共查询到20条相似文献，搜索用时 234 毫秒
1.
混合震源采集技术相对于传统的地震数据采集,在极大提高采集效率的同时引入了混叠噪声,很大程度上影响了成像结果的精度.二维混采数据中,我们通常利用混叠噪声在非共炮域呈非相干分布这一特点来压制混叠噪声,从而实现混合震源数据分离.相对于二维混采数据,三维混采数据具有数据量巨大,构建混合震源算子困难,混合度的增加引入了高强度混叠噪声的特点.针对上述问题,本文采用稀疏约束反演方法在Radon域实现混采数据分离,混叠噪声强度比较大的情况下,稀疏约束反演方法能够得到更高精度的分离结果;利用震源激发的GPS时间通过长记录的方式在共接收点道集对上一次迭代分离结果做混合、伪分离,实现了单个共接收点道集自身混合、伪分离,避免了对整个数据做运算,同时不需要构建混合震源算子.通过模拟数据和实际数据计算来验证上述方法的适用性. 相似文献
2.
为在去除多次波时有效保护地震一次反射波数据的AVO现象,给后续反演、解释提供准确的地震数据,本文提出了一种基于保幅拉东变换的多次波衰减方法,该方法是对常规抛物拉东变换的修改,把常规的稀疏拉东变换在拉东域分成两部分：一部分用于模拟零偏移距处的反射波能量,增加的另一部分用于模拟反射波振幅的AVO特性.该方法不仅考虑了反射波同相轴的形状,还考虑了反射波同相轴振幅幅度的变化,从而可把反射波信息进行有效转换,进而有利于多次波的消除,更好地恢复有效波的能量.在把地震数据由时间域转换到拉东域时,本文采用了IRLS算法实现保幅拉东算子的反演.模型数据和实际地震道集的试算分析表明,与常规拉东变换相比,保幅拉东变换在去除多次波的同时可有效保护一次反射波的AVO现象. 相似文献
3.
Conventional time-space domain and frequency-space domain prediction filtering methods assume that seismic data consists of two parts, signal and random noise. That is, the so-called additive noise model. However, when estimating random noise, it is assumed that random noise can be predicted from the seismic data by convolving with a prediction error filter. That is, the source-noise model. Model inconsistencies, before and after denoising, compromise the noise attenuation and signal-preservation performances of prediction filtering methods. Therefore, this study presents an inversion-based time-space domain random noise attenuation method to overcome the model inconsistencies. In this method, a prediction error filter (PEF), is first estimated from seismic data; the filter characterizes the predictability of the seismic data and adaptively describes the seismic data’s space structure. After calculating PEF, it can be applied as a regularized constraint in the inversion process for seismic signal from noisy data. Unlike conventional random noise attenuation methods, the proposed method solves a seismic data inversion problem using regularization constraint; this overcomes the model inconsistency of the prediction filtering method. The proposed method was tested on both synthetic and real seismic data, and results from the prediction filtering method and the proposed method are compared. The testing demonstrated that the proposed method suppresses noise effectively and provides better signal-preservation performance. 相似文献
4.
Woodon Jeong Constantinos Tsingas Mohammed S. Almubarak 《Geophysical Prospecting》2020,68(5):1523-1539
A number of deblending methods and workflows have been reported in the past decades to eliminate the source interference noise recorded during a simultaneous shooting acquisition. It is common that denoising algorithms focusing on optimizing coherency and weighting down/ignoring outliers can be considered as deblending tools. Such algorithms are not only enforcing coherency but also handling outliers either explicitly or implicitly. In this paper, we present a novel approach based on detecting amplitude outliers and its application on deblending based on a local outlier factor that assigns an outlier-ness (i.e. a degree of being an outlier) to each sample of the data. A local outlier factor algorithm quantifies outlier-ness for an object in a data set based on the degree of isolation compared with its locally neighbouring objects. Assuming that the seismic pre-stack data acquired by simultaneous shooting are composed of a set of non-outliers and outliers, the local outlier factor algorithm evaluates the outlier-ness of each object. Therefore, we can separate the data set into blending noise (i.e. outlier) and signal (i.e. non-outlier) components. By applying a proper threshold, objects having high local outlier factors are labelled as outlier/blending noise, and the corresponding data sample could be replaced by zero or a statistically adequate value. Beginning with an explanation of parameter definitions and properties of local outlier factor, we investigate the feasibility of a local outlier factor application on seismic deblending by analysing the parameters of local outlier factor and suggesting specific deblending strategies. Field data examples recorded during simultaneous shooting acquisition show that the local outlier factor algorithm combined with a thresholding can detect and attenuate blending noise. Although the local outlier factor application on deblending shows a few shortcomings, it is consequently noted that the local outlier factor application in this paper obviously achieves benefits in terms of detecting and attenuating blending noise and paves the way for further geophysical applications. 相似文献
5.
