共查询到20条相似文献，搜索用时 15 毫秒
1.
提出一种自适应协方差的时频域极化滤波方法。该方法在广义S变换时频方法的基础上,构造时频域自适应协方差矩阵,通过特征分析计算时频域瞬时极化参数,设计极化滤波器,实现多分量地震极化分析和滤波。其优势在于协方差矩阵的分析时窗的长度由多分量地震数据的瞬时频率确定,可以自适应于有效信号的周期,在每个时频点计算极化参数不需要进行插值处理;结合时间频率信息,解决在时间域或频率域波形或频率重叠的信号具有明显的直观性。模型数据及实际三分量台站地震数据处理结果表明,该极化滤波方法在台站地震资料分析和处理方面具有很好的直观性和较高的分辨率。 相似文献
2.
In the paper, we propose a surface wave suppression method in time-frequency domain based on the wavelet transform, considering the characteristic difference of polarization attributes, amplitude energy and apparent velocity between the effective signals and strong surface waves. First, we use the proposed method to obtain time–frequency spectra of seismic signals by using the wavelet transform and calculate the instantaneous polarizability at each point based on instantaneous polarization analysis. Then, we separate the surface wave area from the signal area based on the surface-wave apparent velocity and the average energy of the signal. Finally, we combine the polarizability, energy, and frequency characteristic to identify and suppress the signal noise. Model and field data are used to test the proposed filtering method. 相似文献
3.
为了恢复震动波能量在传播过程中产生的衰减损耗，提出基于褶积原理求取品质因子Q的方法与改进广义S变换相结合的反Q滤波法。通过震动波衰减补偿模型试验，对试验数据进行改进广义S变换的时频特性分析，得出了信号的能量分布情况以及时间频率对应关系；采用基于褶积原理求取品质因子的方法，得到时变Q值；对试验数据进行反Q滤波处理，使震动波能量得到了补偿。结果表明本文提出的反Q滤波法提高了对震动波能量衰减补偿的效果，拓宽了地震资料的频带，提高了地震资料分辨率，有利于进行高分辨率地震勘探、深部信号增强和油气藏预测工作的开展。 相似文献
4.
宽频带地震观测数据中有效信号和干扰噪声经常发生混频效应,常规的频率域滤波方法很难将二者分离.地震波信号属于时变非平稳信号,时频分析方法能够同时得到地震波信号随着时间和频率变化的振幅和相位特征,S变换是其中较为高效的时频分析工具之一.本文以S变换为例,提出了基于相位叠加的时频域相位滤波方法.与传统叠加方法相比,相位叠加方法对强振幅不敏感,对波形一致性相当敏感,更加利于有效弱信号信息的检测.时频域相位滤波方法滤除与有效信号不相干的背景噪声,保留了相位一致的有效信号成分,显著提高了信噪比.运用理论合成的远震接收函数数据和实际的宽频带地震观测数据检验结果显示该方法较传统的带通滤波方法相比,即使在信噪较低且混频严重条件下,时频域相位滤波方法的滤波效果依然很明显,有助于识别能量较弱的有效信号. 相似文献
5.
6.
A novel method of synthesizing seismic wave using wavelet reconstruction is proposed and compared with the traditional method of using theory of Fourier transform. By adjusting the frequency band energy and taking it as criterion, the formula of synthesizing seismic wave is deduced. Using the design parameters specified in Chinese Seismic Design Code for buildings, seismic waves are synthesized. Moreover, the method of selecting wavelet bases in synthesizing seismic wave and the influence of the damping ratio on synthesizing results are analyzed. The results show that the synthesis seismic waves using wavelet bases can represent the characteristics of the seismic wave as well as the ground characteristic period, and have good time-frequency non-stationary. 相似文献
7.
选取内蒙古中部地区定点形变观测中受降雨、大风、气压干扰以及地震波影响的典型数据，采用S变换，对该地区形变观测中4种主要干扰信号的时频响应特征进行分析与讨论。结果表明，降雨干扰信号主要集中在低频区域，其频率先增大后减小；大风干扰表现为高频干扰，时频域能量强度与观测曲线受风扰影响变化幅度成正比；气压干扰信号的优势频率分布在低频段内；地震波影响中VP垂直摆和JCZ地震计记录的地震波较为相似，但VP垂直摆记录的频段要小于JCZ地震计，VP垂直摆主要记录的是低频地震波。同时，4种干扰信号的时频域频率、能量强度随时间变化趋势与数据观测时域变化趋势相一致。 相似文献
8.
