共查询到20条相似文献，搜索用时 109 毫秒
1.
2.
本文收集了1976—2018年发生在中国大陆及其周边地区(15°~55°N, 65°~125°E)的4303个地震震源机制解, 分析了该区震源机制解和P、 T轴空间分布特征, 并使用这些震源机制解, 反演得到了中国大陆及周边地区二维构造应力场分布。 应力场反演结果表明, 云南大部、 青藏高原大部以及华北华南大部以走滑型应力性质为主, 印度洋板块与欧亚板块的强烈碰撞控制着中国西部地区, 大量的逆断型地震集中分布在青藏高原周缘和西域活动地块的天山地区。 青藏高原内部也存在正断型地震, 且应力场方向在26°N发生了很大的变化。 位于青藏高原东构造线以南的滇缅活动块体, 最大主压应力σ1方向在大致100°E发生突变, 由以西的NNE方向偏转到NNW方向。 中国东部的东北块体到华北块体再到华南块体, 最大主压应力方向有一个从NE向逐渐转变成EW向再变化到NW向的旋转趋势。 应力场总体结果表明, 中国东部应力场主要受到太平洋板块和菲律宾板块对欧亚大陆俯冲的作用, 中国西部主要受印度板块向北碰撞欧亚大陆的影响, 块体内部相互作用、 块体与断裂带相互作用也对应力场变化产生影响。 相似文献
3.
《地球物理学进展》2017,(3)
本文使用地震资料研究了青藏高原与华南块体边界南北地震带南段的地震类型及其构造运动的区域特征.发现金沙江上游东侧与鲜水河南侧之间的正断层型地震活动区,存在南北向扩张的地震构造运动;金沙江下游东侧正断层型地震活动区存在东西向扩张的地震构造运动.在龙门山断裂及其西北相邻地震带是一个逆断层型地震活动区.其他地区多为走滑型地震.南北地震带南段东西两区域地震应力场主压应力P轴方向呈现区域性差异.南北地震带南段西部区域的应力场主压应力P轴的方向大部都沿北东-南西方向分布,这与青藏高原地区的主压应力P轴的方向分布一致.南北地震带南段东部区域的主压应力P轴的方向大部都沿北西-南东方向分布,与华南地区的应力场大致相同.南北地震带南段东、西两区主压应力P轴方向所呈现出的不连续性分布特征,表明了南北地震带南段东部区域的地震孕力场可能是另有一个北西-南东方向分布的孕震力源的应力场.它可能与台湾纵谷断层地区菲律宾海板块北西向挤压的构造应力场有关. 相似文献
4.
南北地震带区域构造应力场反演 总被引：1，自引：0，他引：1
利用区域应力张量阻尼方法，使用南北地震带及其邻近区域2009年1月—2017年8月466次ML≥3.5地震的震源机制解，及1976年1月—2017年8月GCMT公布的259次M≥4.5地震的震源机制解，反演得到研究区1.0°×1.0°网格大小区域的构造应力场。应力场空间分布特征显示，南北地震带作为青藏高原的东边界，由于所处动力环境复杂，其内部最大主应力方向具有明显的空间差异性。这种差异主要表现为:南北地震带北段最大主应力方向为NE向；南北地震带中段及周边除龙门山断裂带NE段最大主应力为NW-NNW向外，其它地段最大主应力近EW向；南北地震带中南段最大主应力方向逐渐由近EW向到NW或NE向，再到近NS向。整体而言，南北地震带及邻近区域最大主应力方向由北到南发生了顺时针旋转。川滇菱形块体内部最大主应力方向为NNW向，应力方向转换带与块体边界基本一致，其东边界以东最大主应力方向为NW向，西边界以西为NNE向。从区域构造应力场的角度分析，难以将“南北地震带”作为一个统一的地震带应用于中长期地震预测的研究与实践中。 相似文献
5.
