首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 531 毫秒
1.
铁氧化物-磷灰石矿床(IOA)是全球铁矿资源重要的供给矿床类型之一,受到国内外科研和矿产开采工作者的广泛关注。对铁氧化物-磷灰石矿床研究的争议主要集中在矿床成因上,即岩浆成因或者热液成因。作为一类具有多阶段成矿作用的矿床,IOA型矿床很难用热液或者矿浆成因予以简单概括,需要动态地看待成矿作用。和尚桥铁矿床是一个大型的铁氧化物-磷灰石(IOA)矿床,位于中国东部长江中下游多金属成矿带宁芜矿集区中。和尚桥铁矿床成矿作用含有三个清晰的磁铁矿矿化阶段,分别形成浸染状(Mt1)、角砾状(Mt2)和脉状(Mt3)矿石。对各阶段磁铁矿矿石中磁铁矿进行激光剥蚀等离子质谱(LA-ICP-MS)微区成分测试。在成矿过程中,从早到晚,磁铁矿表现出了从具有岩浆成因特征向具有热液成因特征的方向演化。磁铁矿中Mg和Al含量升高,Cr含量先降低后略微升高,Mn、Co、Ni和V含量先降低后升高,Mo和Sn含量先升高后降低的趋势,表明成矿过程中各阶段围岩及大气水对成矿流体的贡献不一。结合前人研究成果,我们认为和尚桥铁矿床中磁铁矿铁质的来源与安山质侵入岩密切相关,可能来源于岩浆不混溶作用形成的铁质富集流体(熔体),磁铁矿在高温热液环境中结晶沉淀。成矿过程具有多阶段性,推测在各成矿阶段间隙,富铁流体得到富集,同时地层物质不断的加入并导致了磁铁矿成分显示出越来越多的热液成因信息,地层物质(特别是膏盐层)对成矿过程起到了重要的控制作用。  相似文献   

2.
Abstract: The southern segment of the Da Hinggan Mountains is a well‐known tin–polymetallic metallogenic belt of North China with Jurassic‐Cretaceous volcanic–plutonic rocks widespread. Principally because of this, most of the deposits are regarded as epigenetic hydrothermal deposits in genetic connection with the Mesozoic magmatism. But nearly 90 % of the deposits occur in Permian strata, and show concordant stratiform mineralization with a spatial distribution constrained by sedimentary facies of the Permian strata. A close association between mineralization and Permian strata is recognizable. The Huanggang Fe‐Sn deposit was regarded as a standard skarn‐type deposit formed by magmatic hydrothermal solutions in connection with Mesozoic granites. But there are abundant fabrics indicating submarine hydrothermal exhalation both in magnetite ores and in skarns, including bedding/lamination, soft–deformation, synsedimentary brecciation, and collo‐form fabrics. The magnetite orebodies and skarn‐bodies are predominantly concordant stratiform, and extend nearly 20 km along certain stratigraphic horizon, that is, the upper section of the Lower‐Permian submarine volcanic rocks. The Mesozoic granitic rocks crosscut the magnetite and skarn zone. Instead of skarnization, they show strong greisenization associated with cassiterite‐quartz veins, distinct from the magnetite skarn‐ore with disseminated tin in the Permian rocks. The Dajing Sn‐polymetallic deposit is generally regarded as subvolcanic‐hydrothermal origin, principally because of the close spatial association between ores and some of the Mesozoic subvolcanic dikes (called rhyolitic porphyry). Detailed geological, fabric, petrographical and mineralogical study demonstrates that this very kind of subvolcanic rocks is actually a new type of exhalites (called ‘siderite‐sericite chert’ according to its mineral assemblage), formed by hydrothermal sedimentation during the evolution of the Later‐Permian lacustrine basin. There are, however, indeed some rhyolitic porphyry dikes that crosscut orebod–ies. The orebodies and their associated exhalite predate, and thus have no genetic relation, to the Mesozoic magmatic process. We thus conclude that subaqueous exhalative mineralization did occur during the basin evolution at the Permian time in the southern segment of the Da Hinggan Mountains, which is ignored and poorly understood, but might be as important as the hydrothermal mineralization connected with the Mesozoic magmatism.  相似文献   

