共查询到20条相似文献，搜索用时 140 毫秒
1.
《地球物理学进展》2017,(3)
郯庐断裂带是中国东部大陆一条深大断裂带,也是规模最大的第四纪活动构造带和地震活动带,断裂带及邻区现代构造应力场明显控制了活动断裂的运动方式、活动强度和地震活动等,深入研究郯庐断裂带及邻区地壳浅层应力环境,对于探讨断裂带现今活动性无疑具有重要的科学意义.在总结前人研究成果的基础上,本文首先依据郯庐断裂带及邻区(山东-环渤海-辽宁)6个600~1000 m深孔地应力实测数据,初步揭示断裂带及邻区地壳浅层应力分布规律,并分析其在不同构造部位之间的差异;其次,结合研究区已有其他基础应力数据(震源机制解、钻孔崩落、应力解除及断层滑动矢量反演数据等),详细分析断裂带及邻区现今构造应力场及其对断裂活动方式的影响;最后依据库仑破裂摩擦准则,从力学角度分别探讨不同的应力状态和摩擦强度对郯庐断裂带山东、渤海及辽宁段现今活动稳定性的影响,同时参考断裂带及邻区近代地震活动分布特征,积极探索活动断裂带附近深孔地应力测量在地震地质研究领域中的应用思路. 相似文献
2.
郯庐断裂带地震活动特征 总被引：2，自引：0，他引：2
本文较为详细地研究了郯庐断裂带及附近地区的地震活动，其主要结果为：１、郯庐断裂带地震活动由四个地震活动区段组成，该带活动的主体区段是那城─—渤海─—海城．２、郯庐断裂带地震活动的周期性是形成邦城─—海城区段中强地震活动的主要原因．３、郯庐断裂带中北段（邦城─—海城）Ｍ≥６．０级地震具有较好的迁移规律．４、郯庐断裂带近代小震活动表现出南段随机性，中段呈线性，北段具有密集区带性等特点。５、郯庐断裂带震源深度表现出南、北段浅，中段深，且散度大的特点。６、郯庐断裂带Ｑ值分布表明，沂沭带介质强度的完整性较差。 相似文献
3.
《地震工程学报》2017,(Z1)
收集郯庐断裂带中南段及附近区域2009年以来的小震初动资料,利用格点尝试法求得51个台站的综合机制解和167次小震的震源机制解,采用Michael的应力张量求解方法获得区域应力场分布;同时利用震源机制三角形分类方法,对51个台站综合机制解的变形形式进行分类,探讨其空间分段特征。结果表明:研究区域的主压应力方向以NEE和近EW向为主,沿郯庐断裂带中南段由北往南,主压应力方向由NEE向逐渐偏转为近EW向;郯庐断裂带中南段变形特征存在局部差异,山东段以走滑型机制为主,兼有部分正断层震源机制;江苏段及安徽北段,郯庐断裂带带内及其东侧集中表现为逆冲断层类型,西侧则以走滑型为主;安徽段南端,郯庐断裂带东西两侧,震源机制分别以走滑型和正断型机制为主。 相似文献
4.
2008年5月12日四川汶川8.0级地震与部分余震的震源机制解 总被引：4，自引：0，他引：4
采用区域和远台Pn或Pg初至波初动符号, 利用下半球等面积投影, 求解了2008年5月12日四川汶川8.0级地震和截止到2008年12月10日发生的部分4级以上余震的震源机制解。 汶川8.0级地震的震源机制为: 节面Ⅰ的走向为5°, 倾角为48°, 滑动角为39°; 节面Ⅱ的走向为247°, 倾角为62°, 滑动角为131°。 P轴方位角为309°, 仰角为8°, T轴方位角为208°, 仰角为54 °, B轴方位角为44°, 仰角为35°。 结合地质构造和余震空间分布, 可以确定节面Ⅱ为发震断层面。 根据震源机制解, 引发本次地震的断层活动主要表现为逆冲, 主破裂面为S67°W与该地震所在断层的走向基本一致(断裂总体走向N45°E)[1]; 主压应力轴P轴为N51 °W, 主压应力轴P轴方位与该区域构造应力场方向基本一致。 根据余震震源机制解结果, 龙门山断裂带南段发生的余震与北段发生的余震的震源机制都具有优势分布, 且两者差异明显。 早期发生在南段的余震的破裂是以逆倾滑动为主, 兼有走向滑动; 而随着时间的推移, 余震向北段迁移, 在龙门山构造的北段地震震源的破裂方式以走向滑动为主, 兼有一定的逆倾滑动; 龙门构造带南段震源应力场受主震应力场的控制, 而龙门构造带北段震源应力场不仅受区域应力场的影响, 还受主震应力场的影响。 相似文献
5.