Woodon Jeong Constantinos Tsingas Mohammed S. Almubarak 《Geophysical Prospecting》2020,68(6):1742-1757
We propose a workflow of deblending methodology comprised of rank-reduction filtering followed by a signal enhancing process. This methodology can be used to preserve coherent subsurface reflections and at the same time to remove incoherent and interference noise. In pseudo-deblended data, the blending noise exhibits coherent events, whereas in any other data domain (i.e. common receiver, common midpoint and common offset), it appears incoherent and is regarded as an outlier. In order to perform signal deblending, a robust implementation of rank-reduction filtering is employed to eliminate the blending noise and is referred to as a joint sparse and low-rank approximation. Deblending via rank-reduction filtering gives a reasonable result with a sufficient signal-to-noise ratio. However, for land data acquired using unconstrained simultaneous shooting, rank-reduction–based deblending applications alone do not completely attenuate the interference noise. A considerable amount of signal leakage is observed in the residual component, which can affect further data processing and analyses. In this study, we propose a deblending workflow via a rank-reduction filter followed by post-processing steps comprising a nonlinear masking filter and a local orthogonalization weight application. Although each application shows a few footprints of leaked signal energy, the proposed combined workflow restores the signal energy from the residual component achieving significantly signal-to-noise ratio enhancement. These hierarchical schemes are applied on land simultaneous shooting acquisition data sets and produced cleaner and reliable deblended data ready for further data processing. 相似文献
6.
Imaging using dipole acoustic logging reflections has become a research topic of increasing interest in recent years. Extracting reflections from the whole waveform is both important and extremely difficult because the reflections are obscured by large‐amplitude direct waves. A method of wavefield separation based on high‐resolution Radon transforms has been applied to separate the reflected waves. First, an analysis of the common offset gathers shows that the linear Radon transform can be used to separate the direct and reflected wave fields. However, traditional linear Radon transforms cannot focus the wave event using the least squares method. An improved high‐resolution linear Radon transform is achieved using the principles of maximum entropy and Bayesian methods based on previous studies. The separation method is tested using synthetic data for hard and soft formations, a void model, and a fault model. The high‐resolution Radon transform method is used to process a field dataset and exhibits improved results compared with those of the standard method. 相似文献
7.
多次波偏移中的假象主要来自于不同地震事件之间的互相关,由于这种互相关满足成像条件,很难直接在偏移过程中去除.但是对于准确的速度模型,真实的成像结果在角度域内应该是平直的.根据这个判断准则,可以在角度域内移除多次波偏移中的假象.本文以数据自相关偏移为例,提出了在单程波多次波偏移中移除假象的主要流程:首先在在单程波偏移过程中高效地提取角度域共成像点道集,然后对角度域共成像点道集应用高分辨率的抛物线型Radon变换,用合适的切除函数处理后,反变换回到角度域,最后叠加各个角度成分,得到偏移结果.Marmousi模型的合成数据测试表明,这种方法可以很好地压制多次波偏移过程中产生的假象,有效地提高成像结果的信噪比. 相似文献
8.
This paper reviews the fundamentals of Radon-based methods using examples from global seismic applications. By exploiting the move-out or curvature of signal of interest, Least-squares and High-resolution Radon transform methods can effectively eliminate random or correlated noise, enhance signal clarity, and simultaneously constrain travel time and ray angles. The inverse formulation of the Radon transform has the added benefits of phase isolation and spatial interpolation during data reconstruction. This study presents a ‘cookbook’ for Radon-based methods in analyzing shear wave bottom-side reflections from mantle interfaces, also know as SS precursors. We demonstrate that accurate and flexible joint Radon- and frequency-domain approaches are particularly effective in resolving the presence and depth of known and postulated mantle reflectors. 相似文献
9.
