共查询到19条相似文献，搜索用时 281 毫秒
1.
文中采用遥感资料,对阿尔泰山东缘的主要活动断裂———科布多(Hovd)断裂与哈尔乌苏湖(Har-Nuur)断裂进行研究,从地貌特征上对断裂进行详细分析,揭示其几何学和运动学特征。初步研究表明阿尔泰山东缘的活动断裂规模、滑动速率和强地震活动并不弱于其西南缘。其中科布多断裂走向NNW,右旋走滑,长约600km,中更新世(Q2p)以来最大水系右旋位错约9.0km,滑动速率可达3.8～12.3mm/a,平均滑动速率约7.8mm/a;哈尔乌苏湖断裂走向NNW,右旋走滑,长约480km,全新世以来活动性明显增强,第四纪洪积扇上发现有最新的断裂迹象。阿尔泰山东缘的新构造运动与强地震活动,除了与印度-欧亚板块碰撞作用有关外,可能还与局部地区的动力学过程有关 相似文献
2.
2008年5月12日四川汶川Ms8.0地震是一条陆内活动逆断裂带最新活动的结果.地震震源断裂沿龙门山构造带中央断裂发生斜滑作用和沿前山断裂发生纯逆断裂作用,断裂产状前者陡后者缓,垂直位移前者大后者小,这是一条少见的具有右旋走滑特征的挤压性质双断坡破裂,它是深部斜滑断裂在上地壳脆性域发生应变分解的结果.地震地表破裂带的分段活动和位移分布、地震波反演、余震空间分布、主震和余震震源机制解都说明这一条活动断裂带的活动机制和震源断裂破裂机制的复杂性.北西向小鱼洞左旋走滑破裂带是调节北东向破裂带中缩短量不同的破裂段之间的捩断裂,但由于震源断裂西南段经受着强烈挤压,左旋走滑的小鱼洞断裂也具有明显的挤压分量.在中央断裂这一条走滑逆冲和逆走滑性质的断裂和破裂带中出现的走滑正断裂控制的沙坝沟槽是在一个特殊的构造和地貌条件下,由震源断裂滑动和重力共同作用的结果,重力作用加大了该段破裂的正断层型垂直位移量,它不能真正代表震源断裂的最大地表垂直位移. 相似文献
3.
汶川M_S8.0地震地表破裂带及其发震构造 总被引：178，自引：33，他引：145
徐锡伟 闻学泽 叶建青 马保起 陈杰 周荣军 何宏林 田勤俭 何玉林 王志才 孙昭民 冯希杰 于贵华 陈立春 陈桂华 于慎鄂 冉勇康 李细光 李陈侠 安艳芬 《地震地质》2008,30(3):597-629
震后应急野外考察表明,2008年5月12日汶川MS8.0地震在青藏高原东缘龙门山推覆构造带上同时使北川-映秀断裂和灌县-江油断裂两条倾向NW的叠瓦状逆断层发生地表破裂。其中,沿北川-映秀断裂展布的地表破裂带长约240km,以兼有右旋走滑分量的逆断层型破裂为主,最大垂直位移6.2m,最大右旋走滑位移4.9m;沿灌县-江油断裂连续展布的地表破裂带长约72km,最长可达90km,为典型的纯逆断层型地表破裂,最大垂直位移3.5m;另外,在上述两条地表破裂带西部还发育着1条NW向带有逆冲垂直分量、左旋走滑性质的小鱼洞地表破裂带,长约6km。这一地表破裂样式是近期发生的特大地震中结构最复杂的一次逆断层型地表破裂,地表破裂的长度也最长。利用已有的石油地震剖面,结合余震分布和地表破裂带特征等资料构建的三维发震构造模型表明,龙门山推覆构造带现今和第四纪时期以地壳缩短为主,斜滑逆冲型地震表明青藏高原中东部的水平运动在华南地块与巴颜喀拉地块之间的龙门山推覆构造带上转化为地壳的缩短和隆升 相似文献
4.