《地震工程学报》2018,(Z1)
以四川地区2008—2015年期间发生的ML4.0～6.0地震为例,利用四川区域台网宽频带波形资料,采用CAP(Cut and paste)方法计算其震源机制解和最佳震源深度,在此基础上分析地震震源机制解和震源深度空间分布特征。结果表明:(1)四川地区地震震源机制解类型存在显著空间分区特征。逆冲型地震集中分布在龙门山断裂带和川东盆地,揭示青藏高原的巴颜喀拉地块与华南地块的相互作用方式——强挤压。走滑型地震绝大多数分布在川西高原和攀西地区,这是由于印度板块向北东推挤和青藏高原物质向东扩张所导致的上地壳物质沿大型断层滑移。正断型地震主要分布在金沙江断裂带北段和汶川大震主震区,金沙江断裂带北段的拉张应力状态应是由青藏高原东部下地壳物质流动对上地壳物质有拖曳作用,与多力源组合共同作用决定的;而汶川主震区的正断型地震应是主震后震源区不同来源动力作用的复杂应力调整现象。其他类型地震都分布在龙门山断裂带,属于汶川或芦山地震的余震活动,其成因为大震后震源区不同来源应力作用使主应力方向倾斜偏离了水平面和垂直面而引起的应力变形。(2)震源机制解参数中的P、T、N轴反映了地震前后震源区应力状态的变化,是震源区构造应力的一种体现。四川地区构造地震的P、T轴方位空间展布存在地区差异:川西高原地区以约31°纬线为界,北部区域P轴方位呈NEE向,南部区域呈SEE向(平均约E19°S);龙门山断裂带南段P轴方位呈SEE向(平均约E25°S),中、北段P轴方向离散,无优势方位;攀西地区P轴方位呈SE向(平均约E51°S);T轴方位在川西高原呈近SN向拉张,在攀西地区又转为NE向,呈顺时针旋转趋势。(3)四川地区地震震源深度空间分布差异显著。从整体来看,四川地区地壳优势孕震层深度范围为5～15km,深度更深的地震分布在地壳厚度存在异常的大型断裂带(龙门山、小金河断裂带)或盆地至高原的过渡地带(乐山、犍为等地)。龙门山断裂带地震震源深度空间分布呈现出西南深、东北浅的特征,西南段地震震源最深达26km,中、北段地震震源最深达19km;且断裂带上走滑型地震相对于逆冲型和正断型地震存在震源深度偏浅的现象。川东盆地地震震源深度空间分布展显出西南深、东南浅的特征,盆地东南部地震震源深度分布范围为2～5km。揭示出四川地区地震震源是沿活动的脆性上地壳分布。 相似文献
6.
7.
郯庐断裂带(即郯城-庐江断裂带)是纵贯中国东部大陆边缘的一条巨型断裂带,整体为北北东走向。它的形成和演化对中国东部中生代以来的地质演化有明显控制作用,同时又是一条现今地震活动较为活跃的地震带,因此对郯庐断裂带周边构造应力场的研究具有重要的意义。采用野外观测取得的10个测点共206条活断层擦痕数据,利用断层滑动资料反演构造应力张量的方法,计算获得了研究区现代构造应力场主要特征:郯庐断裂及其周边地区现代构造应力场以北东-东西向挤压、北西-近南北向拉张为特征,其最大主压应力(σ1)方向为64°一106°,平均倾角23%最小主压应力(σ3)方向为332°~14°,平均倾角14°;中间主应力(σ2)倾角较陡,近垂直,应力结构为走滑型。 相似文献
8.
基于中国国家和区域数字地震台网记录,采用CAP方法反演了2012年9月7日云南彝良5.7、5.6级地震的震源机制解和震源深度,并利用IRIS提供的远震记录深度震相(P、PP、SP)进一步确定了震源深度,最后结合地震序列分布、地震烈度分布和区域地质背景讨论了发震构造.结果显示彝良5.7级地震的震源机制解为节面I走向243°、倾角62°、滑动角149°,节面Ⅱ走向349°、倾角63°、滑动角32°;5.6级地震的震源机制解为节面I走向241°、倾角37°、滑动角162°,节面Ⅱ走向346°、倾角79°、滑动角54°,这两次地震的发震构造均为NE走向的石门断裂,震源矩心深度均为6 km左右,表明地震的能量释放主要发生在地壳浅部,这也是导致震区严重灾害的一个重要原因. 相似文献
9.
