首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A possible dynamic process for magma flow in a volcanic conduit is briefly described. In many of the governing equations, viscosity of magma is involved, and hence, the effective viscosity of magma with small concentration of bubbles was calculated under the assumption of small Reynolds number. The result is $$\eta _\ell = \eta _u (1 + \Phi ),$$ where ηo is the viscosity of a liquid and ? is the volume concentration of bubbles. Thus, the effective viscosity increases with nucleation of gas bubbles in magma. This result reduces the effect of a thermal feedback evele which is postulated as a possible thermodynamical process in viscous magma in a volcanic conduit.  相似文献   

2.
When a highly viscous bubbly magma is sufficiently decompressed, layer-by-layer fracturing propagates through the magma at a certain speed (fragmentation speed). On the basis of a recent shock tube theory by Koyaguchi and Mitani [Koyaguchi, T., Mitani, N. K., 2005. A theoretical model for fragmentation of viscous bubbly magmas in shock tubes. Journal of Geophysical Research 110 (B10), B10202. doi:10.1029/2004JB003513.], gas overpressures at the fragmentation surface are estimated from experimental data on fragmentation speed in shock tube experiments for natural volcanic rocks with various porosities. The results show that gas overpressure at the fragmentation surface increases as initial sample pressure increases and sample porosity decreases. We propose a new fragmentation criterion to explain the relationship between the gas overpressure at the fragmentation surface, the initial pressure and the porosity. Our criterion is based on the idea that total fragmentation of highly viscous bubbly magmas occurs when the tensile stress at the midpoint between bubbles exceeds a critical value. We obtain satisfactory agreement between our simulation and experiment when we assume that the critical value is inversely proportional to the square root of bubble wall thickness. This fragmentation criterion suggests that long micro-cracks or equivalent flaws (e.g., irregular-shaped bubbles) that reach the midpoints between bubbles are a dominant factor to determine the bulk strength of the bubbly magma.  相似文献   

3.
The submarine eruption of a new small knoll, which was named Teishi knoll, off eastern Izu Peninsula behind the Izu-Mariana arc occurred in the evening of 13 July 1989. This is the first historic eruption of the Higashi-Izu monogenetic volcano group. The eruption of 13 July followed an earthquake swarm near Ito city starting on 30 June. There were subsequent volcanic tremors on 11 and 12 July, and the formation of the Teishi knoll on the 100 m deep insular shelf 4 km northeast of Ito city. There were five submarine explosions, which were characterized by intermittent domelike bulges of water and black tephra-jets, which occurred within 10 min on 13 July. Ejecta of the eruption was small in volume and composed of highly crystalline basalt scoria, highly vesiculated pumice, and lithic material. Petrographical features suggest that the pumice was produced by vesiculation of reheated wet felsic tuff of an older formation. The Teishi knoll, before the eruption, was a circular dome, 450 m across and 25 m high, with steep sides and a flat summit. Considerations of submarine topographic change indicate the knoll was raised by sill-like intrusion of 106 m3 of magma beneath a 30 m thick sediment blanket. This shallow intrusion is assumed to have started on 11 July when volcanic tremors were observed for the first time, but there was no indications of violent interaction between wet host sediments and intruding magma. The submarine eruption of 13 July appears to have been Friggered by a major lowering of the magma-column. The basalt scoria, having crystal-contents of more than 60%, is assumed to be derived from the cooled plastic margin of the shallow intrusive body. However, glassy scoria, which would indicate the interaction between hot fluidal magma and external water, was not observed. A scenario for the 1989 submarine eruption is as follows. When rapid subsidence of the hot interior of the intrusive magma occurred, reduced pressure caused the implosion of cooled plastic magma, adjacent pressurized, hot host material, and wet sediment. The mixing of these materials triggered the vigorous vapor explosions.  相似文献   

