首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Miocene submarine basanite pillows, lava lobes, megapillows and sheet lavas in the Stanley Peninsula, northwestern Tasmania, Australia, are well-preserved in three dimensions. The pillows have ropy wrinkles, transverse wrinkles, symmetrical wrinkles, contraction cracks and three types of spreading cracks on their surfaces, and concentric and radial joints in the interior. The lava lobes have ropy wrinkles and contraction cracks on their surfaces. The megapillows are cylindrical with a smoothly curved upper surface and steep sides, and are characterized by distinct radial columnar joints in the interior. They are connected to pillows that propagate radially from its basal margin. The sheet lavas are tabular and have vertical columnar joints in the interior. The largest sheet lava shows a remarkable gradation from a lower 5-m-thick pillow facies to an upper massive facies. The pillows, lava lobes, megapillows and sheet lavas are inferred to have been emplaced completely below sea level but in a shallow marine environment. Their morphological features suggest that the pillows grew by episodic rupture of a near-solid crust and emergence of hot lava, whereas the lava lobes propagated by continuous stretching of the outer skin at the flow front. The megapillows and sheet lavas were master feeder channels by which molten lava was conveyed to the advancing pillows. The sheet lavas propagated by repeated processes of pillow formation and overriding by an upper massive part. Alternating pillow and massive facies commonly found in ocean-floor drill cores and exposed in cross-section in many subaqueous volcanic successions may have formed by propagation of pillows from the basal margins of advancing sheet lavas.  相似文献   

2.
At Rakiraki in northeastern Viti Levu, the Pliocene Ba Volcanic Group comprises gently dipping, pyroxene-phyric basaltic lavas, including pillow lava, and texturally diverse volcanic breccia interbedded with conglomerate and sandstone. Three main facies associations have been identified: (1) The primary volcanic facies association includes massive basalt (flows and sills), pillow lava and related in-situ breccia (pillow-fragment breccia, autobreccia, in-situ hyaloclastite, peperite). (2) The resedimented volcaniclastic facies association consists of bedded, monomict volcanic breccia and scoria lapilli-rich breccia. (3) The volcanogenic sedimentary facies association is composed of bedded, polymict conglomerate and breccia, together with volcanic sandstone and siltstone-mudstone facies. Pillow lava and coarse hyaloclastite breccia indicate a submarine depositional setting for most of the sequence. Thick, massive to graded beds of polymict breccia and conglomerate are interpreted as volcaniclastic mass-flow deposits emplaced below wave base. Well-rounded clasts in conglomerate were reworked during subaerial transport and/or temporary storage in shoreline or shallow water environments prior to redeposition. Red, oxidised lava and scoria clasts in bedded breccia and conglomerate also imply that the source was partly subaerial. The facies assemblage is consistent with a setting on the submerged flanks of a shoaling basaltic seamount. The coarse grade and large volume of conglomerate and breccia reflect the high supply rate of clasts, and the propensity for collapse and redeposition on steep palaeoslopes. The clast supply may have been boosted by vigorous fragmentation processes accompanying transition of lava from subaerial to submarine settings. The greater proportion of primary volcanic facies compared with resedimented volcaniclastic and volcanogenic sedimentary facies in central and northwestern exposures (near Rakiraki) indicates they are more proximal than those in the southeast (towards Viti Levu Bay). The proximal area coincides with one of two zones where NW-SE-trending mafic dykes are especially abundant, and it is close to several, small, dome-like intrusions of intermediate and felsic igneous rocks. The original surface morphology of the volcano is no longer preserved, though the partial fan of bedding dip azimuths in the south and east and the wide diameter (exceeding 20 km) are consistent with a broad shield.  相似文献   