针对2013年7月22日甘肃岷县漳县发生的Ms6.6地震序列,采用CAP(Cut and Paste)方法反演了岷县漳县6.6级地震及部分强余震的震源机制解。结果显示,6.6级主震最佳双力偶解节面I走向189°,倾角51°,滑动角142°;节面II参数走向305°,倾角61°和滑动角46°,主震为逆冲兼走滑型,矩心震源深度均为7km;8次Ms≥3.0余震震源机制解向NE倾的节面II的优势倾角约为52°,表现出逆冲分量大的特性。结合震区的活动构造、余震及烈度分布,判定节面II代表了相应地震的发震断层面,地震序列震源机制的特性反映了与临潭一宕昌断裂带相似的活动特征,分析认为,岷县漳县6.6级地震的发生与临潭-宕昌断裂的活动可能存在一定的相关性。 相似文献
10.
利用FOCMEC方法反演了2011年9月10日江西瑞昌与湖北阳新交界MS4.6地震的震源机制解。反演结果为:节面I的走向304°,倾角76°,滑动角4°;节面Ⅱ的走向213°,倾角86°,滑动角165°;P轴的方位角、倾角分别为260°、7°;T轴的方位角、倾角分别为168°、13°;B轴的方位角、倾角分别为19°、75°。其中节面Ⅱ的走向和活动性质与震中附近的郯庐断裂带的分支断裂——池河—西山驿断裂较为接近。分析认为NNE向的池河—西山驿断裂可能是瑞昌—阳新MS4.6地震的发震构造。 相似文献
11.
利用Snoke方法计算赣北地区2008—2015年11个M_L≥3.0中小地震震源机制。结果表明,其P轴和T轴方向与该区域构造应力场基本一致。赣北地区以近EW向挤压、近NS向拉张的构造应力为主。区域内断层错综复杂,以走滑、正断型为主。其中九江—瑞昌地区受襄樊—广济断裂、郯庐断裂相互作用,在方向稳定的构造应力作用下,易发生走滑型为主的地震。 相似文献
12.
In recent years, there have been few researches and analysis published on the seismic activity and stress state in Shandong segment of Tanlu fault zone using digital seismological methods such as seismic apparent stress, focal mechanism solution and so on. In this paper, source parameters such as focal mechanism solutions and apparent stress are calculated using the waveform data of ML≥1 moderate-small earthquakes in Shandong segment of Tanlu fault zone recorded by Shandong digital seismic network since 2007. According to focal mechanism solutions, a statistical analysis is done on the focal dislocation types in the study area using triangle graphical method, and the results show that the faulting in this area is mainly of strike-slip mechanism, and there are less thrust and normal mechanism. Calculation with the mean stress tensor method illustrates that the direction of mean principle stress of Shandong segment of Tanlu fault zone is NEE-SWW, which is the result of the combined effect of the subduction of West Pacific plate and the extrusion of Indian plate to Eurasian plate; the small dip angle indicates that the mode of action of stress is nearly horizontal, and the direction of principal stress axis is nearly perpendicular to the Tanlu fault zone. Under the action of such compressive stress field, dislocation is not likely to occur and the stress accumulation is enhanced on both sides of the fault. The apparent stress is calculated using the source spectral parameters method. Apparent stress has positive correlation with the magnitude and increases with the increased magnitude. So we get apparent stress difference by subtracting the empirical fitting value from the apparent stress. By removing the impact of magnitude, and according to the temporal-spatial evolution image of apparent stress difference, we found that the apparent stress in Shandong segment of Tanlu fault zone generally has a trend of decrease starting from the Wenchuan earthquake in 2008, and the spatial distribution of apparent stress in the region is very uneven. Combined with the spatial distribution of b values, the result shows that high stress is mainly located in Anqiu segment and Tancheng-Juxian segment, especially in Anqiu segment where small magnitude earthquakes appeared accompanying with the high stress. Low b-value means high stress and low frequency means low stress release, which indicates that Anqiu segment might accumulate higher stress and is at the fault locking stage. The research will provide new data for better understanding the present active feature and stress state of the Shandong segment of the Tanlu fault zone. 相似文献
13.
