共查询到17条相似文献，搜索用时 109 毫秒
1.
子结构地震模拟振动台混合试验原理与实现 总被引：2，自引：0，他引：2
为了解决地震模拟振动台承载能力及台面尺寸对大型结构试验的限制,扩展振动台的功能,本文提出了子结构地震模拟振动台混合试验方法、试验过程及实时数值积分方法,并给出了试验子结构边界条件的两种模拟形式.通过一个简单框架结构的地震模拟振动台试验和子结构混合加载试验验证了该方法的可行性,并指出了该试验方法的主要技术问题.混合试验方法通过子结构技术和振动台试验相结合,解决了目前的地震模拟振动台试验和拟动力试验在设备规模和加载速度上的局限性. 相似文献
2.
3.
4.
振动台实时耦联动力试验系统构建解决方案 总被引：2，自引：1，他引：1
实时耦联动力试验(RTDHT)是一种将物理模型试验和数值求解计算实时耦联在一起进行整体结构动力反应分析的新型结构动力试验方法。构建实时耦联动力试验系统将面临数值子结构实时计算、数据实时传输、加载器精确加载等问题。本文首先以清华大学新近建成的一套基于振动台的实时耦联动力试验系统为例,对试验系统构建中面临的问题以及相应的解决方案进行了阐述,对构建实时耦联动力试验系统提出了一些指导性的建议。随后简要介绍了利用该系统已经进行的一些实时耦联动力试验,并对实时耦联动力试验可能的应用前景进行了探讨。 相似文献
5.
基于虚拟振动台的实时耦联动力仿真试验 总被引：1，自引：1，他引：0
实时耦联动力试验(RTDHT)是一种将物理模型试验与数值求解计算实时耦联在一起的新型结构动力试验方法.本文采用SIMULINK对液压伺服振动台系统进行了仿真,建立虚拟振动台模型对真实振动台进行离线调试.并提出基于虚拟振动台进行实时耦联动力仿真试验,从而对真实实时耦联动力试验进行指导的思想.仿真结果表明,虚拟振动台可以很好地仿真真实振动台的动力特性,离线调试结果应用于真实振动台能够得到优良的控制性能;基于虚拟振动台的实时耦联动力仿真试验能够反映真实实时耦联动力试验中存在的时滞以及由此而可能导致的系统失稳问题.采用预测补偿算法对时滞进行了补偿,结果表明补偿算法消除了时滞的影响,试验系统稳定且试验结果与数值计算结果吻合得较好.基于虚拟振动台对实时耦联动力试验进行研究,既能对真实试验提出指导又可避免试验系统失稳对设备的损害,是一种实用且必要的研究手段. 相似文献
6.
作为一种集计算机模拟和物理试验于一体的新型混合试验方法,实时子结构试验在过去20年得到迅速发展.该试验方法的关键在于如何保证数值子结构和试验子结构的实时耦联.对于复杂结构来说,更需要高效的数值积分方法以确保每步计算在一个采样步长内完成.鉴于此,本文在Rosenbrock实时积分方法的基础上,提出了一种具有完全并行计算格式的耦合积分方法,并基于单自由度分离质量模型分析了该方法的收敛性;再通过对三自由度分离质量模型的数值模拟,验证了该方法的收敛性;最后,在多自由度试验平台上完成了两自由度结构的实时子结构试验.理论分析、数值模拟及实时子结构试验表明,该方法具有良好的稳定性和2阶精度,与直接积分方法相比更适用于复杂结构的实时子结构试验. 相似文献
7.
本文采用振动台子结构试验数值仿真验证了圆柱形调谐液体阻尼器(CTLD)控制建筑结构地震响应的性能。振动台子结构试验将结构模型作为数值子结构在计算机中计算,将CTLD作为试验子结构进行物理试验。在CTLD和振动台之间安装剪切力检测装置,将测得的剪切力和地震波输入到数值子结构中,采用实时子结构中心差分法进行数值子结构运动方程的求解,计算得到了结构顶层的绝对加速度。再将加速度由振动台实时加载到试验子结构上,实现了结构和CTLD的相互作用。对一个单自由度结构有CTLD控制和无CTLD控制时的加速度响应进行了精确数值求解,结果验证了CTLD能够有效地控制结构在地震作用下的加速度响应。用振动台子结构试验对CTLD与结构耦合系统进行仿真,得到的加速度响应与精确数值求解的结果吻合较好,验证了这种方法能够准确地评估CTLD的减振性能。 相似文献
8.