3.
An eruption along a 2.5 km-long rhyolitic dyke at Krafla volcano, northern Iceland during the last glacial period formed a ridge of obsidian (Hrafntinnuhryggur). The ridge rises up to 80 m above the surrounding land and is composed of a number of small-volume lava bodies with minor fragmental material. The total volume is < 0.05 km3. The lava bodies are flow- or dome-like in morphology and many display columnar-jointed sides typical of magma–ice interaction, quench-fragmented lower margins indicative of interaction with meltwater and pumiceous upper surfaces typical of subaerial obsidian flows. The fragmental material compromises poorly-sorted perlitic quench hyaloclastites and poorly-exposed pumiceous tuffs. Lava bodies on the western ridge flanks are columnar jointed and extensively hydrothermally altered. At the southern end of the ridge the feeder dyke is exposed at an elevation  95 m beneath the ridge crest and flares upwards into a lava body.Using the distribution of lithofacies, we interpret that the eruption melted through ice only 35–55 m thick, which is likely to have been dominated by firn. Hrafntinnuhryggur is therefore the first documented example of a rhyolitic fissure eruption beneath thin ice/firn. The eruption breached the ice, leading to subaerial but ice/firn-contact lava effusion, and only minor explosive activity occurred. The ridge appears to have been well-drained during the eruption, aided by the high permeability of the thin ice/firn, which appears not to have greatly affected the eruption mechanisms. We estimate that the eruption lasted between 2 and 20 months and would not have generated a significant jökulhlaup (< 70 m3 s− 1).  相似文献   

4.
The lava section in the Troodos ophiolite, Cyprus, is chemically stratified and divided into a shallow lava sequence with low TiO2 content and a deeper lava sequence with high TiO2 content. We calculate the viscosity at magmatic temperature based on major element chemistry of lavas in Cyprus Crustal Study Project (CCSP) Holes CY-1 and 1A. We find that typical shallow low-Ti lavas have a magmatic viscosity that is two to three orders of magnitude lower than that of the deeper high-Ti lavas. This implies that, after eruption on-axis, Troodos low-Ti lavas would have been able to flow down the same slope faster and farther than high-Ti lavas. The calculated lava viscosity increases systematically from the lava-sediment interface to the bottom of the composite Hole CY-1/1A. This suggests that an efficient process of lava segregation by viscosity on the upper flanks of the paleo Troodos rise may have been responsible for the chemical stratification in the Troodos lava pile. Calculated magmatic temperature and molar Mg/(Mg+Fe), or Mg#, decrease systematically down-section, while SiO2 content increases. Correlation of Mg# in the lavas with Mg# in the underlying, lower crustal plutonic rocks sampled by CCSP Hole CY-4 shows that the shallow lavas came from a high-temperature, lower crustal magma reservoir which is now represented by high-Mg# pyroxenite cumulates, while the deeper lavas were erupted from a lower-temperature, mid-crustal reservoir which is now represented by gabbroic cumulates with lower Mg#.  相似文献   

5.
Rejuvenated-stage tuff cones (Honolulu Volcanics) on Koolau volcano, Oahu, Hawaii, contain xenoliths of Koolau shield basalt. Because Koolau subaerial shield lavas represent a Hawaiian geochemical 'end member', and submarine shield lavas have compositions with some affinities to Mauna Loa and Kilauea, we analyzed 28 xenolithic basalts from Salt Lake and Koko Head cones to determine how these seemingly random samplings of the Koolau profile compare to established Koolau geochemistry. Analyses reveal that 24 are shield tholeiitic basalt—the focus of this study—and 4 are rejuvenated-stage basaltic rocks. The tholeiitic xenoliths represent largely upper Koolau shield lavas, as these samples (8.3 to 5.8 wt% MgO) have, with one exception, overall major- and trace-element compositions that overlap those of Koolau subaerial shield lavas. Secondary processes, however, created some distinctions—namely, enrichments/depletions in K, Ba, Sr, SiO2, and FeO, and, due to zeolitization (chabazite with attending okenite and apophyllite), elevated CaO. One xenolithic basalt with 8.2 wt% MgO has higher Ti, Zr, Nb, and Sc, and lower Zr/Nb than subaerial lavas, and appears to represent relatively early, deeper shield—thereby reinforcing that the Koolau shield source varied temporally. Olivine, orthopyroxene, and plagioclase are the phenocrysts (clinopyroxene is rare), and their core compositions range widely across the suite—Fo87.8–72, orthopyroxene Mg#s 85–72, and An74–60. Several xenolithic basalts have both normally and reversely zoned orthopyroxene and plagioclase with a variety of core compositions (e.g., orthopyroxene-core Mg#s 82, 77, and 72, all in one sample). These compositions and zonations record evidence for wide compositional ranges of replenishment (MgO ~13–8 wt%) and reservoir (MgO ~7 to <5 wt%) magmas mixing in varying proportions; however, extreme MgO lavas (~13 and <5 wt%) are not observed as either subaerial or xenolithic basalt, but are indicated by phenocryst cores of Fo87.8 and orthopyroxene-Mg# 72. The Koolau magma-mixing history resembles that of Kilauea, and is unlike the 'steady-state' mixing known for Mauna Loa. Finally, these basalt samples show that any xenolithic occurrence of Koolau lava is subject to the zeolitization prevalent in the tuff-cone hosts.Editorial handling: M. Carroll  相似文献   

