首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 93 毫秒
1.
The Dabie Mountain is the collisional orogenic belt between the North China Block and the Yangtze Block. As the eastern segment of the central-China orogenic belt, its tectonic framework is corresponding to the Qinling orogenic belt as a whole[1]. The NHB in northern part of Dabie Orogen is regarded as the joint belt between the Yangtze Block and the North China Block, and roughly corresponds to the north Qinling belt of the Qinling orogenic belt, which separated the Tongbai-Dabie hig…  相似文献   

2.
The Tanlu( Tancheng-Lujiang) fault is one of the major structures in eastern China,which cuts across different blocks and controls the tectonic activity. Using the seismic data from the China Earthquake Networks Center,we investigate the spatial variations of the b-value in the Dabie-Sulu( Jiangsu-Shandong) organic belt by calculating the b-value of each grid( 1°×1°) from 1970 to 2010. The study shows that: the b-value is smaller in the Tanlu fault and its adjacent area,which might suggest that the major earthquake recurrence period is relatively long due to the lower frequency of small earthquake activity. In both sides of Tanlu fault,the b-value is higher at the edge of Sulu block and the eastern part of Dabie orogenic belt. The b values are higher in North China central orogenic belt,and small earthquake activity which occurred along the central orogenic belt is frequent. Additionally,combined with geological and geophysical study,we find that the b-value has a certain correspondence relationship with the lithologic distribution,which informs us that seismic activity features are closely related to the inhomogeneous media in the crust.  相似文献   

3.
A major slip and thrust belt within the eastern Jiaodong Peninsula is located at the eastern terminal of the Qinling-Dabie-Sulu orogenic belt between the Sino-Korea Block and Yangtze Block. Although a lot of isotope chronologic data have been obtained regionally, little structural chronological research has been conducted in this region and this paper corrects that. Syn-deformational minerals were system-atically selected from samples of the NE-ENE trending transpressional shear zones and transpres-sional nappes and carefully analysed using 40Ar/39Ar methods. Two tectonic events were defined with the first event resulting from early movement of transpressional nappes around 190 Ma ago. This ac-cords with the period of syn-orogenic sinistral slip of the Tan-Lu faults and clockwise shear in the Eastern Qinling-Tongbaishan part of the Qinling-Dabie-Sulu orogenic belt. The second event involved strikeslip thrust movement of deep shear zones between 130Ma and 120Ma. This resulted from the onset of Mesozoic tectonic conversion in the eastern Jiaodong Peninsula. The sinistral strikeslip-thrusting in Jiaodong Peninsula and the extensional tectonism (toward ESE) in Liaodong Peninsula probably resulted in the clockwise rotation of Korea Peninsula in late Mesozoic.  相似文献   

4.
A great deal of practical data in recent years have proved that the East Kunlun orogenic belt and even the China central orogenic belt are complex orogenic belts that underwent polycycle orogenic evolvement[1―7]. Each orogenic cycle has left a compositional print, the multi-period ophiolites[4―6] and various types of tec-tono-magmatic production in the same orogenic belt. There is a suite of shallow metamorphic volcanic rocks in the Nuomuhong area in the east part of the East Kunlun orogen…  相似文献   

5.
Introduction The Tianshan orogenic belt between the Tarim and Junggar basins has re-uplifted in Cenozoic due to the collision and the northwards push-compression of Asia-India plate. The special active tectonic zones have been formed along both south and north margins of the Tianshan mountains (FENG, et al, 1991). The Tianshan seismic belt is one of the major seismic belts in China. A se-ries of strong earthquakes occurred in two flanks of the Tianshan mountains in 20th century, such as …  相似文献   

6.
The topographic evolution of continental orogens is important for understanding continental orogenic processes,geodynamic mechanisms,and climatic and environmental changes.The Qinling Orogen is a major orogenic belt in China,and its uplift history can provide insights into the tectonic configuration and geodynamics of China and East Asia.Previous studies have shown that the Dabashan and Micangshan-Hannan Dome(MHD)in the South Qinling orogenic belt were uplifted during the Mesozoic.However,the magnitude of the uplift remains unclear.In this study,using sedimentary records in the northern Sichuan Basin and lithospheric flexural modeling,we estimated the magnitude of Mesozoic uplift of the Dabashan and MHD,along with the effective elastic thickness(Te)of the Sichuan Basin.The Dabashan and MHD were uplifted by approximately 1220 and 880 m during the Middle Jurassic and Early Cretaceous,respectively.Therefore,we propose that the present-day elevation of the Dabashan and MHD is primarily the result of Mesozoic uplift.The differences in the duration and amount of uplift between different tectonic units indicate that the uplift processes and driving mechanisms in the South Qinling orogenic belt were different in the Mesozoic and Cenozoic.Mesozoic uplift was the result of convergence of the North China and South China blocks advanced from east to west,whereas Cenozoic uplift was driven by ongoing indentation of the Indian Plate into Eurasia from southwest to northeast.The lithospheric strength of the northern Sichuan Basin was weakened from the Middle Jurassic to Early Cretaceous,and Tedecreased from 73 to 57 km.This may have been caused by the flexure-related bending stresses in the lithosphere that developed due to the large topographic loading.  相似文献   