地震数据本质上是时变的,不仅有效同相轴表现出确定性信号的时变特征,而且复杂地表和构造条件以及深部探测环境总是引入时变的非平稳随机噪声.标准的频率-空间域预测滤波只适合压制平面波信号假设下的平稳随机噪声,而处理非平稳地震随机噪声时,需要将数据体分割为小窗口进行分析,但效果不够理想,而传统非预测类随机噪声压制方法往往适应性不高,因此开发能够保护地震信号时变特征的随机噪声压制方法具有重要的工业价值.压缩感知是近年出现的一个新的采样理论,通过开发信号的稀疏特性,已经在地震数据处理中的数据插值以及噪声压制中得到了应用.本文系统地分析了压缩感知理论框架下的地震随机噪声压制问题,建立了阈值消噪的数学反演目标函数;针对时变有效信息具有的可压缩性,利用有限差分算法求解炮检距连续方程,构建有限差分炮检距连续预测算子(FDOC),在seislet变换框架下,提出一种新的快速稀疏变换域———FDOC-seislet变换,实现地震数据的高度稀疏表征;结合非平稳随机噪声不可压缩的特征,提出了一种整形迭代消噪方法,该方法是一种广义的迭代收缩阈值(IST)算法,在无法计算稀疏变换伴随算子的条件下,仍然能够对强噪声环境中的时变有效信息进行有效恢复.通过对模型数据和实际数据的处理,验证了FDOC-seislet稀疏变换域随机噪声迭代压制方法能够在保护复杂构造地震波信息的前提下,有效地衰减原始数据中的强振幅随机噪声干扰. 相似文献
10.
人工地震数据总是受到随机噪声的干扰,地震数据时-空变的特性使得常规去噪方法处理效果并不理想,容易导致有效信号的损失.目前广泛应用的预测滤波类方法存在处理时变数据能力不足的问题.随着压缩感知理论的不断完善,稀疏变换阈值算法能够解决时变地震数据噪声压制问题,但是常规的稀疏变换方法,如傅里叶变换,小波变换等,并不是特殊针对地震数据设计的,很难提供地震数据最佳的压缩特征,同时,常规阈值算法容易导致去噪结果过于平滑.因此开发更加有效的时-空变地震数据信噪分离方法具有重要的工业价值.本文将地震数据信噪分离问题归纳为数学基追踪问题,在压缩感知理论框架下,利用特殊针对地震数据设计的VD-seislet稀疏变换方法,结合全变差(TV)算法,构建seislet-TV双正则化条件,并利用分裂Bregman迭代算法求解约束最优化问题,实现地震数据的有效信噪分离.通过理论模型和实际数据测试本文方法,并且与工业标准FXdecon方法进行比较,结果表明基于seislet-TV双正则化约束条件的迭代方法能够更加有效地保护时-空变地震信号,压制地震数据中的强随机噪声. 相似文献
11.
Passive seismic has recently attracted a great deal of attention because non‐artificial source is used in subsurface imaging. The utilization of passive source is low cost compared with artificial‐source exploration. In general, constructing virtual shot gathers by using cross‐correlation is a preliminary step in passive seismic data processing, which provides the basis for applying conventional seismic processing methods. However, the subsurface structure is not uniformly illuminated by passive sources, which leads to that the ray path of passive seismic does not fit the hyperbolic hypothesis. Thereby, travel time is incorrect in the virtual shot gathers. Besides, the cross‐correlation results are contaminated by incoherent noise since the passive sources are always natural. Such noise is kinematically similar to seismic events and challenging to be attenuated, which will inevitably reduce the accuracy in the subsequent process. Although primary estimation for transient‐source seismic data has already been proposed, it is not feasible to noise‐source seismic data due to the incoherent noise. To overcome the above problems, we proposed to combine focal transform and local similarity into a highly integrated operator and then added it into the closed‐loop surface‐related multiple elimination based on the 3D L1‐norm sparse inversion framework. Results proved that the method was capable of reliably estimating noise‐free primaries and correcting travel time at far offsets for a foresaid virtual shot gathers in a simultaneous closed‐loop inversion manner. 相似文献
12.