6.
The volcanic island of Milos, Greece, comprises an Upper Pliocene –Pleistocene, thick (up to 700 m), compositionally and texturally diverse succession of calc-alkaline, volcanic, and sedimentary rocks that record a transition from a relatively shallow but dominantly below-wave-base submarine setting to a subaerial one. The volcanic activity began at 2.66±0.07 Ma and has been more or less continuous since then. Subaerial emergence probably occurred at 1.44±0.08 Ma, in response to a combination of volcanic constructional processes and fault-controlled volcano-tectonic uplift. The architecture of the dominantly felsic-intermediate volcanic succession reflects contrasts in eruption style, proximity to source, depositional environment and emplacement processes. The juxtaposition of submarine and subaerial facies indicates that for part of the volcanic history, below-wave base to above-wave base, and shoaling to subaerial depositional environments coexisted in most areas. The volcanic facies architecture comprises interfingering proximal (near vent), medial and distal facies associations related to five main volcano types: (1) submarine felsic cryptodome-pumice cone volcanoes; (2) submarine dacitic and andesitic lava domes; (3) submarine-to-subaerial scoria cones; (4) submarine-to-subaerial dacitic and andesitic lava domes and (5) subaerial lava-pumice cone volcanoes. The volcanic facies are interbedded with a sedimentary facies association comprising sandstone and/or fossiliferous mudstone mainly derived from erosion of pre-existing volcanic deposits. The main facies associations are interpreted to have conformable, disconformable, and interfingering contacts, and there are no mappable angular unconformities or disconformities within the volcanic succession.Electronic Supplementary Material Supplementary material is available for this article at  相似文献   

7.
Detailed mapping of Tok Island, located in the middle of the East Sea (Sea of Japan), along with lithofacies analysis and K-Ar age determinations reveal that the island is of early to late Pliocene age and comprises eight rock units: Trachyte I, Unit P-I, Unit P-II, Trachyandesite (2.7±0.1 Ma), Unit P-III, Trachyte II (2.7±0.1 Ma), Trachyte III (2.5±0.1 Ma) and dikes in ascending stratigraphic order. Trachyte I is a mixture of coherent trachytic lavas and breccias that are interpreted to be subaqueous lavas and related hyaloclastites. Unit P-I comprises massive and inversely graded basaltic breccias which resulted from subaerial gain flows and subaqueous debris flows. A basalt clast from the unit, derived from below Trachyte I, has an age of 4.6±0.4 Ma. Unit P-II is composed of graded and stratified lapilli tuffs with the characteristics of proximal pyroclastic surge deposits. The Trachyandesite is a massive subaerial lava ponded in a volcano-tectonic depression, probably a summit crater. A pyroclastic sequence containing flattened scoria clasts (Unit P-III) and a small volume subaerial lava (Trachyte II) occur above the Trachyandesite, suggesting resumption of pyroclastic activity and lava effusion. Afterwards, shallow intrusion of magma occurred, producing Trachyte III and trachyte dikes.The eight rock units provide an example of the changing eruptive and depositional processes and resultant succession of lithofacies as a seamount builds up above sea level to form an island volcano: Trachyte I represents a wholly subaqueous and effusive stage; Units P-I and P-II represent Surtseyan and Taalian eruptive phases during an explosive transitional (subaqueous to emergent) stage; and the other rock units represent later subaerial effusive and explosive stages. Reconstruction of volcano morphology suggests that the island is a remnant of the south-western crater rim of a volcano the vent of which lies several hundred meters to the north-east.  相似文献   