7.
The Mianle tectonic zone, defined as a series of fault zones consisting mainly of south-verging thrusts and nappes, represents the south boundary of the Qinling-Dabie orogenic belt. The north side of the eastern end of the Mianle tectonic zone adjoins the exposure of the Dabieshan UHP rocks. Further to east, the zone was offset by the Tanlu faults and moved to eastern Shandong Province. While to its west, across the Qinghai-Tibetan Plateau, the zone was dislocated by the Altun fault, and…  相似文献   

8.
IntroductionTethys-Himalya tectonic belt extends from west to east across Europe, Asia and Africa, and stops at the longitude of 104(E in China. The famous North-south active tectonic belt located in China is a part of China-Mongolia central-axis strong earthquake belt and the huge crustal thickness undulation belt. The tectonic belt is a strong extrusion, tension and shear region. It is synthesized by topography gradient belt, faults, Cenozoic basin and strong earthquake belt on north-so…  相似文献   

9.
The Anjiayingzi gold deposit in Chifeng County, Inner Mongolia is located in the central part of the gold mineralization belt of the northern margin of the North China Craton (NCC), and is adjacent to the Paleozoic Inner Mongolia-Da Hinggan Mountains orogenic belt in the north. The Chifeng-Kaiyuan fault, which separates the NCC from this orogenic belt, is considered to be a regional ore-controlling structure. The Anjiayingzi gold deposit is a mediate-size quartz lode-gold deposit and is hosted by the Anjiayingzi quartz monzonite that was emplaced into the basement composed of early Precambrian gneisses. Rhyolitic and porphyritic dikes are generally associated with the gold mineralization. Zircon U-Pb analyses suggest that the Anjiayingzi granite was emplaced from 132 Ma to 138 Ma, while the rhyolitic dikes that occupy the same fracture system as the gold-bearing quartz veins and locally crosscut the gold lodes crystallized from 125 Ma to 127 Ma. These results constrain the mineralization age between 126  相似文献   

10.
Based on deep geophysical detections, we have reconstructed the crustal structure from the eastern margin of the Tibetan Plateau to the Jiangnan-Xuefeng orogenic belt. The results suggest that the Yangtze Block was overthrusted by crustal materials in its NW direction from the eastern Tibetan Plateau but in its SE direction from the Jiangnan orogen. These overthrusting effects control the crustal structure from the western Sichuan to the western area of the Jiangnan orogen-Xuefeng orogenic belt. The eastward extruded materials from the eastern Tibetan Plateau were blocked by the rigid basement in the Sichuan Basin, where upper-middle crust was overthrusted whereas the lower crust was underthrusted beneath the Sichuan Basin. The underthrusted unit was absorbed by crustal folding, shortening and thickening in the Yangtze Block, forming the Xiongpo and Longquan Mountains tectonic belts and resulting in the NW-directed thrusting of the Pujiang-Chengdu-Deyang fault, and the western hillsiden fault in the Longquan Mountain. These results provide resolution to the controversy where the eastward extrusion material from the Qinghai-Tibet Plateau had gone. Overall, that Yangtze Block was subjected to thrusting of the crustal materials from the orogenic belts over its both sides. This finding has implications for the study of the intracontinental orogenic mechanism in South China, the reconstruction of tectonic evolutionary history and the kinematics processes during the lateral extrusion of the Tibet Plateau.  相似文献   