结构抗震试验方法的发展 总被引：7，自引：3，他引：7
地震荷载极大的破坏性,使得结构抗震性能的研究成为一个被广泛关注的热点问题.为了提高结构抗震研究的试验能力和试验水平,近年来在传统结构抗震试验方法的基础上,出现了一些新的试验方式和方法.本文总结介绍了目前结构抗震试验方法的一些发展趋势,包括：（1）地震模拟振动台的大型化和多台化,以进行大比例模型甚至足尺模型试验或考虑大跨度结构地震动的非均匀性;（2）进行子结构试验的实时化,以实现数值子结构模型和试验子结构模型的实时结合;（3）进行试验设备的网络化,以提高试验设备的利用率,实现资源共享等,供有关研究者参考. 相似文献
9.
根据工业结构－设备体系动力相互作用特点，本文提出了利用主，子结构边界耦合矩阵变换的一般建模方法。通过本文作者完成的六种不同类型的结构－设备复合模型体系在我维地震动作用下振动台试验，总结了工业结构－设备动力相互作用的一般规律和特点。 相似文献
10.
实时子结构实验Chang算法的稳定性和精度 总被引：7，自引：0，他引：7
与慢速拟动力子结构实验相比,实时子结构实验的优点在于它能真实地反映速度相关型试件的特性。实时子结构实验的逐步积分算法通常借用拟动力算法,但是目前液压伺服作动器很难实现速度反馈控制,因而试件速度不能实现原算法的假定值,这样一来算法的稳定性和计算精度将发生改变。台湾学者S.Y.Chang提出一种无条件稳定的显式拟动力算法,本文分析了这种方法应用于实时子结构实验时的稳定性和计算精度。研究发现在实时子结构实验中该方法由无条件稳定变成了有条件稳定的,精度也发生了改变。 相似文献
11.
高阶单步实时动力子结构试验技术研究 总被引：10，自引：1，他引：9
结构联机试验可分为两类：拟静力及拟动力试验技术,它们都需要建立一套显式的逐步积分算法。国内外学者在这方面已经进行了许多的研究,取得了很好的成果。随着振动控制技术在结构工程上的应用,一些速度相关型的装置开始用于被控系统,它给原有的实时子结构试验带来了新问题。如何建立更好的高精度、无条件稳定的实时动力子结构试验算法日趋重要。本文在前人早期高阶单步逐步积分算法研究成果的基础上,提出了一种新的高阶单步实时动力子结构试验算法。数值模拟分析表明,新算法不仅是显式的,而且具有高精度、无算法阻尼、无超越现象等算法特点,均比目前所见到的已有算法优越。如果能实现实时子结构试验,就能同时控制位移和速度,则应用本文算法必将取得更好的试验结果。 相似文献
12.
《Soil Dynamics and Earthquake Engineering》2012,32(12):1690-1702
Simulating dynamic soil–structure interaction (SSI) problems is a challenge when using a shaking table because of the semi-infinity of soil foundations. This paper develops real-time dynamic hybrid testing (RTDHT) for SSI problems in order to consider the radiation damping effect of the semi-infinite soil foundation using a shaking table. Based on the substructure concept, the superstructure is physically tested and the semi-infinite foundation is numerically simulated. Thus, the response of the entire system considering the dynamic SSI is obtained by coupling the numerical calculation of the soil and the physical test of the superstructure. A two-story shear frame on a rigid foundation was first tested to verify the developed RTDHT system, in which the top story was modeled as the physical substructure and the bottom story was the numerical substructure. The RTDHT for a two-story structure mounted on soil foundation was then carried out on a shaking table while the foundation was numerically simulated using a lumped parameter model. The dynamic responses, including acceleration and shear force, were obtained under soft and hard soil conditions. The results show that the soil–structure interaction should be reasonably taken into account in the shaking table testing for structures. 相似文献
13.