汶川M_S8.0地震地表破裂带北川以北段的基本特征 总被引：30，自引：5，他引：25
对北川-青川间汶川MS8.0地震地表破裂的野外地质调查表明,在这一段内主要存在一条地震地表破裂带,总体沿北川-青川断裂带分布。沿黄家坝、陈家坝、桂溪、平通、南坝、石坎等地的观察显示,该段地表破裂沿走向连续分布,结构单一,破裂长度为60~90km,地表破裂没有到达青川县关庄镇。可观察到的破裂长度在北川北至石坎之间,长62km,走向总体为20°~55°,运动学性质主要为右旋走滑逆冲。地震形成的地表破裂主要表现为垂向上的地表拱曲,指示了深部断层的逆冲性质;在水平运动方向上则主要表现为右旋走滑,不存在左旋走滑分量。地震地表破裂显示的同震垂直位移从西南段黄家坝的3m左右,向东北逐渐降低至南坝、石坎的1.5m左右;右旋水平位移没有明显变化或者略有增加,一般在1.5~2.0m之间。地表破裂特征表明,引起本次汶川MS8.0地震的发震构造是映秀-北川-青川断裂带,该断裂以逆冲运动为主,兼具右旋走滑分量,逆冲方向由NW向SE 相似文献
5.
汶川地震地表破裂在东北端从石坎子乡到窝前的运动性质存着从走滑分量略高于倾滑分量到完全为右旋走滑运动的变化过程,倾滑分量在石坎子—平溪段具有逆断性质,在矿坪子及其以北为正断性质,未见挤压变形,窝前完全为右旋走滑运动,地表变形带宽度集中在10m以内;在董家村,地震地表破裂带主要表现为张性裂缝及地堑式负地形,是地震破裂在尾端应力作用下,应变不均一性调节的产物,地表变形带宽度约10～12m;在东河口以北未见地表破裂的证据,推测汶川地震地表破裂带没有穿过流经青川县东河口、关庄、凉水井一带的清水河,东河口一带的构造地貌现象反映了垂直差异性运动,不存在右旋走滑运动的地质地貌证据。在中央断裂东北端断层一侧隆升和另一侧拉张的典型四象限格局成为汶川地震地表破裂的端部表现特征。中央断裂上的汶川地震地表破裂带总长度为240km左右。在汶川地震过程中,沿着中央断裂在地表产生的构造变形在中央断裂的范围内就已经得到了调整,并没有越过中央断裂的范围而传递到以外的地段。 相似文献
6.
作为“位于亚洲大陆东南部强烈变形场中的左旋剪切破裂带,撕裂了高耸的青藏高原的东南部边缘,在中国大陆内部新构造格局中占据着突出位置”的青藏高原东缘一条重要的左旋走滑断裂带,鲜水河断裂带有着丰富的历史地震记录、较清晰的地貌特征和地表破裂形迹,是开展活动断裂定量研究、检验地震破裂分段模型——独立破裂模型和级联破裂模型的理想场所, 相似文献
7.
海阳断裂是胶东半岛NE向牟平 -即墨断裂带东部一条规模较大的断裂 ,尽管晚更新世以来该断裂的地表断错活动总体上已基本停息 ,但东石兰沟段在晚更新世晚期以来仍有断错地表的活动。最后一次断错地表的活动发生在距今 3 7～ 1 2万年 ,但接近 1 2万年。地表破裂长度约6 5km ,活动段长度 8km。地表断错以走滑活动为主 ,可见最大倾滑位移 0 2m ;根据断层擦痕侧伏角推测最大水平位移 1 13m。最后一次断错地表的活动若以距今 1 2万年计算 ,则最大平均倾滑速率为 0 0 17mm/a ;最大平均右旋走滑速率为 0 0 94mm/a。野外观测到该活动段的断错活动表现为突发断错 ,根据地震地表破裂参数、活动段长度与地震的关系 ,估计其最大潜在地震为 6 级 相似文献
8.
1 研究背景
川滇菱形块体是青藏高原东缘侧向挤出最强的活动块体,地震活动强烈而频繁.其西南边界——红河断裂带是一条右旋走滑的活动断裂,其西北边界——金沙江断裂是一条多期活动的缝合线构造,表现为右旋走滑兼逆冲性质.维西—乔后断裂位于川滇菱形块体西部边缘,南与红河断裂相接,北与金沙江断裂相连,是红河活动断裂带的北延部分(图1). 相似文献
9.