本文通过端点效应压制的Hilbert-Huang变换, 对大同及沁源台布置的四分量钻孔应变仪记录的印尼8.6级地震激发的应变地震波形进行时频分析, 结果显示印尼8.6级地震的主震和8.2级余震的应变地震波序列各个震相具有不同的时频特征: ① 地震波到达之前的所谓“环境噪声”部分, 瞬时频率低, 瞬时振幅小; ② P波初至时, 高频成分突然增加, 振幅也随即增强; ③ S波到达时, 频率有所降低而振幅剧烈上升; ④ 面波到达时, 振幅进一步剧烈上升达到整个序列的极大值; ⑤ 尾波部分振幅逐渐降低, 但与噪声部分相比频率依然偏高, 振幅依然偏大。 本文也将应变地震波与地震仪记录的地震波进行对比, 虽然应变地震波与地震波波形和Fourier谱具有极高的相关系数, 但从Hilbert-Huang变换得到的边际谱上看, 应变地震波与地震波有显著的区别, 应变地震波比地震波记录的低频成分相对更多。 通过Hilbert谱, 有助于更好地了解非平稳信号的局部特征, 对于突变信号的地震波, Hilbert-Huang变换是一个较好的时频分析工具。 相似文献
9.
为了检测定向裂隙介质中横波分裂的方位属性特征,分析地震属性随裂隙密度和方位变化,采用人工吸收边界和反周期扩展边界,用伪谱法获得不同裂隙密度和不同方位地质模型三分量地面记录;应用时频分析和剪切波偏振分析研究由于裂隙方位和密度引起的横波分裂.结果显示,裂隙密度和方位决定着横波分裂的时差和偏振.快慢横波的延迟时间随裂隙密度增大而增加,不同方位相同裂隙密度的横波分裂时差有微小的变化.在45°方位检测时间延迟时间最大.通过时频分析,可以看到不同方位的瞬时主频有显著的变化,在横波分裂处瞬时主频有明显变化.因此,瞬时主频和快横波的偏振以及延迟时间可以作为裂隙方位和密度的指示. 相似文献
10.
同步挤压S变换是一种处理非平稳信号的新时频变换方法,通过"挤压"信号的S变换结果,可以得到高分辨率的时频谱.但是,当信号的相位随时间呈非线性变化时,同步挤压S变换计算出的瞬时频率会出现误差,并造成时频谱分辨率降低.为了改善其对于该类信号的时频分析效果,我们利用时间和频率的二阶偏导数对瞬时频率计算式进行修正,提出二阶同步挤压S变换.合成信号处理结果表明,二阶同步挤压S变换的分辨率不但明显高于常用时频变换,在信号瞬时频率随时间呈二次或正弦变化的情况下,其时频挤压效果也好于同步挤压S变换.我们将二阶同步挤压S变换应用到天然气地震勘探资料的谱分解当中,结果表明,二阶同步挤压S变换可以很好地检测到与天然气相关的谱异常.因此,二阶同步挤压变换对于地震解释是一种很有潜力的方法. 相似文献
11.
传统的傅里叶变换因缺乏信号局域性的信息,无法对地震波等非平稳信号进行全面描述,时频分析通常是分析非平稳信号较好的工具.本文利用大柴旦地震台记录到的2013年6月5日青海海西5.0级地震波形,采用赵-阿特拉斯-马克时频分布（ZAM）分别研究了该地震P波、S波段的时间-频率特征.研究结果很好地解释了地震波的非平稳性,较全面地展示了地震波的衰减特征. 相似文献
12.
The ground roll and body wave usually show significant differences in arrival time, frequency content, and polarization characteristics, and conventional polarization filters that operate in either the time or frequency domain cannot consider all these elements. Therefore, we have developed a time-frequency dependent polarization filter based on the S transform to attenuate the ground roll in seismic records. Our approach adopts the complex coefficients of the S transform of the multi-component seismic data to estimate the local polarization attributes and utilizes the estimated attributes to construct the filter function. In this study, we select the S transform to design this polarization filter because its scalable window length can ensure the same number of cycles of a Fourier sinusoid, thereby rendering more precise estimation of local polarization attributes. The results of applying our approach in synthetic and real data examples demonstrate that the proposed polarization filter can effectively attenuate the ground roll and successfully preserve the body wave. 相似文献
13.
