首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献，搜索用时 93 毫秒
1.
The 18–24 January 1913 eruption of Colima Volcano consisted of three eruptive phases that produced a complex sequence of tephra fall, pyroclastic surges and pyroclastic flows, with a total volume of 1.1 km3 (0.31 km3 DRE). Among these events, the pyroclastic flows are most interesting because their generation mechanisms changed with time. They started with gravitanional dome collapse (block-and-ash flow deposits, Merapi-type), changed to dome collapse triggered by a Vulcanian explosion (block-and-ash flow deposits, Soufrière-type), then ended with the partial collapse of a Plinian column (ash-flow deposits rich in pumice or scoria,). The best exposures of these deposits occur in the southern gullies of the volcano where Heim Coefficients (H/L) were obtained for the various types of flows. Average H/L values of these deposits varied from 0.40 for the Merapi-type (similar to the block-and-ash flow deposits produced during the 1991 and 1994 eruptions), 0.26 for the Soufrière-type events, and 0.17–0.26 for the column collapse ash flows. Additionally, the information of 1991, 1994 and 1998–1999 pyroclastic flow events was used to delimit hazard zones. In order to reconstruct the paths, velocities, and extents of the 20th Century pyroclastic flows, a series of computer simulations were conducted using the program FLOW3D with appropriate Heim coefficients and apparent viscosities. The model results provide a basis for estimating the areas and levels of hazard that could be associated with the next probable worst-case scenario eruption of the volcano. Three areas were traced according to the degree of hazard and pyroclastic flow type recurrence through time. Zone 1 has the largest probability to be reached by short runout (<5 km) Merapi and Soufrière pyroclastic flows, that have occurred every 3 years during the last decade. Zone 2 might be affected by Soufriere-type pyroclastic flows (∼9 km long) similar to those produced during phase II of the 1913 eruption. Zone 3 will only be affected by pyroclastic flows (∼15 km long) formed by the collapse of a Plinian eruptive column, like that of the 1913 climactic eruption. Today, an eruption of the same magnitude as that of 1913 would affect about 15,000 inhabitants of small villages, ranches and towns located within 15 km south of the volcano. Such towns include Yerbabuena, and Becerrera in the State of Colima, and Tonila, San Marcos, Cofradia, and Juan Barragán in the State of Jalisco.  相似文献   

2.
Stratigraphic reconstruction of the Upper Pollara eruption has allowed for the inference of eruptive mechanisms and the distillation of a sedimentological model for pyroclastic density currents (PDCs) moving across variable topography. The pre-eruptive topography in the study area was characterised by a tuff ring-like morphology, with both inward and outward dipping slopes. Highly viscous, moderately porphyritic, dacitic to rhyolitic magmas fed the eruption, which was characterised by a Vulcanian eruptive style. The stratigraphic succession was divided into five eruption units (EUs), which result from different phases of the eruption separated by stases. Sustained columns occurred only during EU1, while PDC generation dominates EU2–5. Lithofacies analysis of the PDC deposits indicates the prevalence of massive coarse-grained deposits on the inner slopes of the Pollara crater, which are interpreted as the deposits of a flow-boundary zone dominated by granular flow or fluid escape regimes. Dune-bedded, massive to stratified lithofacies dominate the outer slopes of the Pollara crater, and are interpreted as the deposits of PDCs with flow-boundary zones in which traction played a major role. Thin, massive PDC deposits are exposed on the sub-horizontal Malfa terrace, and are interpreted as representative of flow-boundary zones dominated by a granular flow regime. The occurrence of stacked deposits indicates that most of the PDCs were characterised by unsteady pulsatory behaviour, with development of trains of pulses during their transport. The downcurrent lithofacies transitions observed for the Upper Pollara deposits have finally been compared with other similar lithofacies associations which have been described for short-lived PDCs at tuff rings, in order to discuss the influence of pre-eruptive topography on lithofacies association.  相似文献   