１９３１年８月１１日在新疆阿尔泰山区发生的富蕴８级地震,造成了１７６ｋｍ长的地表地震断裂带。这条地震断裂带规模巨大,断裂地貌十分醒目,地震断裂类型齐全,是一条典型的右旋走滑脆性剪切破裂带。特别是在震中区一带,破裂现象宏伟壮观,是世界上罕见的。该断裂带不仅是世界地学工作者向往参观、考察之地,也是我国及我区地学工作者向往之地。为了结我区地学工作者多年的夙愿,１９９９年６月２４～２９日,新疆地震学会组织了乌鲁木齐市的部分会员前往富蕴考察了断裂带,并参观了哈纳斯湖。新疆地震学会会员考察富蕴断裂带$新疆维… 相似文献
10.
基于卫星影像解译和野外考察测量,本文对东昆仑断裂带中东部的3条次级断裂(托索湖断裂、玛沁断裂和玛曲断裂)的滑动速率以及全新世以来的古地震活动特征进行了分析研究。托索湖段与玛沁段走向产生20°和30°的双挤压弯曲,形成阿尼玛卿山挤压隆起,作为托索湖段和玛沁段的破裂分段标志,成为1937年托索湖7.5级地震地表破裂带的终止点;在西贡周西侧和莫哈塘南侧,阿万仓断裂以40°的夹角与东昆仑断裂带相交,形成西贡周断裂交汇区,成为玛沁段与玛曲段破裂分段的标志。通过构造地貌方法获得西段托索湖断裂晚第四纪晚期以来的平均水平速率为10.8±1mm/a,垂直滑动速率为1.2±0.2mm/a;中段玛沁断裂带晚第四纪晚期以来的平均水平滑动速率为9.3±2mm/a,垂直滑动速率为0.7±0.1mm/a;西贡周断层交汇区平均水平滑动速率为7.4±1mm/a,垂直滑动速率为1.2±0.1mm/a;东段玛曲断裂晚第四纪晚期以来的平均水平滑动速率为4.9±1.3mm/a,垂直滑动速率为0.3mm/a。断裂的滑动速率从西至东呈梯度下降,通过构造转换矢量分解获得阿万仓断裂西支的左旋水平走滑速率为2.4mm/a,东支的左旋水平走滑速率为1.4mm/a,垂直断裂的水平缩短速率为2.3mm/a,阿万仓断裂带西支和东支构成一个滑动分解模式。3条次级断裂的活动均产生独立地表破裂,西侧的托索湖断裂发生了1937年MS7.5级地震,中段玛沁断裂发生了公元1061年格萨尔王时期和距今358~430CalaBP的地表破裂,玛曲段地表破裂距今约1055~1524aBP,显示出段落之间应力触发有关的地震破裂事件沿断裂带单向迁移的特征。同时利用断裂单次地震位移和古地震复发周期获得断裂的长期滑动速率,结果显示与构造地貌方法获得的滑动速率几乎一致,也显示自西向东逐渐递减的趋势。断裂滑动速率的递减与几何结构走向的弯曲以及横向断裂的相交一一对应,东昆仑断裂带的滑动速率梯度递减的主要原因是东昆仑断裂带东延和横向断裂相交,构造转换造成的。 相似文献
11.
在阿尔金构造系中,阿尔金走滑断裂具有逆冲分量。文中将阿尔金构造系的逆冲活动分为西、中、东3段描述。西段从阿依耐克至车尔臣河河口,阿尔金南缘断裂具有逆冲活动迹象,在山前发育了规模较小的逆冲断层,有较新的地貌面被错动;中段从车尔臣河河口至拉配泉一带,在阿尔金山北缘发育大规模的逆冲断层,有较新的地貌面被错动;东段从拉配泉至宽滩山,逆冲断层有2种形式,此段阿尔金北缘断裂有逆冲分量,同时在阿尔金山北缘及山前冲洪积扇上发育逆冲断裂。自晚更新世中晚期以来,中段及东段逆冲速率<2mm/a。中段西部江尕拉萨依地区自16kaBP以来逆冲速率约为0.33mm/a,中部米兰桥一带自32kaBP以来的逆冲速率约为1.42mm/a。东段最大的逆冲速率在近中部的团结乡,自约5.31kaBP以来达到约1.81mm/a,向东西两端有减小的趋势,在西部柳城子自约72.36kaBP以来的逆冲速率为0.57mm/a,而东端的红柳沟自约8.99kaBP以来仅为0.05mm/a。团结乡地区约自19kaBP以来,逆冲活动有增强的趋势 相似文献
12.
