共查询到20条相似文献,搜索用时 156 毫秒
1.
南澳强震区北部柘林地区断层气的测试结果表明,北西向黄岗水断裂带的主干断裂断层气含量较高,次级断裂和其它方向断裂的断层气含量较低,根据断层气异常,结合断裂新活动的表现形式和地震分布特征,大致可将区内断裂的活动性划分为三类。 相似文献
2.
沂沭断裂带及其附近断裂的断层泥分形特征及其地震地质意义 总被引:7,自引:0,他引:7
利用岩石碎裂数目的分形理论,分析,计算了沂沭断裂带及其西侧北西向断裂的断层泥粒度成分的分维值,讨论了断层泥粒度成分分维的地震地质意义,研究结果表明,沂沭断裂带内的断裂活动的强度大于北西向断裂活动强度;F2是沂沭断裂带中活动最强的一条断裂,断层泥粒度成分分维值可作为表征断裂活动时代,破裂形式和断层泥形成斫代等的参量;分维值还与断层泥的母岩,厚度,粘土矿物含量和所处的断裂部位等相关。 相似文献
3.
当探槽开挖长度未跨过断层变形带时,得到的断层垂直位移将偏离断层活动的真实情况,在缺少依据帮助确定断层陡坎原始下坡角的具体位置时,通过断层陡坎高度获得的断层垂直位移也将与实际情况有较大的偏离,文中对此进行了讨论。并讨论了应用断层两侧近水平地层累积变位量的分解确定古地震事件期次的方法,以及探槽剖面中断层两侧同层地层厚度差异是断层活动事件的反映等问题。引用了内蒙古大青山山前断裂和狼山山前断裂、北京平原夏垫断裂和南口-孙河断裂及日本丹那断层探槽开挖的实例。 相似文献
4.
5.
6.
7.
对毛毛山断裂带断层岩进行了宏观及微观的观察和分析,特别是对断层岩中石英颗粒的形貌特征、溶蚀类型及断层岩的组分进行了研究。结果表明该断裂是一条具有多期活动的全新世活动断裂.滑动性质以粘滑为主,断裂的东段较西段更为明显。 相似文献
8.
9.
10.
新疆南疆重镇库尔勒市及附近地区,至少分布着9条颇具规模的活动断裂。尤其斜切库尔勒市区北部的库尔勒断裂,新活动十分强烈。库尔勒断裂东段与兴地断裂西段很可能是连通的一条地震破裂段,两者均存在着丰富的多期次古地震事件的遗迹,为较稳定的断层“破裂单元”。该破裂段上现代地震活动异常平静,但发现了明显的蠕滑错开形迹。这种地震的发生与断层滑动不协调现象,说明断层运动受到了抑制,能量在某处得以积累,有酿成大震的条件和危险。 相似文献
11.
以水平裂缝分布的孔隙介质模型为基础,建立了水平裂缝面的平行裂缝分布和带粗糙表面的点接触裂缝模型,导出了两类裂缝模型的水平和垂直电阻率响应关系,分析了两类裂缝模型在没有围压和存在围压条件下的水平电阻率、垂直电阻率变化规律和电各向异性系数的变化特征.讨论了裂缝开度、裂缝密度和裂缝粗糙度等裂缝特征参数对裂缝性储层电各向异性的影响.为简化讨论,所有电性响应特征的分析都忽略了裂缝和孔隙表面的导电性和极化的影响.利用平行分布水平裂缝面模型和带粗糙面的裂缝模型,考察了围压条件下的裂缝性岩石的电各向异性响应特征,得到了对实际应用有意义的结果. 相似文献
12.
理论研究[1]表明,环境水介质的动态对岩石中裂缝的应力腐蚀过程有很大的影响。但迄今为止,岩石的应力腐蚀实验都是在水介质静止情况下作的。本实验对比研究了蒸馏水静止和流动情况下云南大理岩试件应力腐蚀引起的亚临界裂缝扩展特征。结果表明,裂缝周围水介质的流动会加速裂缝端部的应力腐蚀过程,这对于震源过程及临震前兆的研究可能有重要意义。样品采用紧凑拉伸试件,同时测量了断裂韧性K_(Ic)=(1.41±0.013)kg·mm~((-3)/2),并对人工狭窄锯口与天然初始裂缝的试件进行了对比测量,认为对于云南大理岩的紧凑拉伸试件可以用人工狭窄锯口代替天然初始裂缝。 相似文献
13.
推导了各向异性介质中由弹性系数表示的方位动校NMO速度的具体表达式,表明各向异性介质中方位NMO速度程椭圆形状,并分别对具水平对称轴的横向各向同性介质(HTI)、正交介质和单斜各向异性介质及在不同的裂隙填充物的性质下方位NMO速度进行了计算,结果表明裂隙的存在对NMO速度的影响不仅与裂隙密度有关,还取决于裂隙填充物的性质.同时,研究表明对于裂隙型单斜各向异性介质,其方位NMO速度椭圆轴向并不象HTI介质和正交介质中的那样与自然坐标系的坐标轴一致,而是发生了一定角度的偏离,其大小与裂隙填充物的性质、两组裂隙密度的比值及裂隙间的夹角等因素有关,研究结果为进一步区分裂隙介质的类型及裂隙填充物的性质提供依据. 相似文献
14.
Fracture toughness measurements under static loading conditions have been carried out in Barre and Lac du Bonnet granites.