3.
The increased demand for indium has made it necessary to revise prospects of In-bearing tin ore deposits in the Russian Far East on the basis of geological data and results of recent analytical methods (X-ray fluorescence with synchrotron radiation, atomic absorption, and ICP-MS). The average In contents in ores of the Tigrinoe and Pravourmiiskoe deposits vary from 55 to 70 ppm, which allows tin ore deposits with Sn?sulfide mineralization to be considered as quite promising with respect to In production from ores of Russian deposits. By their estimated In reserves, the Tigrinoe and Pravourmiiskoe deposits may be attributed to large ore objects.  相似文献   

4.
Magnetite, as a genetic indicator of ores, has been studied in various deposits in the world. In this paper, we present textural and compositional data of magnetite from the Qimantag metallogenic belt of the Kunlun Orogenic Belt in China, to provide a better understanding of the formation mechanism and genesis of the metallogenic belt and to shed light on analytical protocols for the in situ chemical analysis of magnetite. Magnetite samples from various occurrences, including the ore–related granitoid pluton, mineralised endoskarn and vein–type iron ores hosted in marine carbonate intruded by the pluton, were examined using scanning electron microscopy and analysed for major and trace elements using electron microprobe and laser ablation–inductively coupled plasma–mass spectrometry. The field and microscope observation reveals that early–stage magnetite from the Hutouya and Kendekeke deposits occurs as massive or banded assemblages, whereas late–stage magnetite is disseminated or scattered in the ores. Early–stage magnetite contains high contents of Ti, V, Ga, Al and low in Mg and Mn. In contrast, late–stage magnetite is high in Mg, Mn and low in Ti, V, Ga, Al. Most magnetite grains from the Qimantag metallogenic belt deposits except the Kendekeke deposit plot in the " Skarn " field in the Ca+Al+Mn vs Ti+V diagram, far from typical magmatic Fe deposits such as the Damiao and Panzhihua deposits. According to the(Mg O+Mn O)–Ti O2–Al2O3 diagram, magnetite grains from the Kaerqueka and Galingge deposits and the No.7 ore body of the Hutouya deposit show typical characteristics of skarn magnetite, whereas magnetite grains from the Kendekeke deposit and the No.2 ore body of the Hutouya deposit show continuous elemental variation from magmatic type to skarn type. This compositional contrast indicates that chemical composition of magnetite is largely controlled by the compositions of magmatic fluids and host rocks of the ores that have reacted with the fluids. Moreover, a combination of petrography and magnetite geochemistry indicates that the formation of those ore deposits in the Qimantag metallogenic belt involved a magmatic–hydrothermal process.  相似文献   

5.
Genetic and mineralogical features of large deposits with complex Sn, W, and Mo mineralization in the Sikhote-Alin and Amur-Khingan metallogenic provinces are considered, as well as those of raremetal, rare earth, and uranium deposits in the Aldan-Stanovoi province. The spatiotemporal, geological, and mineralogical attributes of large deposits are set forth, and their geodynamic settings are determined. These attributes are exemplified in the large Tigriny Sn-W greisen-type deposit. The variation of regional tectonic settings and their spatial superposition are the main factor controlling formation of large deposits. Such a variation gives rise to multiple reactivation of the ore-magmatic system and long-term, multistage formation of deposits. Pulsatory mineralogical zoning with telescoped mineral assemblages related to different stages results in the formation of complex ores. The highest-grade zones of mass discharge of hydrothermal solutions are formed at the deposits. The promising greisen-type mineralization with complex Sn-W-Mo ore is suggested to be an additional source of tungsten and molybdenum. The Tigriny, Pravourminsky, and Arsen’evsky deposits, as well as deposits of the Komsomol’sk and Khingan-Olonoi ore districts are examples. Large and superlarge U, Ta, Nb, Be, and REE deposits are localized in the southeastern Aldan-Stanovoi Shield. The Ulkan and Arbarastakh ore districts attract special attention. The confirmed prospects of new large deposits with Sn, W, Mo, Ta, Nb, Be, REE, and U mineralization in the south of the Russian Far East assure expediency of further geological exploration in this territory.  相似文献   

6.
新疆金矿主要成因类型   总被引：6，自引：1，他引：6  
作者根据目前金矿大多数成因分类方案原则,即采用以成矿作用作为一级分类原则将新疆已知金矿床(点)划分为岩浆热液型、变质热液型、火山热液型和外生砂金等四种成因类型.又依据含金建造、成矿部位以及外地质营力把变质热液型、火山热液型和砂金进一步各分为两个亚型.新疆热液型金矿的成矿时代以华力西晚期为主.  相似文献   