4.
A study is presented of spectral features of volcanic tremor recorded at Mount Etna (Sicily, Italy) following the methods of analysis suggested by the resonant scattering formalism of Gaunaurd and Überall (1978, 1979a, 1979b) and the model for hydraulic origin of Seidl et al. (1981). The periods investigated include summit and flank eruptions that occurred between 1984 and 1993. Recordings from a permanent station located near the top of the volcano were used, and the temporal patterns associated with (a) the average spacing ( ) between consecutive spectral peaks in the frequency range 1–6 Hz, (b) the spectral shape and (c) the overall spectral amplitude were analyzed. values are thought to depend on the physical properties of magma, such as its density, which, in turn, is controlled by the degree of gas exsolution. Variations in the spectral shape are tentatively attributed to changes in the geometrical scattering from the boundary of resonant conduits and magma batches. Finally, the overall amplitude at the station should essentially reflect the state of turbulence of magma within the superficial ascending path. A limit in the application of the resonant scattering formalism to the study of volcanic tremor is given by the fact that the fundamental modes and integer harmonics are difficult to identify in the frequency spectra, as tremor sources are likely within cavities of very complex geometry, rather than in spherical or cylindrical chambers, as expected by theory. This study gives evidence of some correlations between the analyzed temporal patterns and the major events in the volcanic activity, related to both lava flow and explosions at the summit vents. In particular, relatively high values of have been attained during the SE crater eruption of 1984, the complex eruptive phases of September–October 1989 and the 1991–1993 flank eruption, suggesting the presence of a relatively dense magma for all of these events. Conversely, very low values have been recorded in coincidence with the December 1985 activity and the paroxysmal explosions at the summit craters of early 1990, which are interpreted here as fed by fluid-vesiculated magma. Appreciable modifications in the spectral shape have been observed in relation to changes of the volcanic activity that probably preceded the opening and disactivation of shallow dykes or magma batches. Finally, the overall amplitude seems to be a sensitive indicator of the state of gas turbulence within the shallow conduits, as is suggested by the high values attained during phases of intense volcanic activity.  相似文献   

5.
Analytical models for decompressional bubble growth in a viscous magma are developed to establish the influence of high magma viscosity on vesiculation and to assess the time-scales on which bubbles respond to decompression. Instantaneous decompression of individual bubbles, analogous to a sudden release of pressure (e.g. sector collapse), is considered for two end-member cases. The infinite melt model considers the growth of an isolated bubble before significant bubble interaction occurs. The shell model considers the growth of a bubble surrounded by a thin shell and is analogous to bubble growth in a highly vesicular magmatic foam. Results from the shell model show that magmas less viscous than 109 Pa s can freely expand without developing strong overpressures. The timescales for pressure re-equilibration are shortened by increased ratios of bubble radius to shell thickness and by larger decompression. Time-scales for isolated bubbles in rhyolitic melts (infinite melt model) are significantly longer, implying that such bubbles could experience internal pressures greater than the ambient pressure for at least a few hours following a sudden release of pressure. The shell model is developed to assess bubble growth during the linear decompression of a magma body of constant viscosity. For the range of decompression rates and viscosities associated with actual volcanic eruptions, bubble growth continues at approximately the equilibrium rate, with no attendant excess of internal pressure. The results imply that viscosity does not have any significant role in preventing the explosive expansion of high viscosity foams. However, for viscosities of >109 Pa s there is the potential for a viscosity quench under the extreme decompression rates of an explosive eruption. It is proposed that the typical vesicularities of pumice of 0.7–0.8 are a consequence of the viscosity of the degassing magmas becoming sufficiently high to inhibit bubble expansion over the characteristic time-scale of eruption. For fully degassed silicic lavas with viscosities in the range 1010 to 1012 Pa s time-scales for decompression of isolated bubbles can be hours to many months.  相似文献   