Qiang Wang Jin-Ting Wang Feng Jin Fu-Dong Chi Chu-Han Zhang 《Soil Dynamics and Earthquake Engineering》2011
Simulating dynamic soil–structure interaction (SSI) problems is a challenge when using a shaking table because of the semi-infinity of soil foundations. This paper develops real-time dynamic hybrid testing (RTDHT) for SSI problems in order to consider the radiation damping effect of the semi-infinite soil foundation using a shaking table. Based on the substructure concept, the superstructure is physically tested and the semi-infinite foundation is numerically simulated. Thus, the response of the entire system considering the dynamic SSI is obtained by coupling the numerical calculation of the soil and the physical test of the superstructure. A two-story shear frame on a rigid foundation was first tested to verify the developed RTDHT system, in which the top story was modeled as the physical substructure and the bottom story was the numerical substructure. The RTDHT for a two-story structure mounted on soil foundation was then carried out on a shaking table while the foundation was numerically simulated using a lumped parameter model. The dynamic responses, including acceleration and shear force, were obtained under soft and hard soil conditions. The results show that the soil–structure interaction should be reasonably taken into account in the shaking table testing for structures. 相似文献
14.
An inelastic substructure technique for the pseudodynamic test method is described. This technique requires testing of only a critical component of a multi-degree-of-freedom structure, while the remaining portion is modelled using standard inelastic analytical procedures. This is an economical method to investigate the seismic behaviour of a structure, provided a critical subassembly is found. This paper describes the development of a substructure algorithm which is verified with a numerically simulated test. The method was used to evaluate the seismic performance of moment-resisting steel frames. Modelling for an eight-storey, three-bay frame is discussed, and the boundary conditions between the analytical portion and the experimental component are evaluated. The results indicate that the selection of the critical subassembly was adequate and that the pseudodynamic response was significantly dependent on the behaviour of this experimental component. Furthermore, experimental results suggest that this information would have been difficult to obtain from quasi-static testing or from standard inelastic dynamic analysis. Therefore, this substructure pseudodynamic technique was an economical tool to investigate the seismic behaviour of ductile frames. 相似文献
15.
16.
This paper studies the stability of the central difference method (CDM) for real‐time substructure test considering specimen mass. Because the standard CDM is implicit in terms of acceleration, to avoid iteration, an explicit acceleration formulation is assumed for its implementation in real‐time dynamic substructure testing. The analytical work shows that the stability of the algorithm decreases with increasing specimen mass if the experimental substructure is a pure inertia specimen. The algorithm becomes unstable however small the time integration interval is, when the mass of specimen equal or greater than that of its numerical counterpart. For the case of dynamic specimen, the algorithm is unstable when there is no damping in the whole test structure; a damping will make the algorithm stable conditionally. Part of the analytical results is validated through an actual test. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
17.
Real‐time testing with dynamic substructuring is a novel experimental technique capable of assessing the behaviour of structures subjected to dynamic loadings including earthquakes. The technique involves recreating the dynamics of the entire structure by combining an experimental test piece consisting of part of the structure with a numerical model simulating the remainder of the structure. These substructures interact in real time to emulate the behaviour of the entire structure. Time integration is the most versatile method for analysing the general case of linear and non‐linear semi‐discretized equations of motion. In this paper we propose for substructure testing, L‐stable real‐time (LSRT) compatible integrators with two and three stages derived from the Rosenbrock methods. These algorithms are unconditionally stable for uncoupled problems and entail a moderate computational cost for real‐time performance. They can also effectively deal with stiff problems, i.e. complex emulated structures for which solutions can change on a time scale that is very short compared with the interval of time integration, but where the solution of interest changes on a much longer time scale. Stability conditions of the coupled substructures are analysed by means of the zero‐stability approach, and the accuracy of the novel algorithms in the coupled case is assessed in both the unforced and forced conditions. LSRT algorithms are shown to be more competitive than popular Runge–Kutta methods in terms of stability, accuracy and ease of implementation. Numerical simulations and real‐time substructure tests are used to demonstrate the favourable properties of the proposed algorithms. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献