首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The presence of non‐erodible roughness elements on erodible surfaces has the effect of absorbing part of the wind shear stress and thus protecting the erodible surface from wind erosion. This paper examines the shear stress distribution over roughness arrays of varying density, representing the progress of erosion on a bed of erodible and non‐erodible particles. Three‐dimensional numerical simulations, simulating wind flow over a bed of particles covered by roughness elements, were conducted in order to investigate the effect of roughness elements on the shear stress near the surface. The results of these simulations confirm that the erosion of soil by wind is strongly attenuated by the presence of roughness elements on the surface and depends on the geometric properties of the roughness elements. Based on the new numerical results obtained, a refinement of existing theoretical approaches is developed to describe the dependence of the friction velocity upon roughness frontal area and real exposed cover rate. The new formulation proposed will allow a more accurate evaluation of shear stress partitioning as a function of topographic changes. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

2.
  相似文献   

3.
Soil surface microtopography produces non‐uniform surface run‐off, in which narrow threads of relatively deep and fast ?ow move within broader, shallower, slower‐moving regions. This kind of ?ow is probably widespread, given that microtopography is itself common. Methods used to record the properties of surface run‐off include grid‐ or transect‐based depth observations, with a single mean ?ow speed derived by calculation from V = Q/WD, and the use of dye timing to estimate velocity, with an effective mean depth calculated from D = Q/WV. Because these methods allow only single, ?ow‐?eld mean values to be derived for V or D, neither is well suited to non‐uniform ?ows. The use of depth data to derive a ?ow‐?eld mean V furthermore implicitly applies area weighting to the depth data; likewise, the use of dye speeds for V inherently overestimates mean V because dye dominantly follows the faster ?ow threads. The associated errors in derived parameters such as friction coef?cients are not readily quanti?ed and appear not to have been addressed previously. New ?eld experiments made on untilled soil surfaces in arid western NSW, Australia, explore these circumstances and the implications for deriving meaningful measures of ?ow properties, including friction coef?cients. On surfaces deliberately chosen for their very subtle microtopography, average thread velocities are shown to be commonly 2·5 times greater than the ?ow‐?eld mean, and locally 6–7 times greater. On the other hand, non‐thread ?ow speeds lie below the ?ow‐?eld mean, on average reaching only 84 per cent of this value, and often considerably less. Flow‐?eld means conceal the existence of regions of the ?ow ?eld whose properties are statistically distinct. Results con?rm that a reliance on ?ow‐?eld average depths yields estimates of friction coef?cients that are biased toward the shallower, high‐roughness parts of the ?ow, while if dye speeds are relied upon the results are biased toward the deeper, smoother threads of ?ow. A new approach to the evaluation of friction coef?cients in non‐uniform ?ows is advanced, involving the determination of separate coef?cients for threads and non‐thread zones of the ?ow ?eld. In contrast, ?ow‐?eld friction coef?cients as they are customarily derived in run‐off plot experiments subsume these distinct coef?cients in proportions that are generally unknown. The value of such coef?cients is therefore questionable. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

4.
River restoration works often include measures to promote morphological diversity and enhance habitat suitability. One of these measures is the creation of macro‐roughness elements, such as lateral cavities and embayments, in the banks of channelized rivers. However, in flows that are heavily charged with fine sediments in suspension, such as glacier‐fed streams and very low‐gradient reaches of large catchment rivers, these lateral cavities may trap these sediments. Consequently, the morphological changes may be affected, and the functionality of the restoration interventions may be compromised. Herein, we analyse the influence of these macro‐roughness elements on the transport of fine sediments in the main channel. Laboratory tests with uniform flow charged with sediments in a channel with banks equipped with large‐scale rectangular roughness elements were carried out. The laboratory experiments covered a wide range of rectangular cavity geometrical configurations and shallowness ratios. The influence of key parameters such as flow shallowness, geometric ratios of the cavities and initial sediment concentration was tested. Surface particle image velocimetry, sediment samples and temporal turbidity records were collected during the experiments. The amount of sediments captured by the cavities, the temporal evolution of the concentration of sediments in suspension and the flow hydrodynamics are cross‐analysed and discussed. It is shown that the trapping efficiency of the macro‐roughness elements is a clear function of the channel geometry and the shallowness of the flow. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