在野外实测工作基础上, 对香山北缘活动断裂带东段自晚更新世以来的水平活动强度分时、 分段进行了研究. 结果表明, 该断裂带东段自晚更新世以来, 总体水平活动强度不大: 晚更新世早—中期水平位移速率为1.44 mm/a, 晚期水平位移速率为0.53 mm/a, 全新世水平位移速率为1.01 mm/a. 该断裂带左旋走滑强度在走向上具有不均一性, 而且其活动强度的最大部位(活动中心)随时间向东发生迁移, 碱沟—刘岗井次级断层是现今活动强度最大的次级断层. 相似文献
13.
LATE QUATERNARY ACTIVITY OF THE CENTRAL SEGMENT OF THE DARI FAULT AND RESTUDY OF THE SURFACE RUPTURE ZONE OF THE 1947 M73/4 DARI EARTHQUAKE,QINGHAI PROVINCE 
下载免费PDF全文
下载免费PDF全文 Bayan Hara Block is one of the most representative active blocks resulting from the lateral extrusion of Tibet Plateau since the Cenozoic. Its southern and northern boundary faults are characterized by typical strike-slip shear deformation. Its eastern boundary is blocked by the Yangze block and its horizontal movement is transformed into the vertical movement of the Longmen Shan tectonic belt, leading to the uplift of the Longmen Shan Mountains and forming a grand geomorphic barrier on the eastern margin of the Tibet Plateau. A series of large earthquakes occurred along the boundary faults of the Bayan Hara Block in the past twenty years, which have attracted attention of many scholars. At present, the related studies of active tectonics on Bayan Hara Block are mainly concentrated on the boundary faults, such as Yushu-Ganzi-Xianshuihe Fault, East Kunlun Fault and Longmen Shan Fault. However, there are also some large faults inside the block, which not only have late Quaternary activity, but also have tectonic conditions to produce strong earthquake. These faults divide the Bayan Hara Block into some secondary blocks, and may play important roles in the kinematics and dynamics mechanism of the Bayan Hara Block, or even the eastern margin of the Tibet Plateau. The Dari Fault is one of the left-lateral strike-slip faults in the Bayan Hara Block. The Dari Fault starts at the eastern pass of the Kunlun Mountains, extends eastward through the south of Yalazela, Yeniugou and Keshoutan, the fault strike turns to NNE direction at Angcanggou, then turns to NE direction again at Moba town, Qinghai Province, and the fault ends near Nanmuda town, Sichuan Province, with a total length of more than 500km. The fault has been considered to be a late Quaternary active fault and the 1947 M73/4 Dari earthquake was produced by its middle segment. But studies on the late Quaternary activity of the Dari Fault are still weak. The previous research mainly focused on the investigation of the surface rupture and damages of the 1947 M73/4 Dari earthquake. However, there were different opinions about the scale of the M73/4 earthquake surface rupture zone. Dai Hua-guang(1983)thought that the surface rupture of the earthquake was about 150km long, but Qinghai Earthquake Agency(1984) believed that the length of surface rupture zone was only 58km. Based on interpretation of high-resolution images and field investigations, in this paper, we studied the late Quaternary activity of the Dari Fault and the surface rupture zone of the 1947 Dari earthquake. Late Quaternary activity in the central segment of the Dari Fault is particularly significant. A series of linear tectonic landforms, such as fault trough valley, fault scarps, fault springs and gully offsets, etc. are developed along the Dari Fault. And the surface rupture zone of the 1947 Dari earthquake is still relatively well preserved. We conducted a follow-up field investigation for the surface rupture zone of the 1947 Dari earthquake and found that the surface rupture related to the Dari earthquake starts at Longgen village in Moba town, and ends near the northwest of the Yilonggounao in Jianshe town, with a length of about 70km. The surface rupture is primarily characterized by scarps, compressional ridges, pull-apart basins, landslides, cleavage, and the coseismic offset is about 2~4m determined by a series of offset gullies. The surface rupture zone extends to the northwest of Yilonggounao and becomes ambiguous. It is mainly characterized by a series of linear fault springs along the surface rupture zone. Therefore, we suggest that the surface rupture zone of the 1947 Dari earthquake ends at the northwest of Yilonggounao. In summary, the central segment of the Dari Fault can be characterized by strong late Quaternary activity, and the surface rupture zone of the 1947 Dari earthquake is about 70km long. 相似文献
14.
