共查询到20条相似文献，搜索用时 375 毫秒
1.
面波是地震勘探中常见的一种相干干扰,它的存在严重的影响着地震记录的信噪比.由于面波和有效波具有相关性且面波的频带和有效波的频带总有重叠的部分,在时域或频域二者不能明显分开,因此在时域或频域采用切除法压制面波会造成子波畸变和有效信息的损失.本文提出一种利用方向导数迹变换压制面波的新方法.文中推导了方向导数迹变换的反变换公式.地震记录的方向导数迹变换(Directional Derivative Trace Transform,DDTT)由两部分组成,一部分主要体现面波,能量集中;另一部分主要体现反射有效波,能量相对分散.根据这两部分能确定压制面波的阈值,通过这一阈值在正变换中压制面波后,再通过反变换返回时-空域就可达到压制面波的目的.理论和实际数据的处理都取得了令人满意的效果,表明了本文提出方法的可行性和有效性. 相似文献
2.
实际地震信号通常可表示为具有波形特征差异的多种基本波形信号的线性组合,如叠前道集中的工频干扰噪声与有效波信号、面波噪声与体波信号等.选择单一数学变换方法,往往不易实现地震信号的稀疏表示.近年来发展的形态成分分析理论,通过联合多种数学变换,可实现对复杂信号的稀疏表示.本文根据单道地震记录中面波与体波信号波形结构特征的差异性,提出一种基于形态成分分析的面波噪声衰减方法.针对面波的低频、窄带以及频散特性选择一维平稳小波变换作为其稀疏表示字典,而针对体波波形的局部相关特性选择局部离散余弦变换作为其稀疏表示字典,建立基于双波形字典的形态成分分析模型,通过求解该稀疏优化问题获得最终的信噪分离结果.理论模型和实际地震资料处理证实该方法不仅能够衰减单炮地震记录中的强面波干扰噪声,同时能够更好地保护有效信号的波形特征与频谱带宽,为地震资料的后续处理和分析提供良好的数据基础. 相似文献
3.
Seismic directional random noise suppression by radial‐trace time–frequency peak filtering using the Hurst exponent statistic 
下载免费PDF全文
下载免费PDF全文 Radial‐trace time–frequency peak filtering filters a seismic record along the radial‐trace direction rather than the conventional channel direction. It takes the spatial correlation of the reflected events between adjacent channels into account. Thus, radial‐trace time–frequency peak filtering performs well in denoising and enhancing the continuity of reflected events. However, in the seismic record there is often random noise whose energy is concentrated in certain directions; the noise in these directions is correlative. We refer to this kind of random noise (that is distributed randomly in time but correlative in the space) as directional random noise. Under radial‐trace time–frequency peak filtering, the directional random noise will be treated as signal and enhanced when this noise has same direction as the signal. Therefore, we need to identify the directional random noise before the filtering. In this paper, we test the linearity of signal and directional random noise in time using the Hurst exponent. The time series of signals with high linearity lead to large Hurst exponent value; however, directional random noise is a random series in time without a fixed waveform and thus its linearity is low; therefore, we can differentiate the signal and directional random noise by the Hurst exponent values. The directional random noise can then be suppressed by using a long filtering window length during the radial‐trace time–frequency peak filtering. Synthetic and real data examples show that the proposed method can remove most directional random noise and can effectively recover the reflected events. 相似文献
4.
面波噪声衰减是地震数据处理流程中的重要一环,传统的面波衰减方法主要依靠面波与有效信号的几何特征差异,在变换域中将两者进行分离.受复杂近地表因素的影响,面波往往呈现非线性特征,并且在变换域中面波与有效信号存在部分重叠,这都导致面波噪声与有效信号难以彻底分离,消除面波的同时也损伤了有效信号.针对这一问题,本文综合利用Curvelet变换对地震数据的稀疏表征特性以及地震子波支撑来构建方程,通过Curvelet域稀疏约束来恢复压制面波时损失掉的有效信号.文中对该方法进行了模型试算和实际资料处理,处理结果表明:本文方法能够在一定程度上恢复损失的有效信号,提高了面波压制方法的保幅性. 相似文献
5.