基于CAP方法, 使用地震波形资料, 计算得到了2009年1月~2017年8月期间南北地震带及周边区域466个3.5级以上地震震源机制解。 在补充收集1976年1月~2017年8月GCMT公布的259个4.5级以上地震震源机制解的基础上, 分析了南北地震带地震震源机制解和应力特征。 震源机制空间分布显示, 不同断裂带、 块体间表现出不同的震源机制空间分布特征, 该特征与南北地震带不同段落活动构造性质基本吻合。 作为青藏高原东边界的南北地震带, 由于动力环境复杂, 其内部P轴方向具有明显的差异性。 这种差异主要表现为: 南北地震带北段P轴呈NE向分布; 龙门山断裂带及周边除NE段P轴取向为NW—NNW向外, 其他地段P轴近EW向; 川滇菱形块体内部P轴呈NNW向, 而其西边界以西呈NNE向, 东边界以东呈NW向, 应力方向转换带的与川滇菱形块体边界基本一致。 整体而言, 南北地震带及近邻P轴方向由北到南发生了顺时针转动。 相似文献
6.
本文根据1975-1984年期间发生的多个小地震的P波初动方向数据,推断了青、甘、川、滇地区平均主应力轴的方向。结果表明,该地区压应力轴（P轴）和张应力轴（T轴）方向皆水平,但其方位由北到南呈现规则转动的趋势,即主压应力轴在北部青甘地区大致取NE-SW方向,到中部川西北地区转为近E-W方向,再到南部云南地区转为NNW-SSE或近N-S方向。形成应力轴方向这样特定分布图象的原因,可用印度板块向北对青藏高原的推挤和缅甸中源地震带地区下沉物质对云南地区的拖曳作用来解释。 相似文献
7.
根据从1933年到1991年的134次中、强震的震源机制结果，对南北地震带南段的区域应力场特征进行了详细地分析．结果表明，南北地震带南段是一条浅源、走滑地震带，在它的东部和西部地区，震源机制结果的P轴和T轴呈现系统的、一致的分布．在西部地区，P轴和T轴分别位于北东-南西和北西-南东方向；在东部地区，P轴和T轴分别位于北西-南东和北东-南西方向．从整体来看，P轴的方位在空间组成一个倒V字形．东部和西部地区的边界与青藏高原和扬子块体之间的边界是一致的．大量的震源机制结果表明，从喜马拉雅碰撞带到南北地震带南段西部，从台湾东海岸碰撞带到南北地震带南段东部，P轴的方位分别呈现大体一致的分布．这说明，印度-澳大利亚板块与欧亚板块之间的相对运动所产生的构造力从喜马拉雅碰撞带一直传到南北地震带南段西部，同时，菲律宾海板块与欧亚板块之间相对运动所产生的构造力从台湾东海岸一直传到南北地震带南段东部，并分别控制了那里的应力场． 相似文献
8.
系统研究了1918～2006年间中国大陆及其周缘发生的3115个M4.6以上中、强地震的震源机制解,得到中国大陆地壳区域应力场的压应力轴和张应力轴空间分布的统计结果.探讨了大陆应力场的结构,以及周围板块运动对中国大陆应力场影响作用范围及其界线.结果表明,中国东部的华北地区受到太平洋板块向欧亚板块俯冲挤压的同时,又受到从贝加尔湖经过大华北直至琉球海沟的广阔范围内存在的方位为170°引张应力场的控制.华北地区大地震的震源机制解反映出,该区地震发生为NEE向挤压应力和NNW向张应力的共同作用结果.印度洋板块向欧亚板块的碰撞挤压运动所产生的强烈的挤压应力,控制了喜马拉雅、青藏高原、乃至延伸到天山及其以北的广大地区.在青藏高原周缘地区和中国西部的大范围内,压应力P轴水平分量位于20°~40°,形成了近北东方向的挤压应力场,大量逆断层型强震集中发生在青藏高原的南、北和西部周缘地区以及天山等地区. 本文结果表明,正断层型地震集中发生在青藏高原中部高海拔的地区.证明了青藏高原周缘区域发生南北向强烈挤压短缩的同时,中部高海拔地区存在着明显的近东西向的扩张运动.根据本文最新结果,得到了华北、华南块体之间地壳区域应力场的控制边界线,发现该分界线与大地构造、岩石圈板块构造图等有较大差异,特别是在大别及其以东地区, 该分界线向东南偏转,在沿海的温州附近转向东,最终穿过东海直至琉球海沟.台湾纵谷断层是菲律宾海板块与欧亚板块之间碰撞挤压边界,来自北西西向运动的菲律宾海板块构造应力控制了从台湾纵谷、华南块体,直到中国南北地震带南段东部地域的应力场. 地震震源机制结果还表明,南北地震带南段西侧其P轴大约为NNE方向,与青藏高原的P轴方位一致.南北地震带南段东侧其P轴大约为NWW方向,与华南块体的P轴方位一致.因此,将中〖JP2〗国大陆分成东、西两部分的南北地震带南段是印度洋板块与菲律宾海板块在中国大陆内部影响控制范围的分界线. 相似文献
9.
