共查询到20条相似文献，搜索用时 515 毫秒
1.
Wave-induced seabed instability in front of a breakwater 总被引：2，自引：0，他引：2
D.S. Jeng 《Ocean Engineering》1997,24(10):887-917
The wave-induced soil response in a porous seabed has become an important factor for the stability of offshore facilities, because many marine structures may have failed due to seabed instability and concomitant subsidence. An analytical solution is presented for the wave-induced soil response under the action of a three-dimensional wave system. Based on this general solution, the mechanism of seabed instability is then investigated. The general solutions for pore pressure and effective stresses are readily reducible to two dimensions for progressive waves, and are compared to theoretical and experimental work available. Some dominant factors affecting the wave-induced seabed instability are discussed; including permeability, seabed thickness and degree of saturation. 相似文献
2.
Response of a porous seabed around breakwater heads 总被引：1，自引：0，他引：1
The evaluation of wave-induced pore pressures and effective stresses in a porous seabed near a breakwater head is important for coastal engineers involved in the design of marine structures. Most previous studies have been limited to two-dimensional (2D) or three-dimensional (3D) cases in front of a breakwater. In this study, we focus on the problem near breakwater heads that consists of incident, reflected and diffracted waves. Both wave-induced oscillatory and residual liquefactions will be considered in our new models. The mistake in the previous work [Jeng, D.-S., 1996. Wave-induced liquefaction potential at the tip of a breakwater. Applied Ocean Research 18(5), 229–241] for oscillatory mechanism is corrected, while a new 3D boundary value problem describing residual mechanism is established. A parametric study is conducted to investigate the influences of several wave and soil parameters on wave-induced oscillatory and residual liquefactions around breakwater heads. 相似文献
3.
In this study, a mathematical integrated model is developed to investigate the wave-induced sloping seabed response in the vicinity of breakwater. In the present model, the wave model is based on the Volume-Averaged/Reynolds Averaged Navier–Stokes (VARANS) equations, while Biot's consolidation equation is used to govern the soil model. The influence of turbulence fluctuations on the mean flow with respect to the complicated interaction between wave, sloping seabed and breakwater are obtained by solving the Volume-Averaged k − ϵ model. Unlike previous investigations, the phase-resolved absolute shear stress is used as the source of accumulation of residual pore pressure, which can link the oscillatory and residual mechanisms simultaneously. Based on the proposed model, parametric studies regarding the effects of wave and soil characteristics as well as bed slopes on the wave-induced soil response in the vicinity of breakwater are investigated. Numerical results indicate that wave-induced seabed instability is more likely to occur in a steep slope in the case of soil with low relative density and low permeability under large wave loadings. It is also found that, the permeability of breakwater significantly affect the potential for liquefaction, especially in the region below the breakwater. 相似文献
4.
Most previous investigations related to composite breakwaters have focused on the wave forces acting on the structure itself from a hydrodynamic aspect. The foundational aspects of a composite breakwater under wave-induced cyclic loading are also important in studying the stability of a composite breakwater. In this study, numerical simulations were performed to investigate the wave-induced pore water pressure and flow changes inside the rubble mound of the composite breakwater and seabed foundation. The validity and applicability of the numerical model were demonstrated by comparing numerical results with existing experimental data. Moreover, the present model clearly has shown that the instantaneous directions of pore water flow motion inside the seabed induced by surface waves are in good agreement with the general wave-induced pore water flow inside the seabed. The model is further used to discuss the stability of a composite breakwater, i.e., the interaction among nonlinear waves, composite breakwater and seabed. Numerical results suggest that the stability of a composite breakwater is affected by not only downward shear flow generating on the seaward slope face of the rubble mound but, also, a high and dense pore water pressure gradient inside the rubble mound and seabed foundation. 相似文献
5.
Numerical study for waves propagating over a porous seabed around a submerged permeable breakwater: PORO-WSSI II model 总被引：1，自引：0，他引：1
The phenomenon of the wave, seabed and structure interactions has attracted great attentions from coastal geotechnical engineers in recent years. Most previous investigations have based on individual approaches, which focused on either flow region or seabed domain. In this study, an integrated model (PORO-WSSI II), based on the Volume-Averaged/Reynolds-Averaged Navier-Stokes (VARANS) equations and Biot's poro-elastic theory, is developed to investigate the mechanism of the wave-permeable structure-porous seabed interactions. The new model is verified with the previous experimental data. Based on the present model, parametric studies have been carried out to investigate the influences of wave, soil and structure parameters on the wave-induced pore pressure. Numerical results indicated: (i) longer wave period and larger wave height will obviously induce a higher magnitude of pore pressure at the leading edge of a breakwater; (ii) after a full wave-structure interaction, the magnitude of pore pressure below the lee side of a breakwater decreases with an increasing structure porosity while it varies dramatically with a change of structure height; and (iii) the seabed thickness, soil permeability and the degree of saturation can also significantly affect the dynamic soil behaviour. 相似文献
6.
Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth. 相似文献
7.
Models based on the theoretical framework of soil mechanics are presented to evaluate storm wave-induced silty seabed instability and geo-hazards through a case study in the Yellow River delta. First, the transient and residual mechanisms of wave-induced pore pressure are analyzed. Three typical models (i.e., elastic model, pore pressure development mode and elasto-plastic model) are proposed to calculate wave-induced stresses in the seabed. Next, mechanisms and calculation methods of wave-induced seabed instability modes such as scour, liquefaction, seepage instability and shear slide are proposed. Typical results of storm wave-induced excess pore pressure and seabed instability are given and relevant discussions are made. At last, the formation mechanism of geo-hazards in the Yellow River delta is analyzed based on the proposed mechanism and calculated results. Results and analysis indicate that both transient and residual mechanisms are important to storm wave-induced response of silty seabed and hence the elasto-plastic model is more appropriate. Complete liquefaction does not happen, while other types of instability occur mostly within 2–6 m under the seabed surface. Wave-induced scour, seepage instability and shear slide are all possible instability modes under the 1-year storm waves, and scour is predominant for the 50-year storm waves. The formation mechanism of geo-hazards such as shallow slide and storm wave reactivation, pockmarks, silt flow and gully, disturbed stratum and hard crust in the Yellow River are well explained based on the proposed mechanisms and calculated results of storm wave-induced silty seabed instability. 相似文献
8.
In this study, a new analytical solution for the wave-induced seabed response in a multi-layered poro-elastic seabed is developed. The seabed is treated as a multi-layered porous medium and characterized by Biot’s theory. The displacements of the solid skeleton and the pore pressure are expressed in terms of two scalar potentials and one vector. Then, the Biot’s dynamic equation can be solved using Fourier transformation and reducing to Helmholtz equations. To obtain the general solutions for the multi-layered poro-elastic seabed in the frequency-wave-number domain, the transmission and reflection matrices (TRM) method is used to form the equivalent stiffness. Using the boundary conditions and continuous conditions, the frequency-wave-number domain solutions are obtained. Finally, the time-space domain solutions for the multi-layered poro-elastic seabed are obtained by means of the inverse Fourier transformation with respect to the horizontal coordinate. Based on the new solution, a parametric study is carried out to examine the effects of soil characteristics (number of layers, permeability and shear modulus) and wave characteristics (water depth and wave steepness) on seabed responses. The results indicate that the seabed response is affected significantly by permeability, shear modulus and relative water depth. 相似文献
9.
This study examines the hydrodynamic performance of a wave absorbing double curtain-wall breakwater. The breakwater consists of a seaward perforated wall and a shoreward impermeable wall. Both walls extend from above the seawater to some distance above the seabed. Then the below gap allows the seawater exchange, the sediment transport and the fish passage. By means of the eigenfunction expansion method and a least square approach, a linear analytical solution is developed for the interaction of water waves with the breakwater. Then the reflection coefficient, the transmission coefficient and the wave forces acting on the walls are calculated. The numerical results obtained for limiting cases agree very well with previous predictions for a single partially immersed impermeable wall, the double partially immersed impermeable walls and the bottom-standing Jarlan-type breakwater. The predicted reflection coefficients for the present breakwater also agree reasonable with previous experimental results. Numerical results show that with appropriate structure parameters, the reflection and transmission coefficients of the breakwater may be both below 0.5 at a wide range of the relative water depth. At the same time, the magnitude of wave force acting on each wall is small. This is significant for practical engineering. 相似文献
10.
The topic of wave-seabed interaction is important for civil engineers with regard to stability analysis of foundations for offshore structures. Most previous investigations of such problems have simply assumed a seabed with uniform permeability, even if the evidence of variable permeability has been reported in the literature. This paper presents a finite-element model for investigating the wave-induced seabed response in a porous seabed, with variable permeability as a function of burial depth. The present finite formulation is established by using a combination of semi-analytical techniques and the Galerkin method. Based on the present numerical model, together with the Mohr-Coulomb failure criterion, the wave-induced seabed instability is estimated. The numerical results indicate that variable permeability affects the wave-induced seabed instability significantly, especially for gravelled seabeds. 相似文献
11.