6.
Among the series of eruptions at Miyakejima volcano in 2000, the largest summit explosion occurred on 18 August 2000. During this explosion, vesiculated bombs and lapilli having cauliflower-like shapes were ejected as essential products. Petrological observation and chemical analyses of the essential ejecta and melt inclusions were carried out in order to investigate magma ascent and eruption processes. SEM images indicate that the essential bombs and lapilli have similar textures, which have many tiny bubbles, crystal-rich and glass-poor groundmass and microphenocrysts of plagioclase, augite and olivine. Black ash particles, which compose 40% of the air-fall ash from the explosion, also have similar textures to the essential bombs. Whole-rock analyses show that the chemical composition of all essential ejecta is basaltic (SiO2=51–52 wt%). Chemical analyses of melt inclusions in plagioclase and olivine phenocrysts indicate that melt in the magma had 0.9–1.9 wt% H2O, <0.011 wt% CO2, 0.04–0.17 wt% S and 0.06–0.1 wt% Cl. The variation in volatile content suggests degassing of the magma during ascent up to a depth of about 1 km. The ratio of H2O and S content of melt inclusions is similar to that of volcanic gas, which has been intensely and continuously emitted from the summit since the end of August 2000, indicating that the 18 August magma is the source of the gas emission. Based on the volatile content of the melt inclusions and the volcanic gas composition, the initial bulk volatile content of the magma was estimated to be 1.6–1.9 wt% H2O, 0.08–0.1 wt% CO2, 0.11–0.17 wt% S and 0.06–0.07 wt% Cl. The basaltic magma ascended from a deeper chamber (10 km) due to decrease in magma density caused by volatile exsolution with pressure decrease. The highly vesiculated magma, which had at least 30 vol% bubbles, may have come into contact with ground water at sea level causing the large explosion of 18 August 2000.Editorial responsibility: S. Nakada, T. DuittAn erratum to this article can be found at  相似文献   

7.
Ash fallout collected during 4 days of sampling at Stromboli confirms that a crystal-rich (HP) degassed magma erupts during the Strombolian explosions that are characteristic of the normal activity of this volcano. We identified 3 different types of juvenile ash fragments (fluidal, spongy and dense), which formed through different mechanisms of fragmentation of the low-viscosity, physically heterogeneous (in terms of the size and spatial distribution of bubbles) shoshonitic magma. A small amount (less than 3 vol%) of volatile-rich magma with low porphyricity (LP), erupted as highly vesicular ash fragments, has been collected, together with the HP magma, during normal strombolian explosions. Laboratory experiments and the morphological, textural and compositional investigations of ash fragments reveal that the LP ash is fresh and not recycled from the last paroxysm (15 March 2007). We suggest that small droplets of LP magma are dragged to the surface by the time-variable but persistent supply of deep derived CO2-rich gas bubbles. This coupled ascent of bubbles and LP melts is transient and does not perturb the dynamics of the HP magma within the shallow reservoir. This finding provides a new perspective on how the Stromboli volcano works and has important implications for monitoring strategies.  相似文献   

8.
Geologic mapping on a scale of 1:10000 and detailed stratigraphic studies of lava flows and tephra deposits of the Arenal-Chato volcanic system reveal a complex and cyclic volcanic history. This cyclicity provides insight into the evolution of magma batches during the growth of the andesitic volcanic system. The Arenal and Chato volcanoes have a central zone comprised of a lava armor and a distal zone comprised of a tephra apron. During Arenal's last two eruptive periods major craters formed near intersections of regional fractures at the lava armortephra apron transition. We suggest that such intersections are potential sites for future major explosions. The earliest rocks, i.e., the Chato lava flows, range in composition from basaltic andesite to andesite. These rocks, except for the andesitic domes of Chatito and La Espina, appear to have evolved from a common parental magma. The last active period of Chato volcano occurred 3550 B. P. The earliest known activity of Arenal volcano is 2900 B. P. Arenal lava flows have 54–56 wt% SiO2 and may be subdivided into a high-alumina group (HAG, Al2O3 = 20 wt%) and a low-alumina group (LAG, Al2O3 = 19 wt%). Compared to the HAG, the LAG also has smaller amounts of incompatible elements and higher amounts of FeO and MgO. Arenal tephra deposits were emplaced by Plinian-Sub-Plinian explosions occurring at 300±150-yr intervals. These deposits are compositionally zoned and alternate between dacite and basalt. The stratigraphy reveals an apparent magmatic cycle consisting of (a) dacitic-andesitic tephra, (b) HAG lava flows, (c) LAG lava flows, and (d) andesitic-basaltic tephra. This magmatic cycle is repeated four times during Arenal's history and is interpreted to have developed by the crystal fractionation and crystal redistribution of a single magma batch. The period of this cycle, and consequently the life of a magma batch, is about 800 years. If the cyclic pattern continues, a basaltic explosive phase may occur in the next 250 years.  相似文献   