8.
Lava flowing into a pit crater will become entrapped to form an inactive lava lake. At Masaya volcano (Nicaragua) pit filling lavas are exposed in the walls of Nindiri, Santiago and San Pedro pits. Mapping of these lavas shows that fill can involve emplacement of both ’a’a and pahoehoe, with single fill units ranging in thickness from 2 to 22 m. Thick units with columnar joints were emplaced as simple inactive lava lakes during high effusion rate episodes. Sequences of thinner units, which can form pit floor shields or compound lakes, were emplaced at lower effusion rates. Lava withdrawal caused unsupported sections of three 20-m-thick units to subside, resulting in unit flexure and faulting, and viscous peeling features reveal that subsidence occurred while at least one unit was still partially molten. Where withdrawal has not occurred, fill sequences are flat lying and symmetrically distributed around the feeder structures (cinder cones and dykes). The filled Nindiri pit holds 5 × 107 m3 of lava in a 215-m-thick sequence. Partial fill of Santiago pit with 1 × 107 m3 of lava has filled the pit with a 110-m-thick lava sequence, of which ∼50% has been consumed by formation of a secondary pit. Altogether, 6.4 × 107 m3 of lava was erupted into Nindiri and Santiago during 1525–1965, with 94% of this volume remaining pit-contained; the remainder forms a north flank lava flow field. Pit development and filling is a dynamic and ephemeral process, having short-lived effects on volcano morphology, where pits develop and fill over hours-to-centuries. However, pits play an important role in shaping an edifice, representing lava sinks and controlling whether lavas are trapped or able to spread onto the flanks.  相似文献   

9.
A Pleistocene subaqueous, volcanic sequence in South Iceland consists of flows of basaltic hyaloclastite and lava with interbedded sedimentary diamictite units. Emplacement occurred on a distal submarine shelf in drowned valleys along the southern coast of Iceland. The higher sea level was caused by eustatic sea-level change, probably towards the end of a glaciation. This sequence, nearly 700 m thick, rests unconformably on eroded flatlying lavas and sedimentary rocks of likely Tertiary age. A Standard Depositional Unit, describing the flows of hyaloclastite, starts with compact columnar-jointed basalt overlain by cubejointed basalt, and/or pillow lava. This in turn is overlain by thick unstructured hyaloclastite containing aligned basalt lobes, and bedded hyaloclastite at the top. A similar lithofacies succession is valid for proximal to distal locations. The flows were produced by repeated voluminous extrusions of basaltic lava from subaquatic fissures on the Eastern Rift Zone of Iceland. The fissures are assumed to lie in the same general area as the 1783 Laki fissure which produced 12 km3 of basaltic lava. Due to very high extrusion rates, the effective water/melt ratio was low, preventing optimal fragmentation of the melt. The result was a heterogeneous mass of hyaloclastite and fluid melt which moved en masse downslope with the melt at the bottom of the flow and increasingly vesicular hyaloclastite fragments above. The upper and distal parts of the flow moved as low-concentration turbulent suspensions that deposited bedded hyaloclastite.  相似文献   

10.
The ca. 8800 14C yrs BP Sulphur Creek lava flowed eastward 12 km from the Schriebers Meadow cinder cone into the Baker River valley, on the southeast flank of Mount Baker volcano. The compositionally-zoned basaltic to basaltic andesite lava entered, crossed and partially filled the 2-km-wide and > 100-m-deep early Holocene remnant of Glacial Lake Baker. The valley is now submerged beneath a reservoir, but seasonal drawdown permits study of the distal entrant lava. As a lava volume that may have been as much as 180 × 106 m3 entered the lake, the flow invaded the lacustrine sequence and extended to the opposite (east) side of the drowned Baker River valley. The volume and mobility of the lava can be attributed to a high flux rate, a prolonged eruption, or both. Basalt exposed below the former level of the remnant glacial lake is glassy or microcrystalline and sparsely vesicular, with pervasive hackly or blocky fractures. Together with pseudopillow fractures, these features reflect fracturing normal to penetrative thermal fronts and quenching by water. A fine-grained hyaloclastite facies was probably formed during quench fragmentation or isolated magma-water explosions. Although the structures closely resemble those developed in lava-ice contact environments, establishing the depositional environment for lava exhibiting similar intense fracturing should be confirmed by geologic evidence rather than by internal structure alone. The lava also invaded the lacustrine sequence, forming varieties of peperite, including sills that are conformable within the invaded strata and resemble volcaniclastic breccias. The peperite is generally fragmental and clast- or matrix-supported; fine-grained and rounded fluidal margins occur locally. The lava formed a thickened subaqueous plug that, as the lake drained in the mid-Holocene, was exposed to erosion. The Baker River then cut a 52-m-deep gorge through the shattered, highly erodible basalt.  相似文献   