径向道变换(Radial Trace Transform)是将地震道集振幅值从偏移距一双程旅行时坐标系变换到视速度-双程旅行时坐标系,通过这种坐标系的变换,使相干噪声与有效信号在视速度和频率方面都有效分离.本文在介绍RT变换基本原理基础上,分析了RT变换中两种常用插值方法及其特点.并利用对模拟地震资料的处理,证明了RT域模拟-相减法较其带通滤波法在相干噪声压制与反射信号保持方面具有明显优势.最后,根据噪声特点,通过选择合理RT滤波参数,对实际地震资料进行处理试验,获得了较好的去噪效果,明显提高了资料信噪比,验证了研究方法的有效性. 相似文献
6.
经验模态分解算法(EMD)是一种基于有效波和噪声尺度差异进行波场分离的随机噪声压制方法,但由于实际地震数据波场复杂,导致模态混叠较严重,仅凭该方法进行去噪很难达到理想效果.本文基于EMD算法对信号多尺度的分解特性,结合Hausdorff维数约束条件,提出一种用于地震随机噪声衰减的新方法.首先对地震数据进行EMD自适应分解,得到一系列具有不同尺度的、分形自相似性的固有模态分量(IMF);在此基础上,基于有效信号和随机噪声的Hausdorff维数差异,识别混有随机噪声的IMF分量,对该分量进行相关的阈值滤波处理,从而实现有效信号和随机噪声的有效分离.文中从仿真信号试验出发,到模型地震数据和实际地震数据的测试处理,同时与传统的EMD处理结果相对比.结果表明,本文方法对地震随机噪声的衰减有更佳的压制效果. 相似文献
7.
地震勘探资料噪声压制及信噪比提高是整个地震勘探信号处理过程中的重要任务,随着地震勘探深度的增加及其复杂性,人们对地震数据质量的要求越来越高.勘探环境的复杂化使得采集到的地震资料中有效信号被大量噪声淹没,无法清晰辨识,严重影响后续的数据处理与解释.小波去噪是地震勘探中常用且发展较成熟的一种方法,但是其涉及到的阈值函数选取问题一直令人困扰,虽然已有多种阈值函数被提出,但仍存在各自的缺陷.本文利用小波分解在时域及频域良好的信号细节体现特性,引入模式识别中的非负矩阵分解(NMF)谱分离思想,针对小波系数阈值优化问题,提出了一种小波域图非负矩阵分解(GNMF)消噪算法.该方法首先在小波分解基础上,利用GNMF算法实现小波分解系数谱中信号分量与噪声分量的谱分离,然后通过反变换重构各分离子谱对应的子信号,最后利用K均值聚类算法将得到的多个子信号划分为信号类及噪声类,最终得到重构信号及分离噪声.合成记录和实际地震资料的消噪结果验证了新方法在提高信号与噪声分离准确性和精度方面的有效性,同时新方法避免了阈值选取造成的噪声压制不理想或有效成分损失问题.与小波消噪结果的对比及数值分析也说明了新方法在噪声压制及有效成分保持方面的优势. 相似文献
8.
Vibroseis data recorded at short source–receiver offsets can be swamped by direct waves from the source. The signal-to-noise ratio, where primary reflections are the signal and correlation side lobes are the noise, decreases with time and late reflection events are overwhelmed. This leads to low seismic resolution on the vibroseis correlogram. A new precorrelation filtering approach is proposed to suppress correlation noise. It is the ‘squeeze-filter-unsqueeze’ (SFU) process, a combination of ‘squeeze’ and ‘unsqueeze’ (S and U) transformations, together with the application of either an optimum least-squares filter or a linear recursive notch filter. SFU processing provides excellent direct wave removal if the onset time of the direct wave is known precisely, but when the correlation recognition method used to search for the first arrival fails, the SFU filtering will also fail. If the tapers of the source sweeps are badly distorted, a harmonic distortion will be introduced into the SFU-filtered trace. SFU appears to be more suitable for low-noise vibroseis data, and more effective when we know the sweep tapers exactly. SFU requires uncorrelated data, and is thus cpu intensive, but since it is automatic, it is not labour intensive. With non-linear sweeps, there are two approaches to the S,U transformations in SFU. The first requires the non-linear analytical sweep formula, and the second is to search and pick the zero nodes on the recorded pilot trace and then carry out the S,U transformations directly without requiring the algorithm or formula by which the sweep was generated. The latter method is also valid for vibroseis data with a linear sweep. SFU may be applied to the removal of any undesired signal, as long as the exact onset time of the unwanted signal in the precorrelation domain is known or determinable. 相似文献
9.