9.
 Investigation of well-exposed volcaniclastic deposits of Shiveluch volcano indicates that large-scale failures have occurred at least eight times in its history: approximately 10,000, 5700, 3700, 2600, 1600, 1000, 600 14C BP and 1964 AD. The volcano was stable during the Late Pleistocene, when a large cone was formed (Old Shiveluch), and became unstable in the Holocene when repetitive collapses of a portion of the edifice (Young Shiveluch) generated debris avalanches. The transition in stability was connected with a change in composition of the erupting magma (increased SiO2 from ca. 55–56% to 60–62%) that resulted in an abrupt increase of viscosity and the production of lava domes. Each failure was triggered by a disturbance of the volcanic edifice related to the ascent of a new batch of viscous magma. The failures occurred before magma intruded into the upper part of the edifice, suggesting that the trigger mechanism was indirectly associated with magma and involved shaking by a moderate to large volcanic earthquake and/or enhancement of edifice pore pressure due to pressurised juvenile gas. The failures typically included: (a) a retrogressive landslide involving backward rotation of slide blocks; (b) fragmentation of the leading blocks and their transformation into a debris avalanche, while the trailing slide blocks decelerate and soon come to rest; and (c) long-distance runout of the avalanche as a transient wave of debris with yield strength that glides on a thin weak layer of mixed facies developed at the avalanche base. All the failures of Young Shiveluch were immediately followed by explosive eruptions that developed along a similar pattern. The slope failure was the first event, followed by a plinian eruption accompanied by partial fountain collapse and the emplacement of pumice flows. In several cases the slope failure depressurised the hydrothermal system to cause phreatic explosions that preceded the magmatic eruption. The collapse-induced plinian eruptions were moderate-sized and ordinary events in the history of the volcano. No evidence for directed blasts was found associated with any of the slope failures. Received: 28 June 1998 / Accepted: 28 March 1999  相似文献   

10.
White Island is an active andesitic-dacitic composite volcano surrounded by sea, yet isolated from sea water by chemically sealed zones that confine a long-lived acidic hydrothermal system, within a thick sequence of fine-grained volcaniclastic sediment and ash. The rise of at least 106 m3 of basic andesite magma to shallow levels and its interaction with the hydrothermal system resulted in the longest historical eruption sequence at White Island in 1976–1982. About 107 m3 of mixed lithic and juvenile ejecta was erupted, accompanied by collapse to form two coalescing maar-like craters. Vent position within the craters changed 5 times during the eruption, but the vents were repeatedly re-established along a line linking pre-1976 vents. The eruption sequence consisted of seven alternating phases of phreatomagmatic and Strombolian volcanism. Strombolian eruptions were preceded and followed by mildly explosive degassing and production of incandescent, blocky juvenile ash from the margins of the magma body. Phreatomagmatic phases contained two styles of activity: (a) near-continuous emission of gas and ash and (b) discrete explosions followed by prolonged quiescence. The near-continuous activity reculted from streaming of magmatic volatiles and phreatic steam through open conduits, frittering juvennile shards from the margins of the magma and eroding loose lithic particles from the unconsolidated wall rock. The larger discrete explosions produced ballistic block aprons, downwind lobes of fall tephra, and cohesive wet surge deposits confined to the main crater. The key features of the larger explosions were their shallow focus, random occurrence and lack of precursors, and the thermal heterogeneity of the ejecta. This White Island eruption was unusual because of the low discharge rate of magma over an extended time period and because of the influence of a unique physical and hydrological setting. The low rate of magma rise led to very effective separation of magmatic volatiles and high fluxes of magmatic gas even during phreatic phases of the eruption. While true Strombolian phases did occur, more frequently the decoupled magmatic gas rose to interact with the conduit walls and hydrothermal system, producing phreatomagmatic eruptions. The form of these wet explosions was governed by a delicate balance between erosion and collapse of the weak conduit walls. If the walls were relatively stable, fine ash was slowly eroded and erupted in weak, near-continous phreatomagmatic events. When the walls were unstable, wall collapse triggered larger discrete phreatomagmatic explosions.  相似文献   

