共查询到20条相似文献，搜索用时 125 毫秒
1.
2.
3.
建立了适合于带暗支撑剪力墙非线性分析的宏观单元模型,分别用带斜杆的多垂直杆单元模型和模拟框架单元模型对2个带暗支撑剪力墙进行了静力弹塑性分析,给出了模拟框架单元模型的刚度矩阵和杆件非线性力-变形关系,对两种不同单元模型的计算结果进行了对比,结果表明该两种模型能够较好反映带暗支撑剪力墙的弹性和塑性阶段的受力特点。 相似文献
4.
框架—剪力墙型结构的非线性随机地震反应和可靠性分析 总被引：11，自引：3，他引：11
框架-剪力墙结构在地震载荷作用下的非线性特性及其描述以及非线性随机反应分析是很复杂的。本文对剪力墙建议了一个能反映其主要弯曲和剪切非线性特性的简化模型,据此模型提出了框架-剪力墙结构非线性随机地震反应分析的等效线性化方法和以变形极限状态概率表示的地震可靠性分析方法,该方法比较简便实用,可用于剪力墙和框架-剪力墙型结构体系的非线性随机地震反应分析和可靠性分析。 相似文献
5.
为研究钢筋砼磨擦耗能支撑框架结构的动力反应性能，对其中的磨擦耗能器单元和框加杆单元的单元刚度和力学模型做了分析。钢筋砼磨擦耗能支撑单元由支撑杆单元和钢板－橡胶磨擦耗能器单元组成，支撑单元可取空间杆单元，磨擦耗能器单元为平面应力矩形单元。磨擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线，根据耗能器单元的力学模型，可确定其在每一时刻的刚度；框架结构空间杆单元的恢复力模型采用双线型模型，根据杆单元的力学模型，可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支持框架在地震作用下进行了弹塑性反应时程分析，结果表明耗能支撑框架的顶层最大位移明显小于普通框架。 相似文献
6.
针对钢筋混凝土高层框支剪力墙结构抗震性能差的缺点,提出采用型钢混凝土（SRC）梁柱框支剪力墙,试验结果表明了其良好的抗震性能。提出了框支剪力墙结构地震反应简化分析模型,将结构简化为由墙单元和框支单元组成的弹簧体系,墙单元采用二元件模型。推导了框支单元刚度矩阵,基于理论公式和试验结果给出了框支单元恢复力模型。根据提出的简化模型,编制了结构地震反应时程分析程序。程序计算结果与ETABS分析结果及振动台试验结果吻合较好,为进一步对SRC框支剪力墙结构进行地震反应分析提供了理论基础。 相似文献
7.
多垂直杆单元模型是在钢筋混凝土剪力墙非线性分析中较为常用的一种宏观模型。现有的分析方法不能考虑翼板剪滞效应的影响,然而翼板上正应力非均匀分布必然影响剪力墙承载力的充分发挥。其次现有的分析方法大多不能较好地考虑垂直杆中正应力对剪切刚度的影响。本文在多垂直杆单元模型的基础上进行改进,把垂直杆的轴向刚度和剪切刚度相结合,并引入剪滞位移自由度,摒弃平截面假定的限制,对一工程结构模型的静力分析显示其变形状态符合受力机理,对3片短肢剪力墙模型和1片剪力墙模型进行弹塑性静力加载分析,计算结果与试验结果吻合较好,表明该方法应用可行。 相似文献
8.
本文提出了基于超级单元的钢框架－混凝土剪力墙结构体系动力特性及地震反应分析的一种方法，该方法考虑了混合结构体系中钢框架部分的受力和变形特点，即节点柔性（半刚性）、梁柱效应（p-δ效应）及P－△效应（以下合称P－Delta效应），推导了考虑三种因素情况下，钢框架的层间侧移刚度及钢框架－混凝土剪力墙结构体系的超级单元刚度矩阵，采用刚度法求解钢框架－混凝土混合结构周期和振型。该方法物理概念清楚，计算简便。 相似文献
9.
