首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献，搜索用时 171 毫秒
1.
Laser ablation–inductively coupled plasma–mass spectrometry(LA–ICP–MS) was used to determine the trace element concentrations of magnetite from the Heifengshan, Shuangfengshan, and Shaquanzi Fe(–Cu) deposits in the Eastern Tianshan Orogenic Belt. The magnetite from these deposits typically contains detectable Mg, Al, Ti, V, Cr, Mn, Co, Ni, Zn and Ga. The trace element contents in magnetite generally vary less than one order of magnitude. The subtle variations of trace element concentrations within a magnetite grain and between the magnetite grains in the same sample probably indicate local inhomogeneity of ore–forming fluids. The variations of Co in magnetite between samples are probably due to the mineral proportion of magnetite and pyrite. Factor analysis has discriminated three types of magnetite: Ni–Mn–V–Ti(Factor 1), Mg–Al–Zn(Factor 2), and Ga– Co(Factor 3) magnetite. Magnetite from the Heifengshan and Shuangfengshan Fe deposits has similar normalized trace element spider patterns and cannot be discriminated according to these factors. However, magnetite from the Shaquanzi Fe–Cu deposit has affinity to Factor 2 with lower Mg and Al but higher Zn concentrations, indicating that the ore–forming fluids responsible for the Fe–Cu deposit are different from those for Fe deposits. Chemical composition of magnetite indicates that magnetite from these Fe(–Cu) deposits was formed by hydrothermal processes rather than magmatic differentiation. The formation of these Fe(–Cu) deposits may be related to felsic magmatism.  相似文献   

2.
Cu and Fe skarns are the world’s most abundant and largest skarn type deposits, especially in China, and Au-rich skarn deposits have received much attention in the past two decades and yet there are few papers focused on schematic mineral deposit models of Cu–Fe–Au skarn systems. Three types of Au-rich deposits are recognized in the Edongnan region, Middle–Lower Yangtze River metallogenic belt: ~140 Ma Cu–Au and Au–Cu skarn deposits and distal Au–Tl deposits; 137–148 Ma Cu–Fe; and 130–133 Ma Fe skarn deposits. The Cu–Fe skarn deposits have a greater contribution of mantle components than the Fe skarn deposits, and the hydrothermal fluids responsible for formation of the Fe skarn deposits involved a greater contribution from evaporitic sedimentary rocks compared to Cu–Fe skarn deposits. The carbonate-hosted Au–Tl deposits in the Edongnan region are interpreted as distal products of Cu–Au skarn mineralization. A new schematic mineral deposit model of the Cu–Fe–Au skarn system is proposed to illustrate the relationship between the Cu–Fe–Au skarn mineralization, the evaporitic sedimentary rocks, and distal Au–Tl deposits. This model has important implications for the exploration for carbonate–hosted Au–Tl deposits in the more distal parts of Cu–Au skarn systems, and Fe skarn deposits with the occurrence of gypsum-bearing host sedimentary rocks in the MLYRB, and possibly elsewhere.  相似文献   