11.
Variations in D and 18O values with H2O contents and outlet temperatures indicate that the fumaroles of La Fossa crater have discharged mixtures of magmatic water and marine hydrothermal water, since 1979. The contribution of meteoric water was low in the period 1979–1982 and very low afterwards. The 18O values of the marine-hydrothermal component of +5 to +7.2 are due to isotopic exchange with the 18O-rich silicates of the rocks under high-temperature and low-permeability conditions. The 18O value of the magmatic end-member is generally +3.5 to +4.3, although values as high as +5.5 to +6.5 were reached in the summer of 1988, when magma degassing appears to have extended into the core of the magma body. The D values of the end-member were close to -20, typical of andesitic waters. Both the isotopic values and chemical data strongly support a dry model, consisting of a central magmatic gas column and a surrounding hydrothermal envelope, in which marine hydrothermal brines move along limited fracture zones to undergo total evaporation on approaching the conduits of magmatic fluids. The vents at the eastern and western boundaries of the fumarolic field are fed by fluids whose pressure is governed by the coexistence of vapor, liquid and halite, giving rise to a high risk of phreato magmatic explosions, should magma penetrate into these wet environments. Most La Fossa eruptions were triggered by an initial hydrothermal blast and continued with a series of phreatomagmatic explosions. The fluids discharged by the Forgia Vecchia fumaroles are mixed with meteoric water, which is largely evaporated, although subordinate loss of condensed steam may be responsible for scrubbing most of the acidic gas species. The temperatures and pressures, and the risk of a sudden pressure increase, are low. A boiling hydrothermal aquifer at 230° C is present underneath the Baia di Levante beach. This area has a minor risk of hydrothermal explosions.  相似文献   

12.
Karymskii Volcano typically shows explosive activity with great variations in the frequency and energy of explosions. This is demonstrated here for three time segments of the volcano’s activity (1970–1973, 1976–1980, and 1996–2000). We examine various types of seismic and acoustic emission as controlled by crater morphology and the character of activity. The explosion funnels migrated over the crater area, and the 1976 effusive-explosive eruption occurred at two centers of lava flow effusion; this is here explained by the fact that magma as it was moving along the conduit was stratified to form a set of vertical filaments. The shape of shock waves in air recorded in August 2011 favors the hypothesis that the leading explosive mechanism during that period was a fragmentation wave that was produced in a gas-charged, viscous, porous magma during decompression. One notices that the shape of some shock waves in air recorded in 2011 indicates the occurrence of air blasts above the crater. The air blasts may have been caused by combustible volcanic gases such as carbon monoxide and hydrogen (CO and H2), which entered the atmosphere in sufficient amounts.  相似文献   

13.
We compare eruptive dynamics, effects and deposits of the Bezymianny 1956 (BZ), Mount St Helens 1980 (MSH), and Soufrière Hills volcano, Montserrat 1997 (SHV) eruptions, the key events of which included powerful directed blasts. Each blast subsequently generated a high-energy stratified pyroclastic density current (PDC) with a high speed at onset. The blasts were triggered by rapid unloading of an extruding or intruding shallow magma body (lava dome and/or cryptodome) of andesitic or dacitic composition. The unloading was caused by sector failures of the volcanic edifices, with respective volumes for BZ, MSH, and SHV c. 0.5, 2.5, and 0.05 km3. The blasts devastated approximately elliptical areas, axial directions of which coincided with the directions of sector failures. We separate the transient directed blast phenomenon into three main parts, the burst phase, the collapse phase, and the PDC phase. In the burst phase the pressurized mixture is driven by initial kinetic energy and expands rapidly into the atmosphere, with much of the expansion having an initially lateral component. The erupted material fails to mix with sufficient air to form a buoyant column, but in the collapse phase, falls beyond the source as an inclined fountain, and thereafter generates a PDC moving parallel to the ground surface. It is possible for the burst phase to comprise an overpressured jet, which requires injection of momentum from an orifice; however some exploding sources may have different geometry and a jet is not necessarily formed. A major unresolved question is whether the preponderance of strong damage observed in the volcanic blasts should be attributed to shock waves within an overpressured jet, or alternatively to dynamic pressures and shocks within the energetic collapse and PDC phases. Internal shock structures related to unsteady flow and compressibility effects can occur in each phase. We withhold judgment about published shock models as a primary explanation for the damage sustained at MSH until modern 3D numerical modeling is accomplished, but argue that much of the damage observed in directed blasts can be reasonably interpreted to have been caused by high dynamic pressures and clast impact loading by an inclined collapsing fountain and stratified PDC. This view is reinforced by recent modeling cited for SHV. In distal and peripheral regions, solids concentration, maximum particle size, current speed, and dynamic pressure are diminished, resulting in lesser damage and enhanced influence by local topography on the PDC. Despite the different scales of the blasts (devastated areas were respectively 500, 600, and >10 km2 for BZ, MSH, and SHV), and some complexity involving retrogressive slide blocks and clusters of explosions, their pyroclastic deposits demonstrate strong similarity. Juvenile material composes >50% of the deposits, implying for the blasts a dominantly magmatic mechanism although hydrothermal explosions also occurred. The character of the magma fragmented by explosions (highly viscous, phenocryst-rich, variable microlite content) determined the bimodal distributions of juvenile clast density and vesicularity. Thickness of the deposits fluctuates in proximal areas but in general decreases with distance from the crater, and laterally from the axial region. The proximal stratigraphy of the blast deposits comprises four layers named A, B, C, D from bottom to top. Layer A is represented by very poorly sorted debris with admixtures of vegetation and soil, with a strongly erosive ground contact; its appearance varies at different sites due to different ground conditions at the time of the blasts. The layer reflects intense turbulent boundary shear between the basal part of the energetic head of the PDC and the substrate. Layer B exhibits relatively well-sorted fines-depleted debris with some charred plant fragments; its deposition occurred by rapid suspension sedimentation in rapidly waning, high-concentration conditions. Layer C is mainly a poorly sorted massive layer enriched by fines with its uppermost part laminated, created by rapid sedimentation under moderate-concentration, weakly tractive conditions, with the uppermost laminated part reflecting a dilute depositional regime with grain-by-grain traction deposition. By analogy to laboratory experiments, mixing at the flow head of the PDC created a turbulent dilute wake above the body of a gravity current, with layer B deposited by the flow body and layer C by the wake. The uppermost layer D of fines and accretionary lapilli is an ash fallout deposit of the finest particles from the high-rising buoyant thermal plume derived from the sediment-depleted pyroclastic density current. The strong similarity among these eruptions and their deposits suggests that these cases represent similar source, transport and depositional phenomena.  相似文献   

