共查询到18条相似文献，搜索用时 93 毫秒
1.
高强钢组合K型偏心支撑框架耗能梁段和支撑采用Q345钢,其余构件采用Q460钢,不仅能有效减小构件截面、节约钢材、降低造价,而且有助于推广高强钢的应用。为了比较高强钢组合K型偏心支撑框架与Q345钢K型偏心支撑框架的抗震性能,在试验研究的基础上,设计两组共8个不同层数的高强钢组合K型偏心支撑框架与Q345钢K型偏心支撑框架,并分别对其进行非线性静力推覆分析和动力时程分析,对比分析两种结构形式的承载力、刚度、延性以及地震作用下层间变形能力和耗能梁段。结果表明:在满足抗震性能要求的前提下,相同设计条件下高强钢组合K型偏心支撑框架变形略差于Q345钢K型偏心支撑框架,但是其构件截面较小,可以节省钢材,降低工程造价,具有较高的经济效益。 相似文献
2.
K形高强钢组合偏心支撑(K-HSS-EBF)是指耗能连梁和支撑采用Q345钢,而框架梁、框架柱采用高强度钢(如Q460)。为研究其在罕遇地震作用下的抗震性能,在试验研究的基础上,采用直接基于位移的抗震设计方法设计了5层、8层和12层算例,分别进行静力推覆分析和动力弹塑性分析,研究高强钢组合偏心支撑钢框架在罕遇地震作用下层间侧移分布和破坏模式。研究结果表明:直接基于位移的抗震设计方法设计的算例在罕遇地震作用下,结构的层间侧移满足我国现行抗震规范的要求,结构呈理想的渐进式梁铰屈服机构,并证明该设计方法的合理性和可靠性。 相似文献
3.
《地震工程与工程振动》2015,(4)
高强钢组合K形偏心支撑钢框架通过低屈服点耗能梁段的弹塑性变形耗散能量,结构破坏主要集中于此,可通过更换耗能梁段完成结构修复。为研究替换构件法修复这种结构的可行性和修复后结构的抗震性能,先对1榀单层单跨1/2缩尺的高强钢组合K形偏心支撑钢框架进行循环加载试验;将已加载破坏的试件进行更换耗能梁段修复,再对修复后的试件进行循环加载试验。试件破坏模式和主要抗震性能指标的分析结果表明:采用替换耗能梁段法修复这种结构是可行的,且修复工作量小,有利于尽快恢复正常;修复后的极限承载力与原试件相当,但延性系数略有降低;相同层间位移角下二者耗散能量差别不大,但修复后的耗能梁段转动能力不及原试件。 相似文献
4.
耗能段腹板高厚比对Y型偏心支撑钢框架滞回性能影响的试验研究 总被引：1，自引：0，他引：1
Y型偏心支撑钢框架是偏心支撑结构中抗震耗能的结构形式之一,为了研究Y型偏心支撑钢框架中耗能梁段腹板高厚比对结构滞回性能的影响,进行了2榀1/3缩尺Y型偏心支撑钢框架的低周反复荷载试验.本文主要介绍了试验过程,分析了Y型偏心支撑钢框架在循环荷载作用下的破坏机理、滞回性能、延性、刚度退化规律以及耗能能力.试验结果表明:Y型偏心支撑钢框架延性好、耗能能力强,耗能梁段腹板高厚比的改变对Y型偏心支撑钢框架强度、刚度以及耗能能力具有较大的影响.耗能梁段腹板高厚比设计得合理,Y型偏心支撑钢框架侧向刚度较大,可以满足在小震或中震作用下的结构变形要求,在大震作用下提供良好的变形能力和耗散地震能量的功能. 相似文献
5.
《世界地震工程》2016,(2)
高强钢组合偏心支撑结构是梁柱采用高强钢材,耗能梁段采用普通钢材的新型结构体系。采用ABAQUS有限元软件建立了9个不同层数与钢材强度组合D型偏心支撑框架有限元模型,进行了滞回性能分析。通过与普通钢D型偏心支撑框架结构对比,表明虽然高强钢组合D型偏心支撑的滞回性能略差,但随着结构层数的增加,其延性、耗能能力与普通钢偏心支撑结构的差距逐渐减小,且具有结构承载力高和刚度退化慢的优点,适用于高层结构。同时,由于高强钢构件截面较小,可以大大减少结构用钢量,因此有较高的经济效益。综合各因素考虑,建议在设计9层至14层D型偏心支撑结构时采用高强钢,钢材宜采用Q460。 相似文献
6.