ANALYSIS ON STRUCTURAL FEATURES:INSIGHTS FROM SATELLITE-DERIVED GRAVITY MODEL AND SEISMIC PATTERN 
下载免费PDF全文
下载免费PDF全文 In this paper, based on a large number of cumulative observational data from the seismic monitoring network in China, we grid the research area to calculate the density values at each grid node and convert the qualitative earthquake epicenter distribution to quantitative seismic pattern. Minimum magnitude of completeness(MC)is determined by magnitude-rank analysis, which provides lower limit earthquake and original time. New satellite-derived gravity model v23.1, which is based on satellites CryoSat-2 and Jason-1 data, is used to determine the Bouguer gravity anomaly derived from free-air gravity anomaly and elevation database sets SRTM30, and ultimately, the complete Bouguer correction is obtained. In this paper, the Xingtai earthquake zone and Tanlu fault zone (Anhui segment) are selected for case study. Bouguer gravity anomaly presents a NE-trending U-shaped narrow strip in the Xingtai earthquake zone, and its location is consistent with Shulu Fault Basin. Grid density value contours are restricted by the U-shaped strip, and the extreme value of seismic activity density lies in the bottom of the U-shaped strip as shown in the cross section. The results of Bouguer gravity anomaly and upward continuations to the different heights show good linearity and gradient in the Tanlu fault zone (Anhui segment); and both long-axis direction of seismic pattern and nodal plane strike of seismogenic fault from focal mechanism solutions trend NNE. In short, the Tanlu fault zone(Anhui segment)is a large deep-seated fault that still has the ability to control seismic activity along it. Based on the measured gravity and magmatic data, using the edge detection TDX method to interpret the concealed boundary of the Anqing M4.8 earthquake near the Tanlu fault, and combining with the results from deep seismic reflection profiles of the study area, we discussed the causative fault of the Anqing earthquake. 相似文献
14.
15.
CHARACTERISTICS OF FOCAL MECHANISMS AND STRESS FIELD IN THE EASTERN BOUNDARY OF SICHUAN-YUNNAN BLOCK AND ITS ADJACENT AREA 下载免费PDF全文
下载免费PDF全文 This study is devoted to a systematic analysis of the stress state of the eastern boundary area of Sichuan-Yunnan block based on focal mechanisms of 319 earthquakes with magnitudes between M3.0 and M6.9, occurring from January 2009 to May 2018. We firstly determined the mechanism solutions of 234 earthquakes by the CAP method, using the broadband waveforms recorded by Chinese regional permanent networks, and collected 85 centroid moment tensor solutions from the GCMT. Then we investigated the regional stress regime through a damp linear inversion. Our results show that:1)the focal mechanisms of moderate earthquakes are regionally specific with three principal types of focal mechanisms:the strike-slip faulting type, the thrust faulting type and the normal faulting type. The strike-slip faulting type is significant in the eastern boundary area of Sichuan-Yunnan block along the Xianshuihe-Xiaojiang Fault, the Daliangshan Fault, and the Zhaotong-Lianfeng Fault. The thrust faulting type and the combined thrust/strike-slip faulting type are significant along the Mabian-Yanjin Fault, Ebian-Yanfeng Fault and the eastern section of Lianfeng Fault; 2)The most robust feature of the regional stress regime is that, the azimuth of principal compressive stress axis rotates clockwise from NWW to NW along the eastern boundary of Sichuan-Yunnan Block, and the clockwise rotation angle is about 50 degrees. Meanwhile, the angels between the principal compressive axis and the trend of eastern boundary of Sichuan-Yunnan Block remain unchanged, which implies a stable coefficient of fault friction in the eastern boundary fault zone of Sichuan-Yunnan Block. The movement of the upper crust in the southeastern Tibetan plateau is a relatively rigid clockwise rotation. On the whole, the Xianshuihe-Xiaojiang Fault is a small arc on the earth, and its Euler pole axis is at(21°N, 88°E). The Daliangshan Fault is surrounded by the Anninghe-Zemuhe Fault, which formed a closed diamond shape. When the Sichuan-Yunnan block rotates clockwise, the Daliangshan Fault locates in the outer of the arc, while the Anninghe-Zemuhe Fault is in the inward of the arc, and from the mechanical point of view, left-lateral sliding movement is more likely to occur on the Daliangshan Fault. Our results can be the evidence for the study on the "cut-off" function of the Daliangshan Fault based on the stress field background; 3)The regional stress regime of the eastern boundary faults zone of the Sichuan-Yunnan Block is the same as the south section of the Dalianshan Fault, and the focal mechanism results also reveal that the Dalianshan Fault is keeping left-lateral strike-slip. There may be the same tectonic stress field that controls the earthquake activities in the southern section of Daliangshan Fault and Zhaotong-Lianfeng Fault. The regional stress regime of Zhaodong-Lianfeng Fault is also the same with the Sichuan-Yunnan Block, which implies that the control effect of the SE movement of the Sichuan-Yunnan block may extend to Weining. 相似文献
16.