3.
Pyroclastic density currents (PDCs) generated during the Plinian eruption of the Pomici di Avellino (PdA) of Somma–Vesuvius were investigated through field and laboratory studies, which allowed the detailed reconstruction of their eruptive and transportation dynamics and the calculation of key physical parameters of the currents. PDCs were generated during all the three phases that characterised the eruption, with eruptive dynamics driven by both magmatic and phreatomagmatic fragmentation. Flows generated during phases 1 and 2 (EU1 and EU3pf, magmatic fragmentation) have small dispersal areas and affected only part of the volcano slopes. Lithofacies analysis demonstrates that the flow-boundary zones were dominated by granular-flow regimes, which sometimes show transitions to traction regimes. PDCs generated during eruptive phase 3 (EU5, phreatomagmatic fragmentation) were the most voluminous and widespread in the whole of Somma–Vesuvius’ eruptive history, and affected a wide area around the volcano with deposit thicknesses of a few centimetres up to more than 25 km from source. Lithofacies analysis shows that the flow-boundary zones of EU5 PDCs were dominated by granular flows and traction regimes. Deposits of EU5 PDC show strong lithofacies variation northwards, from proximally thick, massive to stratified beds towards dominantly alternating beds of coarse and fine ash in distal reaches. The EU5 lithofacies also show strong lateral variability in proximal areas, passing from the western and northern to the eastern and southern volcano slopes, where the deposits are stacked beds of massive, accretionary lapilli-bearing fine ash. The sedimentological model developed for the PDCs of the PdA eruption explains these strong lithofacies variations in the light of the volcano’s morphology at the time of the eruption. In particular, the EU5 PDCs survived to pass over the break in slope between the volcano sides and the surrounding volcaniclastic apron–alluvial plain, with development of new flows from the previously suspended load. Pulses were developed within individual currents, leading to stepwise deposition on both the volcano slopes and the surrounding volcaniclastic apron and alluvial plain. Physical parameters including velocity, density and concentration profile with height were calculated for a flow of the phreatomagmatic phase of the eruption by applying a sedimentological method, and the values of the dynamic pressure were derived. Some hazard considerations are summarised on the assumption that, although not very probable, similar PDCs could develop during future eruptions of Somma–Vesuvius.  相似文献   

4.
The dynamics and thermodynamics of large ash flows   总被引：6，自引：6，他引：0  
 Ash flow deposits, containing up to 1000 km3 of material, have been produced by some of the largest volcanic eruptions known. Ash flows propagate several tens of kilometres from their source vents, produce extensive blankets of ash and are able to surmount topographic barriers hundreds of metres high. We present and test a new model of the motion of such flows as they propagate over a near horizontal surface from a collapsing fountain above a volcanic vent. The model predicts that for a given eruption rate, either a slow (10–100 m/s) and deep (1000–3000 m) subcritical flow or a fast (100–200 m/s) and shallow (500–1000 m) supercritical flow may develop. Subcritical ash flows propagate with a nearly constant volume flux, whereas supercritical flows entrain air and become progressively more voluminous. The run-out distance of such ash flows is controlled largely by the mass of air mixed into the collapsing fountain, the degree of fragmentation and the associated rate of loss of material into an underlying concentrated depositional system, and the mass eruption rate. However, in supercritical flows, the continued entrainment of air exerts a further important control on the flow evolution. Model predictions show that the run-out distance decreases with the mass of air entrained into the flow. Also, the mass of ash which may ascend from the flow into a buoyant coignimbrite cloud increases as more air is entrained into the flow. As a result, supercritical ash flows typically have shorter runout distances and more ash is elutriated into the associated coignimbrite eruption columns. We also show that one-dimensional, channellized ash flows typically propagate further than their radially spreading counterparts. As a Plinian eruption proceeds, the erupted mass flux often increases, leading to column collapse and the formation of pumiceous ash flows. Near the critical conditions for eruption column collapse, the flows are shed from high fountains which entrain large quantities of air per unit mass. Our model suggests that this will lead to relatively short ash flows with much of the erupted material being elutriated into the coignimbrite column. However, if the mass flux subseqently increases, then less air per unit mass is entrained into the collapsing fountain, and progressively larger flows, which propagate further from the vent, will develop. Our model is consistent with observations of a number of pyroclastic flow deposits, including the 1912 eruption of Katmai and the 1991 eruption of Pinatubo. The model suggests that many extensive flow sheets were emplaced from eruptions with mass fluxes of 109–1010 kg/s over periods of 103–105 s, and that some indicators of flow "mobility" may need to be reinterpreted. Furthermore, in accordance with observations, the model predicts that the coignimbrite eruption columns produced from such ash flows rose between 20 and 40 km. Received: 25 August 1995 / Accepted: 3 April 1996  相似文献   

