源辐射图型因子的相似性,即震源机制解的相似性。将该方法用于2009年安徽肥东地震序列,与传统方法计算的震源机制解作比较,结果显示,谱振幅相关系数法能反映序列地震震源机制解的变化过程。 相似文献
9.
The dispersion curve of Rayleigh waves is obtained for the path San Fernando Valley-Berkeley, using the single-station surface wave method. The crustal model obtained from dispersion data is in excellent agreement with seismic refraction results. Dispersion data enable the rejection of one of the models previously proposed on the basis of refraction data. 相似文献
10.
Kuroshio intrusion into the South China Sea (SCS) has different forms. In this study, a Kuroshio SCS Index (KSI) is defined
using the integral of geostrophic vorticity from 118° to 121° E and from 19° to 23° N. Three typical paths (the looping path,
the leaking path, and the leaping path) were identified based on the KSI derived from the weekly satellite Absolute Dynamic
Topography from 1993 to 2008. The KSI has a near normal distribution. Using ±1 standard deviation (σ) as the thresholds, the leaking path is the most frequent form with the probability of occurrence at 68.2%, while the probabilities
of occurrence for the looping path and the leaping path are 16.4% and 15.4%, respectively. Similar analysis is also conducted
on the daily Hybrid Coordinate Ocean Model (HYCOM) Global Analysis from 2004 to 2008. The results are generally consistent
with the KSI analysis of the satellite data. The HYCOM data are further analyzed to illustrate patterns of inflows/outflows
and the maximum/minimum salinity as representatives of the subsurface/intermediate waters. The Kuroshio bending and the net
inflow through the Luzon Strait reduce from the looping path to the leaking path to the leaping path. However, the Kuroshio
subsurface water intrudes farthest into the SCS for the leaking path. Vorticity budget associated with the different intrusion
types is then analyzed. The tilting of the relative vorticity, the stretching of the absolute vorticity, and the advection
of planetary vorticity are important for the change of vorticity, whereas the baroclinic and frictional contributions are
three orders smaller. 相似文献
11.
Accelerating the T‐matrix approach to seismic full‐waveform inversion by domain decomposition 
下载免费PDF全文
下载免费PDF全文 A seismic variant of the distorted Born iterative inversion method, which is commonly used in electromagnetic and acoustic (medical) imaging, has been recently developed on the basis of the T‐matrix approach of multiple scattering theory. The distorted Born iterative method is consistent with the Gauss–Newton method, but its implementation is different, and there are potentially significant computational advantages of using the T‐matrix approach in this context. It has been shown that the computational cost associated with the updating of the background medium Green functions after each iteration can be reduced via the use of various linearisation or quasi‐linearisation techniques. However, these techniques for reducing the computational cost may not work well in the presence of strong contrasts. To deal with this, we have now developed a domain decomposition method, which allows one to decompose the seismic velocity model into an arbitrary number of heterogeneous domains that can be treated separately and in parallel. The new domain decomposition method is based on the concept of a scattering‐path matrix, which is well known in solid‐state physics. If the seismic model consists of different domains that are well separated (e.g., different reservoirs within a sedimentary basin), then the scattering‐path matrix formulation can be used to derive approximations that are sufficiently accurate but far more speedy and much less memory demanding because they ignore the interaction between different domains. However, we show here that one can also use the scattering‐path matrix formulation to calculate the overall T‐matrix for a large model exactly without any approximations at a computational cost that is significantly smaller than the cost associated with an exact formal matrix inversion solution. This is because we have derived exact analytical results for the special case of two interacting domains and combined them with Strassen's formulas for fast recursive matrix inversion. To illustrate the fact that we have accelerated the T‐matrix approach to full‐waveform inversion by domain decomposition, we perform a series of numerical experiments based on synthetic data associated with a complex salt model and a simpler two‐dimensional model that can be naturally decomposed into separate upper and lower domains. If the domain decomposition method is combined with an additional layer of multi‐scale regularisation (based on spatial smoothing of the sensitivity matrix and the data residual vector along the receiver line) beyond standard sequential frequency inversion, then one apparently can also obtain stable inversion results in the absence of ultra‐low frequencies and reduced computation times. 相似文献
12.
针对平面不规则RC框架结构,从构件安全层次出发提出基于传力路径的减震设计方法。首先根据广义结构刚度法的基本原理计算结构中所有构件的重要性系数,再假定消能支撑的截面参数,取每层最重要的构件位置布置支撑,经支撑在最不利地震组合下的轴力验算后确定支撑的最终设计参数和数量,然后考虑远场、近场有脉冲以及近场无脉冲地震动从双向输入对结构响应的影响,对减震前、后结构分别进行动力时程分析。分析结果表明,利用此方法优化布置支撑能为结构中重要构件提供有效保护,且在小、中、大震下消能支撑均能运作良好,使整体结构响应得到很好地控制。 相似文献
13.