5.
Friction coefficients in overland flows are customarily estimated from mean flow properties (depth, velocity, slope) that subsume spatial variations in flow arising from two major causes: microtopography and obstacles. This paper uses laboratory experiments in shallow flumes to examine the extent of non‐uniformity in flow conditions associated with each cause. Randomly placed emergent obstacles in a flume with a shallow axial channel generally yielded higher hydraulic roughness than the same pattern of obstacles on a planar flume, as well as greater variation in roughness as the obstacle locations were altered. In both flumes, hydraulic roughness fell with increasing Reynolds number for 10% obstacle cover, showed a flattening trend at 20% cover, and exhibited a convex‐downward trend at 30% obstacle cover. These results indicate the progressive onset of flow controls at narrow gaps in the obstacle field. In such flows, the use of mean flow properties conceals the existence of two main subdivisions of flow: flow filaments and backwater flows. In the experiments, flow filaments involved velocities more than twice the overall mean, whereas backwater flows were much slower than the mean. The existence of fast‐moving flow filaments may be significant in understanding soil transport in surface runoff, and backwater depths may modify splash detachment. Similarly, friction coefficients that fail to reflect these important non‐uniform flow components may not be optimal for hydraulic calculations or in erosion models. It is concluded that new approaches to observing and processing flow data may be required, in order to avoid the loss of important flow detail that is entailed in assuming uniform flow conditions. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

6.
The flow patterns in confluence channel and the simulation of confluence flow are more complex than that in straight channel. Additional terms in the momentum equations, i.e. dissipation terms, denoting the impact of turbulence, and dispersion terms, denoting the vertical non‐uniformity of velocity, show great impacts on the accuracy of numerical simulations. The dissipation terms, i.e. the product of eddy viscosity coefficient and velocity gradient, are much larger than those of the flow in straight channel. In this study, the zero equation model and the depth‐averaged k‐ε model are used to analyse the impact of eddy viscosity. Meanwhile, the dispersion terms in the momentum equation, depending on the vertical non‐uniformity of velocity, are usually neglected in routine simulation. With the use of detailed experimental data for verification, this study presents the distribution of parameters of vertical non‐uniformity and the intimated connection between non‐uniformity parameters and accuracy of numerical simulations of confluence flow with depth‐averaged models. The results present that simulation accuracy of confluence flow is very sensitive to the turbulence modes, which cannot be handled by normal, simple turbulence model. On the contrary, the impact of dispersion terms is both flow‐condition‐dependent and place‐dependent, and such impact is negligible when secondary circulation is weak. The results indicate the key elements in modelling confluence flow and are helpful for selecting suitable numerical model and solving engineering problems encountered in confluence channel. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

7.
Aggregation processes of fine sediments have rarely been integrated in numerical simulations of cohesive sediment transport in riverine systems. These processes, however, can significantly alter the hydrodynamic characteristics of suspended particulate matter (SPM), modifying the particle settling velocity, which is one of the most important parameters in modelling suspended sediment dynamics. The present paper presents data from field measurements and an approach to integrate particle aggregation in a hydrodynamic sediment transport model. The aggregation term used represents the interaction of multiple sediment classes (fractions) with corresponding multiple deposition behaviour. The k–ε–turbulence model was used to calculate the coefficient of vertical turbulent mixing needed for the two‐dimensional vertical‐plane simulations. The model has been applied to transport and deposition of tracer particles and natural SPM in a lake‐outlet lowland river (Spree River, Germany). The results of simulations were evaluated by comparison with field data obtained for two levels of river discharge. Experimental data for both discharge levels showed that under the prevailing uniform hydraulic conditions along the river reach, the settling velocity distribution did not change significantly downstream, whereas the amount of SPM declined. It was also shown that higher flow velocities (higher fluid shear) resulted in higher proportions of fast settling SPM fractions. We conclude that in accordance with the respective prevailing turbulence structures, typical aggregation mechanisms occur that continuously generate similar distribution patterns, including particles that settle toward the river bed and thus mainly contribute to the observed decline in the total SPM concentration. In order to determine time‐scales of aggregation and related mass fluxes between the settling velocity fractions, results of model simulations were fitted to experimental data for total SPM concentration and of settling velocity frequency distributions. The comparison with simulations for the case of non‐interacting fractions clearly demonstrated the practical significance of particle interaction for a more realistic modelling of cohesive sediment and contaminant transport. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

8.
The purpose of this paper is to examine the nature of particle saltation and movement over the beds of fixed roughness from flume experiments. A series of experiments are carried out to study the saltation of individual sand particles of different sizes over rough beds under different flow conditions. A 3‐D acoustic Doppler velocimeter is used to record the fluid velocity components; subsequently, under different flow conditions, the images of released sand particles are recorded using high‐speed video imaging technique. Systematic analysis is made with regard to the forces acting on the grains and the variation of their magnitudes along the saltation trajectories of the grains. Relations between the saltation parameters, flow intensity and bed roughness are developed. The distributions of the angle of orientations during a single saltation follows almost a Gaussian distribution. The shape of the Gaussian distribution depends on the particle size and bed roughness. Particle collisions with rough beds and the resulting coefficients of restitution are also discussed. A theoretical framework is developed to compute the mean particle velocity considering the spin in the energy balance equation. Results of the detailed analysis using the imaging technique are much better than in previously reported studies. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