分辨率是地震资料处理的重要问题,常以子波能量展布和震荡长度来定量分析,决定于地震资料的主频和频宽.越来越复杂的勘探对象要求高分辨率算法提供更丰富的波形和相位信息.实践表明自适应滤波方法在提高地震资料分辨率的同时,处理结果表现出更丰富的信息.在对APES方法的自适应滤波原理进行理论探讨和模型分析基础上,提出了加权方式的改进算法(WAPES).通过统计实验,对改进前后的方法在信噪比和分辨率方面的表现进行了定量分析,同时设计典型模型试验来证明新方法的适用性.最后,改进后的方法应用于实际工区资料的处理,取得了很好的应用效果. 相似文献
10.
Inspired by the idea of the iterative time–frequency peak filtering, which applies time–frequency peak filtering several times to improve the ability of random noise reduction, this article proposes a new cascading filter implemented using mathematic morphological filtering and the time–frequency peak filtering, which we call here morphological time–frequency peak filtering for convenience. This new method will be used mainly for seismic signal enhancement and random noise reduction in which the advantages of the morphological algorithm in processing nonlinear signals and the time–frequency peak filtering in processing nonstationary signals are utilized. Structurally, the scheme of the proposed method adopts mathematic morphological operation to first preprocess the signal and then applies the time–frequency peak filtering method to ultimately extract the valid signal. Through experiments on synthetic seismic signals and field seismic data, this paper demonstrates that the morphological time–frequency peak filtering method is superior to the time–frequency peak filtering method and its iterative form in terms of valid signal enhancement and random noise reduction. 相似文献
11.
随机噪声的影响在地震勘探中是不可避免的,常规的随机噪声压制方法在处理中往往会破坏具有时空变化特征的非平稳有效地震信号,影响地震数据的准确成像.当前油气勘探的目标已经转变为“两宽一高”,随着数据量的增大,对去噪方法的处理效率也提出了更高的要求.因此,开发高效的非平稳地震数据随机噪声压制方法具有重要意义.预测滤波技术广泛用于地震随机噪声的衰减,本文基于流式处理框架提出一种新的f-x域流式预测滤波方法,通过在频率域建立预测自回归方程,运用直接复数矩阵逆运算代替迭代算法求解非平稳滤波器系数,实现时空变地震同相轴预测,提高自适应预测滤波的计算效率.通过与工业标准的FXDECON方法和f-x域正则化非平稳自回归(RNA)方法进行对比,理论模型和实际数据的测试结果表明,提出的f-x域流式预测滤波方法能更好地平衡时空变有效信号保护、随机噪声压制和高效计算三者之间的关系,获得合理的处理效果. 相似文献
12.
To improve the data quality of converted waves, and better identify and suppress the strong ground-roll interference in three-component (3C) seismic recordings on land, we present an adaptive polarization filtering method, which can effectively separate the groundroll interference by combining complex polarization and instantaneous polarization analysis. The ground roll noise is characterized by elliptical plane polarization, strong energy, low apparent velocity, and low frequency. After low-pass filtering of the 3C data input within a given time-window of the ground roll, the complex covariance matrix is decomposed using the sliding time window with overlapping data and length that depends on the dominant ground-roll frequency. The ground-roll model is established using the main eigenvectors, and the ground roll is detected and identified using the instantaneous polarization area attributes and average energy constraints of the ground-roll zone. Finally, the ground roll is subtracted. The threshold of the method is stable and easy to select, and offers good groundroll detection. The method is a robust polarization filtering method. Model calculations and actual data indicate that the method can effectively identify and attenuate ground roll while preserving the effective signals. 相似文献
13.