An advanced AE technique has been adopted to monitor real-time crack initiation and propagation around the principal crack
in these tests to understand the processes of brittle failure under tension and related characteristics of the resulting fracture
process zone. The anisotropy of Mode I fracture toughness has been investigated along specific directions. Microcrack density
and orientation analysis from thin section studies have shown these characteristics to be the primary cause of the observed
variation in fracture toughness, which is seen to vary between 1.14 MPa.(m)1/2 and 1.89 MPa.(m)1/2 in Barre granite. The latter value represents the case in which the crack is propagated at right angles to the main set of
microcracks. The creation of a significant fracture process zone surrounding the propagating main crack has been confirmed.
Real-time imaging of the fracture process and formation of fracture process zone by AE techniques yielded results in very
good agreement with those obtained by direct optical analysis. 相似文献
15.
We have investigated non‐Darcian flow to a vertical fracture represented as an extended well using a linearization procedure and a finite difference method in this study. Approximate analytical solutions have been obtained with and without the consideration of fracture storage based on the linearization procedure. A numerical solution for such a non‐Darcian flow case has also been obtained with a finite difference method. We have compared the numerical solution with the approximate analytical solutions obtained by the linearization method and the Boltzmann transform. The results indicate that the linearized solution agrees generally well with the numerical solution at late times, and underestimates the dimensionless drawdown at early times, no matter if the fracture storage is considered or not. When the fracture storage is excluded, the Boltzmann transform solution overestimates the dimensionless drawdown during the entire pumping period. The dimensionless drawdowns in the fracture with fracture storage for different values of dimensionless non‐Darcian hydraulic conductivity β approach the same asymptotic value at early times. A larger β value results in a smaller dimensionless drawdown in both the fracture and the aquifer when the fracture storage is included. The dimensionless drawdown is approximately proportional to the square root of the dimensionless time at late times. 相似文献
16.
Robert W.D. Lodge David T. Lescinsky 《Journal of Volcanology and Geothermal Research》2009,185(4):298-310
Cooling lava commonly develop polygonal joints that form equant hexagonal columns. Such fractures are formed by thermal contraction resulting in an isotropic tensional stress regime. However, certain linear cooling fracture patterns observed at some lava–ice contacts do not appear to fit the model for formation of cooling fractures and columns because of their preferred orientations. These fracture types include sheet-like (ladder-like rectangular fracture pattern), intermediate (pseudo-aligned individual column-bounding fractures), and pseudopillow (straight to arcuate fractures with perpendicular secondary fractures caused by water infiltration) fractures that form the edges of multiple columns along a single linear fracture. Despite the relatively common occurrence of these types of fractures at lava–ice contacts, their significance and mode of formation have not been fully explored. This study investigates the stress regimes responsible for producing these unique fractures and their significance for interpreting cooling histories at lava–ice contacts.Data was collected at Kokostick Butte dacite flow at South Sister, OR, and Mazama Ridge andesite flow at Mount Rainier, WA. Both of these lava flows have been interpreted as being emplaced into contact with ice and linear fracture types have been observed on their ice-contacted margins. Two different mechanisms are proposed for the formation of linear fracture networks. One possible mechanism for the formation of linear fracture patterns is marginal bulging. Melting of confining ice walls will create voids into which flowing lava can deform resulting in margin-parallel tension causing margin-perpendicular fractures. If viewed from the ice-wall, these fractures would be steeply dipping, linear fractures. Another possible mechanism for the formation of linear fracture types is gravitational settling. Pure shear during compression and settling can result in a tensional environment with similar consequences as marginal inflation. In addition to this, horizontally propagating cooling fractures will be directly influenced by viscous strain caused by the settling of the flow. This would cause preferential opening of fractures horizontally, resulting in vertically oriented fractures.It is important to note that the proposed model for the formation of linear fractures is dependent on contact with and confinement by glacial ice. The influence of flow or movement on cooling fracture patterns has not been extensively discussed in previous modeling of cooling fractures. Rapid cooling of lava by the interaction with water and ice will increase the ability to the capture and preserve perturbations in the stress regime. 相似文献
17.
J.G. Sclater H. Dick I.O. Norton D. Woodroffe 《Earth and Planetary Science Letters》1978,37(3):393-400
An en echelon suite of four fracture zones, trending approximately N40°E, has been discovered during a survey of the Southwest Indian Ocean Ridge between Bouvet Island and 14°E. The largest of these fracture zones, the Islas Orcadas and Shaka, are less than 30 km wide, have more than 3 km of vertical relief, and are respectively 100 and 200 km in length. The morphology of these and the Bouvet and Prince Edward fracture zones have been used to compute a pole for the relative motion between Africa and Antarctica. This pole, at 4°S and 32°W, is within the range of previously computed pole positions.Ridge basalts were dredged at three separate locations: at the Conrad fracture zone near 55°40′S and 3°51′W, at the Islas Orcadas fracture zone near 54°5′S and 6°4′E, and at the ridge crest near 11°E. In addition, samples from a probable upper mantle intrusion were recovered from one wall of the Islas Orcadas fracture zone. The opposite wall was very different consisting entirely of normal mid-ocean ridge basalt. 相似文献
18.
19.
20.
An experimental study on fractural features of concrete samples containing hard inclusion 总被引:1,自引:0,他引:1
AnexperimentalstudyonfracturalfeaturesofconcretesamplescontaininghardinclusionZHAOYONGXU(许昭永)1)BINWANG(王彬)1)JINMINGZHAO(赵晋... 相似文献