鄂尔多斯块体东界,是山西境内一系列盆地组成的地堑系,是我国著名的地震带之一。根据历史资料,从公元前231年到现在划成七个地震活跃期,强震由北而南迁移,多分布于盆地中部,极震区走向分成两组,相间分布,震源深度均在10-20公里。最后分析了本活跃期来地震活动的几个特点。 相似文献
10.
东构造结是印度板块和欧亚板块碰撞的奇点,历来是地学研究的热点.本文在中国及区域地震台网资料所得结果的基础上,增加了1964～2006年的ISC数据,总共349475个Pn波到时资料,着重反演了东构造结及周边地区Pn波速度结构和各向异性.结果表明该区Pn速度结构与现代构造活动存在较明显的关联：四川盆地,印度板块是构造稳定的地块而具有高速异常;藏东南和南北地震带构造活动强烈而显示低速异常,云南南部、中南半岛北部因处于缅甸弧弧后扩张区其低速异常尤为明显. Pn波各向异性表明快波方向在东构造结有一顺时针旋转的趋势：在藏东南是北东方向,然后在南北地震带先转向东南,再转向南,最后在中南半岛北部突变为近东西向. 这是因为青藏高原物质在东流的过程中,相对于东构造结和四川盆地,在藏东南和南北地震带存在强烈的简单剪切变形,而在缅甸弧后扩张区为纯剪切变形所致. SKS快波方向也有类似的旋转趋势,但在中南半岛北部附近,具有近东西向Pn快波方向的区域,比云南南部东西向SKS区域偏南3°左右,这可能是由于该地区岩石圈上部运动比下部更快的结果. 相似文献
11.
THE CENOZOIC TECTONICS AND SEISMIC ACTIVITY OF XINZHENG-TAIKANG FAULT IN THE SOUTHERN EDGE OF TAIKANG AREA 
下载免费PDF全文
下载免费PDF全文 On the basis of dividing and comparison of the Neogene strata and their bottoms revealed by 7 drill holes in Taikang area, we completed 101 seismic profiles with a total length of 4991km. Seismic data were compared and interpreted. The results indicate that Xinzheng-Taikang Fault, as a blind fault extending from Xinzheng to Taikang, which was considered as an EW striking fault from Xuchang to Taikang before, is the boundary of Taikang uplift and Zhoukou depression, controlling the sedimentation since Neogene Period. So we named the fault the Xinzheng-Taikang Fault, which is composed of two branches, mainly, the east and west branches. The west branch strikes northwest, dipping northeast with steep angles, and the fault plane extending more than 140km in length. As revealed on the seismic profiles, the eastern segment of the west branch is normal fault, while the west segment of the branch shows characteristics of strike-slip fault. The east branch trends NW-NEE, dipping SW-SSE with the length of about 50km. Two branches form a minus flower structure, indicating the strike slip-extension tectonic background. The bottom of Neogene strata is offset about 120m by the east branch, 20m by the west branch, and the bottom of Quaternary is probably offset too. Meanwhile, latest studies suggest that the composite strip of the two branches of Xinzheng-Taikang Fault, which is a tectonic transfer zone, is the subduction zone between the two strike-slip faults. The tectonic stress tends to be released by the east-west branch fault, and the zone should be the seismogenic structure for the recent seismicity in Taikang area. In 2010, the latest earthquake ofMS4.7 occurred in this area, causing 12 people wounded. The seismogenic structure was considered to be the Xinzheng-Taikang Fault. So locating the fault exactly is of great importance to disaster prevention. 相似文献
12.