As a deterministic numerical approach for simulation of earthquake ground motions, the spectral element method (SEM) is applied to generate a broadband acceleration array for dam-canyons instead of the traditional empirical or stochastic methods. Specifically, the SEM analysis model with an extra fine mesh is used for the Pacoima Canyon to simulate the entire path starting from earthquake source rupture via the propagation medium to the local site. The source and the 3D earth model (velocity structure) are validated through the modeling of the Newhall earthquake on 28 October 2012 at a frequency of up to 8 Hz. Subsequently, the San Fernando earthquake records on 13 January 2001 are further used to study the effects of propagation path in simulation. Finally, the spatially varying ground motions at the Pacoima Canyon are obtained for different source mechanisms. The results show that the source mechanism and the local site topography significantly affect the distribution of the peak accelerations along the canyon. 相似文献
14.
DEM smoothing is a common pre-processing technique used to remove undesirable roughness from a DEM. However, it is hypothesized that smoothing straightens and reduces the length of overland flow paths, which is an important factor controlling modelled time-to-peak flow. Currently, there is a lack of research comparing how different smoothing techniques alter the distribution of overland flow path length. Four low-pass filtering techniques were applied to three fine-resolution LiDAR DEMs of varying relief: the mean filter, the median filter, the Gaussian filter, and the feature-preserving DEM smoothing (FPDEMS) filter, each with different degrees of smoothing. Downslope-distance-to-stream distributions were then derived using D8 and D∞ flow directions and statistically compared to distributions derived from the unsmoothed DEM for each study site. The results indicate that the alteration of flow path length distributions as a result of smoothing is complex. Mean flow path lengths may decrease or increase in response to smoothing, depending on landscape relief and the derivation of flow directions, and generalized flow paths may become longer. The largest increase in mean flow path lengths was 19.2 m using the 21 × 21 median filter and D8 flow directions in the high-relief study site, relative to an unsmoothed mean length of 138.6 m in this site. The largest decrease in mean flow path length was 48.9 m using the 21 × 21 mean filter and D∞ flow directions in the low-relief study site, relative to an unsmoothed mean length of 290.9 m in this site. Furthermore, minimal flow path length alterations were achieved with the Gaussian filter when gentle smoothing is required, and with the FPDEMS filter when moderate to aggressive smoothing is required. These results suggest that an appropriate smoothing method should be chosen based on the relief of the landscape and the degree of smoothing required. 相似文献
15.
Danilo Galluzzo Francesca Bianco Mario La Rocca Gaetano Zonno 《Bulletin of Earthquake Engineering》2016,14(7):1903-1916
Ground motion produced by low magnitude earthquakes can be used to predict peak values in high seismic risk areas where large earthquakes data are not available. In the present work 20 local earthquakes (MD∈[?0.3, 2.2]) occurred in the Campi Flegrei caldera during the last decade were analyzed. We followed this strategy: empirical relations were used to calibrate synthetic modeling, accounting for the source features and wave propagation effects. Once the source and path parameters of ground motion simulation were obtained from the reference data set, we extrapolated scenarios for stronger earthquakes for which real data are not available. The procedure is structured in two steps: (1) evaluation of ground motion prediction equation for Campi Flegrei area and assessment of input parameters for the source, path and site effects in order to use the finite fault stochastic approach (EXSIM code); (2) simulation of two moderate-to-large earthquake scenarios for which only historical data or partial information are available (Mw4.2 and Mw5.4). The results show that the investigated area is characterized by high attenuation of peak amplitude and not negligible site effects. The stochastic approach has revealed a good tool to calibrate source, path and site parameters on small earthquakes and to generate large earthquake scenario. The investigated magnitude range represents a lower limit to apply the stochastic method as a calibration tool, due to the small size of involved faults (fault length around 200/300 m). 相似文献
16.
Multiple-point geostatistical simulation is used to simulate the spatial structures of geological phenomena. In contrast to conventional two-point variogram based geostatistical methods, the multiple-point approach is capable of simulating complex spatial patterns, shapes, and structures normally observed in geological media. A commonly used pattern based multiple-point geostatistical simulation algorithms is called FILTERSIM. In the conventional FILTERSIM algorithm, the patterns identified in training images are transformed into filter score space using fixed filters that are neither dependent on the training images nor on the characteristics of the patterns extracted from them. In this paper, we introduce two new methods, one for geostatistical simulation and another for conditioning the results. At first, new filters are designed using principal component analysis in such a way to include most structural information specific to the governing training images resulting in the selection of closer patterns in the filter score space. We then propose to combine adaptive filters with an overlap strategy along a raster path and an efficient conditioning method to develop an algorithm for reservoir simulation with high accuracy and continuity. We also combine image quilting with this algorithm to improve connectivity a lot. The proposed method, which we call random partitioning with adaptive filters simulation method, can be used both for continuous and discrete variables. The results of the proposed method show a significant improvement in recovering the expected shapes and structural continuity in the final simulated realizations as compared to those of conventional FILTERSIM algorithm and the algorithm is more than ten times faster than FILTERSIM because of using raster path and using small overlap specially when we use image quilting. 相似文献
17.