3.
The Yaojialing deposit is the first large-scale Zn–Au–Cu polymetallic skarn deposit located in the Shatanjiao ore field of the Tongling area in the Middle–Lower Yangtze belt. It has distinct metallogenic characteristics and is clearly different from the known skarn Cu–Au deposits in the Tongling area and the Middle–Lower Yangtze belt. Previous studies of the Yaojialing deposit have included rock geochemistry, alteration and mineralization characteristics, as well as metallogenesis and metallogenic models. However, there are still numerous problems concerning the coexistence of multiple elements, metallogenetic specialization of the magma and the metallogenic model. In this study, using the latest production exploration work on the deposit, we investigated the Yaojialing deposit including its geological characteristics, petrography, LA–ICP MS zircon U–Pb dating and whole rock geochemistry. Two kinds of magmatic rocks have been distinguished for the first time in the deposit, amongst which the granodiorite porphyry exposed on the surface of the mining area, which is the host rock of the veined lead–zinc ore body, is the wall-rock intrusion; and the deep concealed quartz monzonite porphyry is the causative intrusion, the distribution of orebodies and wall-rock alteration characteristics showing regular zoning around the quartz monzonite porphyry. The 206Pb/238U weighted average age of the granodiorite porphyry is 140.2 ± 1.0 Ma (MSWD = 0.85, n = 13) by LA–ICP MS zircon U–Pb dating, while the quartz monzonite porphyry is 138.9 ± 1.2 Ma (MSWD = 0.60, n = 16), which is consistent with petrographic evidence. The geochemical characteristics show that the quartz monzonite porphyry is a high-K calc-alkaline series peraluminous rock. The trace element characteristics show that the quartz monzonite porphyry is enriched in LILE such as K, Rb, Sr, Ba and LREE, yet depleted in HFSE such as Nb, Ta, P and Ti. The Yaojialing deposit shows the mineralization characteristics of proximal skarn and distal skarn, having the common characteristics of ‘multi-storey’ and ‘Trinity’ metallogenic models.  相似文献   

4.
Biotite is an important hydrated ferromagnesian silicate mineral in igneous rocks and porphyry deposits. The determination of chemical compositions of biotite plays an important role in both igneous petrology and ore forming processes. This paper summarizes research results of magmatic and hydrothermal biotites exemplified by the Lakange porphyry Cu–Mo deposit and the Qulong porphyry Cu deposit in the Gangdese porphyry–skarn metallogenic belt, Tibet. Biotite mineral chemistry can provide critical insights into classification, geothermometer, geothermobarometry, oxygen fugacity, petrogenesis and tectonic setting, evaluating magmatic-hydrothermal process by halogen and halogen fugacity ratios, and distinguishing between barren and mineralized rocks. Biotite provides the latest mineralogical evidence on metallogenic prognosis and prospecting evaluation for porphyry Cu polymetallic deposits or magmatic hydrothermal deposits.  相似文献   

5.
In recent years, several large and medium-sized ore deposits have been discovered in the shallow cover of Xuancheng, Anhui Province, indicating that this area has a productive metallogenic geological background and may be a potential prospecting region. Based on systematic investigation, the geological and mineralization characteristics of porphyry Cu-Au deposits and skarn Cu-Mo-W deposits in this region have been summarized. Zircon U-Pb dating (LA-ICP-MS) of the Chating quartz-diorite porphyry and the Kunshan biotite pyroxene diorite yield concordia ages of 145.5 ± 2.1 Ma and 131.8 ± 2.1 Ma, respectively. Meanwhile, the Re-Os dating analyses for molybdenite from the Shizishan and Magushan skarn Cu-Mo deposits yielded 133.81 ± 0.86 Ma and 143.8 ± 1.4 Ma ages, respectively. When viewed in conjunction with previous studies, it is suggested that twostage (the early stage of 145–135 Ma and the late stage of 134–125 Ma) magmatism may have occurred during the Mesozoic in Xuancheng region. Early stage intrusive rocks are distributed along both sides of the Jiangnan deep fault (JDF).The intrusive rocks to the north of the JDF are mainly quartz-diorite porphyry and granodiorite (porphyry) rocks, related to porphyry Cu-Au deposits and skarn-type Cu-Mo-W deposits. These deposits belong to the first stage of the porphyry-skarn copper gold metallogenic belt of the Middle-Lower Yangtze Metallogenic Belt (MLYB), associated with the high potassium calc-alkaline intermediate-acid intrusions. The magmatic and ore-forming materials are mainly derived from the enriched lithospheric mantle. South of the JDF, the Magushan granodiorite is a representative intrusive rock of the first stage I-type granite, which hosts the Magushan Cu-Mo skarn deposit, similar to the W-Mo-Cu skarn deposits in the Eastern Segment of the Jiangnan Uplift Metallogenic Belt (ESJUB). The magmatic and metallogenic materials mainly came from the Neoproterozoic basement, with the possible participation of a small amount of mantle components. The late stage magmatism was dominated by volcanic rocks with a small amount of intrusive rocks, which were consistent with the limited volcanic-intrusive activities in the second stage of the MLYB. The H-O stable isotopes of ore deposits in the region indicate that the ore-forming hydrothermal fluids of the porphyry and skarn deposits were mostly of magmatic water for the ore-forming stage, the percentage of meteoric water obviously increasing during the late ore-forming stage. The ore-forming materials of the deposits are mainly from the deep magma with a few sedimentary wall rocks, according to the stable carbon isotopes of the carbonates in the ore deposits. Additionally, according to previous research, the molybdenite from the MLYB has a higher Re content than that of the ESJUB. The higher content of Re in the molybdenite from the Shizishan deposit is identical to that of MLYB rather than ESJUB, whereas Re characteristics in molybdenite of Magushan deposit are similar to that of ESJUB. The differences in Re characteristics indicate the different deep processes and ore-forming material sources (mainly mantle composition for the former and crustal materials for the latter) of these ore deposits on opposite sides of the JDF.  相似文献   