摩擦消能支撑装置非线性刚度分析 总被引：2，自引：0，他引：2
多层建筑结构中设置摩擦消能支撑是以“柔性消能”减小地震反应，实现结构被动控制的有效途径之一，本文通过分析和计算I0型，IIb型两种摩擦消能支撑装置在各种形状态下的单元刚度矩阵[KNL(t)]，为摩消能减震结构体系在地震作用下的非线性进程分析提供了消能支撑单元的精确理论模型。 相似文献
10.
11.
Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications. 相似文献
12.
Accuracy of nonlinear static procedures for the seismic assessment of shear critical structures 
下载免费PDF全文
下载免费PDF全文 The nonlinear behavior of reinforced concrete (RC) members represents a key issue in the seismic performance assessment of structures. Many structures constructed in the 1980s or earlier were designed based on force limits; thus they often exhibit brittle failure modes, strength and stiffness degradation, and severe pinching effects. Field surveys and experimental evidence have demonstrated that such inelastic responses affect the global behavior of RC structural systems. Efforts have been made to consider the degrading stiffness and strength in the simplified nonlinear static procedures commonly adopted by practitioners. This paper investigates the accuracy of such procedures for the seismic performance assessment of RC structural systems. Refined finite element models of a shear critical bridge bent and a flexure‐critical bridge pier are used as reference models. The numerical models are validated against experimental results and used to evaluate the inelastic dynamic response of the structures subjected to earthquake ground motions with increasing amplitude. The maximum response from the refined numerical models is compared against the results from the simplified static procedures, namely modified capacity spectrum method and coefficient method in FEMA‐440. The accuracy of the static procedures in estimating the displacement demand of a flexure‐critical system and shear‐critical system is discussed in detail. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
13.
不同连梁跨高比带暗支撑双肢剪力墙抗震性能试验研究 总被引：2，自引：0，他引：2
为探讨不同连梁跨高比带暗支撑双肢剪力墙的抗震性能,进行了2组连梁跨高比分别为1．0和1．5的4个4层双肢剪力墙1／4缩尺模型的抗震性能试验研究。较系统地分析了结构的刚度及其退化过程以及承载力、延性、耗能、破坏机制和破坏特征等。结果表明,连梁跨高比相对小的带暗支撑双肢剪力墙抗震性能较好。承载力计算结果与实测值符合较好。 相似文献
14.
为了建立统一的动力响应分析模型,本文以NUPEC振动台试验的H形断面钢筋混凝土立体剪力墙为研究对象进行了三维非线性有限元动力响应分析。根据分析结果与试验结果的比较可知,在RC剪力墙到达最大承载力之前由简化模型和一般模型得到的动力响应特性与试验结果吻合较好,荷载-变形关系能很好模拟试验结果。但是,最大承载力之后,由于混凝土开裂、损伤、劣化的急剧发展,较难模拟混凝土开裂、裂缝的开闭及滑移等非线性特性,分析得到的加速度衰减较慢、位移响应较小。基于上述研究成果探讨并提出了进一步改善非线性有限元动力响应分析精度的建议。 相似文献
15.
改善混凝土剪力墙抗震性能的研究 总被引：1，自引：0，他引：1
李广山 《地震工程与工程振动》2006,26(5):125-128
混凝土剪力墙被广泛运用于各类结构体系中。它作为主要的抗侧力单元,其刚度大、承载力高,但当剪力墙以受剪破坏为主时,其抗震性能较差。为此,不少学者提出了各种改善混凝土剪力墙抗震性能的措施。本文对几种采用不同构造措施的剪力墙作了简要介绍,特别是介绍一种新型双重组合剪力墙。 相似文献
16.