11.
Sinker Butte is the erosional remnant of a very large basaltic tuff cone of middle Pleistocene age located at the southern edge of the western Snake River Plain. Phreatomagmatic tephras are exposed in complete sections up to 100 m thick in the walls of the Snake River Canyon, creating an unusual opportunity to study the deposits produced by this volcano through its entire sequence of explosive eruptions. The main objectives of the study were to determine the overall evolution of the Sinker Butte volcano while focusing particularly on the tephras produced by its phreatomagmatic eruptions. Toward this end, twenty-three detailed stratigraphic sections ranging from 20 to 100 m thick were examined and measured in canyon walls exposing tephras deposited around 180° of the circumference of the volcano.Three main rock units are recognized in canyon walls at Sinker Butte: a lower sequence composed of numerous thin basaltic lava flows, an intermediate sequence of phreatomagmatic tephras, and a capping sequence of welded basaltic spatter and more lava flows. We subdivide the phreatomagmatic deposits into two main parts, a series of reworked, mostly subaqueously deposited tephras and a more voluminous sequence of overlying subaerial surge and fall deposits. Most of the reworked deposits are gray in color and exhibit features such as channel scour and fill, planar-stratification, high and low angle cross-stratification, trough cross-stratification, and Bouma-turbidite sequences consistent with their being deposited in shallow standing water or in braided streams. The overlying subaerial deposits are commonly brown or orange in color due to palagonitization. They display a wide variety of bedding types and sedimentary structures consistent with deposition by base surges, wet to dry pyroclastic fall events, and water saturated debris flows.Proximal sections through the subaerial tephras exhibit large regressive cross-strata, planar bedding, and bomb sags suggesting deposition by wet base surges and tephra fallout. Medial and distal deposits consist of a thick sequence of well-bedded tephras; however, the cross-stratified base-surge deposits are thinner and interbedded within the fallout deposits. The average wavelength and amplitude of the cross strata continue to decrease with distance from the vent. These bedded surge and fall deposits grade upward into dominantly fall deposits containing 75–95% juvenile vesiculated clasts and localized layers of welded spatter, indicating a greatly reduced water-melt ratio. Overlying these “dryer” deposits are massive tuff breccias that were probably deposited as water saturated debris flows (lahars). The first appearance of rounded river gravels in these massive tuff breccias indicates downward coring of the diatreme and entrainment of country rock from lower in the stratigraphic section. The “wetter” nature of these deposits suggests a renewed source of external water. The massive deposits grade upward into wet fallout tephras and the phreatomagmatic sequence ends with a dry scoria fall deposit overlain by welded spatter and lava flows.Field observations and two new 40Ar–39Ar incremental heating dates suggest the succession of lavas and tephra deposits exposed in this part of the Snake River canyon may all have been erupted from a closely related complex of vents at Sinker Butte. We propose that initial eruptions of lava flows built a small shield edifice that dammed or disrupted the flow of the ancestral Snake River. The shift from effusive to explosive eruptions occurred when the surface water or rising ground water gained access to the vent. As the river cut a new channel around the lava dam, water levels dropped and the volcano returned to an effusive style of eruption.  相似文献   

12.
Emplacement of a giant submarine slide complex, offshore of South Kona, Hawaii Island, was investigated in 2001 by visual observation and in-situ sampling on the bench scarp and a megablock, during two dives utilizing the Remotely Operated Vehicle (ROV) Kaiko and its mother ship R/V Kairei. Topography of the bench scarp and megablocks were defined in 3-D perspective, using high-resolution digital bathymetric data acquired during the cruise. Compositions of 34 rock samples provide constraints on the landslide source regions and emplacement mechanisms. The bench scarp consists mainly of highly fractured, vesiculated, and oxidized aa lavas that slumped from the subaerial flank of ancestral Mauna Loa. The megablock contains three units: block facies, matrix facies, and draped sediment. The block facies contains hyaloclastite interbedded with massive lava, which slid from the shallow submarine flank of ancestral Mauna Loa, as indicated by glassy groundmass of the hyaloclastite, low oxidation state, and low sulfur content. The matrix facies, which directly overlies the block facies and is similar to a lahar deposit, is thought to have been deposited from the water column immediately after the South Kona slide event. The draped sediment is a thin high-density turbidite layer that may be a distal facies of the Alika-2 debris-avalanche deposit; its composition overlaps with rocks from subaerial Mauna Loa. The deposits generated by the South Kona slide vary from debris avalanche deposit to turbidite. Spatial distribution of the deposits is consistent with deposits related to large landslides adjacent to other Hawaiian volcanoes and the Canary Islands.  相似文献   