本文研究了兴都库什及帕米尔地区地震的空间分布.发现h<70km的地震分布广泛,h≥100km的地震形成-S形的倾斜中源地震带.在71.5°E以西,中源地震带倾向接近正北,倾角随深度变化,在深部接近垂直,且倾角自西向东逐渐变陡,在71.5°E以东,倾向逐渐由东南变为正南. 分析了121个mb≥5.0地震的机制解.浅源地震机制解的P轴大多位于NS和NNW-SSE方向,且多近水平,反映此区受到NS或NNW-SSE方向挤压.各剖面应力轴分布规律性强,在150km以下,总的趋势是机制解的T轴接近于倾斜的中源地震带的下倾方向,而P轴倾角较小且垂直于倾斜的中源地震带的走向. 相似文献
13.
On August 8, 2017, Beijing time, an earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, Sichuan Province, with the epicenter located at 33.20°N 103.82°E. The earthquake caused 25 people dead, 525 people injured, 6 people missing and 170000 people affected. Many houses were damaged to various degrees. Up to October 15, 2017, a total of 7679 aftershocks were recorded, including 2099 earthquakes of M ≥ 1.0.
The M7.0 Jiuzhaigou earthquake occurred in the northeastern boundary belt of the Bayan Har block on the Qinghai-Tibet Plateau, where many active faults are developed, including the Tazhong Fault(the eastern segment of the East Kunlun Fault), the Minjiang fault zone, the Xueshan fault zone, the Huya fault zone, the Wenxian fault zone, the Guanggaishan-Daishan Fault, the Bailongjiang Fault, the Longriuba Fault and the Longmenshan Fault. As one of the important passages for the eastward extrusion movement of the Qinghai-Tibet Plateau(Tapponnier et al., 2001), the East Kunlun fault zone has a crucial influence on the tectonic activities of the northeastern boundary belt of Bayan Kala. Meanwhile, the Coulomb stress, fault strain and other research results show that the eastern boundary of the Bayan Har block still has a high risk of strong earthquakes in the future. So the study of the M7.0 Jiuzhaigou earthquake' seismogenic faults and stress fields is of great significance for scientific understanding of the seismogenic environment and geodynamics of the eastern boundary of Bayan Har block.
In this paper, the epicenter of the main shock and its aftershocks were relocated by the double-difference relocation method and the spatial distribution of the aftershock sequence was obtained. Then we determined the focal mechanism solutions of 24 aftershocks(M ≥ 3.0)by using the CAP algorithm with the waveform records of China Digital Seismic Network. After that, we applied the sliding fitting algorithm to invert the stress field of the earthquake area based on the previous results of the mechanism solutions. Combining with the previous research results of seismogeology in this area, we discussed the seismogenic fault structure and dynamic characteristics of the M7.0 Jiuzhaigou earthquake. Our research results indicated that:1)The epicenters of the M7.0 Jiuzhaigou earthquake sequence distribute along NW-SE in a stripe pattern with a long axis of about 35km and a short axis of about 8km, and with high inclination and dipping to the southwest, the focal depths are mainly concentrated in the range of 2~25km, gradually deepening from northwest to southeast along the fault, but the dip angle does not change remarkably on the whole fault. 2)The focal mechanism solution of the M7.0 Jiuzhaigou earthquake is:strike 151°, dip 69° and rake 12° for nodal plane Ⅰ, and 245°, 78° and -158° for nodal plane Ⅱ, the main shock type is pure strike-slip and the centroid depth of the earthquake is about 5km. Most of the focal mechanism of the aftershock sequence is strike-slip type, which is consistent with the main shock's focal mechanism solution; 3)In the earthquake source area, the principal compressive stress and the principal tensile stress are both near horizontal, and the principal compressive stress is near east-west direction, while the principal tensile stress is near north-south direction. The Jiuzhaigou earthquake is a strike-slip event that occurs under the horizontal compressive stress. 相似文献
14.
