共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
3.
The concentrically braced frame (CBF) structure is one of the most efficient steel structural systems to resist earthquakes. This system can dissipate energy during earthquakes through braces, which are expected to yield in tension and buckle in compression, while all other elements such as columns, beams and connections are expected to behave elastically. In this paper, the performance of single‐storey CBFs is assessed with nonlinear time‐history analysis, where a robust numerical model that simulates the behaviour of shake table tests is developed. The numerical model of the brace element used in the analysis was calibrated using data measured in physical tests on brace members subjected to cyclic loading. The model is then validated by comparing predictions from nonlinear time‐history analysis to measured performance of brace members in full scale shake table tests. Furthermore, the sensitivity of the performance of the CBF to different earthquake ground motions is investigated by subjecting the CBF to eight ground motions that have been scaled to have similar displacement response spectra. The comparative assessments presented in this work indicate that these developed numerical models can accurately capture the salient features related to the seismic behaviour of CBFs. A good agreement is found between the performance of the numerical and physical models in terms of maximum displacement, base shear force, energy dissipated and the equivalent viscous damping. The energy dissipated and, more particular, the equivalent viscous damping, are important parameters required when developing an accurate displacement‐based design methodology for CBFs subjected to earthquake loading. In this study, a relatively good prediction of the equivalent viscous damping is obtained from the numerical model when compared with data measured during the shake table tests. However, it was found that already established equations to determine the equivalent viscous damping of CBFs may give closer values to those obtained from the physical tests. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
Observations of pile foundation performance during previous earthquakes have shown that pile failure has been caused by lateral ground movements resulting from soil liquefaction. The recognition that lateral ground movements may play a critical role in pile performance during an earthquake has important implications for design and risk assessment, and requires that analytical models be devised to evaluate these potential problems.In this paper, parametric studies were conducted to estimate the maximum bending moments induced in piles subjected to lateral ground displacement. The results are summarized in charts using dimensionless parameters.The analyses reveal that the existence of a nonliquefiable layer at the ground surface can affect significantly the maximum bending moment of the pile. When a relatively thick nonliquefiable layer exists above a liquefiable layer, neither the material nonlinearity of the soil nor loss of soil stiffness within the liquefiable layer significantly affect the maximum bending moment. When the thickness of the liquefiable soils is greater than about three times that of an overlying intact layer, soil stiffness in the liquefiable layer must be chosen carefully when evaluating the maximum bending moment. 相似文献
5.
Alexandros I. Valsamis George D. Bouckovalas Achilleas G. Papadimitriou 《Soil Dynamics and Earthquake Engineering》2010
This paper investigates the main parameters affecting the anticipated maximum surface displacements due to earthquake-induced lateral spreading of mildly sloping ground. The main tool used for this purpose is a numerical methodology employing a bounding surface plasticity model implemented in a finite difference code, which has been thoroughly validated against 16 published centrifuge lateral spreading experiments. This study shows that important problem parameters are the mean ground (surface) acceleration, the duration of strong shaking following the onset of liquefaction, the corrected SPT blowcount, the depth to the sliding plane, the inclination of the ground surface and the fines content of the liquefied soil layers. A new approximate multi-variable relation is proposed for the estimation of ground surface displacements due to lateral spreading in gently sloping ground, which includes the foregoing parameters. The form of the relation builds upon sliding block theory, but its final formulation is based on statistical analysis of the input data and the results from 120 parametric analyses performed with the validated numerical methodology. Comparison of the predictions of the proposed relation for ground surface displacement against pertinent field data (from 256 case histories) and centrifuge test measurements shows satisfactory accuracy. Furthermore, the variation of lateral displacements with depth is explored and distinct displacement patterns are proposed for uniform, 2-layer and 4-layer ground profiles. 相似文献
6.
A roller seismic isolation bearing is proposed for use in highway bridges. The bearing utilizes a rolling mechanism to achieve seismic isolation and has a zero post‐elastic stiffness under horizontal ground motions, a self‐centering capability, and unique friction devices for supplemental energy dissipation. The objectives of this research are to investigate the seismic behavior of the proposed bearing using parametric studies (1) with nonlinear response history analysis and (2) with equivalent linear analysis according to the AASHTO guide specifications, and by comparing the results from both analysis methods (3) to evaluate the accuracy of the AASHTO equivalent linear method for predicting the peak displacement of the proposed bearing during an earthquake. Twenty‐eight ground motions are used in the studies. The parameters examined are the sloping angle of the intermediate plate of the bearing, the amount of friction force for supplemental energy dissipation, and the peak ground acceleration levels of the ground motions. The peak displacement and base shear of the bearing are calculated. Results of the studies show that a larger sloping angle does not reduce the peak displacement for most of the parametric combinations without friction devices. However, for parametric combinations with friction devices, it allows for the use of a higher friction force, which effectively reduces the peak displacement, while keeping a self‐centering capability. The AASHTO equivalent linear method may underestimate the peak displacement by as much as 40%. Vertical ground motions have little effect on the peak displacement, but significantly increase the peak base shear. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
7.