15.
The Hetao depression zone, located to the north of Ordos block, is a complex depression basin that consists of two sub-uplifts and three sub-depressions. The depression zone is subject to the regional extensional stress field driven by the Indo-Asian continental collision and the westward subduction of the Pacific Plate. The Baotou uplift that separates the Baiyanhua sub-depression and Huhe sub-depression is mainly composed of Archean gneiss and is overlaid by Quaternary sedimentary strata. The two sub-depressions are bordered by the Wula Mountains and Daqing Mountains to the north, respectively. The bedrock exhumed in Wula Mountains and Daqing Mountains consists mostly of Precambrian granitic gneiss, and the piedmont depressions are infilled by thick Cenozoic strata. The Wulashan piedmont fault and Daqingshan piedmont fault extend along the range front of Wula Mountains and Daqing Mountains, respectively. The subsidence is controlled by the two boundary faults. Previous studies have preliminarily documented the characteristics of the northwest boundary fault of Baotou uplift. Combining shallow seismic exploration, active fault mapping, and geological drilling, this paper presents a detailed study on the tectonic characteristics of the Baotou uplift.
The shallow seismic exploration reveals that the Baotou uplift is an asymmetrical wedge with a steep southeast wing and a gentle dipping northwest wing. The Baotou uplift is wider in the northeastern part and narrows down towards the southwest. In seismic profiles, the Baiyanhua sub-depression and the Huhe sub-depression manifest as asymmetric dustpan-like depressions with south-dipping controlling faults. Baotou uplift is bounded by the Xishawan-Xingsheng Fault to the northwest and Daqingshan piedmont fault to the southeast. The two faults exhibit significant difference in many aspects, such as fault geometry, fault displacement, the latest active time, and so on. The southeast boundary fault of Baotou uplift is the Baotou section of the Daqingshan piedmont fault which is a Holocene active fault and the major boundary fault of Huhe sub-depression. East of Wanshuiquan, the fault strikes EW-NEE; west of Wanshuiquan, the strike changes to NW. The Daqingshan piedmont fault appears as a south-dipping listric fault in seismic profiles whose dip decreases with depth and cuts through all the sedimentary strata in Huhe sub-depression; the fault extends along the late Pleistocene lacustrine platform at surface with prominent geomorphological evidences. The Xishawan-Xingsheng Fault is a buried high-angle normal fault that mainly dips to the northwest and strikes NE. The fault strike changes to NNE at the eastern tip. Based on the results of seismic exploration and geological drilling, the Xishawan-Xingsheng buried fault is an early to middle Pleistocene Fault capped by late Pleistocene lacustrine strata. We reckon that the Xishawan-Xingsheng Fault is one of the synthetic faults that dip towards the main boundary fault of Baiyanhua sub-depression.
Similarities in lithology, geometry, and structural characteristics of south boundary faults all indicate that Baotou uplift is the western extension of Daqing Mountains. Multiple factors may contribute to the formation of Baotou uplift, such as tectonic subsidence and the development of large-scale river system and mega-lake. We suggest that the upwelling of asthenosphere may play a primary role in the evolution of Wulanshan piedmont fault and Daqingshan piedmont fault. Separated by the Baotou uplift, the Wulashan piedmont fault and Daqingshan piedmont fault can be regarded as independent seismogenic faults. The Hetao depression zone is featured by complex inner structures, and many scientific issues are subject to further researches. Thus, more attention should be paid to the secondary structures within the depression zone for a better understanding on the formation and evolution of Hetao depression zone. 相似文献
16.
安徽地区历史及现代地震活动与断裂活动性关系研究 总被引：2，自引：0，他引：2
安徽地区处于华北板块与扬子板块沿着大别造山带的陆一陆碰撞变形带,构造背景复杂多样,断裂十分发育。郯庐断裂带长期控制着两侧的构造格局,大别山东缘的霍山地区多条断裂在晚第四纪有新活动。史料记载表明安徽地区历史地震以中强震为主,最高震级为M6 1/4级。根据区域地震地质、历史地震近年最新研究成果,对第四纪特别是晚第四纪以来的断裂活动习性做出归纳和分类,并分析历史地震、1970年后有仪器记载以来中等强度地震和小地震密集与断裂活动的相关性,为中长期地震预测提供依据。 相似文献
17.