本文给出了地震记录变子波模型的一种近似数学表达式．基于该表达式研究了反射系数序列不满足白噪假设和子波在地下传播时发生变化这两种情况下地震道谱的组成及结构,讨论了谱白化及反褶积方法在这两种情况下效果不佳的原因．然后基于变子波模型,提出了一种新的提高地震记录分辨率的方法：第一步,用自适应于地震记录的Gabor分子窗把地震记录恰当地划分成若干片断,每段内信号近似平稳,然后将地震记录变换到时间-频率域;第二步,在变换域对每个分子窗内信号的振幅谱进行处理以拓宽频带;最后把处理后的时间-频率域函数反变换回时间域得到提高分辨率后的结果．本文提出的方法具有能较好地适用于反射系数不满足白噪假设的情况及提高分辨率后的地震记录能较好地保持原地震记录的相对能量关系等优点,模型和实际资料算例结果均表明,本文方法在拓宽地震资料频带及保持地震记录局部能量相对关系方面均明显优于谱白化方法． 相似文献
14.
Ground roll waves interfere with seismic data. The suppression of ground roll waves based on the division of wavelet frequencies considers the low-frequency characteristics of ground roll waves. However, this method will not be effective when the ground roll wave and the effective signal have the same frequency bands because of overlapping. The radial trace transform (RTT) considers the apparent velocity difference between the effective signal and the ground roll wave to suppress the latter, but affects the low-frequency components of the former. This study proposes a ground roll wave suppression method by combining the wavelet frequency division and the RTT based on the difference between the ground roll wave velocity and the effective signal and their energy difference in the wavelet domain, thus making full use of the advantages of both methods. First, we decompose the seismic data into different frequency bands through wavelet transform. Second, the RTT and low-cut filtering are applied to the low-frequency band, where the ground roll waves are appearing. Third, we reconstruct the seismic record without ground roll waves by using the inverse RTT and the remaining frequency bands. The proposed method not only improves the ground roll wave suppression, but also protects the signal integrity. The numerical simulation and real seismic data processing results suggest that the proposed method has a strong ability to denoise while preserving the amplitude. 相似文献
15.
复地震道分析又称三瞬分析,该分析方法可将反映地震信号局部变化情况的地震波的瞬时振幅、瞬时相位和瞬时频率等信息分离开.本文应用Hilbert变换求解虚地震记录,用复地震道分析方法求取"三瞬"信息,并用该方法计算了理论合成地震记录的瞬时振幅、瞬时相位和瞬时频率,获得了较好的效果.同时,本文也利用该方法对某区块实际地震资料进行了处理,结果表明,复地震道分析方法获得的"三瞬"信息可反映地震信号的局部变化,有助于进行地震薄互层分析,并能提高数据的解释精度. 相似文献
16.
Dispersion analysis is an important part of in-seam seismic data processing, and the calculation accuracy of the dispersion curve directly influences pickup errors of channel wave travel time. To extract an accurate channel wave dispersion curve from in-seam seismic two-component signals, we proposed a time–frequency analysis method based on single-trace signal processing; in addition, we formulated a dispersion calculation equation, based on S-transform, with a freely adjusted filter window width. To unify the azimuth of seismic wave propagation received by a two-component geophone, the original in-seam seismic data undergoes coordinate rotation. The rotation angle can be calculated based on P-wave characteristics, with high energy in the wave propagation direction and weak energy in the vertical direction. With this angle acquisition, a two-component signal can be converted to horizontal and vertical directions. Because Love channel waves have a particle vibration track perpendicular to the wave propagation direction, the signal in the horizontal and vertical directions is mainly Love channel waves. More accurate dispersion characters of Love channel waves can be extracted after the coordinate rotation of two-component signals. 相似文献
17.