双向地震动作用的拟等延性系数谱 总被引：1，自引：0，他引：1
首先建立了以强度折减系数表述的恢复力特性满足二维屈服面模型的理想弹塑性单质点系统(它在2个相互垂直的主轴方向上分别具有水平平动自由度)在双向地震动作用下的归一化运动方程。然后引入单向地震动作用下等延性系数的强度折减系数谱,给出了双向地震动作用的拟等延性系数谱(定义为系统分别承受双向和单向地震动作用,在同一主轴方向上的最大位移反应之比)最后通过硬土场地10组双向地震动记录拟等延性系数谱的统计平均结果,分析了结构周期、位移延性系数和阻尼等因素对谱值及结构双向地震反应的影响。结果表明,双向地震动作用与单向地震动作用相比主要增加结构较长周期方向的最大位移反应。若在基于位移的抗震设计中降低结构较短周期方向的设计位移延性系数,可在一定程度上降低双向地震动的不利影响。因定义的谱为比值形式,阻尼对其影响不大。 相似文献
8.
Lateral spread of frozen ground crust over liquefied soil has caused extensive bridge foundation damage in the past winter earthquakes. A shake table experiment was conducted to investigate the performance of a model pile in this scenario and revealed unique pile failure mechanisms. The modelling results provided valuable data for validating numerical models. This paper presents analyses and results of this experiment using two numerical modeling approaches: solid-fluid coupled finite element (FE) modeling and the beam-on-nonlinear-Winkler-foundation (BNWF) method. A FE model was constructed based on the experiment configuration and subjected to earthquake loading. Soil and pile response results were presented and compared with experimental results to validate this model. The BNWF method was used to predict the pile response and failure mechanism. A p-y curve was presented for modelling the frozen ground crust with the free-field displacement from the experiment as loading. Pile responses were presented and compared with those of the experiment and FE model. It was concluded that the coupled FE model was effective in predicting formation of three plastic hinges at ground surface, ground crust-liquefiable soil interface and within the medium dense sand layer, while the BNWF method was only able to predict the latter two. 相似文献
9.
10.
Millen Maxim Viana da Fonseca Antonio Quintero Julieth Ferreira Cristiana Oztoprak Sadik Oser Cihan Bozbey Ilknur Aysal Namik Kosič Mirko Logar Janko 《Bulletin of Earthquake Engineering》2021,19(10):3987-4012
The seismic behaviour of a building on a liquefiable deposit is a complex interaction which involves quantifying both shaking induced damage and permanent ground deformation-related damage. In this paper the key parameters that influence both surface shaking and foundation settlements have been identified as the depth, thickness and liquefaction resistance of an equivalent liquefiable layer. These parameters can be used to develop an ‘equivalent soil profile’ that is analogous to the equivalent single degree-of-freedom that reduces the complexity of the dynamic response of a building into comparable and easily understood quantities. The equivalent soil profile is quantified independent of the seismic hazard, making it compatible with performance based design and assessment frameworks such that the building and soil profile can be directly assessed at different levels of seismic hazard. Several numerical studies are presented that demonstrate the influence of these key parameters on the ground surface shaking and foundation settlement. A set of criteria are proposed for classifying soil profiles into 22 different soil classes for regional loss assessment. An algorithm was developed for automatically fitting the equivalent soil profile to a cone penetration test trace and issues with the fitting are discussed. Field reconnaissance was undertaken to collect additional data to support existing datasets on the performance of buildings in Adapazari, during the 1999 Kocaeli, Turkey, earthquake (Mw = 7.4). The field case history data was used to investigate the correlation between the depth, thickness and liquefaction resistance of an equivalent liquefiable layer, on the extent of foundation permanent deformation. The case history data showed that in general a shallow, thick and weak liquefiable layer near the surface results in significant settlement but a lack of data for buildings on non-liquefiable deposits and the additional complexities involved with real buildings and soil deposits, meant that the trends observed in the idealised numerical models could not identified in the field case history data set.
相似文献11.