13.
The Highway–Reward massive sulphide deposit is hosted by a silicic volcanic succession in the Cambro-Ordovician Seventy Mile Range Group, northeastern Australia. Three principal lithofacies associations have been identified in the host succession: the volcanogenic sedimentary facies association, the primary volcanic facies association and the resedimented syn-eruptive facies association. The volcanogenic sedimentary facies association comprises volcanic and non-volcanic siltstone and sandstone turbidites that indicate submarine settings below storm wave base. Lithofacies of the primary volcanic facies association include coherent rhyolite, rhyodacite and dacite, and associated non-stratified breccia facies (autoclastic breccia and peperite). The resedimented volcaniclastic facies association contains clasts that were initially formed and deposited by volcanic processes, but then redeposited by mass-flow processes. Resedimentation was more or less syn-eruptive so that the deposits are essentially monomictic and clast shapes are unmodified. This facies association includes monomictic rhyolitic to dacitic breccia (resedimented autoclastic facies), siltstone-matrix rhyolitic to dacitic breccia (resedimented intrusive hyaloclastite or resedimented peperite) and graded lithic-crystal-pumice breccia and sandstone (pumiceous and crystal-rich turbidites). The graded lithic-crystal-pumice breccia and sandstone facies is the submarine record of a volcanic centre(s) that is not preserved or is located outside the study area. Pumice, shards, and crystals are pyroclasts that reflect the importance of explosive magmatic and/or phreatomagmatic eruptions and suggest that the source vents were in shallow water or subaerial settings.The lithofacies associations at Highway–Reward collectively define a submarine, shallow-intrusion-dominated volcanic centre. Contact relationships and phenocryst populations indicate the presence of more than 13 distinct porphyritic units with a collective volume of 0.5 km3. Single porphyritic units vary from <10 to 350 m in thickness and some are less than 200 m in diameter. Ten of the porphyritic units studied in the immediate host sequence to the Highway–Reward deposit are entirely intrusive. Two of the units lack features diagnostic of their emplacement mechanism and could be either lavas and intrusions. Direct evidence for eruption at the seafloor is limited to a single partly extrusive cryptodome. However, distinctive units of resedimented autoclastic breccia indicate the presence nearby of additional lavas and domes.The size and shape of the lavas and intrusions reflect a restricted supply of magma during eruption/intrusion, the style of emplacement, and the subaqueous emplacement environment. Due to rapid quenching and mixing with unconsolidated clastic facies, the sills and cryptodomes did not spread far from their conduits. The shape and distribution of the lavas and intrusions were further influenced by the positions of previously or concurrently emplaced units. Magma preferentially invaded the sediment, avoiding the older units or conforming to their margins. Large intrusions and their dewatered envelope may have formed a barrier to the lateral progression and ascent of subsequent batches of magma.  相似文献   