6.
The Beizhan large iron deposit located in the east part of the Awulale metallogenic belt in the western Tianshan Mountains is hosted in the Unit 2 of the Dahalajunshan Formation as lens, veinlets and stratoid, and both of the hanging wall and footwall are quartz-monzonite; the dip is to the north with thick and high-grade ore bodies downwards. Ore minerals are mainly magnetite with minor sulfides, such as pyrite, pyrrhotite, chalcopyrite and sphalerite. Skarnization is widespread around the ore bodies, and garnet, diopside, wollastonite, actinolite, epidote, uralite, tourmaline sericite and calcite are ubiquitous as gangues. Radiating outwards from the center of the ore body the deposit can be classified into skarn, calcite, serpentinite and marble zones. LA-ICP-MS zircon U-Pb dating of the rhyolite and dacite from the Dahalajunshan Formation indicates that they were formed at 301.3±0.8 Ma and 303.7±0.9 Ma, respectively, which might have been related to the continental arc magmatism during the late stage of subduction in the western Tianshan Mountains. Iron formation is genetically related with volcanic eruption during this interval. The Dahalajunshan Formation and the quartz-monzonite intrusion jointly control the distribution of ore bodies. Both ore textures and wall rock alteration indicate that the Beizhan iron deposit is probably skarn type.  相似文献   

7.
Abstract: The Jinchuan deposit is hosted by the olivine-rich ultramafic rock body, which is the third-largest magmatic sulfide Ni–Cu deposit in the world currently being exploited. Seeking new relaying resources in the deep and the border of the deposit becomes more and more important. The ore body, ore and geochemistry characteristics of the concealed Cu-rich ore body are researched. Through spatial analysis and comparison with the neighboring II1 main ore body, the mineralization rule of the concealed Cu-rich ore body is summed up. It is also implied that Cu-rich magma may exist between Ni-rich magma and ore pulp during liquation differentiation in deep-stage chambers, which derives from deep-mantle Hi–MgO basalt magma. It is concluded that the type of ore body has features of both magmatic liquation and late reconstruction action. It has experienced three stages: deep liquation and pulsatory injection of the Cu- and PPGE-rich magma, concentration of tectonic activation, and the later magma hydrothermal superimposition. In addition, the Pb and S isotopes indicate the magma of I6 concealed Cu-rich ore body originates predominantly from mantle; however, it is interfused by minute crust material. Finally, it is inferred that the genesis of the Cu–Ni sulfide deposit is complex and diverse, and the prospect of seeking new deep ore bodies within similar deposits is promising, especially Cu-rich ore bodies.  相似文献   