高频噪声压制是高分辨率地震数据处理中提高信噪比的关键性问题.本文针对f-x(频率-空间)反褶积空间预测滤波器无法处理非平稳、非线性信号的缺点,提出了一种基于高通滤波的频率-空间域经验模态分解(Empirical Mode Decomposition in the frequency-space domain,f-xEMD)压制地震剖面中高频噪声的方法.该方法采用全域高通滤波从原始数据中分离出含有部分有效信号的高频数据,将其变换到f-x域,然后在滑动的短窗口内提取每一个频率的空变数据序列进行EMD分解得到高频复本征模态函数(Intrinsic Mode Function,IMF)IMF1,将所有频率的IMF1序列反Fourier变换到时间域得到噪声剖面,将其与原始数据相减,达到高频噪声压制的目的.该方法可克服传统EMD分解方法中的模态混叠现象,保护陡倾角反射同相轴;压制后的噪声剖面中不包含有效信号能量,地震剖面的信噪比得到了提高.模拟数据和实际数据处理结果充分证明了该方法的有效性. 相似文献
14.
We propose to adopt a deep learning based framework using generative adversarial networks for ground-roll attenuation in land seismic data. Accounting for the non-stationary properties of seismic data and the associated ground-roll noise, we create training labels using local time–frequency transform and regularized non-stationary regression. The basic idea is to train the network using a few shot gathers such that the network can learn the weights associated with noise attenuation for the training shot gathers. We then apply the learned weights to test ground-roll attenuation on shot gathers, that are not a part of training input to obtain the desired signal. This approach gives results similar to local time–frequency transform and regularized non-stationary regression but at a significantly reduced computational cost. The proposed approach automates the ground-roll attenuation process without requiring any manual input in picking the parameters for each shot gather other than in the training data. Tests on field-data examples verify the effectiveness of the proposed approach. 相似文献
15.
Further improvement of temporal resolution of seismic data by autoregressive (AR) spectral extrapolation 总被引：1，自引：0，他引：1
Hakan Karsl&#x; 《Journal of Applied Geophysics》2006,59(4):324-336
Seismic data have still no enough temporal resolution because of band-limited nature of available data even if it is deconvolved. However, lower and higher frequency information belonging to seismic data is missing and it is not directly recovered from seismic data. In this paper, a method originally applied by Honarvar et al. [Honarvar, F., Sheikhzadeh, H., Moles, M., Sinclair, A.N., 2004. Improving the time-resolution and signal–noise ratio of ultrasonic NDE signals. Ultrasonics 41, 755–763.] which is the combination of the most widely used Wiener deconvolution and AR spectral extrapolation in frequency domain is briefly reviewed and is applied to seismic data to improve temporal resolution further. The missing frequency information is optimally recovered by forward and backward extrapolation based on the selection of a high signal–noise ratio (SNR) of signal spectrum deconvolved in signal processing technique. The combination of the two methods is firstly tested on a variety of synthetic examples and then applied to a stacked real trace. The selection of necessary parameters in Wiener filtering and in extrapolation are discussed in detail. It is used an optimum frequency windows between 3 and 10 dB drops by comparing results from these drops, while frequency windows are used as standard between 2.8 and 3.2 dB drops in study of Honarvar et al. [Honarvar, F., Sheikhzadeh, H., Moles, M., Sinclair, A.N., 2004. Improving the time-resolution and signal–noise ratio of ultrasonic NDE signals. Ultrasonics 41, 755–763.]. The results obtained show that the application of the purposed signal processing technique considerably improves temporal resolution of seismic data when compared with the original seismic data. Furthermore, AR based spectral extrapolated data can be almost considered as reflectivity sequence of layered medium. Consequently, the combination of Wiener deconvolution and AR spectral extrapolation can reveal some details of seismic data that cannot be observed in raw signal or which lost during the previous processing. 相似文献
16.