Effects of dynamic soil behavior and wave non-linearity on the wave-induced pore pressure and effective stresses in porous seabed 总被引：1，自引：0，他引：1
Most previous investigations for the wave-induced soil response have only considered the quasi-static soil behavior under linear wave loading. However, it is expected that the dynamic soil behavior and wave non-linearity will play an important role in the evaluation of wave-induced seabed response. In this paper, we include dynamic soil behavior and wave non-linearity into new analytical models. Based on the analytical solution derived, the effects of wave non-linearity on the wave-induced seabed response with dynamic soil behavior are examined. Numerical results demonstrate the significant effects of wave non-linearity and dynamic soil behavior on the wave-induced effective stresses. The applicable range of dynamic and quasi-static approximations is also clarified for engineering practice. 相似文献
12.
The evaluation of the wave-induced liquefaction potential is particularly important for coastal engineers involved in the design of marine structures. Most previous investigations of the wave-induced liquefaction have been limited to two-dimensional non-breaking waves. In this paper, the integrated three-dimensional poro-elastic model for the wave-seabed interaction proposed by [Zhang, H., Jeng, D.-S., 2005. An integrated three-dimensional model of wave-induced pore pressure and effective stresses in a porous seabed: I. A sloping seabed. Ocean Engineering 32(5/6), 701–729.] is further extended to simulate the seabed liquefaction potential with breaking wave loading. Based on the parametric study, we conclude: (1) the liquefaction depth due to breaking waves is smaller than that of due to non-breaking waves; (2) the degree of saturation significantly affects the wave-induced liquefaction depth, and no liquefaction occurs in full saturated seabed, and (3) soil permeability does not only significantly affect the pore pressure, but also the shear stresses distribution. 相似文献
13.
Masoud Rabeti Moghadam Alireza Sadeghi Abdollahi 《Marine Georesources & Geotechnology》2017,35(3):376-396
Breakwaters provide a calm sea basin for ships and protect harbor facilities by reflecting wave energy toward the open sea area. Their performance under environmental loadings is the main concern for coastal engineers. Liquefaction susceptibility of loose sediments of seabed threatens performance of these structures. The article investigates soil liquefaction effects on the seismic performance of Iran liquefied natural gas (LNG) composite breakwater. Performance-based design method, considering both grade of the breakwater and acceptable level of damages, was selected as design philosophy. Liquefaction-induced damages to the breakwater were determined by numerical analysis. Since the obtained level of deformations did not meet allowable damages, soil improvement against liquefaction was considered. Different improvement patterns were proposed based on distribution of pore pressure ratio (ru) beneath the breakwater to control its seismic performance. This investigation revealed that the most important area for soil improvement is located near the toes of breakwater to control the slope instability and performance of the breakwater. 相似文献
14.
Dong-Sheng Jeng 《Ocean Engineering》1998,25(1):49-67
To simplify the complicated mathematical process, most previous investigations for the water waves-seabed interaction problem have assumed a porous seabed with isotropic soil behavior, even though strong evidence of anisotropic soil behavior has been reported in soil-mechanics literature. This paper proposes an analytical solution of the short-crested wave-induced soil response in a cross-anisotropic seabed. As shown in the numerical results presented, the wave-induced seabed response, including pore pressure, effective stresses and soil displacements, is affected significantly by the cross-anisotropic elastic constants. A parametric study is performed to clarify the relative differences in pore pressure between isotropic and cross-anisotropic solutions. 相似文献
15.
Wave-induced instability of seabed may cause damage to coastal and offshore structures. This issue has been investigated mostly for mildly sloping () seabed considering uncoupled or one-way coupled response of wave and seabed interaction. However, some of the marine structures are founded on seabed with steeper slopes. In this study, the wave-induced response and instability of sloping seabed are evaluated using a coupled finite element model. The interaction between fluid and porous seabed accounting for the effect of fluid motion on the seabed response, and conversely the effect of seabed response on the fluid motion (but not on the surface wave profile) is considered. The results indicate that the system response (fluid pressure, stresses, etc.) and the extent of instantaneously liquefied zone within the sloping seabed with significant steepness are lesser than those for horizontal seabed. Moreover, for typical sediment and wave characteristics, for the flat seabed, the response obtained from fully coupled analysis is not significantly different from those obtained by uncoupled analysis. For the sloping bed, such difference is slightly greater as compared to that for the flat bed. 相似文献
16.