9.
Velocity measurements carried out by an acoustic doppler velocimeter (ADV) in a rectangular laboratory ?ume having a gravel bed are presented. The velocity pro?les are measured in six verticals of the channel cross‐section having an increasing distance (from 4 to 38·5 cm) from the ?ume wall. The experimental runs are carried out for ?ve different bed arrangements, characterized by different concentrations of coarser elements, and for the two conditions of small‐ and large‐scale roughness. For both hydraulic conditions, the velocity measurements are ?rst used to test the applicability of the Dean pro?le and of the logarithmic pro?le corrected by a divergence function proposed in this paper. Then, for each value of the depth sediment ratio h/d84, the non‐dimensional friction factor parameter is calculated by integration of the measured velocity distributions in the different verticals of the cross‐section. Finally a semi‐logarithmic ?ow resistance equation is empirically deduced. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

10.
A generalized probabilistic model is developed in this study to predict sediment entrainment under the incipient motion, rolling, and pickup modes. A novelty of the proposed model is that it incorporates in its formulation the probability density function of the bed shear stress, instead of the near-bed velocity fluctuations, to account for the effects of both flow turbulence and bed surface irregularity on sediment entrainment. The proposed model incorporates in its formulation the collective effects of three para-meters describing bed surface irregularity, namely the relative roughness, the volumetric fraction and relative position of sediment particles within the active layer. Another key feature of the model is that it provides a criterion for estimating the lift and drag coefficients jointly based on the recognition that lift and drag forces acting on sediment particles are interdependent and vary with particle protrusion and packing density. The model was validated using laboratory data of both fine and coarse sediment and was compared with previously published models. The study results show that all the examined models perform adequately for the fine sediment data, where the sediment particles have more uniform gra-dation and relative roughness is not a factor. The proposed model was particularly suited for the coarse sediment data, where the increased bed irregularity was captured by the new parameters introduced in the model formulation. As a result, the proposed model yielded smaller prediction errors and physically acceptable values for the lift coefficient compared to the other models in case of the coarse sediment data.  相似文献   

11.
Laboratory experiments were performed with rain of uniform drop size (2·7 mm, 5·1 mm) impacting flows over non‐cohesive beds of uniform sized sand (0·11–0·9 mm) and coal (0·2–0·9 mm) particles with flow velocities (20 mm s?1, 40 mm s?1) that were insufficient for the flow to entrain the particles without the aid of raindrop impact. Measurement of particle travel distance under rain made up of 2·7 mm drops confirmed a theoretical relationship between settling velocity and the distance particles travel after being disturbed by drop impact. Although, in theory, a relationship between settling velocity and particle travel distance exists, settling velocity by itself was unable to account for the effect of changes in both particle size and density on sediment discharge from beds of uniform non‐cohesive material. Particle density was also a factor. Further study of how particle characteristics influence sediment discharge will aid modelling of the impact of the soil in process‐based models of erosion by rain‐impacted flow. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

12.
Landscapes subject to constant forcing tend to evolve toward equilibrium states in which individual landforms have similar characteristics. Yet, even in landscapes at or near equilibrium, there can be significant variability among individual landforms. Furthermore, sites subject to similar processes and conditions can have different mean landform characteristics. This variability is often ascribed to on‐going transient evolution, or to heterogeneity in processes, material properties, forcing, or boundary conditions. Three surprising outcomes of landform evolution models suggest, however, that such variability could arise in equilibrium landscapes without any heterogeneity in the physical processes shaping the topography. First, homogeneous systems subjected to constant forcing can generate a heterogeneous distribution of equilibrium landforms. Second, even simple non‐linear systems can have multiple stable equilibrium states. Third, evolving landscapes can exhibit path dependence and hysteresis. We show how these three mechanisms can produce variability in landforms that arises from the characteristics of the initial topographic surface rather than from heterogeneity in geomorphic processes. Numerical experiments on the formation of low‐order fluvial valleys and transportational cyclic steps in erodible streambeds illustrate why it is important to consider the influence of initial conditions when comparing models with natural topography, estimating the uncertainty of model predictions, and studying how landscapes respond to disturbances. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