14.
Shallow intrusion of magma caused phreatic explosions and mud flows at the snow-covered summit of Chokai volcano, northeast Honshu, Japan, after 153 years of dormancy. Total heat emission by the eruption is estimated at more than 3.0 × 1021 erg. Equivalent amount of magma is about 2.2 × 108 ton. Focal mechanisms of the associated volcanic earthquakes, which had been variable during the period of eruption. became stable after the cessation of the surface activity with pressure axis in a NW direction which is also the strike of the epicenter distribution. This temporal change of focal mechanisms may be interpreted as the result of propagation of increased pore pressure in the direction of the maximum pressure in the post eruptive period. The magmatic pressure which certainly predominated during the eruption period and caused carthquakes with variable mechanisms, decreased through surface activity.  相似文献   

15.
Microtextural characteristics of fresh ejecta from Stromboli volcano were examined from three periods of differing eruption style and intensity in 2002. Activity shifted from relatively weak and infrequent ash-charged explosions during January through May into two broad cycles of waxing activity in June through late September, and late September through December, followed by the onset on 28 December of the 2002/2003 effusive eruption. Analyzed sets of lapilli from May, September/October, and 28 December show contrasts in the physical properties of magma resident in the shallow conduit during this range of activity. Three distinct textures are observed among the analyzed pyroclasts: low density (LD) with an abundance of subspherical bubbles, the presence of large, irregularly shaped bubbles, and a light-to-transparent glass matrix; transitional texture (TT) with an intermediate number of subspherical bubbles, a high frequency of large, irregularly-shaped bubbles, and a honey colored glass matrix; and high density (HD) with sparse relatively small bubbles, conspicuous large irregular bubbles, and a dark glass matrix. Observational and quantitative data (density, vesicle size) indicate that these textures are linked through variable residence time in Stromboli’s shallow conduit, with an ongoing evolution from LD to HD magma. Calculations suggest that residual LD magma will evolve to HD texture in a period of hours to days. Contrasting amounts of the LD, TT, and HD magmas are present in each sample, with the most TT in May, the most LD in September/October, and the most HD in December. This implies that the shallow magma had a different rheology at each collection period. The viscosity of LD and HD magmas are calculated to be in the range of 2,000 to 2,600 and 3,000 to 5,000 Pa s, respectively, which, with their changing proportions, must have implications for rates of bubble slug ascent and processes of fragmentation. This study suggests that an increasing maturity of magma in Stromboli’s shallow conduit (with resultant increase in viscosity) feeds back to reduce the intensity of explosions, whereas a steady flux of LD magma favors more powerful explosions.  相似文献   