为研究不同加固方式对钢筋混凝土(RC)圆截面桥墩抗震性能的影响,利用OpenSees有限元软件建立了普通RC桥墩以及分别采用钢套管、碳纤维增强聚合物(CFRP)、体外预应力筋进行加固的桥墩数值分析模型,对模型输入远断层地震动,进行增量动力分析。以墩顶峰值位移角与震后残余位移角为指标,对比分析了桥墩加固前后的地震响应。结果表明:采用钢套管、体外预应力筋和CFRP加固后,RC桥墩的峰值位移与震后残余位移均减小,钢套管加固方式对桥墩峰值位移的降低幅度最大,体外预应力筋加固方式对抑制桥墩震后残余位移的效果最好;随着剪跨比的增大,3种加固方式对桥墩在地震动作用下位移响应的抑制作用均逐步减小;随着轴压比的增大,3种加固方式对RC桥墩峰值位移的抑制作用逐步降低。 相似文献
12.
Using controlled liquefaction, a seismic isolation technique is introduced by which a large area with dozens of structures can be seismically isolated. The proposed Large Scale Seismic Isolation (LSSI) is in many ways similar to conventional base isolations. The required bearing is provided by a fully undrained pre-saturated liquefiable layer which has substantial vertical stiffness/capacity and minimal lateral stiffness. Moreover, required energy dissipation would be provided through material damping and Biot flow-induced damping within the liquefied layer. LSSI consists of a thick nonliquefiable crust layer and an underlying engineered pre-saturated liquefiable layer bounded by two impermeable thin clay layers. The liquefiable layer should be designed to trigger liquefaction as soon as possible within the early seconds of a design level seismic event. Adopting the energy-based GMP liquefaction theory, optimum gradation of the liquefiable layer is also investigated. It turned out that LSSI would effectively reduce acceleration response spectrum within short to medium periods. Contribution of the proposed LSSI is more pronounced in the case of stronger ground motions such as near field events as well as ground motions with longer return periods. 相似文献
13.
This paper presents a comprehensive study on the rigid block sliding displacement of slopes subjected to ground motions with large velocity pulses. A comparison of the performance of various existing empirical displacement models is provided through analyses of the displacement residuals of slopes subject to pulse-like motions. Except for the PGA- and PGV-based Saygili and Rathje model (2008, referred to as SR08), positive medians of residuals are observed for selected models, indicating an under-estimation. There is a negative constant shift in the total residuals for the SR08 model, which can be easily fixed by changing the constant term in the predictive equation. The residuals from the SR08 model also have the smallest standard deviation compared to the other models. A modified SR08 model is developed for predicting rigid block sliding displacements for pulse-like motions. The modified predictive model is used in probabilistic seismic displacement analyses of slopes in a hypothetical near-fault region. 相似文献
14.
Shear keys are used in the bridge abutments and piers to provide transverse restraints for bridge superstructures. Owing to the relatively small dimensions compared to the main bridge components (girders, piers, abutments, piles), shear keys are normally regarded as secondary component of a bridge structure, and their influences on bridge seismic responses are normally neglected. In reality, shear keys are designed to restrain the lateral displacements of bridge girders, which will affect the transverse response of the bridge deck, thus influence the overall structural responses. To study the influences of shear keys on bridge responses to seismic ground excitations, this paper performs numerical simulations of the seismic responses of a two-span simply-supported bridge model without or with shear keys in the abutments and the central pier. A detailed 3D finite element (FE) model is developed by using the explicit FE code LS-DYNA. The bridge components including bridge girders, piers, abutments, bearings, shear keys and reinforcement bars are included in the model. The non-linear material behaviour including the strain rate effects of concrete and steel rebar are considered. The seismic responses of bridge structures without and with shear keys subjected to bi-axial spatially varying horizontal ground motions are calculated and compared. The failure mode and damage mechanism of shear keys are discussed in detail. Numerical results show that shear keys restrain transverse movements of bridge decks, which influence the torsional–lateral responses of the decks under bi-axial spatially varying ground excitations; neglecting shear keys in bridge response analysis may lead to inaccurate predictions of seismic responses of bridge structures. 相似文献
15.
In this paper,the seismic effectiveness of a density-variable tuned liquid damper(DVTLD) with a sloping bottom is experimentally investigated through a series of shake table tests on a 1/4-scale,3-story frame structure and numerically simulated by a new semi-analytical model.Special attention was given to reducing the fi rst peak and maximum response under near-and far-fi eld ground motions,and the robustness of a density-variable control system consisting of multiple DVTLDs with closely-spaced frequencies.... 相似文献
16.