11.
秦岭造山带与其南北两侧华北克拉通和扬子克拉通属三大构造单元,不论其各构造单元体还是其界带构造均甚为复杂,并受到多期次构造运动的制约,形成了大陆内部特异的造山过程.尽管在这一地域曾做过大量的地表地质工作和一些相关的地球物理工作,但对其壳、幔精细结构、深层动力过程,特别是同步穿越华北克拉通、秦岭-大巴造山带和扬子克拉通系统的耦合研究甚少.为了研究和探索该地域的壳、幔精细速度结构和其形成的深层过程,专门布置了一条北起榆林,向南经咸阳、宁陕直抵涪陵长达1000 km的高精度地震宽角反射、折射波场探测剖面.通过剖面辖区高分辨率的数据采集,数据处理、反演和壳、幔层、块精细速度结构,发现剖面辖区深部壳、幔结构存在特异的速度和结构变化,并厘定了一系列的新认识.研究结果表明:(1)秦岭—大巴造山带具有同一基底,其形成乃为结晶基底隆升所致,即它的形成仅涉及到上地壳的受力变形和空间状态.造山带与其南、北两侧的前陆盆地为陆内造山过程中同一深层过程的产物,但其沉积速率和形态却不相同.华北克拉通与秦岭造山带之间前陆盆地Bfc拉张为该区Moho界面的局部隆升所致.(2)首次提出了沿1000 km长剖面连续的沉积建造、结晶基底、上地壳、下地壳和上地幔顶部的层、块速度结构和各界面的起伏变化与空间状态.基于地震波边界场响应厘定了华北克拉通、秦岭—大巴造山带和扬子克拉通的分区界带.论述了三大构造单元各自的内部结构和其相邻界域的速度变化特征.(3)该区大陆内部速度结构和不同类型断裂分布及层序在华北克拉通、秦岭—大巴造山带、扬子克拉通三大块体地域存在显著差异.不同规模、层次与产状的断裂分布反映出它们在变形行为和机制上及所受构造运动的制约上均存在明显的差异.  相似文献   

12.
控制碰撞造山带热异常形成的主要因素及其地质作用分析   总被引:1,自引:0,他引:1  
本文对剥蚀、逆冲断层剪切摩擦和放射性物质富集等因素对造山带热结构和热演化的影响进行了模拟计算以及定量分析,并对热异常与造山带内的若干地质现象之间的关系进行了讨论.在剪切生热模型的计算中考虑了逆冲断层的速度变化及其对热结构的影响,考察了断裂宽度与热结构之间的关系.计算中还考虑了两种热剪切计算模式,即:(1)瞬间推覆就位模式;(2)非瞬间推覆就位模式.从计算与讨论中得出如下认识:造山带后期的剥蚀使整个岩石层加热;剪切摩擦使壳内局部地区升温;放射性物质的富集主要使上部岩石层产生热异常.三者联合作用的结果使岩石层大幅度升温,从而形成造山带内部大范围的与其它地区不同的高温异常以及独特的地质特征.通过计算和讨论,文中认为:重熔型花岗岩和大量的构造岩是造山带内逆断层剪切作用的产物;与逆断层呈平行排列的拉张正断层是造山带在诸因素作用下升温,然后又经剥蚀,物质发生热收缩的结果.在造山带演化后期出现的这种拉张正断层代表造山带解体和向盆地转化的构造面貌.  相似文献   

13.
对那庐断裂带南段构造岩特别是中深层次韧性剪切带中的糜棱岩进行了研究自北向南于部庐断裂带主干断裂沿线选取6条有代表性的初一脆性剪切带进行地质测量,应用高分辨透射电子显微镜对构造岩中变形石英的位错结构进行观察,求得了韧性剪切作用下构造岩石所受的古差异应力和应变速率等一系列应变参数从显微构造角度提出了郊庐断裂带与大别一胶南造山带构造复合(叠加)的证据:构造岩石的一组应变参数是郊庐断裂带的产物,严格受其中的韧性剪切带控制,另一组系大别-胶南造山带与部庐断裂带复合的产物还讨论了都庐断裂带南段中深层次构造岩的变形一变质历史  相似文献   

14.
阴山造山带位于鄂尔多斯盆地的北缘,这一地带不仅是构造活动强、弱的变异地域,且为盆、山的耦合地带,故在造山带与盆地地域具有各异的深层动力过程.本文基于高精度人工源地震宽角反射、折射探测和高分辨率的数据采集,通过反演求得了满都拉—鄂尔多斯—榆林—延川长达650 km剖面辖区的岩石圈精细层、块结构.研究结果表明:①沿该剖面由南向北地壳厚度为40~45 km;在不同构造单元其介质、结构均不相同;速度分布、空间结构形态和界面起伏及属性亦存在着明显差异;上地幔顶部速度为8.0~8.1 km/s;②沿剖面存在5条深、大断裂,且将该区切割成为壳、幔结构明显差异的4个构造单元,即鄂尔多斯盆地、盆山耦合地带、阴山造山带、内蒙构造带,它们各自具有固有的深层过程和动力学响应.同时厘定了阴山造山带与内蒙构造带之间的白云鄂博深、大断裂带是古亚洲洋的南界.在这里不仅导致了阴山造山带的形成,而且聚集了诸多的金属矿产资源,地震亦频繁活动.基于上述研究表明,阴山造山带—鄂尔多斯盆地耦合地带的壳、幔结构复杂、呈现出速度结构各异的层、块状展布.显然,在这一错综的成山、成盆、成岩、成矿和成灾地带,有着特异的深层过程和动力机制.  相似文献   