16.
Chronology and products of the 2000 eruption of Miyakejima Volcano, Japan   总被引：1，自引：1，他引：0  
Lateral migration of magma away from Miyakejima volcanic island, Japan, generated summit subsidence, associated with summit explosions in the summer of 2000. An earthquake swarm beneath Miyakejima began on the evening of 26 June 2000, followed by a submarine eruption the next morning. Strong seismic activity continued under the sea from beneath the coast of Miyakejima to a few tens of kilometers northwest of the island. Summit eruptive event began with subsidence of the summit on 8 July and both explosions and subsidence continued intermittently through July and August. The most intense eruptive event occurred on 18 August and was vulcanian to subplinian in type. Ash lofted into the stratosphere fell over the entire island, and abundant volcanic bombs were erupted at this time. Another large explosion took place on 29 August. This generated a low-temperature pyroclastic surge, which covered a residential area on the northern coast of the island. The total volume of tephra erupted was 9.3×106 m3 (DRE), much smaller than the volume of the resulting caldera (6×108 m3). Migration of magma away from Miyakejima was associated with crustal extension northwest of Miyakejima and coincident shrinkage of Miyakejima Island itself during July–August 2000. This magma migration probably caused stoping of roof rock into the magma reservoir, generating subsurface cavities filled with hydrothermal fluid and/or magmatic foam and formation of a caldera (Oyama Caldera) at the summit. Interaction of hydrothermal fluid with ascending magma drove a series of phreatic to phreatomagmatic eruptions. It is likely that new magma was supplied to the reservoir from the bottom during waning stage of magmas migration, resulting in explosive discharge on 18 August. The 18 August event and phreatic explosions on 29 August produced a conduit system that allowed abundant SO2 emission (as high as 460 kg s–1) after the major eruptive events were over. At the time of writing, inhabitants of the island (about 3,000) have been evacuated from Miyakejima for more than 3 years.  相似文献   

17.
A type example of Vulcanian eruptive dynamics is the series of 88 explosions that occurred between August and October 1997 at Soufrière Hills volcano on Montserrat Island. These explosions are interpreted to be caused by the pressurization of a conduit by a shallow highly crystalline and degassed magma plug. We test such an interpretation by combining the pressures and porosities of the pre-explosive magma column proposed by Burgisser et al. (2010, doi:10.1016/j.jvolgeores.2010.04.008) into a physical model that reconstructs a depth-referenced density profile of the column for four mechanisms of pressure buildup. Each mechanism yields a different overpressure profile: 1) gas accumulation, 2) conduit wall elasticity, 3) microlite crystallization, and 4) magma flowage. For the first three mechanisms, the three-part vertical layering of the conduit prior to explosion was spatially distributed as a dense cap atop the conduit with a thickness of a few tens of meters, a transition zone of 400–700 m with heterogeneous vesicularities, and, at greater depth, a more homogeneous, low-porosity zone that brings the total column length to ~ 3.5 km. A shorter column can be obtained with mechanism 4: a dense cap of less than a few meters, a heterogeneous zone of 200–500 m, and a total column length as low as 2.5 km. Inflation/deflation cycles linked to a periodic overpressure source offer a dataset that we use to constrain the four overpressure mechanisms. Magma flowage is sufficient to cause periodic edifice deformation through semi-rigid conduit walls and build overpressures able to trigger explosions. Gas accumulation below a shallow plug is also able to build such overpressures and can occur regardless of magma flowage. The concurrence of these three mechanisms offers the highest likelihood of building overpressures leading to the 1997 explosion series. We also explore the consequences of sudden (eruptive) overpressure release on our magmatic columns to assess the role of syn-explosive vesiculation and pre-fragmentation column expansion. We find that large shallow overpressures and efficient syn-explosive vesiculation cause the most dramatic pre-fragmentation expansion. This leads us to depict two end-member pictures of a Vulcanian explosion. The first case corresponds to the widely accepted view that the downward motion of a fragmentation front controls column evacuation. In the second case, syn-explosive column expansion just after overpressure release brings foamed-up magma up towards an essentially stationary and shallow fragmentation front.  相似文献   