5.
 The ca. 10,500 years B.P. eruptions at Ruapehu volcano deposited 0.2–0.3 km3 of tephra on the flanks of Ruapehu and the surrounding ring plain and generated the only known pyroclastic flows from this volcano in the late Quaternary. Evidence of the eruptions is recorded in the stratigraphy of the volcanic ring plain and cone, where pyroclastic flow deposits and several lithologically similar tephra deposits are identified. These deposits are grouped into the newly defined Taurewa Formation and two members, Okupata Member (tephra-fall deposits) and Pourahu Member (pyroclastic flow deposits). These eruptions identify a brief (<ca. 2000-year) but explosive period of volcanism at Ruapehu, which we define as the Taurewa Eruptive Episode. This Episode represents the largest event within Ruapehu's ca. 22,500-year eruptive history and also marks its culmination in activity ca. 10,000 years B.P. Following this episode, Ruapehu volcano entered a ca. 8000-year period of relative quiescence. We propose that the episode began with the eruption of small-volume pyroclastic flows triggered by a magma-mingling event. Flows from this event travelled down valleys east and west of Ruapehu onto the upper volcanic ring plain, where their distal remnants are preserved. The genesis of these deposits is inferred from the remanent magnetisation of pumice and lithic clasts. We envisage contemporaneous eruption and emplacement of distal pumice-rich tephras and proximal welded tuff deposits. The potential for generation of pyroclastic flows during plinian eruptions at Ruapehu has not been previously considered in hazard assessments at this volcano. Recognition of these events in the volcanological record is thus an important new factor in future risk assessments and mitigation of volcanic risk at Tongariro Volcanic Centre. Received: 5 July 1998 / Accepted: 12 March 1999  相似文献   

6.
A core drilled within the northern part of the city of Napoli has offered the unique opportunity to observe in one single sequence the superposition of the four pyroclastic flow units emplaced during the Campanian Ignimbrite (CI) eruption. Such a stratigraphic succession has never been encountered before in natural or in man made exposures. Therefore the CI sequence was reconstructed only on the basis of stratigraphic correlations and compositional data (in literature). The occurrence of four superposed CI flows, together with all the data available (in literature) allowed us to better constrain the chemical stratigraphy of the deposit and the compositional structure of the CI magma chamber. The CI magma chamber includes two cogenetic magma layers, separated by a compositional gap. The upper magma layer was contaminated by interaction with radiogenic fluids. The two magma layers were extruded either individually or simultaneously during the course of the eruption. In the latter case they produced a hybrid magma. But no evidence of input of new geochemically and isotopically distinct magma batches just prior or during the eruption has been found. Comparison with the exposed CI deposits has permitted reconstruction of variable eruption phases and related magma withdrawal and caldera collapse episodes. The eruption was likely to have began with phreatomagmatic explosions followed by the formation of a sustained plinian eruption column fed by the simultaneous extraction from both magma layers. Towards the end of this phase the upward migration of the fragmentation surface and the decrease in magma eruption rate and/or activation of fractures formed an unstable pulsating column that was fed only by the most-evolved magma layer. This plinian phase was followed by the collapse of the eruption column and the beginning of caldera formation. At this stage expanded pyroclastic flows fed by the upper magma layer in the chamber generated. During the following major caldera collapse episode, the maximum mass discharge rate was reached and both magma layers were tapped, generating expanded pyroclastic flows. Towards the end of the eruption, only the deeper and less differentiated magma layer was tapped producing more concentrated pyroclastic flows that traveled short distances.  相似文献   