8.
The Kengdenongshe deposit is a newly discovered large Au-Ag-Pb-Zn polymetallic deposit in the eastern Kunlun metallogenic belt, and the genetic relationship between Pb-Zn-rich ore bodies and Au-rich ore bodies in this deposit is controversial. Therefore, comparative studies of mineralization, alteration, and fluid inclusions in the two types of ore bodies were carried out with the statistical analysis of the correlation among ore-forming elements of Au, Ag, Pb and Zn. The results show that, from north to south, the mineralization changes gradually from Pb-Zn-rich to Au-rich with the wall-rock alteration from silicification-epidotization to baritization-marbleization-silicification. In addition, the structures of Pb-Zn-rich ores indicate a hydrothermal sedimentary origin with the late hydrothermal superposition, while those of Au-rich ores show features of hydrothermal origin. Besides, based on the study of fluid inclusions in this mining area, the ore-forming fluid of Pb-Zn-rich ores is low temperature (focus on 150-170°C) and low-medium salinity (1.74%-10.24% NaCleqv), while that of Au-rich ores displays low-medium temperature (manily 130-250°C) with low-medium salinity (0.35%-10.24% NaCleqv). Pb-Zn and Au-Ag show positive correlation (correlation coefficient r>0.25), but Au is poorly correlated with Pb and Zn (correlation coefficient r<0.15). However, to due to the late stage hydrothermal superimposition, Au is rather well correlated with Pb in high grade ores. In summary, there may exist two epochs of mineralization in the Kengdenongshe polymetallic deposit. The early one is Pb-Zn mineralization stage with characteristics of hydrothermal sedimentary origin, and the ore-forming fluid may be derived from the mixture of magmatic water and seawater. While the later one is Au mineralization stage, having characteristics of hydrothermal origin with subsequent hydrothermal superimpositions, and the ore-forming fluid is mainly derived from magmatic water that mixed with meteoric water. © 2018, Science Press. All right reserved.  相似文献   

9.
The Southern Great Xing'an Range(SGXR) hosts a number of Early Cretaceous Sn and associated metal deposits, which can be divided into three principal types according to their geological characteristics: skarn type deposits, porphyry type deposits and hydrothermal vein type deposits. Fluid inclusion assemblages of different types of deposits are quite different, which represent the complexities of metallogenic process and formation mechanism. CH_4 and CO_2 have been detected in fluid inclusions from some of deposits, indicating that the ore-forming fluids are affected by materials of Permian strata. Hydrogen and oxygen isotope data from ore minerals and associated gangue minerals indicate that the initial ore fluids were dominated by magmatic waters, some of which had clearly exchanged oxygen with wall rocks during their passage through the strata. The narrow range for the δ~(34)S values presumably reflects the corresponding uniformity of the ore forming fluids, and these δ~(34)S values have been interpreted to reflect magmatic sources for the sulfur. The comparation between lead isotope ratios of ore minerals and different geological units' also reveals that deeply seated magma has been a significant source of lead in the ores.  相似文献   

10.
Determination of Fe2+/Fe3+ ratios from metallogenic belts to explore controlling physical and chemical conditions of rock formation is of great significance. In order to explore magnetite Fe2+/Fe3+ ratios of the Qimantag metallogenic belt, part of the Eastern Kunlun orogenic belt in the northeastern margin of the Qinghai–Tibetan plateau, western Central Orogenic Belt of China, and overcome the limitation of the traditional electronic probe, five different measurement methods are proposed and their respective advantages and disadvantages evaluated, with the composition data of the magnetite obtained using electron probe microanalysis (EPMA). The direct oxygen measurement method has a significant impact on the determination results of FeO and Fe2O3, but the accuracy and uniformity of the results are low. The valence method (Flank method) based on the spectral intensity ratio of Lα to Lβ for iron is also unreliable for FeO and Fe2O3 measurements because it is difficult to establish a relationship between Lβ/Lα, the spectral intensity ratio, and the Fe2+/Fe3+ content ratio. In comparison, the charge difference method, the surplus-oxygen method and the M?ssbauer spectrum method are still the most favorable. M?ssbauer spectroscopy, with its isomer movement particularly sensitive to the oxidation state of iron, yields results closer to 0.5, which is relatively reliable. Earlier magnetite deposits are located in intrusions or contact zones and formed by magmatic fluids with high Fe2+/Fe3+ ratios, whereas later magnetite deposits are farther away from intrusions and have low Fe2+/Fe3+ ratios. The transformation mechanism of hematite and magnetite in the Qimantage metallogenic belt is also studied. No large volume changes, such as pore filling and shrinkage fracture, were detected in the metallogenic belt, and the transformation mechanism is more similar to a reoxidation and reduction mechanism.  相似文献   