14.
 High-resolution bathymetric mapping has shown that submarine flat-topped volcanic cones, morphologically similar to ones on the deep sea floor and near mid-ocean ridges, are common on or near submarine rift zones of Kilauea, Kohala (or Mauna Kea), Mahukona, and Haleakala volcanoes. Four flat-topped cones on Kohala were explored and sampled with the Pisces V submersible in October 1998. Samples show that flat-topped cones on rift zones are constructed of tholeiitic basalt erupted during the shield stage. Similarly shaped flat-topped cones on the northwest submarine flank of Ni'ihau are apparently formed of alkalic basalt erupted during the rejuvenated stage. Submarine postshield-stage eruptions on Hilo Ridge, Mahukona, Hana Ridge, and offshore Ni'ihau form pointed cones of alkalic basalt and hawaiite. The shield stage flat-topped cones have steep (∼25°) sides, remarkably flat horizontal tops, basal diameters of 1–3 km, and heights <300 m. The flat tops commonly have either a low mound or a deep crater in the center. The rejuvenated-stage flat-topped cones have the same shape with steep sides and flat horizontal tops, but are much larger with basal diameters up to 5.5 km and heights commonly greater than 200 m. The flat tops have a central low mound, shallow crater, or levees that surrounded lava ponds as large as 1 km across. Most of the rejuvenated-stage flat-topped cones formed on slopes <10° and formed adjacent semicircular steps down the flank of Ni'ihau, rather than circular structures. All the flat-topped cones appear to be monogenetic and formed during steady effusive eruptions lasting years to decades. These, and other submarine volcanic cones of similar size and shape, apparently form as continuously overflowing submarine lava ponds. A lava pond surrounded by a levee forms above a sea-floor vent. As lava continues to flow into the pond, the lava flow surface rises and overflows the lowest point on the levee, forming elongate pillow lava flows that simultaneously build the rim outward and upward, but also dam and fill in the low point on the rim. The process repeats at the new lowest point, forming a circular structure with a flat horizontal top and steep pillowed margins. There is a delicate balance between lava (heat) supply to the pond and cooling and thickening of the floating crust. Factors that facilitate construction of such landforms include effusive eruption of lava with low volatile contents, moderate to high confining pressure at moderate to great ocean depth, long-lived steady eruption (years to decades), moderate effusion rates (probably ca. 0.1 km3/year), and low, but not necessarily flat, slopes. With higher effusion rates, sheet flows flood the slope. With lower effusion rates, pillow mounds form. Hawaiian shield-stage eruptions begin as fissure eruptions. If the eruption is too brief, it will not consolidate activity at a point, and fissure-fed flows will form a pond with irregular levees. The pond will solidify between eruptive pulses if the eruption is not steady. Lava that is too volatile rich or that is erupted in too shallow water will produce fragmental and highly vesicular lava that will accumulate to form steep pointed cones, as occurs during the post-shield stage. The steady effusion of lava on land constructs lava shields, which are probably the subaerial analogs to submarine flat-topped cones but formed under different cooling conditions. Received: 30 September 1999 / Accepted: 9 March 2000  相似文献   

15.
We studied the anisotropy of magnetic susceptibility (AMS) of 22 basaltic flow units, including S-type pahoehoe, P-type pahoehoe, toothpaste lava and 'a' emplaced over different slopes in two Hawaiian islands. Systematic differences occur in several aspects of AMS (mean susceptibility, degree of anisotropy, magnetic fabric and orientation of the principal susceptibilities) among the morphological types that can be related to different modes of lava emplacement. AMS also detects systematic changes in the rate of shear with position in a unit, allowing us to infer local flow direction and some other aspects of the velocity field of each unit. 'A' flows are subject to stronger deformation than pahoehoe, and also their internal parts behave more like a unit. According to AMS, the central part of pahoehoe commonly reveals a different deformation history than the upper and lower extremes, probably resulting from endogenous growth.  相似文献   

16.
The Bouzentès lava flow is a 20-m-thick alkali basalt flow emplaced during the last stage of formation of the Cantal stratovolcano at 4.2 Ma. Its upper part has 1- to 20-cm-thick vesicle-rich segregation sheets which recur every 0.1–2 m. These horizontal veins are hawaiitic in composition. They are characterized by hypertrophic development of their minerals (‘pegmatoids’) and by glassy phonolitic segregation vesicles. Internal differentiation within the Bouzentès lava flow was triggered by an unusually high water content, as suggested by pre-emptive iddingsite alteration of olivine phenocrysts. The proposed model of formation of the segregation sheets includes the upward motion of diapirs of residual melt plus addition of vapor from the bottom of the central liquid lens to the base of the upper solidified crust of the cooling lava flow. Olivine settling appears to have been inhibited or at least retarded by upward migration of melt plus vesicles. Most of the features observed in Bouzentès recall the internal differentiation processes usually described within thick Hawaiian lava lakes. The segregation vesicles are believed to result from an increase of gas solubility in residual melt during the crystallization process.  相似文献   

17.
The Palaeogene Faroe Islands Basalt Group (FIBG) comprises three eruptive sequences or formations, all emplaced into a subaerial environment during the development of the extensive continental flood basalt province that stretches from East Greenland through the Faroe Islands and into the Faroe-Shetland Basin. The Beinisvørð Formation, having a tabular-classic facies architecture, is composed of a sequence of simple flows each comprising a single sheet lobe. The Beinisvørð Formation is overlain by the distinctly contrasting Malinstindur Formation that has a compound-braided facies architecture. The Enni Formation occurs at the top of the sequence and consists of a mixture of simple and compound flows with tabular-classic and compound-braided facies architectures, respectively. Surface and internal characteristics of the sheet lobes of the Beinisvørð and Enni formations indicate emplacement through inflation, which is more obvious for the tube-fed compound flows of the Malinstindur and Enni formations. The difference between the simple and compound flow sequences of the FIBG is, most likely, linked to the manner in which the lava was supplied during the eruption and the eruptive style of the volcanic system. The sheet lobes were erupted over laterally extensive areas from fissure systems which had a continuous supply of lava, which contrasts with the tube-fed compound flows which were erupted in a gradual, piecemeal manner from point-sourced, low shield volcanoes with limited areal extents.  相似文献   