四川龙泉山断裂带变形特征及其活动性初步研究 总被引：9，自引：3，他引：6
文中通过野外调查和地震反射剖面研究,获取了龙泉山断裂带的变形特征。龙泉山断裂带主逆冲断层位于龙泉山背斜的西翼,具有明显的分段性特征,北段与南段断层面倾向NW,断续分布;中段断层面倾向SE,形成典型的断层传播褶皱,并且断层已经沿背斜前翼膝折带的轴突破,形成贯通的突破断层。因此,中段构成了龙泉山断裂的主体。地貌对断裂活动性的响应表明龙泉山断裂早更新世—晚更新世有过一定的活动,晚更新世以来活动速率较低,且活动性具有从南向北逐渐减弱的趋势 相似文献
15.
STUDY ON SOURCE PARAMETERS OF THE 8 AUGUST 2017 M7.0 JIUZHAIGOU EARTHQUAKE AND ITS AFTERSHOCKS,NORTHERN SICHUAN 下载免费PDF全文
下载免费PDF全文 WU Wei-wei WEI Ya-ling LONG Feng LIANG Ming-jian CHEN Xue-fen SUN Wei ZHAO Jing 《地震地质》1979,42(2):492-512
On August 8, 2017, a strong earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, northern Sichuan. The earthquake occurred on a branch fault at the southern end of the eastern section of the East Kunlun fault zone. In the northwest of the aftershock area is the Maqu-Maqin seismic gap, which is in a locking state under high stress. Destructive earthquakes are frequent along the southeast direction of the aftershocks area. In Songpan-Pingwu area, only 50~80km away from the Jiuzhaigou earthquake, two M7.2 earthquakes and one M6.7 earthquake occurred from August 16 to 23, 1976. Therefore, the Jiuzhaigou earthquake was an earthquake that occurred at the transition part between the historical earthquake fracture gap and the neotectonic active area. Compared with other M7.0 earthquakes, there are few moderate-strong aftershocks following this Jiuzhaigou earthquake, and the maximum magnitude of aftershocks is much smaller than the main shock. There is no surface rupture zone discovered corresponding to the M7.0 earthquake. In order to understand the feature of source structure and the tectonic environment of the source region, we calculate the parameters of the initial earthquake catalogue by Loc3D based on the digital waveform data recorded by Sichuan seismic network and seismic phase data collected by the China Earthquake Networks Center. Smaller events in the sequence are relocated using double-difference algorithm; source mechanism solutions and centroid depths of 29 earthquakes with ML≥3.4 are obtained by CAP method. Moreover, the source spectrum of 186 earthquakes with 2.0≤ML≤5.5 is restored and the spatial distribution of source stress drop along faults is obtained. According to the relocations and focal mechanism results, the Jiuzhaigou M7.0 earthquake is a high-angle left-lateral strike-slip event. The earthquake sequence mainly extends along the NW-SE direction, with the dominant focal depth of 4~18km. There are few shallow earthquakes and few earthquakes with depth greater than 20km. The relocation results show that the distribution of aftershocks is bounded by the M7.0 main shock, which shows obvious segmental characteristics in space, and the aftershock area is divided into NW segment and SE segment. The NW segment is about 16km long and 12km wide, with scattered and less earthquakes, the dominant focal depth is 4~12km, the source stress drop is large, and the type of focal mechanism is complicated. The SE segment is about 20km long and 8km wide, with concentrated earthquakes, the dominant depth is 4~12km, most moderate-strong earthquakes occurred in the depth between 11~14km. Aftershock activity extends eastward from the start point of the M7.0 main earthquake. The middle-late-stage aftershocks are released intensively on this segment, most of them are strike-slip earthquakes. The stress drop of the aftershock sequence gradually decreases with time. Principal stress axis distribution