18.
 Fragmentation, or the "coming apart" of magma during a plinian eruption, remains one of the least understood processes in volcanology, although assumptions about the timing and mechanisms of fragmentation are key parameters in all existing eruption models. Despite evidence to the contrary, most models assume that fragmentation occurs at a critical vesicularity (volume percent vesicles) of 75–83%. We propose instead that the degree to which magma is fragmented is determined by factors controlling bubble coalescence: magma viscosity, temperature, bubble size distribution, bubble shapes, and time. Bubble coalescence in vesiculating magmas creates permeability which serves to connect the dispersed gas phase. When sufficiently developed, permeability allows subsequent exsolved and expanded gas to escape, thus preserving a sufficiently interconnected region of vesicular magma as a pumice clast, rather than fully fragmenting it to ash. For this reason pumice is likely to preserve information about (a) how permeability develops and (b) the critical permeability needed to insure clast preservation. We present measurements and calculations that constrain the conditions (vesicularity, bubble size distribution, time, pressure difference, viscosity) necessary for adequate permeability to develop. We suggest that magma fragments explosively to ash when and where, in a heterogeneously vesiculating magma, these conditions are not met. Both the development of permeability by bubble wall thinning and rupture and the loss of gas through a permeable network of bubbles require time, consistent with the observation that degree of fragmentation (i.e., amount of ash) increases with increasing eruption rate. Received: 5 July 1995 / Accepted: 27 December 1995  相似文献   

19.
Subsurface geothermal exploration has considerably added to our knowledge of the Latera volcanic complex. A syenitic body is located about 2 km below the present-day surface; K-Ar data point a 0.9 Ma age. The primary magma was a silica-saturated trachyte; undersaturated, hauyne-bearing products are found near the carbonatic wall-rocks and have been interpreted as reaction products. Subsurface data from deep drilling and geophysical surveys suggest that the Latera caldera resulted from three main successive collapse phases: (i) formation of an old caldera, now buried, related to the eruption of ignimbrites from the syenitic magma chamber; (ii) sinking of the eastern sector as a consequence of the formation of the nearby Bolsena caldera (0.3 Ma); (iii) multistage formation of the present Latera caldera (0.16 Ma).  相似文献   

20.
A steady-state, one-dimensional, and nonhomogeneous two-phase flow model was developed for the prediction of local flow properties in volcanic conduits. The model incorporates the effects of relative velocity between the phases and for the variable magma viscosity. The resulting set of nonlinear differential equations was solved by a stiff numerical solver and the results were verified with the results of basaltic fissure eruptions obtained by a homogeneous two-phase flow model, before applying the model to the eruptions of Mt. St. Helens and Vesuvius volcanoes. This verification, and a study of the sensitivity of several modeling parameters, proved effective in establishing the confidence in the predicted nonequilibrium results of flow distribution in the conduits when the mass flow rate is critical or maximum. The application of the model to the plinian eruptions of Mt. St. Helens on May 18, 1980, and Vesuvius in AD 79, demonstrates the sensitivity of the magma discharge rate and distributions of pressure, volumetric fraction, and velocities of phases, on the hydrous magma viscosity feeding the volcanic conduits. Larger magma viscosities produce smaller mass discharge rates (or greater conduit diameters), smaller exit pressures, larger disequilibrium between the phases, and larger difference between the local lithostatic and fluid pressures in the conduit. This large pressure difference occurs when magma fragments and may cause a rupture of the conduit wall rocks, producing a closure of the conduit and cessation of the volcanic eruption, or water pouring into the conduit from underground aquifers leading to phreatomagmatic explosions. The motion of the magma fragmentation zone along a conduit during an eruption can be caused by the varying viscosity of magma feeding the volcanic conduit and may cause intermittent phreatomagmatic explosions during the plinian phases as different underground aquifers are activated at different depths. The variation of magma viscosity during the eruptions of Mt. St. Helens in 1980 and Vesuvius in AD 79 is normally associated with the tapping of magmas from different depths of the magma chambers. This variation of viscosity, which can include different crystal and dissolved water contents, can also produce conduit wall erosion, the onset and collapse of volcanic columns above the vent, and the onset and cessation of pyroclastic flows and surges.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号