7.
Enrichment iron ore of the Hamersley Province, currently estimated at a resource of over 40 billion tonnes (Gt), mainly consists of BIF (banded iron-formation)-hosted bedded iron deposits (BID) and channel iron deposits (CID), with only minor detrital iron deposits (DID). The Hamersley BID comprises two major ore types: the dominant supergene martite–goethite (M-G) ores (Mesozoic–Paleocene) and the premium martite–microplaty hematite ores (M-mplH; ca 2.0 Ga) with their various subtypes. The supergene M-G ores are not common outside Australia, whereas the M-mplH ores are the principal worldwide resource. There are two current dominant genetic models for the Hamersley BID. In the earlier 1980–1985 model, supergene M-G ores formed in the Paleoproterozoic well below normal atmospheric access, driven by seasonal oxidising electrochemical reactions in the vadose zone of the parent BIF (cathode) linked through conducting magnetite horizons to the deep reacting zone (anode). Proterozoic regional metamorphism/diagenesis at ～80–100°C of these M-G ores formed mplH from the matrix goethite in the local hydrothermal environment of its own exhaled water to produce M-mplH ores with residual goethite. Following general exposure by erosion in the Cretaceous–Paleocene when a major second phase of M-G ores formed, ground water leaching of residual goethite from the metamorphosed Proterozoic ores resulted in the mainly goethite-free M-mplH ores of Mt Whaleback and Mt Tom Price. Residual goethite is common in the Paraburdoo M-mplH-goethite ores where erratic remnants of Paleoproterozoic cover indicate more recent exposure.

Deep unweathered BIF alteration residuals in two small areas of the Mt Tom Price M-mplH deposits have been used since 1999 for new hypogene–supergene modelling of the M-mplH ores. These models involve a major Paleoproterozoic hydrothermal stage in which alkaline solutions from the underlying Wittenoom Formation dolomite traversed the Southern Batter Fault to leach matrix silica from the BIF, adding siderite and apatite to produce a magnetite–siderite–apatite ‘protore.’ A later heated meteoric solution stage oxidised siderite to mplH + ankerite and magnetite to martite. Weathering finally removed residual carbonates and apatite leaving the high-grade porous M-mplH ore. Further concepts for the Mt Tom Price North and the Southern Ridge Deposits involving acid solutions followed, but these have been modified to return essentially to the earlier hypogene–supergene model. Textural data from erratic ‘metasomatic BIF’ zones associated with the above deposits are unlike those of the typical martite–microplaty hematite ore bodies. The destiny of the massive volumes of dissolved silica gangue and the absence of massive silica aureoles has not been explained. Petrographic and other evidence indicate the Mt Tom Price metasomatism is a localised post-ore phenomenon. Exothermic oxidation reactions in the associated pyrite-rich black shales during post-ore removal by groundwater of remnant goethite in the ores may have resulted in this very localised and erratic hydrothermal alteration of BIF and its immediately associated pre-existing ore.  相似文献   

8.
Based on comprehensive studies of fluid inclusions in quartz formed at different stages of hydrothermal process, we consider the physicochemical conditions of formation of epithermal ores (K1) in the Balei ore field. The limiting parameters of hydrothermal process have been established: 353–131 °C, 150–30 bars, and salt concentrations of 7.6–0.5 wt.%-NaCl equiv. A specific feature of the ore-forming process at the Balei deposits is a rapid drop in temperature and pressure, which is typical of open hydrothermal systems. The temperature increase at the beginning of each stage evidences pulse-like ore formation. The productive stage coincides with the initiation of a drastic decrease in temperature (<225 °C) and salt concentration in the solution. The deposits resulted from the functioning of the common Balei ore-magmatic system at shallow depths with a high permeability of the host rocks. High-K calc-alkalic magmas might have been sources of gold mineralization. The ore formation zone is localized above intrusive bodies near their roof. It is not ruled out that the Balei gold was partly borrowed from the products of the early cycles (J2-3) of gold mineralization and from the host rocks.  相似文献   

9.
The ore potential of Pacific Li–F granites is considered on the basis of original and published data on composition of these granites and related metasomatic rocks in the Badzhal (Amur region) and Kuiviveem–Pyrkakai (Chukchi Peninsula) ore districts. The accessory mineralization in rare-metal granites is compared with that in W–Sn deposits. The main features in evolution of magmatic and hydrothermal mineralization are pointed out. A conclusion on the similarity between mineralization of the zwitter–tourmalinite type and accessory minerals in Li–F granites is drawn. It is established that magmatic and hydrothermal types of mineralization belong to the same evolutionary sequence. Genetic links between Li–F granites and the large ore deposits in the East Asian tungsten–tin zone are suggested.  相似文献   