基于混合时频分析技术的地震数据噪声压制(英文) 总被引：2，自引：2，他引：0
针对复杂地质结构、陡倾角相干噪声、空间采样不均匀等情况下F-x域反褶积去噪技术的不足,提出首先应用具有时-频聚集性度量准则的广义S变换将时间-空间域的地震数据变换至时间-频率-空间域(t-f-x)的数据,在t-f-x域中对每一个频率切片应用经验模态分解(EMD),移除噪声占主导地位的本征模态函数以压制相干和随机噪声的滤波方法。模型分析表明第一本征模态函数表征的高频信息以噪声为主,移除第一本证模态函数可以达到压制噪声的目的。经广义S变换后形成t-f-x域中EMD滤波方法等效于具有依赖于空间位置、频率、高波数截断特征的自适应f-k滤波。此滤波方法考虑了数据的局部时-频特征,且具有执行简单的特点。与AR预测滤波方法比较,此法滤除的成分包含较少的低波数的信息,滤除的成分非常的局部化,且获得结果没有表现出过度平滑的特征。实际资料的应用表明在经广义S变换后形成t-f-x域中运用EMD滤波方法能够有效地压制随机和陡倾角相干噪声。 相似文献
17.
宽频带地震观测数据中有效信号和干扰噪声经常发生混频效应,常规的频率域滤波方法很难将二者分离.地震波信号属于时变非平稳信号,时频分析方法能够同时得到地震波信号随着时间和频率变化的振幅和相位特征,S变换是其中较为高效的时频分析工具之一.本文以S变换为例,提出了基于相位叠加的时频域相位滤波方法.与传统叠加方法相比,相位叠加方法对强振幅不敏感,对波形一致性相当敏感,更加利于有效弱信号信息的检测.时频域相位滤波方法滤除与有效信号不相干的背景噪声,保留了相位一致的有效信号成分,显著提高了信噪比.运用理论合成的远震接收函数数据和实际的宽频带地震观测数据检验结果显示该方法较传统的带通滤波方法相比,即使在信噪较低且混频严重条件下,时频域相位滤波方法的滤波效果依然很明显,有助于识别能量较弱的有效信号. 相似文献
18.
背景噪声与地震信号的强度或周期差异决定地震震相是否可从视觉上有效识别.为寻找平稳背景噪声中地震信号的视觉可识别判据,研究能反映两者频率差异及强度差异的参量用于上述两种信号对比,得到背景噪声中地震信号视觉可识别条件的量化判据,并用实际观测资料及仿真数据进行验证.在此基础上,针对功率谱计算过程中的校正环节进行讨论,利用Albuquerque实验室给出的测试实例阐明USGS标准中功率谱计算的规范步骤及细节. 相似文献
19.
针对地震勘探随机噪声的压制,本文应用拉伸厄米特高斯函数设计出方向可控滤波器.根据时空域上随机噪声的无方向性与有效信号的有向性的区别,通过局部数字特征,对数据进行选择后重组信号.方向选择性的增加,使得滤波过程能与不同方向的轴进行匹配,噪声被压制的同时保持信号的幅度;方向可调性,使得计算效率提高,且所需存储空间减少.仿真实验表明,采用此方法,信号保幅性和去噪效果均比传统的小波算法以及Curvelet变换好,在-5db信噪比下,本文方法保幅度为92.99%,信噪比提升221.774%,在实际地震信号处理中有明显的抑制噪声、保持有用信号的效果. 相似文献
20.
In this paper, we propose a non-local, transform domain noise suppression framework to improve the quality of seismic reflection data. The original non-local means (NLM) algorithm measures similarities in the data domain and we generalize it in the nonsubsampled contourlet transform (NSCT) domain. NSCT gives a multiscale, multiresolution and anisotropy representation of the noisy input. The redundancy information in NSCT subbands can be utilized to enhance the structures in the original seismic data. Like the wavelet transform, NSCT coefficients in each subband follow the generalized Gaussian distribution and the parameters can be estimated using appropriate techniques. These parameters are used to construct our proposed NSCT domain filtering algorithm. Applications for synthetic and real seismic data of the proposed algorithm demonstrate its effectiveness on seismic data random noise suppression. 相似文献