CHARACTERISTICS OF TECTONIC STRESS FIELD OF THE XIAOWAN RESERVOIR BEFORE AND AFTER THE IMPOUNDMENT 下载免费PDF全文
下载免费PDF全文 Using the seismic waveform data of Xiaowan seismic network and Yunnan seismic network, we determined the focal mechanisms of 36 earthquakes(ML ≥ 3.0)from Jun. 2005 to Dec. 2008 and 51 earthquakes(ML ≥ 2.5)from Jan. 2009 to Dec. 2015 by generalized polarity and amplitude technique.
We inverted tectonic stress field of the Xiaowan reservoir before impounding, using the focal mechanisms of 36 earthquakes(ML ≥ 3.0)from Jun. 2005 to Dec. 2008 and CAP solutions of 58 earthquakes(ML ≥ 4.0)collected and the solutions in the Global Centroid Moment Tensor(GCMT)catalog; We inverted local stress field of the reservoir-triggered earthquake clustering area, using 51 earthquakes(ML ≥ 2.5)from Jan. 2009 to Dec. 2015.
Focal mechanisms statistics show that, the Weixi-Qiaohou Fault is the seismic fault. Focal mechanisms were strike-slip type in initial stage, but normal fault type in later stage. Focal depths statistics of 51 earthquakes(ML ≥ 2.5)show that, the average value of focal depths in period Ⅰ, period Ⅱ and period Ⅲ are 8.2km, 7.3km and 7.8km respectively and the standard deviations are 4.3km, 3.5km and 6.0km respectively. The average value of focal depths is basically stable in different period, only the standard deviation is slightly different. Therefore, there is not positive connection between focal depth and deviation of focal mechanisms. What's more, there are 2 earthquakes(number 46 and number 47 in Fig.5 and Table 3)with almost the same magnitude, epicenter and focal depth, but they have different faulting types as normal and strike-slip. The focal mechanism of event No.46 is strike:302°, dip:40° and rake:-97° for plane Ⅰ, however, the focal mechanism of event No.47 is strike:292°, dip:82° and rake:140° for plane Ⅰ. Likewise, earthquake of number 3 and number 18 have similar characteristic. Therefore, the obvious focal mechanism difference of similar earthquake pair indicates the complexity of Weixi-Qiaohou Fault.
Considering the quiet-active character of reservoir-triggered earthquakes, we discussed the change of local stress field in different period. The σ1 of tectonic stress field was in the near-south direction, with a dip angle of 14° before the impoundment, however, the direction of σ1 of local stress field changed continuously, with the dip angle getting larger after the impoundment. The direction of σ1 of local stress field of reservoir-triggered earthquake clustering area is close to the strike of Weixi-Qiaohou Fault, and reservoir impoundment increased the shear stress in the fault, so the weakening of fault was beneficial to trigger earthquakes. Comprehensive analysis suggests that fluid permeation and pore pressure diffusion caused by the water impounding, and the weakening of fault caused by local stress field are the key factors to trigger earthquake in the Xiaowan reservoir. 相似文献
17.
利用垂直向和波振幅比方法计算了2003年1月至2009年10月间宁夏北部及邻区的31个中小地震震源机制解,然后对计算所得的31个地震震源机制解进行系统聚类及应力场分析,并利用格点尝试法研究阿拉善区域（I区）和银川盆地及以北地区（II区）的平均震源机制解。结果表明：31个中小地震中走滑型地震占了近77％,显示出宁夏北部及邻近地区地震错动方式以近走滑为主;I区域地震产生的震源区构造变形是近南北向发生压缩,近东西向发生相对扩张;II区域构造应力场主压应力方向以水平作用为主,地震产生的震源区构造变形是北东向发生压缩,北西向发生相对扩张。 相似文献
18.