Short-range prediction experiments of the Kuroshio path variabilities south of Japan 总被引：1，自引：0，他引：1
Assimilation and prediction experiments of the Kuroshio path variability south of Japan were conducted to investigate the
predictability of the Kuroshio path. The assimilation and prediction system is composed of an eddy-resolving model and a three-dimensional
variational analysis scheme with vertical coupled temperature–salinity empirical orthogonal function modes. The sea surface
height (SSH) variability and the variations of the Kuroshio path of the assimilation fields are in good agreement with those
observed. The results of the assimilation are then used as the initial conditions for 138 cases of 90-day prediction experiments
conducted from 1993 to 2004. The predictive limit of our system is assessed by the SSH anomaly in the assimilation field and
is found to be around 40–60 days, which is much longer than that of the persistence. The prediction results show good performance
in the transition stage from a straight to a meandering path. For example, a large meandering event that occurred in August
2004 is successfully predicted in a 2-month forecast. Two types of failure cases are investigated. One is a case where the
eastward propagation speed of the meander is faster than a real state. The dynamical response of the model to the assimilation
revealed that an initial shock, caused by the dynamically unbalanced initial condition, induces the fast eastward propagation
of the meander. The other case exhibits an unrealistic meander. In this case, a cold anomaly at an intermediate layer in the
initial condition grows rapidly and results in the unrealistic meander. This implies that the Kuroshio path south of Japan
has a chaotic nature. These facts revealed by the failure cases give us some insight for improving the predictive skill of
the Kuroshio path variability. 相似文献
18.
最短路径射线追踪方法及其改进 总被引：35，自引：9，他引：35
综述了用网络最短路径算法求解地震射线追踪问题的原理、方法技术以及存在问题和改进措施。特别介绍了作者在最短路径算法基础上，提出的动态网络最短路径地震射线追踪方法。该方法先采集从炮点到整个模型所有节点上的初至旅行时，其中，在一个单元内，对相邻每对已计算出最小旅行时的节点进行线性插值，并利用Fermat原理计算未知节点的最小旅行时；然后，利用同样的方法，从接收点开始，反向追踪炮点到接收点的射线路径、该方法能适于各种复杂的非均匀介质，极大地提高了射线追踪的精度。 相似文献
19.
Stochastic simulations have recently become quite popular for estimating synthetic ground motion time histories. For seismically active regions that are not well-monitored or studied extensively, input parameters of the simulations should be carefully selected as the reliability of the simulation results directly depends on the accuracy of the input parameters. In the first part of this study, 13 March 1992 Erzincan (eastern Turkey) earthquake (Mw=6.6), which is recorded at only three strong ground motion stations, is simulated using the stochastic finite-fault method. The source and regional path parameters for this event are adopted from previously validated studies whereas the local site parameters are derived herein. In the second part of the paper, sensitivity of the simulation results with respect to small changes in selected input seismic parameters is investigated. The parameters for which sensitivities are computed include stress drop, crustal shear-wave quality factor and kappa operator. A change of 20% in stress drop value results in 14% change in PGA, whereas a 20% difference in the Q0 value causes 17% change in PGA, and a 20% variation in kappa leads to 15% difference in PGA. Numerical experiments presented in this study prove that the ground motion simulations are prone to trade-off between the source, path and site filters. Hence, input models must be implemented carefully for reliable synthetic ground motions. 相似文献
20.
井间断层分析的研究,是油气储层地质研究的一项重要基础性工作,对油气的运移和聚集其中重要的控制作用。它是利用测井资料,以地层分层为基础,采用计算机技术实现井间断层分析的一种井间断层自动分析方法。动态波形匹配算法是本次研究采用的主要算法,它能够很好地建立井间地层之间的对比关系,通过曲线拟合、特征提取、匹配代价计算等步骤,自动绘制井间地层对比的路径图解。本文在对各种构造的路径图分析的基础上,总结出正断层、逆断层、不整合、同沉积断层、犁式断层和地层尖灭等30种情况下的路径图模式,提出路径图模式及相关概念。在大港油田的实例分析中取得了很好的效果。 相似文献