7.
The November 13, 1985 eruption of Nevado del Ruiz produced a series of pyroclastic flows and surges that eroded channels on the surface of the summit glacier and generated lahars which descended down most of the rivers that drain the volcano. The stratigraphy of the proximal pyroclastic deposits indicates that there were at least four episodes to the eruption. Episode I, deposited an unusual surge consisting of small pieces of ice mixed with ash and exhibiting planar stratification. Ballistically emplaced fragments are also intercalated with this unit. During Episode II, at least two pyroclastic flows were erupted. Their deposits contain the most evolved pumice of the entire eruption; SiO2 content of matrix glass ranges between 74.5 and 74.9%. Episode III is marked by the emplacement of a welded tuff with an average SiO2 content of about 66% in the matrix glass. The final Episode IV was characterized by the development of a high-altitude eruption column and the emplacement of several nonwelded pyroclastic flows. Banded pumice are common in the pyroclastic flow as well as in the pumice fall deposits. Co-existing dark and light pumice bands differ in SiO2 content by 3.5% and in general are similar to the composition of the welded pumice from Episode III.The compositional zonation of the pyroclastic deposits from Episode I to IV suggests that a nearsurface compositionally-stratified portion of the magma body was tapped during Episode II. During Episodes III and IV the main body of magma was involved although the coexistence of the compositionally distinct pumice clasts at similar stratigraphic levels argues for mixing of magma from different levels in the chamber during the eruptive process.  相似文献   

8.
Thick, poorly sorted ash deposits produced during the Minoan cruption have differing palacomagnetic histories. Included clasts from deposits produced in the second phase of the eruption have random NRM and cleaned directions and were emplaced as cold mudflows. Clasts from ignimbrite flow units erupted in the third phase have significant directions and their palacomagnetic pole is consistent with today’s geomagnetic pole. These deposits acquired a TRM on deposition and were emplaced as hot pumice flows.  相似文献   

9.
We report the stratigraphic sequence of the 2005 eruption of Ilamatepec volcano together with sedimentological and chemical analyses of its products.Structural and textural characteristics of the deposits indicate that the eruption was driven by a small-volume rhyolitic intrusion at shallow levels, which resulted first in the collapse of the existing hydrothermally altered fan of previous deposits inside the crater lake, driving phreatic explosions with launching of blocks on ballistic trajectories; later the magma interacted with lake waters producing several hydromagmatic pyroclastic density currents (PDCs). These flows were energetic enough to knock down pine trees up to distances of 1.8 km from the crater in the E-NE sector of the volcano. Finally, ejection of ballistic blocks that landed on previously emplaced, wet pyroclastic density current deposits, caused the generation of a lahar that flowed down the steep eastern flank toward the El Jabillal gully. Subsequent lahars occurred as a result of intense rain caused by hurricane Stan.Radiocarbon ages on paleosols and charcoal fragments, separating previous volcanogenic sequences, indicate that similar eruptions have occurred more frequently in the past centuries, than previously thought.The new data confirms that Ilamatepec volcano is one of the most active volcanoes in El Salvador. Nevertheless, more detailed studies of the eruptive sequence of Ilamatepec volcano are mandatory to establish future eruptive patterns.  相似文献   

10.
 Tufi di Grotte dei Rossi Inferiori are thick ash deposits, representing the most voluminous stratigraphic unit on Vulcano Island. The deposits are related to hydromagmatic eruption which occurred under shallow water inside a caldera depression. Grain-size data and results of SEM investigation allow the character of the transporting medium, solid material concentration in the cloud during the lateral expansion, and the nature and role of the fluids present at the time of deposition to be constrained. We suggest that the eruption was characterized by closely timed hydromagmatic pulses giving rise to eruption clouds rich in water vapor and steam. The coarser material was not significantly transported in the eruptive cloud and it probably deposited in the caldera depression area. The finer material was extensively transported in the cloud, creating turbulent flows which surmounted the caldera rim barrier and dispersed in a southward direction, forming widespread deposits in the Piano area. Lower concentrated flows produced laminated deposits of more limited dispersion, whereas higher concentrated flows formed more dispersed thicker massive layers. Received: 26 February 1996 / Accepted: 17 June 1997  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号