7.
8.
9.
10.
为了研究自复位中心支撑钢框架（SC-CBF）结构的抗震性能,对一四层SC-CBF结构进行了静力弹塑性分析、低周往复加载分析和动力弹塑性时程分析,并与中心支撑钢框架（CBF）结构进行对比,探究了不同GAP单元刚度和预应力筋截面积对SC-CBF结构自复位性能及抗震性能的影响规律。结果表明:与传统CBF结构相比,SC-CBF结构的抗侧能力强,地震作用下基底剪力小,卸载后的残余变形较小,具有良好的延性性能;在极罕遇地震作用下SC-CBF结构的位移响应大,耗散的能量多,层间位移角大而残余位移小,表现出良好的自复位性能和抗震性能;GAP单元刚度对预应力筋的受力性能影响较为明显,对结构的整体受力性能和延性性能影响较小,但结构的整体受力性能和延性性能受预应力筋截面积影响显著。 相似文献
11.
This paper reports findings of an experimental study conducted on replaceable links for steel eccentrically braced frames (EBFs). A replaceable link detail which is based on splicing the directly connected braces and the beam outside the link is proposed. This detail eliminates the need to use hydraulic jacks and flame cutting operations for replacement purposes. Performance of this proposed replaceable link was studied by conducting eight nearly full‐scale EBF tests under quasi‐static cyclic loading. The link length ratio, stiffening of the link, loading protocol, connection type, bolt pretension, gap size of splice connections, and demand‐to‐capacity ratios of members were considered as the prime variables. The specimens primarily showed two types of failure modes: link web fracture and fracture of the flange at the link‐to‐brace connection. No failures were observed at the splice connections indicating that the proposed replaceable link detail provides an excellent response. The inelastic rotation capacity provided by the replaceable links satisfied the requirements of the AISC Seismic Provisions for Structural Steel Buildings (AISC341–10). The overstrength factor of the links exceeded 2.0, which is larger than the value assumed for EBF links by design provisions. The high level of overstrength resulted in brace buckling in one of the specimens demonstrating the importance of overstrength factor used for EBF links. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
12.
偏心支撑结构是一种高烈度地震区高层建筑钢结构合理的抗侧力体系,本文针对目前偏心支撑结构存在的不足,提出一种新型的框架支撑形式——耗能器偏心支撑;并将该单斜杆(D型)耗能器偏心支撑与支撑斜杆上不加设耗能器的D型偏心支撑结构进行了对比试验。验证了该新型框架支撑形式不仅可以减少耗能梁段吸收的地震能量,而且可以减小耗能梁段的破坏程度,从而减少震后修复工作量;它具有很好的变形能力和足够的抗侧移能力。文中同时给出了设计方法,并提出了改进措施。 相似文献
13.
当前国家对建筑结构的抗震性能和震后功能恢复能力提出了更高要求。基于短剪切型消能梁段的受剪屈服特性和剪切扩孔型螺栓连接的受剪滑移性能,提出一种新型扩孔螺栓连接型消能梁段,可有效增大消能梁段的延性和耗能能力并同时减小消能梁段的损伤,使带扩孔螺栓连接型消能梁段的新型Y形偏心支撑结构更好地适应当前要求。采用有限元方法详细分析扩孔螺栓连接型消能梁段的滞回性能、破坏模式和耗能机理,由此得到其骨架曲线和力学模型,并阐述其力学模型的影响参数,为相应偏心支撑结构的设计和分析提供理论依据。 相似文献
14.
Timothy John Sullivan 《Bulletin of Earthquake Engineering》2013,11(6):2197-2231
This paper details a direct displacement-based design procedure for steel eccentrically braced frame (EBF) structures and gauges its performance by examining the non-linear dynamic response of a series of case study EBF structures designed using the procedure. Analytical expressions are developed for the storey drift at yield and for the storey drift capacity of EBFs, recognising that in addition to link beam deformations, the brace and column axial deformations can provide important contributions to storey drift components. Case study design results indicate that the ductility capacity of EBF systems will tend to be relatively low, despite the large local ductility capacity offered by well detailed links. In addition, it is found that while the ductility capacity of EBF systems will tend to reduce with height, this is not necessarily negative for seismic performance since the displacement capacity for taller EBF systems will tend to be large. To gauge the performance of the proposed DBD methodology, analytical models of the case study design solutions are subject to non-linear time-history analyses with a set of spectrum-compatible accelerograms. The average displacements and drifts obtained from the NLTH analyses are shown to align well with design values, confirming that the new methodology could provide an effective tool for the seismic design of EBF systems. 相似文献
15.