COULOMB STRESS CHANGE ON ACTIVE FAULTS IN SICHUAN-YUNNAN REGION AND ITS IMPLICATIONS FOR SEISMIC HAZARD 下载免费PDF全文
下载免费PDF全文 Coulomb stress change on active faults is critical for seismic hazard analysis and has been widely used at home and abroad. The Sichuan-Yunnan region is one of the most tectonically and seismically active regions in Mainland China, considering some highly-populated cities and the historical earthquake records in this region, stress evolution and seismic hazard on these active faults capture much attention.
From the physical principal, the occurrence of earthquakes will not only cause stress drop and strain energy release on the seismogenic faults, but also transfer stress to the surrounding faults, hence alter the shear and normal stress on the surrounding faults that may delay, hasten or even trigger subsequent earthquakes. Previously, most studies focus on the coseismic Coulomb stress change according to the elastic dislocation model. However, the gradually plentiful observation data attest to the importance of postseismic viscoelastic relaxation effect during the analysis of seismic interactions, stress evolution along faults and the cumulative effect on the longer time scale of the surrounding fault zone. In this paper, in order to assess the seismic hazard in Sichuan-Yunnan region, based on the elastic dislocation theory and the stratified viscoelastic model, we employ the PSGRN/PSCMP program to calculate the cumulative Coulomb stress change on the main boundary faults and in inner blocks in this region, by combining the influence of coseismic dislocations of the M≥7.0 historical strong earthquakes since the Yongsheng M7.8 earthquake in 1515 in Sichuan-Yunnan region and M≥8.0 events in the neighboring area, and the postseismic viscoelastic relaxation effect of the lower crust and upper mantle.
The results show that the Coulomb stress change increases significantly in the south section of the Xianshuihe Fault, the Anninghe Fault, the northern section of the Xiaojiang Fault, the southern section of the Longmen Shan Fault, the intersection of the Chuxiong-Jianshui Fault and the Xiaojiang Fault, and the Shawan section of the Litang Fault, in which the cumulative Coulomb stress change exceeds 0.1MPa. The assuming different friction coefficient has little effect on the stress change, as for the strike-slip dominated faults, the shear stress change is much larger than the normal stress change, and the shear stress change is the main factor controlling the Coulomb stress change on the fault plane. Meanwhile, we compare the Coulomb stress change in the 10km and 15km depths, and find that for most faults, the results are slightly different. Additionally, based on the existing focal mechanism solutions, we add the focal mechanism solutions of the 5 675 small-medium earthquakes(2.5≤M≤4.9)in Sichuan-Yunnan region from January 2009 to July 2019, and invert the directions of the three principal stresses and the stress shape factor in 0.1°×0.1° grid points; by combining the grid search method, we compare the inverted stress tensors with that from the actual seismic data, and further obtain the optimal stress tensors. Then, we project the stress tensors on the two inverted nodal planes separately, and select the maximum Coulomb stress change to represent the stress change at the node. The results show that the cumulative Coulomb stress change increase in the triple-junction of Sichuan-Yunnan-Tibet region is also significant, and the stress change exceeds 0.1MPa.
Comprehensive analysis of the Coulomb stress change, seismic gaps and seismicity parameters suggest that more attention should be paid to the Anninghe Fault, the northern section of the Xiaojiang Fault, the south section of the Xianshuihe Fault, the southern section of the Longmen Shan Fault and the triple-junction of the Sichuan-Yunnan-Tibet region. These results provide a basis for future seismic hazard analysis in the Sichuan-Yunnan region. 相似文献
19.