also shows segmentation characteristics. On the NW segment, the dominant azimuth of P axis is about 91.39°, the average elevation angle is about 20.80°, the dominant azimuth of T axis is NE-SW, and the average elevation angle is about 58.44°. On the SE segment, the dominant azimuth of P axis is about 103.66°, the average elevation angle is about 19.03°, the dominant azimuth of T axis is NNE-SSW, and the average elevation angle is about 15.44°. According to the fault profile inferred from the focal mechanism solution, the main controlling structure in the source area is in NW-SE direction, which may be a concealed fault or the north extension of Huya Fault. The northwest end of the fault is limited to the horsetail structure at the east end of the East Kunlun Fault, and the SE extension requires clear seismic geological evidence. The dip angle of the NW segment of the seismogenic fault is about 65°, which may be a reverse fault striking NNW and dipping NE. According to the basic characteristics of inverse fault ruptures, the rupture often extends short along the strike, the rupture length is often disproportionate to the magnitude of the earthquake, and it is not easy to form a rupture zone on the surface. The dip angle of the SE segment of the seismogenic fault is about 82°, which may be a strike-slip fault that strikes NW and dips SW. The fault plane solution shows significant change on the north and south sides of the main earthquake, and turns gradually from compressional thrust to strike-slip movement, with a certain degree of rotation. 相似文献
16.
LATE QUATERNARY ACTIVITY OF THE CENTRAL SEGMENT OF THE DARI FAULT AND RESTUDY OF THE SURFACE RUPTURE ZONE OF THE 1947 M73/4 DARI EARTHQUAKE,QINGHAI PROVINCE 下载免费PDF全文
下载免费PDF全文 Bayan Hara Block is one of the most representative active blocks resulting from the lateral extrusion of Tibet Plateau since the Cenozoic. Its southern and northern boundary faults are characterized by typical strike-slip shear deformation. Its eastern boundary is blocked by the Yangze block and its horizontal movement is transformed into the vertical movement of the Longmen Shan tectonic belt, leading to the uplift of the Longmen Shan Mountains and forming a grand geomorphic barrier on the eastern margin of the Tibet Plateau. A series of large earthquakes occurred along the boundary faults of the Bayan Hara Block in the past twenty years, which have attracted attention of many scholars. At present, the related studies of active tectonics on Bayan Hara Block are mainly concentrated on the boundary faults, such as Yushu-Ganzi-Xianshuihe Fault, East Kunlun Fault and Longmen Shan Fault. However, there are also some large faults inside the block, which not only have late Quaternary activity, but also have tectonic conditions to produce strong earthquake. These faults divide the Bayan Hara Block into some secondary blocks, and may play important roles in the kinematics and dynamics mechanism of the Bayan Hara Block, or even the eastern margin of the Tibet Plateau. The Dari Fault is one of the left-lateral strike-slip faults in the Bayan Hara Block. The Dari Fault starts at the eastern pass of the Kunlun Mountains, extends eastward through the south of Yalazela, Yeniugou and Keshoutan, the fault strike turns to NNE direction at Angcanggou, then turns to NE direction again at Moba town, Qinghai Province, and the fault ends near Nanmuda town, Sichuan Province, with a total