深地震反射原始单炮数据是非平稳的弱能量反射信号,信噪比较低.如何提高信噪比一直是深地震反射数据前处理中的一大难题.S变换是一种适用于分析非平稳信号的时频变换方法.同其他分析时变信号的方法相比,S变换的基本小波不必满足小波在时间域均值为零的容许性条件,它的时频分辨率与分析信号的频率有关,且其在时间域的积分可以得到傅里叶频谱,其反变换也简单.因此,S变换容易表示深地震反射信号复杂的时频特性.本文在S变换的基础上,利用软阈值滤波方法对深地震反射数据进行处理,实验结果表明,该方法有效地提高了信噪比,压制了有效频带范围内的混频干扰,突出了弱反射信号,使得波组信息更加丰富,有利于连续追踪有效反射波组和识别薄地层,特别是提高了深部Moho界面反射层位的分辨率,为深地震反射剖面后续处理和准确解释奠定了基础. 相似文献
18.
谱图重排的谱分解理论及其在储层探测中的应用 总被引：1，自引：0，他引：1
谱分解理论是把单道地震记录分解为连续的时频谱平面,是地震资料处理和解释的重要技术之一.由于谱分解方法的多解性,所以同一道地震记录因为分解方法不同,得到的时频谱是不一样的.短时傅里叶变换,小波变换,S变换和匹配追踪算法都是对信号开窗分析,这些方法都受到不确定性原理的限制.Wigner-Ville变换避开了不确定性原理的限制,但是交叉项的存在限制了本方法的使用.本文利用谱图重排的时频分析方法(RSPWV)对合成的单道地震记录和实际的地震资料进行了分析.与短时傅里叶变换和匹配追踪算法的比较得出:此方法具有较高的时频分辨率,能够很好地识别气层. 相似文献
19.
J. L. MARI 《Geophysical Prospecting》1989,37(3):257-277
Seismic attenuation introduces modifications in the wavelet shape in vertical seismic profiles. These modifications can be quantified by measuring particular signal attributes such as rise-time, period and shape index. Use of signal attributes leads to estimations of a seismic-attenuation log (Q-log). To obtain accurate signal attributes it is important to minimize noise influence and eliminate local interference between upgoing and downgoing waves at each probe location. When tube waves are present it is necessary to eliminate them before performing separation of upgoing and downgoing events. We used a trace-by-trace Wiener filter to minimize the influence of tube waves. The separation of upgoing and downgoing waves was then performed in the frequency domain using a trace-pair filter. We used three possible methods based on signal attribute measurements to obtain g-log from the extracted downgoing wavefield. The first one uses a minimum phasing filter and the arrival time of the first extremum. The two other methods determine the Q-factor from simple relations between the amplitudes of the first extrema and the pseudo-periods of the down-going wavelet. The relations determined between a signal attribute and traveltime over quality factor were then calibrated using field source signature and constant-Q models computed by Ganley's method. Q-logs thus obtained from real data are discussed and compared with geological information, specifically at reservoir level. Analysis of the tube wave arrivals at the level of the reservoir showed a tube wave attenuation that could not be explained by simple transmission effects. There was also a loss of signal coherence. This could be interpreted as tube wave diffusion in the porous reservoir, followed by dispersion. If this interpretation can be verified, tube wave analysis could lead to further characterization of porous permeable zones. 相似文献
20.
The optimal fractional Gabor transform based on the adaptive window function and its application 总被引：1，自引：0，他引：1
We designed the window function of the optimal Gabor transform based on the time-frequency rotation property of the fractional Fourier transform. Thus, we obtained the adaptive optimal Gabor transform in the fractional domain and improved the time-frequency concentration of the Gabor transform. The algorithm first searches for the optimal rotation factor, then performs the p-th FrFT of the signal and, finally, performs time and frequency analysis of the FrFT result. Finally, the algorithm rotates the plane in the fractional domain back to the normal time-frequency plane. This promotes the application of FrFT in the field of high-resolution reservoir prediction. Additionally, we proposed an adaptive search method for the optimal rotation factor using the Parseval principle in the fractional domain, which simplifies the algorithm. We carried out spectrum decomposition of the seismic signal, which showed that the instantaneous frequency slices obtained by the proposed algorithm are superior to the ones obtained by the traditional Gabor transform. The adaptive time frequency analysis is of great significance to seismic signal processing. 相似文献