10.
Abstract: Brown–colored sulfide ore (brown ore) occurs in the easternmost part of the Tsunokakezawa No. 1 orebody of the Fukasawa kuroko-type deposits, northern Honshu, Japan. As this type of ores also occur in the marginal or uppermost part of several other kuroko deposits in Japan, the formation of brown ore appears to be repeated in the process of kuroko formation. The brown ore is characterized by its higher Ag concentration (up to around 2000 g/t) than ordinary black ore (Zn–Pb ore) of volcanogenic massive sulfide deposits. The brown ore from the Fukasawa deposits can be divided into following three ore types based on its texture and mineral composition: pyritic brown ore, principal brown ore and “diseased” brown ore. Primary precipitation textures such as framboidal– and colloform-textures and compositional zoning within sulfide grains are significant in the brown ores. This seems to be due to lack of overprinting high temperature mineralization resulting in preservation of primary features. The Ag-Au mineralization is widely observed within the brown ores. Silver and gold are especially concentrated in the barite veinlets in the principal brown ore, which are supposed to be fillings of conduit of hydrothermal solution precipitated in the latest stage of hydrothermal activity. This mineralization seems to occur at waning stage of brown ore formation by ore solution at a lower temperature (around 250°C) than that of main part of brown ore (around 270°C). Relatively low fluid temperature and contribution of oxic ambient seawater may be responsible for the development of the Ag-Au mineralization in the brown ore. The occurrence of framboidal-rich pyritic brown ore having negative δ34S values (less than –10%) and filamentous texture of sphalerite, seeming remnant of bacteria, indicate the presence of intensive microbial activity in the hydrothermal area for brown ore formation. Formation environment of each ore type of the brown ore is supposed to be as follows: Pyritic brown ore is likely to have formed on the sea-floor around redox boundary at temperature (around 240°C) lower than ordinary black ore. Principal brown ore seems to have been formed beneath the shell of the pyritic brown ore at temperature around 270°C. Footwall of the brown ore is disseminated tuff breccia corresponding to feeder zone of hydrothermal fluid. Overprinting chalcopyrite mineralization is not observed in the brown ore except in limited part of “diseased” ore, which occurs just above the disseminated tuff breccia. Based on the features distinct from the ordinary black ore, the brown ore can be regarded as a product in the marginal part of submarine hydrothermal system, where temperature and flow rate of hydrothermal solution was relatively low and microbial activity was intensive. The brown ore seems to well preserve its primary features after its deposition and might show the initial feature of some part of the ordinary stratiform black ore.  相似文献   

11.
Long-standing controversy persists over the presence and role of iron–rich melts in the formation of volcanic rock-hosted iron deposits. Conjugate iron–rich and silica–rich melt inclusions observed in thin-sections are considered as direct evidence for the presence of iron-rich melt, yet unequivocal outcrop-scale evidence of iron-rich melts are still lacking in volcanic rock-hosted iron deposits. Submarine volcanic rock-hosted iron deposits, which are mainly distributed in the western and eastern Tianshan Mountains in Xinjiang, are important resources of iron ores in China, but it remains unclear whether iron-rich melts have played a role in the mineralization of such iron ores. In this study, we observed abundant iron-rich agglomerates in the brecciated andesite lava of the Heijianshan submarine volcanic rock–hosted iron deposit, Eastern Tianshan, China. The iron-rich agglomerates occur as irregular and angular masses filling fractures of the host brecciated andesite lava. They show concentric potassic alteration with silicification or epidotization rims, indicative of their formation after the wall rocks. The iron-rich agglomerates have porphyritic and hyalopilitic textures, and locally display chilled margins in the contact zone with the host rocks. These features cannot be explained by hydrothermal replacement of wall rocks(brecciated andesite lava) which is free of vesicle and amygdale, rather they indicate direct crystallization of the iron-rich agglomerates from iron-rich melts. We propose that the iron-rich agglomerates were formed by open-space filling of volatile-rich iron-rich melt in fractures of the brecciated andesite lava. The iron-rich agglomerates are compositionally similar to the wall-rock brecciated andesite lava, but have much larger variation. Based on mineral assemblages, the iron-rich agglomerates are subdivided into five types, i.e., albite-magnetite type, albite-K-feldsparmagnetite type, K-feldspar–magnetite type, epidote-magnetite type and quartz-magnetite type, representing that products formed at different stages during the evolution of a magmatic-hydrothermal system. The albite-magnetite type represents the earliest crystallization product from a residual ironrich melt; the albite-K-feldspar-magnetite and K-feldspar-magnetite types show features of magmatichydrothermal transition, whereas the epidote-magnetite and quartz-magnetite types represent products of hydrothermal alteration. The occurrence of iron-rich agglomerates provides macroscopic evidence for the presence of iron-rich melts in the mineralization of the Heijianshan iron deposit. It also indicates that iron mineralization of submarine volcanic rock-hosted iron deposits is genetically related to hydrothermal fluids derived from iron-rich melts.  相似文献   