11.
西天山敦德铁矿床磁铁矿原位LA-ICP-MS元素分析及意义   总被引：5，自引：3，他引：2  
敦德铁矿床是天山成矿带内新近发现并勘查的一处大型海相火山岩型铁矿床。该矿床的矿石可划分为浸染状、稠密浸染状、条带状和块状4种主要类型。其中的条带状矿石包括磁铁矿_矽卡岩条带和磁铁矿_方解石条带2种亚类型。块状矿石内出现围岩或矽卡岩角砾时则构成角砾状矿石,其磁铁矿的成因无甚差异。根据野外观察和矿相显微研究,认为磁铁矿形成于早期矽卡岩阶段后的退化蚀变阶段,之后又被更晚的硫化物阶段和绿泥石_碳酸盐阶段的矿物叠加。敦德磁铁矿内主要发生了Al、Mn、Mg和Zn的类质同象置换,此外,也含有Ti、Si、Ca等次要元素以及Na、K、V、Cr、Ni、Co等多种可检测到的微量元素。磁铁矿内元素含量在空间上显示出直观的差异,由深部到浅部,Mn、Zn含量升高,Si、Ca、Na、K、Pb、Ba、Sr、Sb、Cu等含量降低。在Ti O2_Al2O3_Mg O图解、Ti O2_Al2O3_(Mg O+Mn O)图解和Ca+Al+Mn_Ti+V图解上,敦德磁铁矿的分析数据均投影于热液交代(矽卡岩)成因区域。综上认为,该矿床的磁铁矿可能为热液充填交代成因。  相似文献   

12.
夕卡岩铁矿床的成因一直以来备受争议,主要有接触交代和矿浆成因等模型。河北武安玉石洼铁矿是邯邢地区主要的夕卡岩铁矿之一,对矿区尖山剖面中的三类磁铁矿成分进行详细研究有助于解决此问题。产于剖面下部玉石洼铁矿主矿体中的磁铁矿以高Ti为特征,而在上部结晶灰岩中矿脉状中磁铁矿以高Si(w(SiO2)>1%)为特点,赋存于中部二长岩矿脉中的磁铁矿具有过渡的成分特征。通过对此三类磁铁矿中主量元素、微量元素研究发现,从下部玉石洼主矿体向上部结晶灰岩中的磁铁矿脉,磁铁矿具有Ti含量逐渐减少而Si、Mg含量逐渐增加的特征。高硅磁铁矿呈自形晶,与方解石平衡共生,其形成与流体有关,很可能是流体晶矿物。磁铁矿FeV/Ti判别图解显示下部玉石洼主矿体中部分磁铁矿具有岩浆成因,二长岩和结晶灰岩中的脉状矿石中磁铁矿具有热液成因,磁铁矿由下部到上部具有岩浆成因过渡为热液成因的连续过程。根据玉石洼矿区磁铁矿的这些特征,我们认为铁矿浆中含有大量流体,应该为“含铁熔体流体”,由于流体超压使“含铁熔体流体流”在岩浆通道中快速上升,至地壳浅部空间就位,在空间上由下部形成高温高Ti磁铁矿过渡为上部形成具有流体晶特征的高Si磁铁矿的岩浆通道成矿系统模型。  相似文献   