18.
A seafloor lava field was mapped within the summit caldera of Axial Volcano, Juan de Fuca Ridge, using SeaMARC I sidescan sonor and submersible observations. By analogy with similar subaerial features, we infer that several volcanic seafloor features here formed by the process of lava flow inflation. Flow inflation occurs within tube-fed lava flows when lava continues to be supplied to the interior of a flow that has ceased advancing, thus uplifting the flow's rigid surface and creating a suite of characteristic surface structures. Inflated lavas require a feeder lava tube or tube system connected to a remote lava source, and therefore we infer that inflated submarine lava flows contain lava tubes. Inflated flow features identified from sidescan sonar images elsewhere on Axial Volcano and within the axial valley of the southern Juan de Fuca ridge suggest that flow inflation is a widespread submarine volcanic process.  相似文献   

19.
Ascertaining the emplacement mechanism of oceanic basaltic lavas is important in understanding how ocean floor topography is produced and oceanic plates evolve, particularly during the early stages of crustal development of a supra-subduction zone. A detailed study of the volcanic stratigraphy at International Ocean Discovery Program (IODP) Site U1438 in the Amami Sankaku Basin, west of the Kyushu–Palau Ridge, has revealed the development of lava accretion and ridge topography on the Philippine Sea plate at about 49 Ma. Igneous basement rocks penetrated at Site U1438 are the uppermost 150 m of ~6 km-thick oceanic crust, and comprise, in a downhole direction, sheet flows (12.6 m), lobate sheet flows (61.3 m), pillow lavas (50.7 m), and thin sheet flows (25.3 m). The lowermost sheet flows are intercalated with layers of limestone and epiclastic tuff. Lithofacies analysis reveals that the lowermost sheet flows, limestone, and tuff formed on an axial rise, the pillow lavas were emplaced on a ridge slope, and the lobate sheet flows formed off ridge on an abyssal plain. The lithofacies of the basement basalt corresponds to the upper portions of fast-spreading oceanic crust, suggesting that subduction initiation was associated with intermediate to fast rates of seafloor spreading. The surface sheet flows are olivine–clinopyroxene-phyric basalt and differ from the lower basalt flows that contain phenocrysts of olivine and plagioclase, with or without clinopyroxene. The depleted chrome-spinel composition and olivine–clinopyroxene phenocryst assemblage in the surface sheet flows suggests a slight contribution of water for magma generation not present for the lower basalt flows. Considering the lithological difference between the backarc and forearc oceanic crust in the Izu–Bonin–Mariana arc, with sheet flow dominant in the former, seafloor spreading occurred faster in the later stage of subduction initiation.  相似文献   

20.
This study uses on-land and offshore geological and structural data to demonstrate that a huge lateral collapse involved the SE flank of Nisyros volcano. The collapse beheaded the summit part of the volcano and also involved the submarine portion of the slope, producing a large debris avalanche deposit with a volume of about 1 km3 which has been recognized on the sea floor. On-land, stratigraphic and structural data indicate that a thick succession of lava flows (Nikia lavas) was emplaced in a huge horseshoe-shaped depression open seaward and extending below the sea. The magma-feeding system in the volcano, pre-dating and following the collapse, was structurally influenced by a dominant NE–SW direction, which is perpendicular to the newly-recognised sector collapse. The NE–SW structural trend is consistent with the regional tectonic structures found offshore around Nisyros and with the related NW–SE extension direction. We suggest that the lateral magma pressure produced by repeated magma injections along tectonic discontinuities contributed to destabilise the volcano flank. The occurrence of a pyroclastic deposit that mantled the scar left by the collapse suggests that a magma batch might have been injected inside the volcano and triggered the collapse. The lavas of the pre-collapse edifice have been deposited in alternating submarine and subaerial environments, suggesting that vertical movements might also be a major triggering mechanism for large lateral collapses. Recognition of this phenomenon is particularly important in recent/active island or coastal volcanoes, as it can trigger tsunamis.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号