13.
Aerodynamic roughness length (z0), the height above the ground surface at which the extrapolated horizontal wind velocity profile drops to zero, is one of the most poorly parameterised elements of the glacier surface energy balance equation. Microtopographic methods for estimating z0 have become prominent in the literature in recent years, but are rarely validated against independent measures and are yet to be comprehensively analysed for scale or data resolution dependency. Here, we present the results of a field investigation conducted on the debris covered Khumbu Glacier during the post‐monsoon season of 2015. We focus on two sites. The first is characterised by gravels and cobbles supported by a fine sandy matrix. The second comprises cobbles and boulders separated by voids. Vertical profiles of wind speed recorded by a tower comprising five cup anemometers and deployed over both sites enable us to derive measurements of aerodynamic roughness that reflect their observed surface characteristics (0.0184 m and 0.0243 m, respectively). At the second site, z0 also varied through time following snowfall (0.0055 m) and during its subsequent melt (0.0129 m), showing the importance of fine resolution topography for near‐surface airflow. To compare the wind profile data with microtopographic methods, we conducted structure from motion multi‐view stereo (SfM‐MVS) surveys across each patch and calculated z0 using three previously published approaches. The fully three‐dimensional cloud‐based approach is shown to be most stable across different scales and these z0 values are most correct in relative order when compared with the wind tower data. Popular profile‐based methods perform less well providing highly variable values across different scales and when using data of differing resolution. These findings hold relevance for all studies using microtopographic methods to estimate aerodynamic roughness lengths, including those in non‐glacial settings. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

14.
Compensation for geometrical spreading along the ray‐path is important in amplitude variation with offset analysis especially for not strongly attenuative media since it contributes to the seismic amplitude preservation. The P‐wave geometrical spreading factor is described by a non‐hyperbolic moveout approximation using the traveltime parameters that can be estimated from the velocity analysis. We extend the P‐wave relative geometrical spreading approximation from the rational form to the generalized non‐hyperbolic form in a transversely isotropic medium with a vertical symmetry axis. The acoustic approximation is used to reduce the number of parameters. The proposed generalized non‐hyperbolic approximation is developed with parameters defined by two rays: vertical and a reference rays. For numerical examples, we consider two choices for parameter selection by using two specific orientations for reference ray. We observe from the numerical tests that the proposed generalized non‐hyperbolic approximation gives more accurate results in both homogeneous and multi‐layered models than the rational counterpart.  相似文献   

15.
A series of 188 rainfall plot simulations was conducted on grass, shrub, oak savanna, and juniper sites in Arizona and Nevada. A total of 897 flow velocity measurements were obtained on 3.6% to 39.6% slopes with values ranging from 0.007 m s‐1 to 0.115 m s‐1. The experimental data showed that shallow flow velocity on rangelands was related to discharge and ground litter cover and was largely independent of slope gradient or soil characteristics. A power model was proposed to express this relationship. These findings support the slope–velocity equilibrium hypothesis. Namely, eroding soil surfaces evolve such that steeper areas develop greater hydraulic roughness. As a result overland flow velocity becomes independent of the slope gradient over time. Our findings have implications for soil erosion modeling suggesting that hydraulic friction is a dynamic, slope and discharge dependent property. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

16.
Vertical velocity profiles measured over various bed configurations (plane beds, ripples, and dunes) in. the meandering River South Esk, Glen Clova, Scotland are presented on semilogarithmic paper. Local bed shear stress and roughness height are calculated from the lowermost parts of the profiles using the Karman-Prandtl law of the wall; these parameters, and the geometrical properties of the profiles, are related to the various bed configurations. A graphical model is used to identify profiles developed on specific regions of dune geometry, in order to discriminate those profiles that define bed shear effective in transporting sediment over dunes. An assessment is made of the errors involved in estimating local mean velocity from extrapolating the law of the wall to the water surface. A Darcy-Weisbach friction coefficient is related to bed configuration and local stream power.  相似文献   

17.
Many numerical landform evolution models assume that soil erosion by flowing water is either purely detachment‐limited (i.e. erosion rate is related to the shear stress, power, or velocity of the flow) or purely transport‐limited (i.e. erosion/deposition rate is related to the divergence of shear stress, power, or velocity). This paper reviews available data on the relative importance of detachment‐limited versus transport‐limited erosion by flowing water on soil‐mantled hillslopes and low‐order valleys. Field measurements indicate that fluvial and slope‐wash modification of soil‐mantled landscapes is best represented by a combination of transport‐limited and detachment‐limited conditions with the relative importance of each approximately equal to the ratio of sand and rock fragments to silt and clay in the eroding soil. Available data also indicate that detachment/entrainment thresholds are highly variable in space and time in many landscapes, with local threshold values dependent on vegetation cover, rock‐fragment armoring, surface roughness, soil texture and cohesion. This heterogeneity is significant for determining the form of the fluvial/slope‐wash erosion or transport law because spatial and/or temporal variations in detachment/entrainment thresholds can effectively increase the nonlinearity of the relationship between sediment transport and stream power. Results from landform evolution modeling also suggest that, aside from the presence of distributary channel networks and autogenic cut‐and‐fill cycles in non‐steady‐state transport‐limited landscapes, it is difficult to infer the relative importance of transport‐limited versus detachment‐limited conditions using topography alone. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