13.
智博铁矿床位于新疆西天山阿吾拉勒成矿带东段,主要赋矿围岩为石炭系大哈拉军山组安山岩、玄武质安山岩和火山碎屑岩.该矿床主要有东、中、西3个矿区,其中以东矿区为主矿区.矿体主要呈层状、似层状、厚板状和透镜状.金属矿物以磁铁矿为主,含有少量黄铁矿、赤铁矿和黄铜矿.矿石构造以块状和浸染状构造为主,此外还有角砾状构造、条带状构造、流纹状构造和脉状构造等.矿石结构有他形-半自形结构、板条状结构和海绵陨铁结构等.智博铁矿床蚀变矿物主要有透辉石、钠长石、阳起石、绿帘石、钾长石等,含有少量方解石、石英和绿泥石等.根据矿石和矿物共生关系,将智博铁矿床划分为岩浆期和热液期2个成矿期次.岩浆期可划分为钠长石-透辉石阶段和磁铁矿-阳起石阶段,热液期可划分为钾长石-绿帘石阶段和石英-硫化物阶段.根据智博磁铁矿的电子探针数据,各类磁铁矿矿石中除热液期含黄铁矿致密块状矿石w(FeOT)变化较大外,其他类型磁铁矿的w(FeOT)多集中在90％～95％,又以岩浆期块状矿石中w(FeOT)最高.对其氧化物进行相应的图解,电子探针数据中w(CaO)、w(Al2O3)、w(MnO)、w(K2O)、w(MgO)和w(SiO2)都和w(FeOT)有良好的负相关性,而NiO和TiO2则具有一定的正相关性,V2O3则在岩浆期块状和含磁铁矿脉矿石中含量明显高于其他类型矿石.根据磁铁矿TiO2-Al2O3-MgO成因图解和w(Ca+Al+Mn)-w(Ti+V)成因图解显示,智博铁矿床矿石兼具岩浆型成因特征和热液型成因特征,表明智博铁矿床的形成与岩浆作用和火山热液交代作用有关.  相似文献   

14.
铁氧化物-磷灰石矿床(IOA)是全球铁矿资源重要的供给矿床类型之一,受到国内外科研和矿产开采工作者的广泛关注。对铁氧化物-磷灰石矿床研究的争议主要集中在矿床成因上,即岩浆成因或者热液成因。作为一类具有多阶段成矿作用的矿床,IOA型矿床很难用热液或者矿浆成因予以简单概括,需要动态地看待成矿作用。和尚桥铁矿床是一个大型的铁氧化物-磷灰石(IOA)矿床,位于中国东部长江中下游多金属成矿带宁芜矿集区中。和尚桥铁矿床成矿作用含有三个清晰的磁铁矿矿化阶段,分别形成浸染状(Mt1)、角砾状(Mt2)和脉状(Mt3)矿石。对各阶段磁铁矿矿石中磁铁矿进行激光剥蚀等离子质谱(LA-ICP-MS)微区成分测试。在成矿过程中,从早到晚,磁铁矿表现出了从具有岩浆成因特征向具有热液成因特征的方向演化。磁铁矿中Mg和Al含量升高,Cr含量先降低后略微升高,Mn、Co、Ni和V含量先降低后升高,Mo和Sn含量先升高后降低的趋势,表明成矿过程中各阶段围岩及大气水对成矿流体的贡献不一。结合前人研究成果,我们认为和尚桥铁矿床中磁铁矿铁质的来源与安山质侵入岩密切相关,可能来源于岩浆不混溶作用形成的铁质富集流体(熔体),磁铁矿在高温热液环境中结晶沉淀。成矿过程具有多阶段性,推测在各成矿阶段间隙,富铁流体得到富集,同时地层物质不断的加入并导致了磁铁矿成分显示出越来越多的热液成因信息,地层物质(特别是膏盐层)对成矿过程起到了重要的控制作用。  相似文献   