地震资料去噪，无论是叠前还是叠后，都是处理中非常重要的内容.随着勘探技术的进步，地球物理界积累和开发的去噪软件已越来越多.对各种去噪方法进行分门别类，阐述其基本原理、物理意义、适用条件、发展前景，既有理论价值又有实际指导意义.本文从噪声的特征出发，首先对地震资料噪声进行了分类；然后综合评述了目前实际生产中常用的几种去噪方法，包括频率域滤波、频率波数域滤波、频率空间域滤波、Radon变换、聚束滤波、基于小波分解和重建的去噪方法等；最后还简述了去噪技术的应用及发展情况. 相似文献
13.
地震资料去噪，无论是叠前还是叠后，都是处理中非常重要的内容.随着勘探技术的进步，地球物理界积累和开发的去噪软件已越来越多.对各种去噪方法进行分门别类，阐述其基本原理、物理意义、适用条件、发展前景，既有理论价值又有实际指导意义.本文从噪声的特征出发，首先对地震资料噪声进行了分类；然后综合评述了目前实际生产中常用的几种去噪方法，包括频率域滤波、频率波数域滤波、频率空间域滤波、Radon变换、聚束滤波、基于小波分解和重建的去噪方法等；最后还简述了去噪技术的应用及发展情况. 相似文献
14.
本文针对井间和3D VSP波场的线性特征,研究井孔地震波场线性高分辨率Radon变换算子,用于井孔地震波场分析与纵横波分离.在Radon变换原理分析基础上,采用基于柯西分布的高分辨率线性Radon变换对井孔数据进行Radon变换,其间通过对离散倾角叠加算子求取的研究,及对影响Radon能量收敛的重要参数阻尼因子算法的改进,使数据在Radon域以能量团的形式呈现,得到很好的收敛效果,基本解决了Radon域数据的一定程度的拖尾现象,消除了各能量团之间的平滑效应,采用柯西分布来规则化数据,提高了Radon域的分辨率,Radon域能量也收敛到一个点上,有利于上下行波或纵横波波场分离.最后通过反演结果和模型试算验证了该方法的可行性和稳定性. 相似文献
15.
Apex shift hyperbolic Radon transform (ASHRT) is an extension of hyperbolic Radon transform (HRT). We have developed a novel sparsity-promoting framework for ASHRT by employing curvelet transform (CT) in the sparse inversion. RT-based seismic data processing can be considered as an optimization problem and a mixed norms inversion, therefore, objective function with CT can promote the sparsity of the transformed domain, which makes the sparse inversion more efficient. Compared with the conventional sparse inversion of ASHRT, the proposed method weights the sparse penalization, which indicates a sparser solution of ASHRT. We use synthetic and field data examples to demonstrate the performance of ASHRT. Compared to the conventional solution, the ours may lead to more accurately reconstructed results and have a better noise immunity. 相似文献
16.
Tomohide Ishiyama Mohammed Y. Ali Satoshi Ishikawa Gerrit Blacquiere Shotaro Nakayama 《Geophysical Prospecting》2019,67(7):1852-1866
We introduce a concept of generalized blending and deblending, develop its models and accordingly establish a method of deblended-data reconstruction using these models. The generalized models can handle real situations by including random encoding into the generalized operators both in the space and time domain, and both at the source and receiver side. We consider an iterative optimization scheme using a closed-loop approach with the generalized blending and deblending models, in which the former works for the forward modelling and the latter for the inverse modelling in the closed loop. We applied our method to existing real data acquired in Abu Dhabi. The results show that our method succeeded to fully reconstruct deblended data even from the fully generalized, thus quite complicated blended data. We discuss the complexity of blending properties on the deblending performance. In addition, we discuss the applicability to time-lapse seismic monitoring as it ensures high repeatability of the surveys. Conclusively, we should acquire blended data and reconstruct deblended data without serious problems but with the benefit of blended acquisition. 相似文献
17.