length of more than 500km. The fault has been considered to be a late Quaternary active fault and the 1947 M73/4 Dari earthquake was produced by its middle segment. But studies on the late Quaternary activity of the Dari Fault are still weak. The previous research mainly focused on the investigation of the surface rupture and damages of the 1947 M73/4 Dari earthquake. However, there were different opinions about the scale of the M73/4 earthquake surface rupture zone. Dai Hua-guang(1983)thought that the surface rupture of the earthquake was about 150km long, but Qinghai Earthquake Agency(1984) believed that the length of surface rupture zone was only 58km. Based on interpretation of high-resolution images and field investigations, in this paper, we studied the late Quaternary activity of the Dari Fault and the surface rupture zone of the 1947 Dari earthquake. Late Quaternary activity in the central segment of the Dari Fault is particularly significant. A series of linear tectonic landforms, such as fault trough valley, fault scarps, fault springs and gully offsets, etc. are developed along the Dari Fault. And the surface rupture zone of the 1947 Dari earthquake is still relatively well preserved. We conducted a follow-up field investigation for the surface rupture zone of the 1947 Dari earthquake and found that the surface rupture related to the Dari earthquake starts at Longgen village in Moba town, and ends near the northwest of the Yilonggounao in Jianshe town, with a length of about 70km. The surface rupture is primarily characterized by scarps, compressional ridges, pull-apart basins, landslides, cleavage, and the coseismic offset is about 2~4m determined by a series of offset gullies. The surface rupture zone extends to the northwest of Yilonggounao and becomes ambiguous. It is mainly characterized by a series of linear fault springs along the surface rupture zone. Therefore, we suggest that the surface rupture zone of the 1947 Dari earthquake ends at the northwest of Yilonggounao. In summary, the central segment of the Dari Fault can be characterized by strong late Quaternary activity, and the surface rupture zone of the 1947 Dari earthquake is about 70km long. 相似文献
17.
研究了缅甸山弧附近的中源地震分布,发现h>70km的地震主要分布在20°N-27°N之间,形成明显的条带分布,24°N以南走向近南北,24°N以北走向逐渐接近NE;通过垂直剖面的研究,发现缅甸山弧下的Benioff带形态是变化的,在南北两端倾角较小,且较为平直,延伸深度浅,小于100km;在地震带的中间部分,Benioff带的倾角逐渐加大,且倾角随深度加深而增大,延伸深度可达180km。在一些剖面上出现双地震层,一般出现在45-100km的深度范围内,两层间的距离从10-25km不等;在同一剖面上,两层间在浅部间距大,在深部间距小。研究了沉降带上的应力状态,发现沉降带上P轴的优势方向位于NE-SW,T轴分布较分散;P、T轴随深度没有明显变化;在上地震层中,T轴明显接近于Benioff带的倾向;通过地壳内及沉降带上地震机制解的对比,发现前者的优势方向相对于后者逆时针旋转了一定角度。 相似文献
18.
CHARACTERISTICS OF TECTONIC STRESS FIELD OF THE XIAOWAN RESERVOIR BEFORE AND AFTER THE IMPOUNDMENT 下载免费PDF全文
下载免费PDF全文 Using the seismic waveform data of Xiaowan seismic network and Yunnan seismic network, we determined the focal mechanisms of 36 earthquakes(ML ≥ 3.0)from Jun. 2005 to Dec. 2008 and 51 earthquakes(ML ≥ 2.5)from Jan. 2009 to Dec. 2015 by generalized polarity and amplitude technique.
We inverted tectonic stress field of the Xiaowan reservoir before impounding, using the focal mechanisms of 36 earthquakes(ML ≥ 3.0)from Jun. 2005 to Dec. 2008 and CAP solutions of 58 earthquakes(ML ≥ 4.0)collected and the solutions in the Global Centroid Moment Tensor(GCMT)catalog; We inverted local stress field of the reservoir-triggered earthquake clustering area, using 51 earthquakes(ML ≥ 2.5)from Jan. 2009 to Dec. 2015.