15.
The Beiya gold–polymetallic deposit is one of the largest gold deposits in China and is considered to be a typical porphyry-skarn system located in the middle of the Jinshajiang–Ailaoshan alkaline porphyry metallogenic belt. Massive magnetite is widespread in the Beiya ore district but its genesis is still the subject of debate. Five representative magnetite types are present in the Beiya deposit, namely magmatic magnetite (M1) from the ore-related porphyry, disseminated magnetite (M2) from the early retrograde alteration, massive magnetite (M3) from the early quartz-magnetite stage, massive magnetite (M4) from the middle quartz-magnetite stage and magnetite (M5) from the late quartz-magnetite stage. Compared with the M1 magnetite, the magnetites from stages M2 to M5 are depleted in Ti, Al and high field strength elements, implying a hydrothermal origin, distinct from the magmatic accessory magnetite in the ore-related porphyry (M1). The concentrations of cobalt in the hydrothermal magnetites decrease gradually from M2 to M5, and can be used to discriminate the magnetite types. The Al + Mn and Ti + V contents of the successively precipitated magnetite grains (M2–M5) suggests that the ore forming temperature decreased from M2 to M4, but increased from M4 to M5, possibly as the result of a new pulse of magma entering the chamber, which may have triggered the gold mineralization. The V content in the hydrothermal magnetite suggests that the oxygen fugacity increased from M2 to M4 but decreased as soon as the sulfides entered the system (M5).  相似文献   

16.
The Eastern Tianshan Orogenic Belt of the Central Asian Orogenic Belt and the Beishan terrane of the Tarim Block, NW China, host numerous Fe deposits. The Cihai Fe deposit (>90 Mt at 45.6 % Fe) in the Beishan terrane is diabase-hosted and consists of the Cihai, Cinan, and Cixi ore clusters. Ore minerals are dominantly magnetite, pyrite, and pyrrhotite, with minor chalcopyrite, galena, and sphalerite. Gangue minerals include pyroxene, garnet, hornblende and minor plagioclase, biotite, chlorite, epidotite, quartz, and calcite. Pyrite from the Cihai and Cixi ore clusters has similar Re–Os isotope compositions, with ～14 to 62 ppb Re and ≤10?ppt common Os. Pyrrhotite has ～5 to 39 ppb Re and ～0.6 ppb common Os. Pyrite has a mean Re–Os model age of 262.3?±?5.6 Ma (n?=?13), in agreement with the isochron regression of 187Os vs. 187Re. The Re–Os age (～262 Ma) for the Cihai Fe deposit is within uncertainty in agreement with a previously reported Rb–Sr age (268?±?25 Ma) of the hosting diabase, indicating a genetic relationship between magmatism and mineralization. Magnetite from the Cihai deposit has Mg, Al, Ti, V, Cr, Co, Ni, Mn, Zn, Ga, and Sn more elevated than that of typical skarn deposits, but both V and Ti contents lower than that of magmatic Fe–Ti–V deposits. Magnetite from these two ore clusters at Cihai has slightly different trace element concentrations. Magnetite from the Cihai ore cluster has relatively constant trace element compositions. Some magnetite grains from the Cixi ore cluster have higher V, Ti, and Cr than those from the Cihai ore cluster. The compositional variations of magnetite between the ore clusters are possibly due to different formation temperatures. Combined with regional tectonic evolution of the Beishan terrane, the Re–Os age of pyrite and the composition of magnetite indicate that the Cihai Fe deposit may have derived from magmatic–hydrothermal fluids related to mafic magmatism, probably in an extensional rift environment.  相似文献   