进行了3个1∶4缩尺的四层双肢剪力墙模型抗震性能的对比试验,连梁跨高比为1.5。模型1为普通混凝土双肢剪力墙,模型2为全再生混凝土双肢剪力墙,模型3为底部两层普通混凝土、上部两层再生混凝土双肢剪力墙。分析了各双肢剪力墙的承载力、延性、刚度、滞回特性、耗能及破坏特征。结果表明:与普通混凝土双肢剪力墙相比,全再生混凝土双肢剪力墙的抗震性能略差,底部两层普通混凝土、上部两层再生混凝土的双肢剪力墙与普通混凝土双肢剪力墙抗震性能接近。建立了再生混凝土双肢剪力墙的承载力计算模型,计算结果与试验结果吻合较好。 相似文献
17.
双向单排配筋混凝土低矮剪力墙抗震性能试验研究 总被引：6，自引：2，他引：4
双向单排配筋混凝土低矮剪力墙适用于多层住宅结构。对4个原型的剪跨比为1.0配筋混凝土低矮剪力墙进行了低周反复荷载试验研究,包括1个双向双排配筋混凝土低矮剪力墙和3个双向单排配筋混凝土低矮剪力墙。其中1个双向单排配筋混凝土低矮剪力墙加设暗支撑,用以研究暗支撑对这种新型墙体的作用。在试验研究的基础上,对比分析了各剪力墙的刚度及其衰减过程、承载力、延性、滞回特征、耗能能力及破坏特征。试验表明,经过合理设计,这种双向单排配筋混凝土低矮剪力墙可以满足多层住宅结构抗震要求。 相似文献
18.
带暗支撑双肢短肢剪力墙抗震性能试验研究 总被引：4，自引：1，他引：4
钢筋混凝土短肢剪力墙结构是一种新型的中高层住宅结构体系,已有较多的工程应用,但是短肢剪力墙的抗震性能较差,如何提高短肢剪力墙的抗震性能是目前工程界十分关注的问题。本文提出了带暗支撑短肢剪力墙,并以典型的双肢短肢剪力墙为例,选择了4个1/3缩尺的双肢短肢剪力墙试验模型,2个为普通双肢短肢剪力墙模型,2个为带暗支撑双肢剪力墙模型,进行了对比性的抗震性能试验研究,较系统地分析了带暗支撑双肢短肢剪力墙的承载力、刚度、延性、耗能能力及破坏特征,建立了承载力计算模型,计算结果与实测结果符合较好。试验表明,带暗支撑双肢短肢剪力墙的抗震能力比普通双肢短肢剪力墙显著提高。 相似文献
19.
Dionysis Biskinis Michael N. Fardis Apostolos Psaros-Andriopoulos 《Bulletin of Earthquake Engineering》2016,14(3):769-803
In seismic retrofitting of concrete buildings, frame bays are converted into reinforced concrete (RC) walls by infilling the space between the frame members with RC of a thickness of not more than their width. The cyclic behavior of the resulting wall depends on the connection between the RC infill and the surrounding RC members. The paper uses the results from 56 cyclic tests on such composite walls to express their properties in terms of the geometry, the reinforcement and the connection. Properties addressed are: (a) the yield moment at the story base; (b) the secant-to-yield-point stiffness over the shear span of the wall in a story; (c) the deflection at flexural failure in cyclic loading; (d) the cyclic shear resistance, including a sliding shear failure mode. Separate models are given for squat walls failing in shear and for those where the top of the column shears-off. The proposals are modifications of models developed in the past for monolithic RC walls from several hundred cyclic tests; blind application of these latter models as though the walls were monolithic gives, in general, unsafe predictions. By contrast, the diagonal compression strut approach in ASCE41-06 is safe-sided, but gives unacceptably large prediction scatter. 相似文献
20.
本文提出了抗震耗能剪力墙结构的新型式，新型剪力墙的墙板中人为地设置了竖缝，并在竖缝中设置各种型式的耗能装置来控制结构的动力性能，如：结构的侧向刚度、延性、自振频率等，为了验证这一设想，本文进行了两个１０带层竖缝剪力墙模型的振动台试验，通过试验数据分析和结构非线性动力反应计算分析对两个模型的抗震性能进行了研究。 相似文献