The paper is concerned with the seismic design of steel‐braced frames in which the braces are configured in a chevron pattern. According to EuroCode 8 (EC8), the behaviour factor q, which allows for the trade‐off between the strength and ductility, is set at 2.5 for chevron‐braced frames, while 6.5 is assigned for most ductile steel moment‐resisting frames. Strength deterioration in post‐buckling regime varies with the brace's slenderness, but EC8 adopts a unique q value irrespective of the brace slenderness. The study focuses on reevaluation of the q value adequate for the seismic design of chevron‐braced frames. The present EC8 method for the calculation of brace strength supplies significantly different elastic stiffnesses and actual strengths for different values of brace slenderness. A new method to estimate the strength of a chevron brace pair is proposed, in which the yield strength (for the brace in tension) and the post‐buckling strength (for the brace in compression) are considered. The new method ensures an identical elastic stiffness and a similar strength regardless of the brace slenderness. The advantage of the proposed method over the conventional EC8 method is demonstrated for the capacity of the proposed method to control the maximum inter‐storey drift. The q values adequate for the chevron‐braced frames are examined in reference to the maximum inter‐storey drifts sustained by most ductile moment‐resisting frames. When the proposed method is employed for strength calculation, the q value of 3.5 is found to be reasonable. It is notable that the proposed method does not require larger cross‐sections for the braces compared to the cross‐sections required for the present EC8 method. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
16.
This paper summarizes the results of an extensive study on the inelastic seismic response of X‐braced steel buildings. More than 100 regular multi‐storey tension‐compression X‐braced steel frames are subjected to an ensemble of 30 ordinary (i.e. without near fault effects) ground motions. The records are scaled to different intensities in order to drive the structures to different levels of inelastic deformation. The statistical analysis of the created response databank indicates that the number of stories, period of vibration, brace slenderness ratio and column stiffness strongly influence the amplitude and heightwise distribution of inelastic deformation. Nonlinear regression analysis is employed in order to derive simple formulae which reflect the aforementioned influences and offer a direct estimation of drift and ductility demands. The uncertainty of this estimation due to the record‐to‐record variability is discussed in detail. More specifically, given the strength (or behaviour) reduction factor, the proposed formulae provide reliable estimates of the maximum roof displacement, the maximum interstorey drift ratio and the maximum cyclic ductility of the diagonals along the height of the structure. The strength reduction factor refers to the point of the first buckling of the diagonals in the building and thus, pushover analysis and estimation of the overstrength factor are not required. This design‐oriented feature enables both the rapid seismic assessment of existing structures and the direct deformation‐controlled seismic design of new ones. A comparison of the proposed method with the procedures adopted in current seismic design codes reveals the accuracy and efficiency of the former. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
17.
Performance-based seismic design(PBSD) aims to assess structures at different damage states. Since damage can be directly associated to displacements, seismic design with consideration of displacement seems to be logical. In this study, simple formulae to estimate the peak floor displacement patterns of eccentrically braced frames(EBFs) at different performance levels subjected to earthquake ground motions are proposed. These formulae are applicable in a PBSD and especially in direct displacement-based design(DDBD). Parametric study is conducted on a group of 30 EBFs under a set of 15 far field and near field accelerograms which they scaled to different amplitudes to adapt various performance levels. The results of thousands of nonlinear dynamic analyses of EBFs have been post-processed by nonlinear regression analysis in order to recognize the major parameters that influence the peak displacement pattern of these frames. Results show that suggested displacement patterns have relatively good agreement with those acquired by an exact nonlinear dynamic analysis. 相似文献
18.
Pier Paolo Rossi 《地震工程与结构动力学》2007,36(14):2227-2248
The paper deals with the analysis of the seismic behaviour and design of tied braced frames (TBFs). The behavioural properties of TBFs are described and a comparison drawn with standard eccentrically braced frames. A design procedure is then proposed that aims to achieve optimal collapse seismic behaviour, i.e. a global collapse mechanism characterized by uniform plastic rotations of links. The procedure is based on the displacement‐based approach so as to achieve direct and efficient control of the peak ground acceleration of collapse. Applications are carried out on systems with different numbers of storeys and lengths of links to obtain confirmation of the accuracy of the design hypotheses and methodologies. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献