12.
澳大利亚Cloncurry地区大部分被元古宙地层所覆盖,其中赋存有大量世界级的成矿热液系统。大型热液系统大都与含磁铁矿或赤铁矿等铁氧化物的铁矿化岩石密切相关。铁氧化物和铜金矿化的矿物学、地球化学及年代学特征反映出成矿过程可能涉及到多种流体间的作用和水岩反应。对Cloncurry地区典型矿床和区域Na-Ca热液系统的研究表明,含铁氧化物的铁矿化岩石与铜金矿化之间的关系可分为4类:①贫磁铁矿或赤铁矿的"Kiruna-型"铁矿化岩石;②铜金矿化赋存于含铁氧化物的铁矿化岩石中;③与铁氧化物有关的铜金矿化;④少量或者不含铁氧化物的铜金矿化。该分类提供了一些与铁氧化物有关的铜金矿化成因联系、矿物学和矿化类型信息。  相似文献   

13.
Hydrothermal manganese and ferromanganese deposits associated with Neyriz ophiolite colored mélange occurred as small ore deposits in the Abadeh-Tashk area, SE of Fars Province, SW Iran. The deposits are found in three types: a) banded syngenetic ores, b) massive boudin and lens shaped diagenetic ores and c) vein and veinlet epigenetic ores. Microtextural, geochemical and mineralogical data associated with petrographic Raman, FTIR and SEM studies indicated that the primary Fe compounds formed series of microbially mediated biomats and Mn compounds were precipitated as an amorphous oxide on an active oxide surface accompanying silica gels. Field relationships between ore and host rock, high Mn/Fe ratio (17.43 to 40.79), ΣLREE, positive Eu and negative Ce anomalies in syngenetic ore types reveal that the ores were formed by hydrothermal fluid in an oceanic floor environment. Manganese was fractionated from iron due to physicochemical changes as well as microbial activities in the sedimentary environment. Microbial remains as filamentous beads with regular circular shapes, vermiform structures, series of Fe-rich biomats, traces of embedded organic material besides trace metals and REE concentrations in Mn ores emphasize the role of microorganisms in Fe and Mn precipitation. Syngenetic mineralization took place under suboxic neutrophilic conditions, while diagenetic processes resulted in variably reduced Fe- and Mn-oxides via organic matter decomposition, forming rhodochrosite as the end product. Braunite formation occurred most probably as a biogeochemically mediated early diagenetic product. Diagenetic and epigenetic Mn ores were formed when primary Mn deposits underwent subsequent diagenetic and remobilization–redeposition events respectively.  相似文献   

14.
Iron oxide–apatite deposits are present in Upper Eocene pyroxene-quartz monzonitic rocks of the Zanjan district, northwestern Iran. Mineralization occurred in five stages: (1) deposition of disseminated magnetite and apatite in the host rock; (2) mineralization of massive and banded magnetite ores in veins and stockwork associated with minor brecciation and calcic alteration of host rocks; (3) deposition of sulfide ores together with potassic alteration; (4) formation of quartz and carbonate veins and sericite, chlorite, epidote, silica, carbonate, and tourmaline alteration; and (5) supergene alteration and weathering. U–Pb dating of monazite inclusions in the apatite indicates an age of 39.99?±?0.24 Ma, which is nearly coeval with the time of emplacement of the host quartz monzonite, supporting the genetic connection. Fluid inclusions in the apatite have homogenization temperatures of about 300 °C and oxygen isotopic compositions of the magnetite support precipitation from magmatic fluids. Late-stage quartz resulted from the introduction of a cooler, less saline, and isotopically depleted fluid. The iron oxide–apatite deposits in the Tarom area of the Zanjan district are typical of a magmatic–hydrothermal origin and are similar to the Kiruna-type deposits with respect to mineral assemblages, fabric and structure of the iron ores, occurrence of the ore bodies, and wall rock alteration.  相似文献   