18.
A key problem in computational fluid dynamics (CFD) modelling of gravel‐bed rivers is the representation of multi‐scale roughness, which spans the range from grain size, through bedforms, to channel topography. These different elements of roughness do not clearly map onto a model mesh and use of simple grain‐scale roughness parameters may create numerical problems. This paper presents CFD simulations for three cases: a plane bed of fine gravel, a plane bed of fine gravel including large, widely‐spaced pebble clusters, and a plane gravel bed with smaller, more frequent, protruding elements. The plane bed of fine gravel is modelled using the conventional wall function approach. The plane bed of fine gravel including large, widely‐spaced pebble clusters is modelled using the wall function coupled with an explicit high‐resolution topographic representation of the pebble clusters. In these cases, the three‐dimensional Reynolds‐averaged continuity and Navier–Stokes equations are solved using the standard k ? ε turbulence model, and model performance is assessed by comparing predicted results with experimental data. For gravel‐bed rivers in the field, it is generally impractical to map the bed topography in sufficient detail to enable the use of an explicit high‐resolution topography. Accordingly, an alternative model based on double‐averaging is developed. Here, the flow calculations are performed by solving the three‐dimensional double‐averaged continuity and Navier‐Stokes equations with the spatially‐averaged 〈k ? ε〉 turbulence model. For the plane bed of fine gravel including large, widely‐spaced pebble clusters, the model performance is assessed by comparing the spatially‐averaged velocity with the experimental data. The case of a plane gravel bed with smaller, more frequent, protruding elements is represented by a series of idealized hypothetical cases. Here, the spatially‐averaged velocity and eddy viscosity are used to investigate the applicability of the model, compared with using the explicit high‐resolution topography. The results show the ability of the model to capture the spatially‐averaged flow field and, thus, illustrate its potential for representing flow processes in natural gravel‐bed rivers. Finally, practical data requirements for implementing such a model for a field example are given. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

19.
In this paper, different formulations of a macro‐element model for non‐linear dynamic soil‐structure interaction analyses of structures lying on shallow foundations are first reviewed, and secondly, a novel formulation is introduced, which combines some of the characteristics of previous approaches with several additional features. This macro‐element allows one to model soil‐footing geometric (uplift) and material (soil plasticity) non‐linearities that are coupled through a stiffness degradation model. Footing uplift is introduced by a simple non‐linear elastic model based on the concept of effective foundation width, whereas soil plasticity is treated by means of a bounding surface approach in which a vertical load mapping rule is implemented. This mapping is particularly suited for the seismic loading case for which the proposed model has been conceived. The new macro‐element is subsequently validated using cyclic and dynamic large‐scale laboratory tests of shallow foundations on dense sand, namely: the TRISEE cyclic tests, the Public Works Research Institute and CAMUS IV shaking table tests. Based on this comprehensive validation process against a set of independent experimental results, a unique set of macro‐element parameters for shallow foundations on dense sand is proposed, which can be used to perform predictive analyses by means of the present model. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

20.
The effect of a step change in macro‐roughness on the saltation process under sediment supply limited conditions was examined in the atmospheric boundary layer. For an array of roughness elements of roughness density λ = 0.045 (λ = total element frontal area/total surface area of the array) the horizontal saltation flux was reduced by 90% (±7%) at a distance of ≈150 roughness element heights into the array. This matches the value predicted using an empirical design model and provides confidence that it can be effectively used to engineer roughness arrays to meet sand flux reduction targets. Measurements of the saltation flux characteristics in the vertical dimension, including: saltation layer decay (e‐folding) height and particle size, revealed that with increasing distance into the array, the rate of mass flux change with increasing height decreased notably, and (geometric) mean particle diameter decreased. The distribution of the saltation mass flux in the vertical remains exponential in form with increasing distance into the roughness array, and the e‐folding height increases as well as increasing at a greater rate as particle diameter diminishes. The increase in e‐folding height suggests the height of saltating particles is increasing along with their mean speed. This apparent increase in mean speed is likely due to the preferential removal, or sequestration, of the slower moving particles across the size spectrum, as they travel through the roughness array. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号