17.
青海虎头崖地区多金属矿床成因类型的厘定及找矿方向   总被引：6，自引：0，他引：6  
祁漫塔格成矿带是青海省重要的铜多金属成矿区带,虎头崖地区铜铅锌矿床由虎头崖和迎庆沟两个相连矿区组成,近年来找矿取得了很大进展,但该区矿床成因类型尚有争议。通过详细的野外观察,从不同角度收集证据,厘定了矿床的成因类型:一是与印支期岩体、奥陶—志留系滩间山群、上石炭统缔敖组有关的热液型;二是与中元古界狼牙山组有关的喷流沉积-热液叠加改造型。同时,对矿床控矿因素进行了分析,并建立了找矿标志,以指导找矿。  相似文献   

18.
Wang  Yanjun  Zhu  Weiguang  Zhong  Hong  Bai  Zhongjie  Yao  Junhua  Xu  Chong 《中国地球化学学报》2019,38(3):376-390

The Pingchuan iron deposit, located in the Yanyuan region of Sichuan Province, SW China, has an ore reserve of 40 Mt with ~ 60 wt% Fe. Its genesis is still poorly understood. The Pingchuan iron deposit has a paragenetic sequence of an early Fe-oxide–Pyrite stage (I) and a late Fe-oxide–pyrrhotite stage (II). Stage I magnetite grains are generally fragmented, euhedral–subhedral, large-sized crystals accompanying with slightly postdated pyrite. Stage II magnetite grains are mostly unfragmented, anhedral, relatively small-sized grains that co-exist with pyrrhotite. Combined with micro-textural features and previously-obtained geochronological data, we consider that these two stages of iron mineralization in the Pingchuan deposit correspond to the Permian ELIP magmatism and Cenozoic fault activity event. Both the Stage I and II magnetites are characterized with overall lower contents of trace elements (including Cr, Ti, V, and Ni) than the ELIP magmatic magnetite, which suggests a hydrothermal origin for them. “Skarn-like” enrichment in Sn, Mn, and Zn in the Stage I magnetite grains indicate significant material contributions from carbonate wall-rocks due to water–rock interaction in ore-forming processes. Stage II magnetite grains contain higher Mn concentrations than Stage I magnetite grains, which possibly implies more contribution from carbonate rocks. In multiple-element diagrams, the Stage I magnetite shows systematic similarities to Kiruna-type magnetite rather than those from other types of deposits. Combined with geological features and previous studies on oxygen isotopes, we conclude that hydrothermal fluids have played a key role in the generation of the Pingchuan low-Ti iron deposit.

  相似文献   

19.
The Bayan Obo Fe-REE-Nb deposit in northern China is the world's largest light REE deposit, and also contains considerable amounts of iron and niobium metals. Although there are numerous studies on the REE mineralization, the origin of the Fe mineralization is not well known. Laser ablation (LA) ICP-MS is used to obtain trace elements of Fe oxides in order to better understand the process involved in the formation of magnetite and hematite associated with the formation of the giant REE deposit. There are banded, disseminated and massive Fe ores with variable amounts of magnetite and hematite at Bayan Obo. Magnetite and hematite from the same ores show similar REE patterns and have similar Mg, Ti, V, Mn, Co, Ni, Zn, Ga, Sn, and Ba contents, indicating a similar origin. Magnetite grains from the banded ores have Al + Mn and Ti + V contents similar to those of banded iron formations (BIF), whereas those from the disseminated and massive ores have Al + Mn and Ti + V contents similar to those of skarn deposits and other types of magmatic-hydrothermal deposits. Magnetite grains from the banded ores with a major gangue mineral of barite have the highest REE contents and show slight moderate REE enrichment, whereas those from other types of ores show light REE enrichment, indicating two stages of REE mineralization associated with Fe mineralization. The Bayan Obo deposit had multiple sources for Fe and REEs. It is likely that sedimentary carbonates provided original REEs and were metasomatized by REE-rich hydrothermal fluids to form the giant REE deposit.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号