QI Yu-ping ZHANG Zhi-wei LONG Feng XIAO Ben-fu LIANG Ming-jian LU Qian JIANG Peng 《地震地质》2018,40(2):377-395
The Daliangshan sub-block is a boundary region among the Bayan Har block, the Sichuan-Yunnan block and the South China block. It hosts four major fault systems:The southwest to south trending Xianshuihe-Zemuhe Fault zone in the west, the Longmenshan fault zone is the northern boundary, the Zhaotong-Lianfeng fault zone in the south, and the NS-trending Mabian-Yanjin fault zone in the east. This study focused on focal mechanisms and the regional stress field of the Daliangshan sub-block to help understand the earthquake preparation process, tectonic deformation and seismic stress interaction in this area. We collected broadband waveform records from the Sichuan Seismic Network and used multiple 1-D velocity models to determine the focal mechanisms of moderate and large earthquakes(ML ≥ 3.5)in the Daliangshan sub-block by using the CAP method. Results for 276 earthquakes from Jan 2010 to Aug 2016 show that the earthquakes are dominated by strike-slip and trust faulting, very few events have normal faulting and the mixed type. We then derived the regional distribution of the stress field through a damp linear inversion(DRSSI)using the focal mechanisms obtained in this study. Inversion results for the spatial pattern of the stress field in the block suggest that the entire region is predominantly under strike-slip and trust faulting regimes, largely consistent with the focal mechanisms. The direction of maximum compression axes is NW-NWW, and part of the area is slightly rotated, which is consistent with the GPS velocity field. Combining geodynamic background, this work suggests that because the Sichuan-Yunnan block is moving to SE and the Tibetan plateau to SE-E along major strike-slip faults, the stress field of the Daliangshan sub-block and its adjacent regions is controlled jointly by the Bayan Har block, the Sichuan-Yunnan block and the South China block. 相似文献
20.
On August 8, 2017, Beijing time, an earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, Sichuan Province, with the epicenter located at 33.20°N 103.82°E. The earthquake caused 25 people dead, 525 people injured, 6 people missing and 170000 people affected. Many houses were damaged to various degrees. Up to October 15, 2017, a total of 7679 aftershocks were recorded, including 2099 earthquakes of M ≥ 1.0.
The M7.0 Jiuzhaigou earthquake occurred in the northeastern boundary belt of the Bayan Har block on the Qinghai-Tibet Plateau, where many active faults are developed, including the Tazhong Fault(the eastern segment of the East Kunlun Fault), the Minjiang fault zone, the Xueshan fault zone, the Huya fault zone, the Wenxian fault zone, the Guanggaishan-Daishan Fault, the Bailongjiang Fault, the Longriuba Fault and the Longmenshan Fault. As one of the important passages for the eastward extrusion movement of the Qinghai-Tibet Plateau(Tapponnier et al., 2001), the East Kunlun fault zone has a crucial influence on the tectonic activities of the northeastern boundary belt of Bayan Kala. Meanwhile, the Coulomb stress, fault strain and other research results show that the eastern boundary of the Bayan Har block still has a high risk of strong earthquakes in the future. So the study of the M7.0 Jiuzhaigou earthquake' seismogenic faults and stress fields is of great significance for scientific understanding of the seismogenic environment and geodynamics of the eastern boundary of Bayan Har block.
In this paper, the epicenter of the main shock and its aftershocks were relocated by the double-difference relocation method and the spatial distribution of the aftershock sequence was obtained. Then we determined the focal mechanism solutions of 24 aftershocks(M ≥ 3.0)by using the CAP algorithm with the waveform records of China Digital Seismic Network. After that, we applied the sliding fitting algorithm to invert the stress field of the earthquake area based on the previous results of the mechanism solutions. Combining with the previous research results of seismogeology in this area, we discussed the seismogenic fault structure and dynamic characteristics of the M7.0 Jiuzhaigou earthquake. Our research results indicated that:1)The epicenters of the M7.0 Jiuzhaigou earthquake sequence distribute along NW-SE in a stripe pattern with a long axis of about 35km and a short axis of about 8km, and with high inclination and dipping to the southwest, the focal depths are mainly concentrated in the range of 2~25km, gradually deepening from northwest to southeast along the fault, but the dip angle does not change remarkably on the whole fault. 2)The focal mechanism solution of the M7.0 Jiuzhaigou earthquake is:strike 151°, dip 69° and rake 12° for nodal plane Ⅰ, and 245°, 78° and -158° for nodal plane Ⅱ, the main shock type is pure strike-slip and the centroid depth of the earthquake is about 5km. Most of the focal mechanism of the aftershock sequence is strike-slip type, which is consistent with the main shock's focal mechanism solution; 3)In the earthquake source area, the principal compressive stress and the principal tensile stress are both near horizontal, and the principal compressive stress is near east-west direction, while the principal tensile stress is near north-south direction. The Jiuzhaigou earthquake is a strike-slip event that occurs under the horizontal compressive stress. 相似文献