Focal mechanisms statistics show that, the Weixi-Qiaohou Fault is the seismic fault. Focal mechanisms were strike-slip type in initial stage, but normal fault type in later stage. Focal depths statistics of 51 earthquakes(ML ≥ 2.5)show that, the average value of focal depths in period Ⅰ, period Ⅱ and period Ⅲ are 8.2km, 7.3km and 7.8km respectively and the standard deviations are 4.3km, 3.5km and 6.0km respectively. The average value of focal depths is basically stable in different period, only the standard deviation is slightly different. Therefore, there is not positive connection between focal depth and deviation of focal mechanisms. What's more, there are 2 earthquakes(number 46 and number 47 in Fig.5 and Table 3)with almost the same magnitude, epicenter and focal depth, but they have different faulting types as normal and strike-slip. The focal mechanism of event No.46 is strike:302°, dip:40° and rake:-97° for plane Ⅰ, however, the focal mechanism of event No.47 is strike:292°, dip:82° and rake:140° for plane Ⅰ. Likewise, earthquake of number 3 and number 18 have similar characteristic. Therefore, the obvious focal mechanism difference of similar earthquake pair indicates the complexity of Weixi-Qiaohou Fault.
Considering the quiet-active character of reservoir-triggered earthquakes, we discussed the change of local stress field in different period. The σ1 of tectonic stress field was in the near-south direction, with a dip angle of 14° before the impoundment, however, the direction of σ1 of local stress field changed continuously, with the dip angle getting larger after the impoundment. The direction of σ1 of local stress field of reservoir-triggered earthquake clustering area is close to the strike of Weixi-Qiaohou Fault, and reservoir impoundment increased the shear stress in the fault, so the weakening of fault was beneficial to trigger earthquakes. Comprehensive analysis suggests that fluid permeation and pore pressure diffusion caused by the water impounding, and the weakening of fault caused by local stress field are the key factors to trigger earthquake in the Xiaowan reservoir. 相似文献
19.
RELOCATION OF MAIN SHOCK AND AFTERSHOCKS OF THE 2014 YINGJIANG MS5.6 AND MS6.1 EARTHQUAKES IN YUNNAN 下载免费PDF全文
下载免费PDF全文 Yingjiang area is located in the China-Burma border,the Sudian-Xima arc tectonic belt,which lies in the collision zone between the Indian and Eurasian plates.The Yingjiang earthquake occurring on May 30th,2014 is the only event above MS6.0 in this region since seismicity can be recorded.In this study,we relocated the Yingjiang MS5.6 and MS6.1 earthquake sequences by using the double-difference method.The results show that two main shocks are located in the east of the Kachang-Dazhuzhai Fault,the northern segment of the Sudian-Xima Fault.Compared with the Yingjiang MS5.6 earthquake,the Yingjiang MS6.1 earthquake is nearer to the Kachang-Dazhuzhai Fault.The aftershocks of the two earthquakes are distributed along the strike direction of the Kachang-Dazhuzhai Fault (NNE).The rupture zone of the main shock of Yingjiang MS6.1 earthquake extends northward approximately 5km.The aftershocks of two earthquakes are mainly located in the eastern side of the Kachang-Dazhuzhai Fault with a significant asymmetry along the fault,which differ from the characteristics of the aftershock distribution of the strike-slip earthquake.It may indicate that the Yingjiang earthquakes are conjugate rupture earthquakes.The non-double-couple components are relatively high in the moment tensor.We speculate that the Yingjiang earthquakes are related to the fractured zone caused by the long-term seismic activity and heat effect in the deep between Kachang-Dazhuzhai Fault and its neighboring secondary faults.Aftershock distribution of the Yingjiang MS6.1 earthquake on the southern area crosses a secondary fault on the right of the Kachang-Dazhuzhai Fault,suggesting that the coseismic rupture of the secondary fault may be triggered by the dynamic stress of the main shock. 相似文献
20.
通过地震分布及地震机制解所反映的日本海-鄂霍次克海俯冲带的形态及应力状态,研究了俯冲带深部形变及650km间断面的穿透问题.日本海Benioff带较直,连续性较好;鄂霍次克海Benioff带弯度稍大,220-320km深度之间地震很少.两俯冲带在浅部及深部地震密集,100-200km深度之间有双地震层.应力状态随深度变化,200km深度以下P,T轴方向相对集中,P轴接近俯冲方向,在约100-200km深度附近,P,T轴均接近俯冲方向.观测和理论地震图拟合分析表明,地震断层面走向接近俯冲带走向,断裂的结果使俯冲带在深部倾角变小. 相似文献