Within the field of seismic data acquisition with active sources, the technique of acquiring simultaneous data, also known as blended data, offers operational advantages. The preferred processing of blended data starts with a step of deblending, that is separation of the data acquired by the different sources, to produce data that mimic data from a conventional seismic acquisition and can be effectively processed by standard methods. Recently, deep learning methods based on the deep neural network have been applied to the deblending task with promising results, in particular using an iterative approach. We propose an enhancement to deblending with an iterative deep neural network, whereby we modify the training stage of the deep neural network in order to achieve better performance through the iterations. We refer to the method that only uses the blended data as the input data as the general training method. Our new multi-data training method allows the deep neural network to be trained by the data set with the input patches composed of blended data, noisy data with low amplitude crosstalk noise, and unblended data, which can improve the ability of the deep neural network to remove crosstalk noise and protect weak signal. Based on such an extended training data set, the multi-data training method embedded in the iterative separation framework can result in different outputs at different iterations and converge to the best result in a shorter iteration number. Transfer learning can further improve the generalization and separation efficacy of our proposed method to deblend the simultaneous-source data. Our proposed method is tested on two synthetic data and two field data to prove the effectiveness and superiority in the deblending of the simultaneous-source data compared with the general training method, generic noise attenuation network and low-rank matrix factorization methods. 相似文献
18.
在地震勘探领域,随机噪声一直是影响地震信号信噪比的主要因素之一,如何从被干扰的地震信号中有效去除随机噪声并保护有用信号具有重要的意义.针对经典小波变换在计算效率方面的缺陷,本文推荐应用提升算法实现第二代小波变换的构建,分析和对比了提升算法(Lifting Scheme)下不同小波变换方法的特性,选取更加符合小波域去噪原理的CDF 9/7双正交小波变换作为基本算法,同时应用了简单、有效的百分位数(Percentiles)软阈值进行信噪分离.通过理论模型处理,本方法可以在去噪能力和保护有用信号之间找到很好的平衡点.实际剖面的处理效果表明,此方法不仅能有效的滤除随机噪声,而且很好地保护有用信号,提高地震数据分析的精确性. 相似文献
19.
Multi-source seismic technology is an efficient seismic acquisition method that requires a group of blended seismic data to be separated into single-source seismic data for subsequent processing. The separation of blended seismic data is a linear inverse problem. According to the relationship between the shooting number and the simultaneous source number of the acquisition system, this separation of blended seismic data is divided into an easily determined or overdetermined linear inverse problem and an underdetermined linear inverse problem that is difficult to solve. For the latter, this paper presents an optimization method that imposes the sparsity constraint on wavefields to construct the object function of inversion, and the problem is solved by using the iterative thresholding method. For the most extremely underdetermined separation problem with single-shooting and multiple sources, this paper presents a method of pseudo-deblending with random noise filtering. In this method, approximate common shot gathers are received through the pseudo-deblending process, and the random noises that appear when the approximate common shot gathers are sorted into common receiver gathers are eliminated through filtering methods. The separation methods proposed in this paper are applied to three types of numerical simulation data, including pure data without noise, data with random noise, and data with linear regular noise to obtain satisfactory results. The noise suppression effects of these methods are sufficient, particularly with single-shooting blended seismic data, which verifies the effectiveness of the proposed methods. 相似文献
20.
The hyperbolic Radon transform has a long history of applications in seismic data processing because of its ability to focus/sparsify the data in the transform domain. Recently, deconvolutive Radon transform has also been proposed with an improved time resolution which provides improved processing results. The basis functions of the (deconvolutive) Radon transform, however, are time-variant, making the classical Fourier based algorithms ineffective to carry out the required computations. A direct implementation of the associated summations in the time–space domain is also computationally expensive, thus limiting the application of the transform on large data sets. In this paper, we present a new method for fast computation of the hyperbolic (deconvolutive) Radon transform. The method is based on the recently proposed generalized Fourier slice theorem which establishes an analytic expression between the Fourier transforms associated with the data and Radon plane. This allows very fast computations of the forward and inverse transforms simply using fast Fourier transform and interpolation procedures. These canonical transforms are used within an efficient iterative method for sparse solution of (deconvolutive) Radon transform. Numerical examples from synthetic and field seismic data confirm high performance of the proposed fast algorithm for filling in the large gaps in seismic data, separating primaries from multiple reflections, and performing high-quality stretch-free stacking. 相似文献