The subject of the wave–seabed–structure interaction is important for civil engineers regarding stability analysis of foundations for offshore installations. Most previous investigations have been concerned with such a problem in the vicinity of a simple structure such as a vertical wall. For more complicated structures such as a pipeline, the phenomenon of the wave–seabed–structure has not been fully understood. This paper proposes a finite-difference model in a curvilinear coordinate system to investigate the wave-induced seabed response in a porous seabed around a pipeline. Based on the present numerical model, mechanism of the wave-induced soil response is examined. Employing Mohr–Coulomb failure criterion, the wave-induced seabed instability is also estimated. The numerical results indicate the importance of the effect of pipeline on the seabed response. 相似文献
17.
This paper provides a stochastic method by which the two-dimensional onshore scour characteristics along the base of submerged breakwaters exposed to normally incident random waves on both sloping and horizontal sandy seabed can be derived. Here the formulas for the regular wave-induced scour characteristics provided by Young and Testik (2009) are used. These formulas are combined with describing the waves as a stationary Gaussian narrow-band random process to derive the random wave-induced onshore scour characteristics; the maximum scour depth, the scour length, and the distance of the maximum scour depth location from the onshore breakwater face. An example of calculation is also provided. 相似文献
18.
波浪引起的海床不稳定性是海洋工程中需要考虑的重要问题。在对现有波致海床滑动稳定性计算方法进行分析的基础上,提出了一种波致海床滑动稳定性计算的全应力状态法,将其与现有计算方法进行了对比分析,并进一步研究了波致砂土海床和软土海床的滑动失稳特征。结果分析表明,全应力状态法在波致海床滑动稳定性分析中具有较好的适用性。对于砂土海床,其滑动稳定性受饱和度的影响较大,且当海床计算厚度约为0.2倍波长时对应的滑动深度最大。波浪作用下坡度不超过2°的均质软土海床,其最危险滑动面的位置仅与波长有关,其滑动深度约为0.21倍波长,滑动面半弦长约为0.33倍波长;海床表面的波压力数值只影响其安全系数的大小,而不影响其滑动深度。 相似文献
19.
多消浪室局部开孔沉箱防波堤反射特性的迭代解析研究 总被引：1，自引：0，他引：1
基于势流理论，对多消浪室局部开孔沉箱防波堤的反射特性进行解析研究。研究中采用开孔墙处的二次压力损失边界条件，可以直接考虑波高对于开孔墙处能量损失的影响。利用匹配特征函数展开法和迭代方法得到当前问题的解析解。收敛性验证表明，迭代计算和级数解均具有良好的收敛性。该解析解的计算结果与分区边界元的数值计算结果一致，并且与已有的试验结果符合良好。通过算例分析，研究开孔沉箱防波堤反射系数的主要影响因素。结果表明：与单消浪室开孔沉箱防波堤相比，多消浪室开孔沉箱防波堤可以在更宽的波浪频率范围内保持低反射；增大开孔墙的开孔率，有利于降低多消浪室开孔沉箱防波堤的反射系数；当开孔墙的开孔率沿着入射波方向依次递减时，多消浪室开孔沉箱防波堤的反射系数较小。本文所建立的解析模型简单可靠，可用于工程初步设计中分析开孔沉箱防波堤的水动力性能。 相似文献
20.
To simulate the wave-induced response of coupled pore fluids and a solid skeleton in shallow water, a set of solutions with different formulations (fully dynamic, partly dynamic, and quasi-static) corresponding to each soil behavior assumption is presented. To deal with Jacobian elliptic functions involved in the cnoidal theory, a Fourier series approximation is adopted for expanding the boundary conditions on the seabed surface. The parametric study indicates the significant effect of nonlinearity for shallow water wave, which also enhances the effect of soil characteristics. The investigation of the applicability of reduced formulations reveals the necessity of a partly or even fully dynamic formulation for the wave-induced seabed response problem in shallow water, especially for thickened seabed. The analysis of liquefaction in the seabed indicates that the maximum depth of liquefaction is shallower, and the width of liquefaction is broader under cnoidal wave loading. The present analytical model can provide more reasonable result for the wave-induced seabed response in the range of shallow water wave. 相似文献