15.
Reliable age estimation was obtained originally in this study for gold mineralization of the Malomyr deposit (the eastern part of the Mongolian–Okhotsk foldbelt), which is one of the most well-known deposits in the Russian Far East. The data obtained show that the age of hydrothermal process that resulted in the formation of the Malomyr deposit may be estimated as ～133–132 Ma. Data on magmatism of the same age within the considered region are absent. In the opinion of the authors, mobilization, redistribution of the ore material, and the formation of the Malomyr deposit were mostly controlled by dislocation processes accompanied by hydrothermal activity, which is supported by the results of structural studies.  相似文献   

16.
The Sin Quyen Cu–Fe–Au–REE deposit is localized in the Proterozoic deposits of the Phan Xi Pang zone, northern Vietnam. The mineralization is formed by lenticular and sheet-like bodies occurring concordantly with the host rocks. Seventeen orebodies have been recognized in the deposit, which form an ore horizon up to 140 m in total thickness, about 2 km in strike, and up to 350 m in dip. The ores are of simple mineral composition: Au-rich copper and iron sulfides (chalcopyrite, pyrite, pyrrhotite) and iron oxides (magnetite, hematite). Gold and silver are distributed unevenly in the ores: Their contents vary from hundredths and tenths of ppm to 1.8 ppm. Copper sulfide ores are the main concentrator of gold and silver. All ores are characterized by high REE contents, tens and hundreds of times exceeding the element clarkes. The highest contents have been revealed for Ce and La. Orthite is the main carrier of REE. No correlation between REE and ore elements of sulfide-oxide ores has been revealed, which points to the independent formation of the mineralization. Orebodies together with the host rocks underwent metamorphism at 500–600 to 630–685 °C and 3–7 kbar. The spatial association of the mineralization with amphibolites (metamorphosed basites) and the mineral composition of ores suggest that the Sin Quyen deposit is of Cyprian volcanogenic type.  相似文献   

17.
庐枞盆地龙桥铁矿床中菱铁矿的地质特征和成因意义   总被引：6，自引：0，他引：6  
龙桥铁矿床是庐枞火山岩盆地中的一个大型的铁矿床,多年来对其矿床成因的认识存在较大的争论.文章在野外地质研究工作的基础上,通过对矿床中菱铁矿的岩矿分析鉴定和电子探针测试,确定了矿床纹层状矿石中的菱铁矿为沉积成因.通过对菱铁矿的产出特征分析,并结合龙桥铁矿床的部分地质地球化学研究成果,认为在该矿床形成过程中,早期沉积形成了纹层状的菱铁矿层,在燕山期的岩浆热事件中,部分沉积菱铁矿被交代形成了磁铁矿和具有残余骸晶结构等一系列矿石交代组构特征的矿物.纹层状矿石既具有沉积特征,也具有热液改造特征,证实了矿床的形成存在早期(三叠纪)的沉积成矿(菱铁矿)作用和晚期(燕山期)的热液成矿(磁铁矿)作用.菱铁矿的研究为进一步确定龙桥铁矿床的成因提供了新的佐证.  相似文献   

18.
Some geological, petrochemical, and geochemical characteristics of carbonaceous shales as a new unconventional natural source of gold and PGE are considered by the example of the Kimkan and Sutyr’ units of the Bureya massif (southern Far East, Russia). It is shown that shales of the units belong to the terrigenous-carbonaceous and siliceous-carbonaceous formations. They accumulated in deep-water trenches, and the active continental margin was probably their main provenance. The carbonaceous terrigenous-sedimentary units and precious-metalores in them show specific petrochemical characteristics different for complexes with predominantly PGE and gold mineralization. According to these characteristics, carbonaceous complexes with high Fe contents, low total contents of alkalies, and high K/Na ratios are promising for PGE-rich ores. Gold ores are usually localized in black-shale strata with high total contents of alkalies and low K/Na. In this respect, the shales and Fe-ores of the Kimkan unit obviously contain high-PGE mineralization, while the rocks of the Sutyr’ unit can bear gold deposits. We assume that the PGE mineralization is genetically related to the formation and transformation of carbonaceous rocks. At the same time, most of gold in the carbonaceous shales is native and is not related to carbon; it is present in mineral assemblages resulted from superimposed sulfidization and silicification.  相似文献   