祁连山活动断裂带中东段冷龙岭断裂滑动速率的精确厘定 总被引：14，自引：0，他引：14
冷龙岭活动断裂是青藏高原东北缘祁连山断裂带的重要组成部分, 位于祁连山断裂带中东段。 根据野外考察结果认为, 该断裂全新世以来活动强烈, 主要表现为左旋走滑运动, 并伴有正倾滑性质, 断错地貌特征明显。 通过高分辨率SPOT卫星数字影像和大比例尺航空照片处理确定断层的位置, 利用断错地貌测图、 热释光(TL)和碳十四(14C)测年方法, 厘定了冷龙岭断裂的晚第四纪滑动速率, 冷龙岭断裂晚更新世以来的平均水平滑动速率为(4.3±0.7)mm/a, 全新世晚期以来的平均水平滑动速率为(3.9±0.36)mm/a。 相似文献
18.
19.
The 2014 Jinggu M6.6 earthquake attacked the Jinggu area where few historical earthquakes had occurred and little study has been conducted on active tectonics. The lack of detailed field investigation on active faults and seismicity restricts the assessment of seismic risk of this area and leads to divergent view points with respect to the seismotectonics of this earthquake, so relevant research needs to be strengthened urgently. In particular, some studies suggest that this earthquake triggered the activity of the NE-trending faults which have not yet been studied. By the approaches of remote sensing image interpretation, structural geomorphology investigation and trench excavation, we studied the late Quaternary activity of the faults in the epicenter area, which are the eastern margin fault of Yongping Basin and the Yixiang-Zhaojiacun Fault, and drew the conclusions as follows:
(1)The eastern margin fault of Yongping Basin originates around the Naguai village in the southeastern margin of Yongping Basin,extending northward across the Qiandong, Tianfang, and ending in the north of Tiantou. The fault is about 43km long, striking near SN. The linear characteristic of the fault is obvious in remote sensing images. Structural geomorphological phenomena, such as fault troughs, linear ridges and gully dislocations, have developed along the faults. There are several dextral-dislocated gullies near Naguai village, with displacements of 300m, 220m, 146m, 120m and 73m, respectively, indicating that the fault is a dextral strike-slip fault with long-term activity. In order to further study the activity of the fault, a trench was excavated in the fault trough, the Naguai trench. The trench reveals many faults, and the youngest strata offseted by the faults are Holocene, with 14C ages of(1 197±51)a and(1 900±35)a, respectively. All those suggest that it is a Holocene active fault.
(2)The Yixiang-Zhaojiacun Fault starts at the southeast of the Jinggu Basin, passes through Xiangyan, Yixiang, Chahe, and terminates at the Zhaojiacun. The total length of the fault is about 60km, and is a large-scale NE-trending fault in the Wuliangshan fault zone. Four gullies are synchronously sinistrally dislocated at Yixiang village, with the displacements of 340m, 260m, 240m and 240m, indicating that the fault is a long-term active sinistral strike-slip fault. A trench was excavated in a fault trough in Yixiang village. The trench reveals a small sag pond and a fault. The fault offsets several strata with clear dislocation and linear characteristic. The thickness of strata between the two walls of fault does not match, and the gravels are oriented along fault plane. The offset strata have the 14C age of(2 296±56)a, (3 009±51)a, and(4 924±45)a, respectively, and another two strata have the OSL age of(1.8±0.1)ka, (8.6±0.5)ka respectively, by which we constrained the latest paleoearthquake between(1.8±0.1)ka(OSL-Y01)and(378±48)a BP(CY-07). This again provides further evidence that the fault is a Holocene fault with long-term activity.
(3)Based on the distribution of aftershocks and the predecessor research results, the 2014 Jinggu M6.6 earthquake and the M5.8, M5.9 strong aftershocks are regarded as being caused by the eastern margin fault of Yongping Basin, which is part of the Wuliangshan fault zone. The seismogenic mechanism is that the stress has been locked, concentrated and accumulated to give rise to the quakes in the wedge-shaped area near the intersection of the SN and NE striking faults, which is similar to the seismogenic mechanism in the southwest of Yunnan Province. 相似文献