Zhijian Qiu Ahmed Ebeido Abdullah Almutairi Jinchi Lu Ahmed Elgamal P. Benson Shing Geoffrey Martin 《地震工程与结构动力学》2020,49(4):375-393
Considerable bridge-ground interaction effects are involved in evaluating the consequences of liquefaction-induced deformations. Due to seismic excitation, liquefied soil layers may result in substantial accumulated permanent deformation of sloping ground near the abutments. Ultimately, global response is dictated by the bridge-ground interaction as an integral system. However, a holistic assessment of such response generally requires a highly demanding full three-dimensional (3D) model of the bridge and surrounding ground. As such, in order to capture a number of the salient involved mechanisms, this study focuses on the longitudinal seismic performance of a simpler idealized configuration, motivated by details of an existing bridge-ground configuration. In this model, a realistic multilayer soil profile is considered with interbedded liquefiable/nonliquefiable strata. The effect of the resulting liquefaction-induced ground deformation is explored. Attention is given to overall deformation of the bridge structure due to lateral spreading in the vicinity of the abutments. The derived insights indicate a need for such global analysis techniques, when addressing the potential hazard of liquefaction and its consequences. 相似文献
17.
As the forward directivity and fling effect characteristics of the near-fault ground motions, seismic response of structures in the near field of a rupturing fault can be significantly different from those observed in the far field. The unique characteristics of the near-fault ground motions can cause considerable damage during an earthquake. This paper presents results of a study aimed at evaluating the near-fault and far-fault ground motion effects on nonlinear dynamic response and seismic damage of concrete gravity dams including dam-reservoir-foundation interaction. For this purpose, 10 as-recorded earthquake records which display ground motions with an apparent velocity pulse are selected to represent the near-fault ground motion characteristics. The earthquake ground motions recorded at the same site from other events that the epicenter far away from the site are employed as the far-fault ground motions. The Koyna gravity dam, which is selected as a numerical application, is subjected to a set of as-recorded near-fault and far-fault strong ground motion records. The Concrete Damaged Plasticity (CDP) model including the strain hardening or softening behavior is employed in nonlinear analysis. Nonlinear dynamic response and seismic damage analyses of the selected concrete dam subjected to both near-fault and far-fault ground motions are performed. Both local and global damage indices are established as the response parameters. The results obtained from the analyses of the dam subjected to each fault effect are compared with each other. It is seen from the analysis results that the near-fault ground motions, which have significant influence on the dynamic response of dam–reservoir–foundation systems, have the potential to cause more severe damage to the dam body than far-fault ground motions. 相似文献
18.
Observation has been conducted on soft surface ground with a sloping basement to clarify the effects of lateral inhomogeneity on ground motions and strains induced by seismic waves and to examine the frequency characteristics of the ground surface motions. The scattered Rayleigh wave from the vicinity of the sloping basement has been detected on seismograms and is observed to have a large influence on the ground motions and strains. In this paper the response of the ground is simulated using a hybrid method which combines a particle model and finite element method (FEM). The computed seismograms are in good agreement with observed ones. It is found from the calculations that large ground strains are produced by the scattered Rayleigh waves as well as by the incident shear waves in the surface ground overlying the sloping basement. In addition, the effects of lateral inhomogeneity on an embedded pipeline are examined. The present results are considered to be significant from the viewpoint of earthquake engineering. 相似文献
19.
波形钢腹板混凝土箱拱地震响应分析 总被引：1，自引：0，他引：1
采用时程分析法,对三向地震动作用下的波形钢腹板混凝土箱拱新型结构的地震特性进行分析,通过与混凝土腹板的混凝土箱拱动力特性和地震响应特点的对比,得出该新型拱圈结构具有较优越的抗震性能。同时,把三向地震作用的结果与在两个主方向(纵桥向和横桥向)同时施加地震动的计算结果进行比较,得到竖向地震动对波形板箱拱地震响应的影响程度。 相似文献
20.
During dynamic centrifuge modelling for earthquakes there is a decision to be made about the type of base input motion that should be imparted to the soil model. Motions can either be a tone burst of single frequency or a multi-frequency event simulating a real earthquake. In this paper a series of numerical analyses is reported which endeavours to capture the effects of loading rate on liquefiable soil. Non-linear dynamic finite element analysis in terms of effective stress was carried out using the FE code SWANDYNE. The numerical model was subjected to four types of input motion. Results are presented in terms of excess pore pressure ratios for different frequencies. It was seen that the interplay between frequency content of the seismic motion and generation of excess pore pressure could change the dynamic response of a system. It was concluded that simplicity of the input motion leads to a soil response that is less difficult to analyse. 相似文献