19.
Although the Mehdiabad zinc-lead deposit is one of the most well-known deposits in the central Iran structural zone, the genesis of the deposit remains controversial. The host rock of the ore is a dolomitic limestone of the Lower Cretaceous Taft Formation. In the two main orebodies of the deposit, which includes the Black Hill and East Ridge ore zones, the oxide and sulfide ores are observed at the surface and at depth, respectively. The elements Zn, Fe, Mn and Mg are more abundant in the East Ridge ore zone (in both sulfide and oxide ores), with Ba, Pb, Ag and Cu being more abundant in the Black Hill oxide ore. Based on the distribution of elements and their correlation with each other in these ore zones, the elements are divided into three general groups, that of terrigenous elements, chemically-deposited elements and ore-forming (hydrothermally deposited) elements, a division that is supported by the results of factor analyses. The spatial distribution of elements is jointly affected by contact with host rocks, the boundary of oxide-sulfide ores and fault zones. The main factors governing the distribution of elements are the mechanical transfer of detrital sediments, chemical sedimentation, transfer by hydrothermal fluids, oxidation and surface dissolution, all of which affected the spatial distribution of elements. The ore-forming elements are mostly affected by hydrothermal fluids and oxidation. This study not only provides additional information about the genesis of the Mehdiabad deposit, but also could assist in the exploitation of ore and further exploration purposes. The results of this study can aid in the exploration and exploitation of the Mehdiabad deposit and similar deposits in the region.  相似文献   

20.
Abstract: The Anle Sn‐Cu and Huanggangliang Fe‐Sn deposits have been exploited in the Linxi district, which is located 165 km northwest of Chifeng City in northern China. In this study the formation mechanisms of the tin deposits in the Anle and Huanggangliang mining area were investigated to understand the mechanisms of tin mineralization in northern China. The veins of the Anle deposit are divided into cassiterite–quartz–chlorite veins, chalcopyrite‐bearing quartz veins, cassi–terite–chalcopyrite–bearing quartz veins and sphalerite‐quartz veins. The sequence of mineralization is tin mineralization (stage I), copper mineralization (stage II), and lead‐zinc mineralization (stage III). The Huanggangliang tin deposit consists of magnetite skarn orebodies and many cassiterite‐bearing feldspar–fluorite veins and veinlets cutting the magnetite orebodies. The fluid inclusions in quartz and fluorite in ores from the Anle and Huanggangliang tin deposits are divided into two‐phase fluid inclusions, vapor‐rich fluid inclusions and poly‐phase fluid inclusions. The final homogenization temperatures of fluid inclusions of quartz in the ores of the Anle deposit and fluorite of tin‐bearing feldspar veins in the Huanggangliang tin deposit range from 195 to 425C and from 215 to 450C, respectively. The fluids responsible for the Anle and Huanggangliang tin deposits were of very high temperature and NaCl‐rich ones containing K, Ca, Al, Si, Ti, Fe and Cl in addition to ore metals such as Sn and Cu. The temperature and chemical composition of fluid in fluid inclusions of igneous rocks in the mining area are very similar to those of fluid in fluid inclusions in the ores of these deposits. The fluid for these ore deposits had a close relation with the fluid coexisting with melt of Late Jurassic granitic rocks in this mining area. Salinities of fluid inclusions from these ore deposits and granitic rocks in the mining area were estimated to range from 35 to 50 wt % NaCl equivalent. Based on arsenopy‐rite geothermometry and fluid inclusion studies, a fluid containing 40 wt% NaCl (eq.) could be formed by phase separation of fluid having 6 wt% NaCl (eq.) at a temperature of 420 to 500C and a pressure of 0.3 to 0.4 kb. The temperatures and pressures presented above indicate an NaCl‐rich magmatic fluid derived from granitic melt that had intruded into a shallow level of crust caused the Sn–Fe–Cu mineralization of the mining area. The geological relationship between these ore deposits and granitic bodies around the ore deposits, and the similarity of fluids forming these ore deposits and coexisting with granitic melt, suggest that these ore deposits were formed by the activity of fluid derived from granitic melt in Late Jurassic age.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号