15.
Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.  相似文献   

16.
Research on the relationship between faults and seismicity in the junction area of China's north-south seismic belt and central orogenic belt based on the Geography Information System (GIS) has been done.For each of the 16 faults in this area,we build a 25km buffer zone and use overlay analysis to investigate the seismicity and its characteristics on each fault.The results unveil the main seismic faults as follows:the western segment of the northern-edge of the west Qinling fault,the southwestern segment of the Lixian-Luojiabao fault,the southeastern segment of the Lintan-Dangchang fault,the southwestern segment of the Wenxian fault,the Huya fault,and the Xueshan fault.The most active faults are the Huya and Xueshan faults,then the Tazang fault,the Lixian-Luojiabao fault and the northern piedmont of the Guanggaishan-Dieshan fault.The research zone can be divided into four areas according to focal depth,which gets deeper from north to south.The profile of focal depth indicates the geometry and mechanical property of faults,and further reveals the movement model of eastward extrusion of the Tibetan plateau and southeastward escape of masses,thus providing basis for the protection against earthquakes and hazard mitigation in this area.  相似文献   

17.
秦岭-大别造山带横贯中国大陆中部,并将我国东部分为南北两部;即华北克拉通和扬子克拉通.在南、北相向运动力系驱动下构成了一个极为复杂的复合、叠加构造带、成矿带和地震活动带.同时导致了该地域异常变化的沉积建造和强烈起伏的结晶基底.然而对它们形成的地球物理边界场响应,岩相和结构的异常变化尚不清晰,特别对盆山之间的耦合响应更缺乏深层动力过程的理解.为此本文通过该区榆林-铜川-涪陵长1000 km剖面的地震探测和研究结果提出:(1)沉积建造厚度变化为4~10 km,结晶基底起伏强烈,幅度可达4~6 km;(2)一系列基底断裂将该区切割为南鄂尔多斯盆地和秦岭北缘前陆盆地、秦岭-大巴造山带和南缘前陆盆地与东北四川盆地,其中前陆盆地为秦岭北渭河盆地和秦岭南通江-万源盆地;(3)秦岭造山带是北部华北克拉通向南推挤、南部扬子克拉通向北推挤下隆升的陆内山体,并构筑了其南、北前陆盆地;(4)秦岭造山带的南、北边界并非是一条边界断层,而应是包括前陆盆地在内的组合界带;(5)秦岭与大巴弧形山系源于同一深部结晶基底,即同根生.这一系列的新认识对深化理解秦岭-大巴造山带形成的深层动力过程和演化机理及厘定扬子克拉通的真实北界具有极为重要的意义.  相似文献   

18.
安徽地区历史及现代地震活动与断裂活动性关系研究   总被引:2,自引:0,他引:2  
安徽地区处于华北板块与扬子板块沿着大别造山带的陆一陆碰撞变形带,构造背景复杂多样,断裂十分发育。郯庐断裂带长期控制着两侧的构造格局,大别山东缘的霍山地区多条断裂在晚第四纪有新活动。史料记载表明安徽地区历史地震以中强震为主,最高震级为M6 1/4级。根据区域地震地质、历史地震近年最新研究成果,对第四纪特别是晚第四纪以来的断裂活动习性做出归纳和分类,并分析历史地震、1970年后有仪器记载以来中等强度地震和小地震密集与断裂活动的相关性,为中长期地震预测提供依据。  相似文献   

19.
甘肃马衔山北缘断裂西北段几何结构及其新活动   总被引:2,自引:3,他引:2       下载免费PDF全文
甘肃马衔山北缘断裂在大地构造上属昆仑—祁连—秦岭加里东-华力西造山系,其西北段位于兰州中生代盆地内部。通过对该段的1∶10000条带状地质填图,弄清了其几何结构,获取了新活动时代、活动性质的若干地质地貌证据和年龄证据。结果表明,该段断裂由咸水沟—马泉沟、新城沟和青石咀3小段构成,其中咸水沟—马泉沟小段晚更新世—全新世活动,活动性质以左旋走滑为主,新城沟和青石咀两小段晚更新世以来未见活动。全新世晚期以来,咸水沟—马泉沟小段的左旋位移量5~8m,位移速率0.5~1.72mm/a  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号